Rebuilding a Engcon Tiltrotator to get correct coupling
Вставка
- Опубліковано 15 січ 2025
- Rebuilding an Engcon EC10 with Hydrema Quick coupling to s45 (Swedish standard) For my takeuchi excavator
00:05 Explaining the project
01:33 Starting disassembly
03:16 Stealing the quick coupler from the old excavator
04:47 Cleaning the quick coupler
05:37 Replacing quick coupler
09:20 Dissembling the Tiltrotator
21:16 Making the swivel bigger to fit the quick coupler
37:20 Painting the swivel
39:24 Preparing worm gear
40:25 Cleaning remaining parts
42:03 Preparing and painting rotator frame
44:10 Making the upper frame bigger to fit the bucket coupler
46:50 Painting the upper frame
47:57 Starting reassembly
55:03 Adding stickers
57:39 Testing the Tiltrotator
59:37 Presenting the mosquito magnet
1:00:00 Further testing
1:01:14 Project wrap up
Titles made by @madstowt
When you cut away this tiltrotator... I told OMG this is very sketchy. Then you started to extend the parts and I said. DAAAAAAM this guy is supersmart and brave and talented.
Awesome build, congratulations!
Hej tack. Enjoyed your video and have subscribed after watching you do your work and also showing the countryside. Its nearly 50 years since my freind and I travelled around Sweden for a couple of months and absolutely loved the counry and the people. Brought back some good memories. We live just south of Cambridge in the uk. Thanks again.
You are fearless how you rip into that. Great work and excellent video. Thanks.
Great job young man ! You are really brilliant and hard worker. You have beaten engcon. Really hat's off to you. 👏👏👏👏👏💐💐💐💐💐
Good content 👍🏼. You are clearly a hard worker to have such equipment, tools, shop… at a relatively young age. Keep up the good work. I love Andrew’s content also but it seams the Swedish version of Andrew thinks through his problems a bit better lol.
No chainsaws to install cd players??
It is interesting to see how those are built. It's good that you video yourself doing it, can always watch the video to see how it goes back together. I usually take alot of photos when I'm working on something with alot of parts that have to go back together a certain way.
Best utube channel out there! Nothing like ingenuity.
Gotta love a man that takes great care of his machines
Hi,I admire you're commitment to you're equipment and all the mechanical plant in the workshop,wish you stayed near me would love to spend a couple of days working alongside you please keep up the good work,bonus for me is when you weld it's stick welding, I know you also do mig regards for now all the best from Scotland ⚙️⚒️🏴🇬🇧
Awesome job. I was hooked from start to finish. 😊😊
00:05 Explaining the project
01:33 Starting disassembly
03:16 Stealing the quick coupler from the old excavator
04:47 Cleaning the quick coupler
05:37 Replacing quick coupler
09:20 Dissembling the Tiltrotator
21:16 Making the swivel bigger to fit the quick coupler
37:20 Painting the swivel
39:24 Preparing worm gear
40:25 Cleaning remaining parts
42:03 Preparing and painting rotator frame
44:10 Making the upper frame bigger to fit the bucket coupler
46:50 Painting the upper frame
47:57 Starting reassembly
55:03 Adding stickers
57:39 Testing the Tiltrotator
59:37 Presenting the mosquito magnet
1:00:00 Further testing
1:01:14 Project wrap up
I have been watching the video with the rock smasher, and now with the ecavator work. I gues you have saved a he... lot of money compared that som one should have don it for you. You deserv standing ovating (applaus)😃😄😁😅🙂🙃😉😊
Thank you!
TIM from Canada if you are disassembling houses from any unit best thing to do use coloured twist ties….
or if you have any coloured yarn or string, this helps. Anything colourful you can tie from your hoses to your unit of choice. This will help you assembling your hoses in the future….
Jäkligt bra gjort och trevligt att vi fick följa med på resan! Såg att du också är från min mors hemtrakter, hon är uppvuxen i Korpis.
You did a very very good job. A german craftsmaster.
Great job done on the swivel a lot of work but you got it done great video as well yes it is a bonus when the temp drops no bugs i like it .Thank you for sharing
Well I was thinking this man is a combination of Andrew Camarata en Curtis from CEE and I was reading the comments and I was not the first one to notice. Nice videos! Greetings from Belgium!
If you want to revive old stickers or even tape, put them in a microwave for 30 sec stints until the glue feels good again. Even works on old Biltema masking tape that sucks out of the store ;)
Thanks for the tip, Will try that!
Awesome video! also MacGyver Theme at 45.01 is very fitting!!
That thing is so cool...Great job my Man👍👍
amazingly complex. Congratulations on figuring it out
Thanks Jim!
Não pensei que fosse um vídeo tão incrível quando vi a Tumbnail, mas aí está um ótimo conteúdo.
wow you did a very very good job on that head really impressed with your knowlage. just found your channell and subbed. ive been a welder for 40 years and have a small machine shop which i do as a mid leval home hobbyist and have lots of fun welding and machining things, keep up the great videos i have to say you are a real go--getter and i wish i had your knowlage when i was your age. im 63 now and am very impressed with the way you work. and i love your shop and all the equipment you have. thumbs up. im from ontario canada in case you were wondering.
