Timestamps: 00:00 Intro 00:42 Media tab vs Project tab 01:11 Importing files 01:25 Sort through your files with Favorites 02:06 Aspect ratio and taking snapshot 02:16 Flowstate Stabilization vs Direction Lock 03:26 If Direction Lock is resulting in shaky videos 03:46 Stitching options 04:31 Media processing (color plus, clarity plus, motion ND) 05:00 Clip management (create different versions) 05:25 Trimming your video 05:34 Adding effects (motion ND, timeshift) 06:17 DeepTrack for subject tracking 07:04 KEYFRAMING 08:38 Changing the transition type 09:22 AutoFrame (automatic keyframing) 10:23 How to use export queue 10:44 Project tab 10:59 Modifying project properties 11:35 Importing media to your Project 12:28 Adding media to timeline 12:54 Modifying videos in your Project 13:10 Keyframing in the Project tab 13:43 Adding music, titles and transitions
3:55 this little bit of the video ANSWERS what I’ve been asking for years with no definitive answer I’ve been wondering about distortion compensation for using a dive case ABOVE water / or in my use case, used in particularly damaging situation such as under vehicle on gravel roads Seeing that one setting option gives me confidence the image will look reasonable VS distorted for underwater only recording use of the case
Thanks buddy! Here’s a puzzle and tip: if you want to use your dive case both underwater and above water in the same video, how do you do it? The answer is to use clip management. First, use underwater stitching and keyframe everything. Then use clip management make a duplicate clip. Then for the duplicate clip, change the stitching mode to above water. So now you have two clips: one clip uses above water and the other clip uses the underwater stitching. Then you mix the two clips in your preferred editor or the project tab. 😀
@@360vroomers Nice to know. Otherwise I would have thought the entire thing would need to be one or other ( I guess it ism thus the required clip clone )
Thank you for the video. I imported all X4 files (i had only shot a few short 4K and 5.7 videos) into the insta360 studio after installing it on my laptop. I had two issues: 1.When i played the videos, the video flow was inconsistent doing breaks all the time, so it could not run smoothly. 2. When i tried to export one ,it took 10minutes for the export progress to reach 5% I am using a 5-year old windows 11 laptop which is not bad for today's standards. Not sure what the problem is to be honest. One thing is that i do not have more than 10G free storage on the laptop drive at the moment, but i do not think it has to do with it.
@@epos_rising hi Epos. You’re right to focus on your pc specs. Does your pc have dedicated graphics (gtx 750 equivalent or better)? A dedicated GPU (as opposed to integrated GPU) is much faster and more efficient when working with 360 photos and 360 videos. If your PC has a dedicated GPU but it’s still slow, check the preferences under studio. Try checking both hardware decoder and hardware encoder. Also check the options for hardware acceleration. Finally, make sure your graphics card drivers are updated.
05:00 is there a way to batch export all of the different versions you've made? It seems like I have to export them one at a time, unless I'm missing something? Thank you :)
Has anyone figured out how to change the frame rate in the Project mode. Allowing it to match the clip rate you are adding? It seem to be greyed out at 30FPS
Really good no nonsense explanation there, thanks! . I’ve had studio and my X3 for about six months or so now. I’ve only played around with it a little bit but this past week been really getting into it and your video has helped me with a few bits I missed and didn’t realise I could do in studio. 👍
For transitions between clips, you have to select the one you want and then drag it to the split location. Once in place, you can select it and edit the length. Took me some time to figure this out since its a little different than other editors. Thanks for the video!
Two deal breakers for me. 1st one cannot combine 360 clips together in Projects. Reframed clips one can combine but not 360 clips. 2nd point is - In Media I can select Stats and configure the overlay in a 360 clip but when Exported the overlay is stripped from the video.
Thanks Vineet! I was actually doing a lot of testing with insta360, giving suggestions on studio before its release. But they suddenly changed the schedule and released it super early 🤬 which didn’t give me enough time to finish the tutorial. So that’s why this tutorial wasn’t released until yesterday.
makes sense, thats why i messaged you because i saw the video from Yuqing and was thinking I am sure Mic has had to have early access to this :) eitherways great video :) @@360vroomers
Thanks for the great tutorial! Somehow the project mode doesn't work well for me on an M2 Macbook Air. It slows to a crawl most of the time, and I usually get a beachball. For now, I'll just continue what I've been doing in the past, exporting individual videos through the Insta Studio app, and then doing the actual editing on Lumafusion.
