Scott im 26 years old and ive been working at a small engine repair shop for 4 years now and doing it in general for about 7 years altogether. I struggled with doing 2 stroke euipment untill i found your channel you have taught me a lot and have helped me do more professional repairs and diagnoses so thank you
I love these videos. It gave me the courage to fix my oil leak on my Husqvarna 340 when I found the video so huge thanks and I had only basic tools and still got clutch assembly out and in and saw works. Don't need to take it to a pro like you. This is really educational content.👍
I’ve had Husqvarna 350 for 6-7 years now, Got it for $20 at garage sale. Pretty sure it’s a mid 90’s model and it runs great. My buddy bought a brand new Stihl wood boss saw and his saw broke down after 3 hours of hard cutting and my mid 90’s husqvarna kept going without skipping a beat!
Great catch on linkage that somthing to watch for i bought one one of these saws for $15 because it was locked up fill it full croil let it it sit for along time took off muffler drained it got it turn over then to crank run good has rattle in bottom end going work on it more later😊😊😊😊
My first thing on those saws is get rid of the plastic intake boot clamp and replace with metal one as they are destiny to fail! Good stuff see ya next time!
Great video Scott! Your video's always help me put more tips in my mental check list when working on saws. You take trade in saws? OMG I have to pack up some saws, (all perfect) and come up to see the dealership! Then I can go over to the display saws and say, "I want one of those, and one of those, and one of those".
I am working on a husq. 435 wished I had two. this one needed the carb rebuilt and had a bad fuel line. had spark, ran a few sec. then could not adjust carb it had an air leak I though all the cylinder screws were missing still don't know how it ran at first.
Hey bud are you coming to EQUIP expo? Id love to meet you in person its the biggest green industry show in the world your dealership can get you an exclusive pass its in KY look it up i know folks from youtube would love to shake your hand.
Scott im 26 years old and ive been working at a small engine repair shop for 4 years now and doing it in general for about 7 years altogether. I struggled with doing 2 stroke euipment untill i found your channel you have taught me a lot and have helped me do more professional repairs and diagnoses so thank you
Thanks for your comment. I'm glad to hear these videos are helping people out.
I really love watching you fix whatever comes through the door. Gotta be the coolest dude on youtube. 😊
@jeffreyullmer2831 Not sure about that but I appreciate the kind words. Thanks for watching!
I could watch these all day 👏👏
You should!
I love these videos. It gave me the courage to fix my oil leak on my Husqvarna 340 when I found the video so huge thanks and I had only basic tools and still got clutch assembly out and in and saw works. Don't need to take it to a pro like you. This is really educational content.👍
I'm glad to hear your repair went well!
I got one of your carb stands. Really nice and clean build. Thank you…and some stickers too.
I'm glad you like it. Thanks for supporting the channel!
It was nice chatting with you yesterday. Blower works awesome. Gavin almost blew over when using it.
@@BertsCustomCuts Glad to hear you like it. You'll find a lot of uses for it.
I’ve had Husqvarna 350 for 6-7 years now, Got it for $20 at garage sale. Pretty sure it’s a mid 90’s model and it runs great. My buddy bought a brand new Stihl wood boss saw and his saw broke down after 3 hours of hard cutting and my mid 90’s husqvarna kept going without skipping a beat!
I really like the 350
I was anxious to see the bar oil pump work, but I'm sure you checked that...! Good repair Scott!
Great catch on linkage that somthing to watch for i bought one one of these saws for $15 because it was locked up fill it full croil let it it sit for along time took off muffler drained it got it turn over then to crank run good has rattle in bottom end going work on it more later😊😊😊😊
Bummer about the rattle.
Excellent!😀
When I read twins, I knew this was going to be a good one. Thanks Scott.
@@themowershop5373 I think I did one other twofer video but can't remember what it was. Thanks for watching!
Glad you could get one out of the two going, Scott 👍🏼. It’s great that you could get one going for him.
@wayneberry8703 Another happy customer 😀
Thanks. Great stuff.
Nicely done!
Thanks!
Nice video Scott. One of the saws got a second life. Laaaaaaater.
@@larryvankirk7423 And the other is an organ donor 😀
Great chainsaws
Yep, as long as you can keep the muffler tight these are nice saws. Thanks for watching!
Good job
Love the channel brother! God Bless
Thanks for watching!
My first thing on those saws is get rid of the plastic intake boot clamp and replace with metal one as they are destiny to fail! Good stuff see ya next time!
Yes many of them have failed...poor design. That metal clamp isn't much better of a design. Its hard to install without bending it.
Great video Scott! Your video's always help me put more tips in my mental check list when working on saws.
You take trade in saws? OMG I have to pack up some saws, (all perfect) and come up to see the dealership! Then I can go over to the display saws and say, "I want one of those, and one of those, and one of those".
@@alans.4658 OH boy!
Good Morning Brother You Have a Two-Fir This Morning 😀😊
Yep, twins!
One out'a two ain't bad.
@@rooster3019 I'll try to do better next time :-)
I am working on a husq. 435 wished I had two. this one needed the carb rebuilt and had a bad fuel line. had spark, ran a few sec. then could not adjust carb it had an air leak I though all the cylinder screws were missing still don't know how it ran at first.
@@SandDsmallenginerepair I've seen them loose but not missing.
@@TheGreasyShopRag not sure how it could run with cylinder not connected
@@SandDsmallenginerepair Thats what I was thinking.
@@TheGreasyShopRag 2 stroke can be a challenge but you sure remember it if it happens. really like your vids help me relax thanks bro
@@SandDsmallenginerepair Thanks for watching!
Hello, I was wondering if you’re selling that 45 mm chainsaw for parts? Complete.
@@DanBuch-vt3rh The customer took it with him.
Hey bud are you coming to EQUIP expo? Id love to meet you in person its the biggest green industry show in the world your dealership can get you an exclusive pass its in KY look it up i know folks from youtube would love to shake your hand.
I hadn't planned to attend but I'll let you know if I change my mind. Thanks for supporting the channel!