Thanks Jamie!
I heard you whistling the McGyver melody! Great video.
Great videos! So happy finding your channel!
Absolute genius, it's not big enough so I'll just make it longer so it fits my buckets. 👍
You do a great job! Thank you for the great video.
Thanks for watching!
Nice Škoda Felicia PickUp!
I really enjoy the video Matt!!,, 👍👊👊
Great job. And regarding the pain you kinda converted an ENCON to a ROTOTILT by swapping the paint, a good upgrade ;)
fantastic job congratulations even doing the work you spent a lot of money on parts but I imagine it will be cheaper than new.
Greetings from Portugal
Thanks! Yeah a new one would be crazy expensive, i paid small money in comparison. Greetings from Sweden!
You are very talented at what you do and I enjoy your videos and seeing another part of the world.
Thanks!
And this is how you make Engcon to look like Marttiini :D
The red looks good. I bet the thin coats will hold up better. Anyway, once it is in the field, no one will notice the brush marks.
This man is the Swedish Andrew Camarata.
Mixed with my other favourite youtber Kurtis on CEE
Thanks for the compliment!
I agree! Really entertaining videos! 😃
@Michael McBride : I wouldn't really say that... As far as lots of projects, sure. But this guy actually fixes stuff right. He may purchase used stuff, but he repairs it like it should be done and doesn't half-ass a repair just to keep on driving junk crap. Don't get me all wrong here though... I watch a lot of Andrews videos and I'm a subscriber. But I find myself shaking my head a lot when I watch Andrews videos; like when he almost wrecked that newer rock truck he just got It's almost like he enjoys driving beat up shit.
But anyway... I've only watched a few of this guy's videos based on YT recommendations, and I've of course subscribed to this channel. It's actually way, way less stressful (for me) watching this guy because he's more my style in the way he repairs things so they no longer look, sound and drive like they are beat up crap. Take this video for instance... Andrew never would have painted this at the end, let alone doing it in the correct color so it matched the machine and actually looked great. This guy here is awesome, and I look forward to binge watching his videos to get caught up.
@@johan5453: Don't forget the guys over at C&C Equipment. ;-))
Your fabrication is most impressive!
Nice job man..love from india 🇮🇳
È bello vedere che lavori bene... complimenti 👍💪💪
Great job Matt👌
No money wasted for overpriced aftermarket parts.. I had old Ec10 on my previous Lännen 940, servicing that engcon becama familiar 😀
42:00 There are special Disks for removing paint: 3M 51889 ;) .. just make shure to use a grinder with variable speed and set it to 1 - the disk will last much, much longer
Nån som önskar han hade en indexator! 😄 Snyggt jobbat med snurran!
51:47 ....not Mozart.....Beethoven 😉😁
Interesting that you listed the part prices. Very expensive. Of course these are heavy parts made in relative low numbers, but selling parts sure is a good way to make money for dealers and manufacturers.
Fortsätt gör det du gör. Du är fantastisk på att skruva och filma. 👍🏻
Tack för komplimangen!
Håller med! Som någon skrev innan, en svensk Camarata. Dock skulle jag säga mycket seriösare!
Gillar lugnet 😺
@@jfjjjjfj har hört många säga det, har dock aldrig tittat på Camarata, men tittat mycket på och gillar Diesel Creek och denna kanal får två tummar upp (hade get fler om jag hade fler), väldigt seriös och duktig den där Björnström!
4:35 wow you have a Škoda auto, Škoda felicia pick up from my country from Czech republic, old car, but very good working car, easy to repair, easy to ride. Like student, i learn repairing all on this car. This type is like hatchback, long version, 1.3, 1.6, 1.9diesel, they building it like rally car like: Felicia kit car.
Use a centre punch and small set of stamps on fittings and hose to line up where they go ... 1 dot, 2 dots, or the stamps... 1, 2, 3, 4 or a.b,c,d etc....
Swedish people are awesome everything they build is built rite. You sir are awesome!! What u listening to in those ear muffs?
That's hearing protection
I'd love a q and a video - like what do you do for a day job. is this your shop? where is your pupper?
A Very Rare person whose brain actually works extremely well and put to good use.
Do you have any information on the mosquito catcher ? Also great overhaul job , you aren't afraid to go in to anything!
It's a Mosquito magnet - pioneer
The best thing with standards is that there are so many to choose from 😂
Haha precis!
Brilliant ⚙️
Thank you for sharing the job! I like the fact that you added captions; your English is fine of course but they're great if someone wants them translated.
Great work, well done 👍
👍👍👍👍💥
Esab Rogue rules!
Great video!
Greetings from Poland.
Thanks Pawel!
@@M.BJOERNSTROEM 🙋♂
🍾🥂🍾
Great videos Matt!
Amazing job
Riktigt imponerad!👌
Just subbed love the content!