I really enjoyed and learned more from your 15 min beginners guide than all other videos combined. Do you have videos showing how to use split screen and also how to create a video that the viewer can explore the video while watching it? Thank you
Thanks Greg! (Nice bike! I used to have a ZX636 back in the day). 1. When you say split screen, do you mean Multiview? The Multiview effect is available only when editing on the phone. To use it, just view the video you want to use Multiview with, then on the bottom of the screen with editing effects like Trim, aspect ratio, etc. look for Multiview. Then click the + sign on the right to choose the point where the multiview starts and slide the bar to the end of the multivew and press the check mark. You can then select the different multiview effects, including Split Screen. 2. To create a video that the user can explore while watching, you need to export your video as a 360 video (not a reframed video). Then you need to post the 360 video somewhere that supports 360 videos, such as youtube or DeoVR.
@gdebell_757 the explorable video (360 video) can be exported either in studio or the app. But please note that in studio, you need to use the media tab (the project tab cannot export a 360 video).
I will watch later but soo how glad to see new video)) keep going))) Thanks 🙏 it is huge update just all what wanted I still can't believe it happens because I soo wanted to have it... Have it 360 or just flat... Watch later and see)))
I have had almost all of the insta360 cameras from the beginning. The Studio software has come a long way and I am excited about that. The only thing I scream at the sky about on an hourly basis is why oh why an action camera is produced today without GPS tracking built in camera. Please don't tell me I can use my phone, gps remote by insta360, or a smart watch. All action cameras, all action cameras including cheap junk ones on Amazon have it built in. We use action cameras to do action not videos of grandparents walking in the park. I fly and don't want or need any unnecessary extra crap to carry or have the potential to fail or loose conection or more batteries to worry about. I need the telemetry data for overlays as do most action sports UA-cam creators do. I used to use Sony x3000 cameras, Garmin, and a bunch of others, but I absolutely love the color science and everything else about the insta360 product line of cameras. I currently have the X4 and the Ace Pro, and plan on picking up another X4. I literally just sold 10 other action cameras of previous models and brands. I hope the next generations of Insta360 cameras have GPS built in camera. 🙏
I can't seem to find a way to edit speed of clip sections in the project tab, or even preserve speed adjustments. For instance, I made a clip in the Media tab and slowed a section down. Then, in the Project tab, I added that clip to the timeline, but it was full speed--the whole thing. It did not transfer that slow-down. I see a way to adjust the speed of a clip in the timeline of the Project tab, but it applies to the entire clip as opposed to just a small section of it as I had done in the Media tab edit.
Same issue here. Now on version 5.3.4 but still no way to adjust a part of the clip for speed. I actually came back to watch this video to see if there was something I was missing. Any suggestions of a work around?
Thank you for this video. Direction Lock is what I needed. It appears the Insta360 records everything and the direction lock leaves it in a position (facing forward) I will be back to watch this video many times. Be carefull on your uni-wheel thing, I perfer my pickup truck and tractors. Thanks again!
When I export merged 360 files & export, & then upload to UA-cam, they are flat, not 360, what am I doing wrong, in media, export 360 option is available , in project, no export 360 option.
Great video. I love the "No Transition" button. Was it aways there? Just starting a project and the noticed my version 5.1.0, has four less pre-set option the Key Frame pop up menu than you're showing. Is this a setting or maybe a change going to 5.1?
Thanks! Yes the no transition has been there for a long while. Seriously underutilized. As for having fewer preset options idk I’ll ask insta360 if they can put it back.
Missing new buttons. If you are Mac user and the screen is full size, the project and media buttons may not appear. If so, the size controls are also cutoff. Use F3 and drag the studio screen to the desktop. The buttons will now be visible and active.
The Projects are limited to 30 fps only. I need to be able to combine separate 5.7K/60fps clips and maintain the quality 🙁 Is there no basic app that we can use to do this for the exported .mp4 files?
Using Studio 5.2 on Mac and only see 3 icons on right edge of screen vs your 6 (media processing, clip mgmt and file properties). Can’t see where Flowstate Stabilization is. Camera is GO 3S.
