paano pong conversion ang gagawin kung ang given po sa amin ay 10,000 meters ang length at 18,000 ang width? 'di po kasi inindicate sa amin kung ano ang scale ratio. pag po ba 'di given ang scale ratio, kami na po ang mag eestimate nun? marami pong salamat!
@@alizacasimsiman4993 go to this link for the complete video po., ua-cam.com/video/-GUWmJWO41Y/v-deo.html sorry, kasi putol etong video na napanood mo at dko alam kung bat nagkaganun.
Please be specific po..anu ba yung snsbi mo na nabili mo?scale ruler ba?kasi ay wala naman pa akong nakitangbisa lang angbscale na nakalagay na 1:100 lang,(unless it is an ordinary ruler)idahil usually ay anim agad ang nakalagay na scale sa isang ruler,somrtimes may 8,or 10 dun sa mga natutupi na parang old measuring instrument.
The 4.00 M is the dimension on thr example plan. It is not a factor so its not important whatever the figure is..I just used it as an example plan and printed it on different scales to show how the scale works..
@@thinkingarchitect9084 may i ask sir, in a 1:300 scale i use 3000m as the dimension of my elevatoion, what if i use a 1:30 will it change into 300m instead of 3000m? Because scaling is just adding or subtracting zeros do they?
Please nake your question clear..did you use 1:3000 to draw elevations?it is too small..in 1 millimeter is equivalent to 3 meters if you scale by 1:3000.. Regarding to 1:30..YES you can used either 1:3000 or 1:300 scale..just remove the two zeros if you use 1:3000, therefore the 100 m on scale will be turned into 1m with a scale of 1:30.. And,if you use 1:300:just remove one zero..so the 10 meters in 1:300 will be turned into 1meter with a scale of 1:30.. I hope you understand..if its not please.sak again.thanks.
@@thinkingarchitect9084 my apologies for being confusing on my question but you still managed to answer the question properly, that's widely eniugh for em to understand the use of scale. Thank you!
hello.,please go to this link., ua-cam.com/video/-GUWmJWO41Y/v-deo.html kasi po sa hindi ko malamang dahilan ay nawalan ng sound yang video na napanood mo ,eto po yung updated para mas maintindihan mo.,nandyan ang kasagutan po sa tanung mo. Anyway to make it sure po: 1:250 ba ang tinatanung mo talaga or 1:25? kasi po ang 1:250 ay maliit na yan at usually at sa malalaki o malalawak na building plans na gnagamit yan,or sa site development plan. by the way, ang 1:250 ay 1 cm = 2.5 meters
wala pa akong nakita na mas specified na 1:27 na nasa ruler scale..pero yan ay magagamit ayun sa settings mo sa autocad..Ganun man,kapag sukatin mo yan sa drawing ay : 1 cm = 270 mm 27 cm or 0.27 i hope natulungan kita..
Grabi ang liwanag pag explained. God bless
Gd am Po may natutuhan Po ako sa Inyo at malinaw Po Ang pag explain nyo thanks Po Godbless Po at ingat lng plge
thankyou sirr now kolang na gets T^T
Tamsak done
paano pong conversion ang gagawin kung ang given po sa amin ay 10,000 meters ang length at 18,000 ang width? 'di po kasi inindicate sa amin kung ano ang scale ratio.
pag po ba 'di given ang scale ratio, kami na po ang mag eestimate nun?
marami pong salamat!
Message me po sa roger17063@gmail.com to explain better for you.
@@thinkingarchitect9084 good day po! nakapag send na po ako ng email. thank u po!
@@alizacasimsiman4993 go to this link for the complete video po.,
ua-cam.com/video/-GUWmJWO41Y/v-deo.html
sorry, kasi putol etong video na napanood mo at dko alam kung bat nagkaganun.
Hi kuya, tanong lang, tama po ba nabili ko nakalagay kase 1:100cm?
Please be specific po..anu ba yung snsbi mo na nabili mo?scale ruler ba?kasi ay wala naman pa akong nakitangbisa lang angbscale na nakalagay na 1:100 lang,(unless it is an ordinary ruler)idahil usually ay anim agad ang nakalagay na scale sa isang ruler,somrtimes may 8,or 10 dun sa mga natutupi na parang old measuring instrument.
Thanks
welcome..
Tank you. Sir
welcome.
Waht does 4.00 means?
The 4.00 M is the dimension on thr example plan. It is not a factor so its not important whatever the figure is..I just used it as an example plan and printed it on different scales to show how the scale works..
@@thinkingarchitect9084 may i ask sir, in a 1:300 scale i use 3000m as the dimension of my elevatoion, what if i use a 1:30 will it change into 300m instead of 3000m? Because scaling is just adding or subtracting zeros do they?
Please nake your question clear..did you use 1:3000 to draw elevations?it is too small..in 1 millimeter is equivalent to 3 meters if you scale by 1:3000..
Regarding to 1:30..YES you can used either 1:3000 or 1:300 scale..just remove the two zeros if you use 1:3000, therefore the 100 m on scale will be turned into 1m with a scale of 1:30..
And,if you use 1:300:just remove one zero..so the 10 meters in 1:300 will be turned into 1meter with a scale of 1:30..
I hope you understand..if its not please.sak again.thanks.
@@thinkingarchitect9084 my apologies for being confusing on my question but you still managed to answer the question properly, that's widely eniugh for em to understand the use of scale. Thank you!
Sir paano po ba ito 1:250?
Paano po ba ito basahin
hello.,please go to this link.,
ua-cam.com/video/-GUWmJWO41Y/v-deo.html
kasi po sa hindi ko malamang dahilan ay nawalan ng sound yang video na napanood mo ,eto po yung updated para mas maintindihan mo.,nandyan ang kasagutan po sa tanung mo.
Anyway to make it sure po: 1:250 ba ang tinatanung mo talaga or 1:25? kasi po ang 1:250 ay maliit na yan at usually at sa malalaki o malalawak na building plans na gnagamit yan,or sa site development plan.
by the way, ang 1:250 ay
1 cm = 2.5 meters
Paano po q 1 27 scale
wala pa akong nakita na mas specified na 1:27 na nasa ruler scale..pero yan ay magagamit ayun sa settings mo sa autocad..Ganun man,kapag sukatin mo yan sa drawing ay :
1 cm = 270 mm
27 cm
or 0.27
i hope natulungan kita..