Did you mention painting the rotator rototilt-red when talking to the engcon mechanic 😂
Kind of forgot that part!
❤❤❤❤❤❤
Good Work 💪
Good job mate 👍👍👍
Thanks!
You should use yelleow primer before you paint with the red color.
Great job on the conversion. Would you have been able to weld in 10cm ‘packers’ into the non moving jaw? Matching profile to fit into the fixed jaw, with matching profile to fit around the bucket pin.
Awesome Mod. Job!👍
Thanks!
Good job 👍
What paint are you using? Great that it doesn’t need a primer
så otroligt kunnig du är. vars har du lärtdig allt?
Tack David! Brukar använda tankesättet "Hur svårt kan det vara" och testa mig fram. Betyder inte att man alltid lyckas, men man lär sig alltid något nytt.
No way you have Skoda Felicia, it was my first car. I bursted out laughing when i saw that :D
Its a good working horse
please don't let your talent be wasted get a young lad in with you and teach him all you know for a young man yourself love your work
This is creepy and weird
@@Dysiodewhat is creepy and wired about teaching or passing on the knowledge you have to the next generation
This is ironic. At first I thought what you did was a crude hack job you managed to get into alignment. Then I saw a video of tiltrotators made in a major factory. Their tolerances were worse than yours with numerous pieces tacked on to hold parts in alignment - some very poorly. And then the entire assemblies were MIG welded without bevels while all your critical pieces including scabbed in were 100% penetration stick welds. VERY impressive.
An aside. Locally we call those devices Tilt-a-whirls after the amusement park rides.
🔝🔝🔝
The hydraulic loom gives me big “Doc Oc” energy
당신은 👍 입니다 정말 대단해 보이십니다
저도 유튜브 보고 배우고 있습니다
감사
A fine pair of safety crocs
This isn't the first job you do when you're happily coming home with the Lidle stickwelder.
ESAB welder for the win 👍🏻
Great stuff mate
If it were me doing the work, the chances of everything going back where it came from would be zero.
Jag trodde, när du började ta isär den komplicerade grejen och kapa i den, att det här kommer inte att gå bra. Jag fick skämmas; det blev kanon! Du har resurser och självförtroende och jävlaranamma för såna projekt. Bra jobbat!
Var det här på plats i ditt nya garage?
Are you a engineer or just a guy with big brain 🧠 , love you from iraq
Did you replace all the parts you kept mentioning? Like the worm gear?
No, i just had the price list available and thought it would be fun to see. I personally like to see prices in videos i watch, i think it gives more context
we have the same rototilts as wich you are making, why not migweld the whole thing?
Lovely old job
You're on the way to becoming a master mechanic. It's kind of a waste of talent to keep being an operator unless the job requires special skills.
Bra jobbet :)
why don't you first use 1 or 2 layers of primer, that will hold the paint layer better
very nice work !!!! you like MIG or MMA ?? Alban
Thanks, I prefer MIG, Need to buy me one! witch do you prefer?
bonjour Mr Bjoemtroem , je suis un vieux mécanicien , je préfère la soudure a l arc , car dans mon travail je soude de tous ... acier inox vieille fonte et rechargement Alban
wow enough grease in there good rebuild
Realy nice JOB!!! :D
Thanks!
Your fabrication skills are suppperrrrbbbbb!!!!!! Henry Ford would have liked you, he liked black paint...
Frankly, I like your red paint. Your grease smearing skills look pretty good also. Were you good at mud pies???? LOL
I'm not any good at video games either. I didn't do to bad on some simulators for crawlers and regular trac hoes at Caterpillar's Visitor's Center in Peoria, IL.
MacGyver theme tune! :)
@17m 30s
toujours du bon travail
I see that you like electrode welding and you are doing really well. Do you also play tig? And for God's sake, do something with this fall on a manual pallet jack :D And a video by the way :D :D :D
Been thinking about buying a tig and learning it, but as is now it's mostly Stick and MAG. I totally agree with you, it's really annoying when it's falling!
It's strange that it's not the same standard between Sweden and Denmark. Isit sow between Noeway and thee other to countrys also?
I'm not sure how it is in norway
@@M.BJOERNSTROEM They use salmons for measuring (not bananas) after gutting in China!!
😊👍👍
Tycker inte han jobbar som Andrew C. Andrew använder slägga, spett o grävmaskin när han reparerar. M använder huvudet, btw mkt fint arbete. 👍👍
You are good!!! How can you remember where everything goes? Just to watch you get your work done. Could you talk a little bit about yourself?
I also thaught that your work and videos look a lot like those from Andrew. I have to say, I love them, from both of you. I saw you grease the rotater and there is nothing wrong with that amount of grease, but when you are greasing bearings, be aware that you don't use too much grease. I've been professionaly working, 36 years, for the Dutch part of Svenska Fläkt and the companies that took over. And i have seen more bearings die, because of too much grease than too little. Have you ever seen how little grase SKF puts in their fully closed bearings like the 2RS types?