Hello. I have a question, if you want to help me??? In Insta Studio, in the Media panel you can edit each video separately and set the LOGO. But in the PROJECT panel, there are no options to set LOGO at Nadir???? Or am I doing something wrong? How to set a Nadir Logo in Project panel???
Hi there is no nadir logo in the project because nadir logo is only for 360 video. Project tab can do reframed video but not 360 video. I hope that helps.
Yep this is a problem.. they should have an option to export full 360 in studio too ! So be able to export a tracked shot but export it still as 360 .. so you can at any time pull it around then when you release it slowly goes back to the exported view ..
Why aren’t my images being saved to my iPhone album in 360 images format after I chose export as 360 from insta360 app? It’s just flat images doesn’t save with that 360 symbol and FB doesn’t support 360 images no more ?
Hi Alberto. When you export as 360 (not reframed) does it appear in your album as an equirectangular image (2:1 rectangle, looks distorted especially toward the top and bottom)? IPhone gallery doesn’t support 360 photos. Instead, try google photos. If you upload that same photo to google photos, you will see the 360 symbol. As for posting 360 to Facebook, see this article: 360rumors.com/facebook-360-photo-not-working-2021/?amp=1
wow) Mic this is awesome explain and tricks soooo cool to have for edit) as usual what can realy help) thanks ) huge work) and insta is soo nice in 360) for make more and have such in edition) how cool they add such things add to good to become perfect)
How do I sort my files in the project media tab once it's been imported? It appears randomly. And there is no option to sort by date or name or any other way. I have 116 files. I cannot even begin to edit my footage chronologically cos I'm trying to make a video about a trip to vietnam.
Hi good question. Right now I don't see a sorting option in Projects but I'll ask them to add it. Meanwhile, here's a workaround: in the Media tab, import everything, then use the sort button (upper left corner) to sort it. Then go back to Projects tab and in the Temporary media tab, the files should be there in sorted order.
@@lllcinematography thanks buddy! Re limited capability, here’s some context: I’ve been asking them to enable studio to combine videos for maybe 3 or 4 yrs. They only did it now which shows that desktop is not their priority. However I hope that now that studio has become more useful, more people will use it which will encourage them to put more development effort into it.
@@360vroomers catch 22 there. but based on their current choices, i think they won't prioritise desktop over phone app. i love their hardware, and i'd gladly pay for better software cos its driving me insane. I just sold off the x3 cos of this. dealing with the footage. and am sure many are too. there's so many on the used market. their ace pro is also i think the best action cam out there now, but at least with that editing won't be such a pain.
@@lllcinematography you sold your x3 bec of the software? Hmm I’m curious what did you get instead? Imho, their software is far ahead of gopro and everyone else that I know of.
Sorry no, project is only for non-360 reframed video. If you want 360 video you can export one video at a time and edit in Davinci resolve or premiere or other video editors.
The direction lock seems to be completely useless with X4 footage as it wanders all over the place requiring tons of keyframes. Coming from a gopro max and the reframing from gopro will follow the direction the camera points just like a single lens camera easily. Not sure what I'm missing but the camera is pretty useless if it can't follow where it's pointed.
Hi brookscurran. 4 tips for you: 1. If the selfie stick is perfectly horizontal, then the forward direction will flip 180 degrees every time the camera crosses the horizon. That’s why in the video I suggested turning off direction lock if you find the stabilization wonky. 2. Another option to avoid #1 is to hold the camera with the lenses facing left and right instead of sky and ground. If you do this, then crossing the horizon should not flip the forward direction in direction lock. 3. I frequently use deep track instead of direction lock to keep the camera focused on me. 4. Alternatively, you can use me mode to keep the camera always focused on you, no reframing needed. I hope this helps!
@@360vroomers thanks for the tips! I almost always just use it on a bite mount for regular pov. I really just want to reframe it like a single lens camera but get the FOV and stabilization that 360 mode offers. Looks like I’ll be going back to the trusty GoPro max again
@@brookscurran Like the camera is simply pointing downward and lens facing forward? If you use it Iike a POV cam like that, direction hold on x4 should be just as accurate.
What camera? Some cameras have modes that can’t change stitching etc. for example if I use Go 3S video mode (not freeframe mode), you can’t change stitching or stabilization.
@@kumanprzemek for 360 video export, the new insta360 studio does not offer anything new. If you want to edit and export 360 video, try Virb Edit (free) or powerdirector (cheaper than most editors).
@@360vroomers thank you, this gave me hope but I work on MacOS and it doesn't seem like powerdirector lets you edit 360 on the MacOS version. Would you know that for sure? And if so, any other suggestions for editing and exporting 360 video for Mac? I need to reorientate 360 clips then export them with new orientation as 360 videos, but can only do that as reframed videos in Insta360 studio, which is insane. I can't run Premiere on my computer and Resolve won't let me export more than 4k on free version. Any ideas??!!! It's driving me crazy! Thanks!
@@julesvlj1859 which version of powerdirector do you have? In this chart, under professional video editing, you can see all current versions of powerdirector support 360 video editing: www.cyberlink.com/products/powerdirector-video-editing-software/comparison_en_US.html
Interesting and useful, but very low level audio which made it hard to hear your commentary. Most of the really new stuff is in the Project tab which you covered rather quickly - I think it might be worth making a video just about that. Some users have been puzzled about how you edit keyframe transitions in the Project tab (completely different from before) and it's worth emphasising that audio can be imported from your own files - one UA-camr said that it can't be done in his review and now everyone thinks that's a problem! The biggest downside for me is that you can't crossfade audio (though you can fade it in and out as you showed) and you can't fade in the start of the video or fade out the end without using workarounds (for those who like that style).
Thanks Peter! I appreciate the detailed feedback. UA-cam’s algorithm is ruthless so I had to cut the video as short as possible. Since there’s a lot of overlap between project and media, i decided not to go over them again except keyframing which is a bit different, so i covered it again. I’ll ask insta360 to add audio transitions such as crossfade and to allow transitions at the beginning and end.
Timestamps:
00:00 Intro
00:42 Media tab vs Project tab
01:11 Importing files
01:25 Sort through your files with Favorites
02:06 Aspect ratio and taking snapshot
02:16 Flowstate Stabilization vs Direction Lock
03:26 If Direction Lock is resulting in shaky videos
03:46 Stitching options
04:31 Media processing (color plus, clarity plus, motion ND)
05:00 Clip management (create different versions)
05:25 Trimming your video
05:34 Adding effects (motion ND, timeshift)
06:17 DeepTrack for subject tracking
07:04 KEYFRAMING
08:38 Changing the transition type
09:22 AutoFrame (automatic keyframing)
10:23 How to use export queue
10:44 Project tab
10:59 Modifying project properties
11:35 Importing media to your Project
12:28 Adding media to timeline
12:54 Modifying videos in your Project
13:10 Keyframing in the Project tab
13:43 Adding music, titles and transitions
3:55 this little bit of the video ANSWERS what I’ve been asking for years with no definitive answer
I’ve been wondering about distortion compensation for using a dive case ABOVE water / or in my use case, used in particularly damaging situation such as under vehicle on gravel roads
Seeing that one setting option gives me confidence the image will look reasonable VS distorted for underwater only recording use of the case
Thanks buddy! Here’s a puzzle and tip: if you want to use your dive case both underwater and above water in the same video, how do you do it? The answer is to use clip management. First, use underwater stitching and keyframe everything. Then use clip management make a duplicate clip. Then for the duplicate clip, change the stitching mode to above water. So now you have two clips: one clip uses above water and the other clip uses the underwater stitching. Then you mix the two clips in your preferred editor or the project tab. 😀
@@360vroomers Nice to know. Otherwise I would have thought the entire thing would need to be one or other ( I guess it ism thus the required clip clone )
Mate, you have brilliant videos. Its a shame you don't have heaps more subscribers. All the best dude.
Thanks mate! I get what I get and I don’t get what I don’t get 😂
This is the best tutorial ive seen so far... thank you
@@sojournerstewart9678 thank you very much!
Thank you for the video.
I imported all X4 files (i had only shot a few short 4K and 5.7 videos) into the insta360 studio after installing it on my laptop. I had two issues:
1.When i played the videos, the video flow was inconsistent doing breaks all the time, so it could not run smoothly.
2. When i tried to export one ,it took 10minutes for the export progress to reach 5%
I am using a 5-year old windows 11 laptop which is not bad for today's standards. Not sure what the problem is to be honest. One thing is that i do not have more than 10G free storage on the laptop drive at the moment, but i do not think it has to do with it.
@@epos_rising hi Epos. You’re right to focus on your pc specs. Does your pc have dedicated graphics (gtx 750 equivalent or better)? A dedicated GPU (as opposed to integrated GPU) is much faster and more efficient when working with 360 photos and 360 videos.
If your PC has a dedicated GPU but it’s still slow, check the preferences under studio. Try checking both hardware decoder and hardware encoder. Also check the options for hardware acceleration. Finally, make sure your graphics card drivers are updated.
05:00 is there a way to batch export all of the different versions you've made? It seems like I have to export them one at a time, unless I'm missing something? Thank you :)
Has anyone figured out how to change the frame rate in the Project mode. Allowing it to match the clip rate you are adding? It seem to be greyed out at 30FPS
I’ll check with insta360 to find out when it will be changeable
Really good no nonsense explanation there, thanks!
. I’ve had studio and my X3 for about six months or so now. I’ve only played around with it a little bit but this past week been really getting into it and your video has helped me with a few bits I missed and didn’t realise I could do in studio. 👍
Thanks Steve! I'm glad you found it helpful!
For transitions between clips, you have to select the one you want and then drag it to the split location. Once in place, you can select it and edit the length. Took me some time to figure this out since its a little different than other editors. Thanks for the video!
Thanks for sharing the tip!
Two deal breakers for me. 1st one cannot combine 360 clips together in Projects. Reframed clips one can combine but not 360 clips. 2nd point is - In Media I can select Stats and configure the overlay in a 360 clip but when Exported the overlay is stripped from the video.
I’ll ask insta360 if they can add those features
Bro. Such a great video Been waiting for this. Please do more ! ❤
Thanks bro! Stay tuned!
Thank you, very informative and trying each of the features introduced in your video while watching, in short like in a classroom
I’m glad you found it helpful
Its almost like you took my "where are you" message personally and dropped a banger of a video the next day :P
Thanks Vineet! I was actually doing a lot of testing with insta360, giving suggestions on studio before its release. But they suddenly changed the schedule and released it super early 🤬 which didn’t give me enough time to finish the tutorial. So that’s why this tutorial wasn’t released until yesterday.
makes sense, thats why i messaged you because i saw the video from Yuqing and was thinking I am sure Mic has had to have early access to this :) eitherways great video :) @@360vroomers
Spectacular section on "Projects" Just what I was looking for. Thank you
Thanks for the great tutorial!
Somehow the project mode doesn't work well for me on an M2 Macbook Air. It slows to a crawl most of the time, and I usually get a beachball.
For now, I'll just continue what I've been doing in the past, exporting individual videos through the Insta Studio app, and then doing the actual editing on Lumafusion.
I really enjoyed and learned more from your 15 min beginners guide than all other videos combined. Do you have videos showing how to use split screen and also how to create a video that the viewer can explore the video while watching it? Thank you
Thanks Greg! (Nice bike! I used to have a ZX636 back in the day).
1. When you say split screen, do you mean Multiview? The Multiview effect is available only when editing on the phone. To use it, just view the video you want to use Multiview with, then on the bottom of the screen with editing effects like Trim, aspect ratio, etc. look for Multiview. Then click the + sign on the right to choose the point where the multiview starts and slide the bar to the end of the multivew and press the check mark. You can then select the different multiview effects, including Split Screen.
2. To create a video that the user can explore while watching, you need to export your video as a 360 video (not a reframed video). Then you need to post the 360 video somewhere that supports 360 videos, such as youtube or DeoVR.
@360vroomers thanks. I got the multi-view in the app. Can the "explore" video be created on studio and the app?
Thanks for the quick response.
@gdebell_757 the explorable video (360 video) can be exported either in studio or the app. But please note that in studio, you need to use the media tab (the project tab cannot export a 360 video).
Thank you. Very useful
Thanks! Glad you found it helpful!
Awesome tutorial bro!!
Thanks buddy!
*Great EUC 360 footage!*
⚡️🤙🏽🤟🏽🤙🏽⚡️
Great update to the desktop/laptop app 👌🏽
Thanks buddy! I used the 1-inch 360, x3, and hover x1 for the intro clip. 😁
An absolutley superb video, great revison for the media app capability, and the new project function overview is so well explained. TY so much!
Thank you very much warrior! I really appreciate it.
I will watch later but soo how glad to see new video)) keep going))) Thanks 🙏 it is huge update just all what wanted I still can't believe it happens because I soo wanted to have it... Have it 360 or just flat... Watch later and see)))
Thanks this is a big update and I hope they can continue to improve it. I think it will become a “real” video editor in 5 yrs. 🤔
I have had almost all of the insta360 cameras from the beginning.
The Studio software has come a long way and I am excited about that.
The only thing I scream at the sky about on an hourly basis is why oh why an action camera is produced today without GPS tracking built in camera.
Please don't tell me I can use my phone, gps remote by insta360, or a smart watch.
All action cameras, all action cameras including cheap junk ones on Amazon have it built in.
We use action cameras to do action not videos of grandparents walking in the park.
I fly and don't want or need any unnecessary extra crap to carry or have the potential to fail or loose conection or more batteries to worry about.
I need the telemetry data for overlays as do most action sports UA-cam creators do.
I used to use Sony x3000 cameras, Garmin, and a bunch of others, but I absolutely love the color science and everything else about the insta360 product line of cameras.
I currently have the X4 and the Ace Pro, and plan on picking up another X4.
I literally just sold 10 other action cameras of previous models and brands.
I hope the next generations of Insta360 cameras have GPS built in camera. 🙏
@@RonBesse I agree it is a weird decision by insta360, gopro and dji. But stay tuned for my next video 😉
I can't seem to find a way to edit speed of clip sections in the project tab, or even preserve speed adjustments. For instance, I made a clip in the Media tab and slowed a section down. Then, in the Project tab, I added that clip to the timeline, but it was full speed--the whole thing. It did not transfer that slow-down. I see a way to adjust the speed of a clip in the timeline of the Project tab, but it applies to the entire clip as opposed to just a small section of it as I had done in the Media tab edit.
I have exactly the same problem. Timelapse changes are not preserved when you add clips to a project. I suspect this is a bug.
Same issue here. Now on version 5.3.4 but still no way to adjust a part of the clip for speed. I actually came back to watch this video to see if there was something I was missing. Any suggestions of a work around?
Very helpful video thank you!
Thanks! I appreciate the feedback!
Thank you! I needed this video!!
Hey Chris! Glad it was helpful!
Thanks for this! Is there any way to add slow-mo effect?
Yes. Look for the icon that looks like a running person just below the viewing window. I hope this helps.
Great video, thank you!
Thanks Ryan!
Nice detailed review of studio. 👍👍👍, from Malaysia
Thank you! I’m glad it was helpful!
A wonderful and very helpful video, thank you!
Thank you for this video. Direction Lock is what I needed. It appears the Insta360 records everything and the direction lock leaves it in a position (facing forward) I will be back to watch this video many times. Be carefull on your uni-wheel thing, I perfer my pickup truck and tractors. Thanks again!
Thanks and I’m glad you found it helpful!
Great action camera. Just unboxed mine & immediately made a tutorial. Nothing on the market can touch it.
@@Sir-Kay congrats and thanks for making a tutorial!
Great tutorial, and thanks for sharing.
@@RonaldBrown59 thanks buddy!
When I export merged 360 files & export, & then upload to UA-cam, they are flat, not 360, what am I doing wrong, in media, export 360 option is available , in project, no export 360 option.
Great video. I love the "No Transition" button. Was it aways there? Just starting a project and the noticed my version 5.1.0, has four less pre-set option the Key Frame pop up menu than you're showing. Is this a setting or maybe a change going to 5.1?
Thanks! Yes the no transition has been there for a long while. Seriously underutilized. As for having fewer preset options idk I’ll ask insta360 if they can put it back.
Thank you. Best explanation Ive seen yet.
Thanks! I’m glad it was helpful!
Great. Thank you.
Missing new buttons. If you are Mac user and the screen is full size, the project and media buttons may not appear. If so, the size controls are also cutoff. Use F3 and drag the studio screen to the desktop. The buttons will now be visible and active.
Mic 🎉🎉🎉🎉 new video))) just happy)))
Thanks Aleks! Good to see you buddy
how do we add the logo as in media view onto a project?
What version of studio is that? I don't have so many options on keyframe popup
The Projects are limited to 30 fps only. I need to be able to combine separate 5.7K/60fps clips and maintain the quality 🙁 Is there no basic app that we can use to do this for the exported .mp4 files?
In that case I recommend Davinci resolve. The basic version is free
Using Studio 5.2 on Mac and only see 3 icons on right edge of screen vs your 6 (media processing, clip mgmt and file properties). Can’t see where Flowstate Stabilization is. Camera is GO 3S.
@@davidfreeman8863 hi David. It depends what mode you used to shoot. Try shooting in Free frame mode
Hello. I have a question, if you want to help me??? In Insta Studio, in the Media panel you can edit each video separately and set the LOGO. But in the PROJECT panel, there are no options to set LOGO at Nadir???? Or am I doing something wrong? How to set a Nadir Logo in Project panel???
Hi there is no nadir logo in the project because nadir logo is only for 360 video. Project tab can do reframed video but not 360 video. I hope that helps.
Yep this is a problem.. they should have an option to export full 360 in studio too !
So be able to export a tracked shot but export it still as 360 .. so you can at any time pull it around then when you release it slowly goes back to the exported view ..
Can u pls tell how to convert insta 360 video into standard flat video with zero distortion..thanks
Hi you just need to change the view to linear instead of ultra or mega
Why aren’t my images being saved to my iPhone album in 360 images format after I chose export as 360 from insta360 app? It’s just flat images doesn’t save with that 360 symbol and FB doesn’t support 360 images no more ?
Hi Alberto. When you export as 360 (not reframed) does it appear in your album as an equirectangular image (2:1 rectangle, looks distorted especially toward the top and bottom)? IPhone gallery doesn’t support 360 photos. Instead, try google photos. If you upload that same photo to google photos, you will see the 360 symbol. As for posting 360 to Facebook, see this article: 360rumors.com/facebook-360-photo-not-working-2021/?amp=1
wow) Mic this is awesome explain and tricks soooo cool to have for edit) as usual what can realy help) thanks ) huge work) and insta is soo nice in 360) for make more and have such in edition) how cool they add such things add to good to become perfect)
Thanks Aleks! Yes they did a good job. I hope it still be even better in the future!
How do I sort my files in the project media tab once it's been imported? It appears randomly. And there is no option to sort by date or name or any other way. I have 116 files. I cannot even begin to edit my footage chronologically cos I'm trying to make a video about a trip to vietnam.
Hi good question. Right now I don't see a sorting option in Projects but I'll ask them to add it. Meanwhile, here's a workaround: in the Media tab, import everything, then use the sort button (upper left corner) to sort it. Then go back to Projects tab and in the Temporary media tab, the files should be there in sorted order.
Thanks! Asked this on 4 other videos, no reply. One more sub for you! Can't believe how limited the desktop version is.
@@lllcinematography thanks buddy! Re limited capability, here’s some context: I’ve been asking them to enable studio to combine videos for maybe 3 or 4 yrs. They only did it now which shows that desktop is not their priority. However I hope that now that studio has become more useful, more people will use it which will encourage them to put more development effort into it.
@@360vroomers catch 22 there. but based on their current choices, i think they won't prioritise desktop over phone app. i love their hardware, and i'd gladly pay for better software cos its driving me insane. I just sold off the x3 cos of this. dealing with the footage. and am sure many are too. there's so many on the used market. their ace pro is also i think the best action cam out there now, but at least with that editing won't be such a pain.
@@lllcinematography you sold your x3 bec of the software? Hmm I’m curious what did you get instead? Imho, their software is far ahead of gopro and everyone else that I know of.
also can we export project to 360 video?
Sorry no, project is only for non-360 reframed video. If you want 360 video you can export one video at a time and edit in Davinci resolve or premiere or other video editors.
Is there any way to Change the Frame Rate in Project Mode of Insta360 Studio?
I always recording in 25p.
Not right now but I believe they will add in the future. Let me ask again
@@360vroomers Thanks... looking forward to hear their response.
@@360vroomers Finally version 5.2.2 able to change frame rate. Thank goodness.
The direction lock seems to be completely useless with X4 footage as it wanders all over the place requiring tons of keyframes. Coming from a gopro max and the reframing from gopro will follow the direction the camera points just like a single lens camera easily. Not sure what I'm missing but the camera is pretty useless if it can't follow where it's pointed.
Hi brookscurran. 4 tips for you:
1. If the selfie stick is perfectly horizontal, then the forward direction will flip 180 degrees every time the camera crosses the horizon. That’s why in the video I suggested turning off direction lock if you find the stabilization wonky.
2. Another option to avoid #1 is to hold the camera with the lenses facing left and right instead of sky and ground. If you do this, then crossing the horizon should not flip the forward direction in direction lock.
3. I frequently use deep track instead of direction lock to keep the camera focused on me.
4. Alternatively, you can use me mode to keep the camera always focused on you, no reframing needed.
I hope this helps!
@@360vroomers thanks for the tips! I almost always just use it on a bite mount for regular pov. I really just want to reframe it like a single lens camera but get the FOV and stabilization that 360 mode offers. Looks like I’ll be going back to the trusty GoPro max again
@@brookscurran Like the camera is simply pointing downward and lens facing forward? If you use it Iike a POV cam like that, direction hold on x4 should be just as accurate.
where is the fisheye on the new insta 360 Studio 5.0?
Hi you can use the crystal ball preset but zoom in for a narrower field of view.
thank you
Just updated to the latest version and get no options for stitch line or anything it's very basic all I can do is boost the colour but that's
What camera? Some cameras have modes that can’t change stitching etc. for example if I use Go 3S video mode (not freeframe mode), you can’t change stitching or stabilization.
@@360vroomersit's the insta360 x3
@@360vroomers it's the x3 so should have more options then just colour and sound noise
@flash301 did you use single lens video mode?
@@360vroomers in 360
Once under water and to take star laps plus others bur they was the main 2 I wanted to tweak
Unfortunately you can't add your own music selections.
Yes you can. Just import your music into the project media tab.
@@360vroomers oh just excellent))
When you open the 360 app there are no tabs
Hi. Is it any way to export project into 360 video? Or its imposible? Please help.
Hi right now you can only export 360 video in the media tab. The project tab does not support 360 video export yet.
Thank you for quick response
Big improve but its still kind of useless.
@@kumanprzemek for 360 video export, the new insta360 studio does not offer anything new. If you want to edit and export 360 video, try Virb Edit (free) or powerdirector (cheaper than most editors).
@@360vroomers thank you, this gave me hope but I work on MacOS and it doesn't seem like powerdirector lets you edit 360 on the MacOS version. Would you know that for sure? And if so, any other suggestions for editing and exporting 360 video for Mac? I need to reorientate 360 clips then export them with new orientation as 360 videos, but can only do that as reframed videos in Insta360 studio, which is insane. I can't run Premiere on my computer and Resolve won't let me export more than 4k on free version. Any ideas??!!! It's driving me crazy! Thanks!
@@julesvlj1859 which version of powerdirector do you have? In this chart, under professional video editing, you can see all current versions of powerdirector support 360 video editing: www.cyberlink.com/products/powerdirector-video-editing-software/comparison_en_US.html
Favorite part is that your riding an electric unicycle. This is what I’m trying to shoot as well with my x4
Nice! More euc footage in my x4 review:
ua-cam.com/video/K4GSfKt0Dik/v-deo.html
No cross dissolve or fade to black??? Some pretty basic stuff is missing.
I’m hoping insta360 will keep improving it as much as it has kept improving its other products.
usefull!
Thank you very much!
Interesting and useful, but very low level audio which made it hard to hear your commentary. Most of the really new stuff is in the Project tab which you covered rather quickly - I think it might be worth making a video just about that. Some users have been puzzled about how you edit keyframe transitions in the Project tab (completely different from before) and it's worth emphasising that audio can be imported from your own files - one UA-camr said that it can't be done in his review and now everyone thinks that's a problem! The biggest downside for me is that you can't crossfade audio (though you can fade it in and out as you showed) and you can't fade in the start of the video or fade out the end without using workarounds (for those who like that style).
Thanks Peter! I appreciate the detailed feedback. UA-cam’s algorithm is ruthless so I had to cut the video as short as possible. Since there’s a lot of overlap between project and media, i decided not to go over them again except keyframing which is a bit different, so i covered it again.
I’ll ask insta360 to add audio transitions such as crossfade and to allow transitions at the beginning and end.
I've been searching insta 360 studio multiview but failed
Informative, but you stopped before showing how to export for highest UA-cam quality. Thanks.
✨ "Promosm"
Fail to Unzip the transitions and text and everything else.. Why?