How To change Output Voltage of Laptop Chargers in Hindi

Поділитися
Вставка
  • Опубліковано 22 сер 2019
  • In this video i am going to show you how you can Change Output Voltage of Laptop Charger, you can convert 19 Volt to 5 volts, 12 volts, 25 volts and 24 volts, you can make whatever you want using a potential meter and if you wanted fix Voltage, set your desire Voltage by potential meter and measure resistance of potential meter, then remove potential meter and use fixed resistor.
    Friends Don't Forget to change the output capacitor when increasing Voltage, it is very compulsory, otherwise your charger will blast like a bomb.
    Like, share and subscribe my channel for more videos.
    #LaptopCharger #VoltageIncrease #LaptopChargerHack
  • Наука та технологія

КОМЕНТАРІ • 75

  • @greedykefir9560
    @greedykefir9560 3 роки тому +1

    Great info, works flawlessly. If you want any constant voltage like 12 volts, for example, replace that resistor with a 6.8k ohms one

  • @ggbce
    @ggbce 3 роки тому +1

    Thank you for your very useful video. I hacked a FSP040-DGAA1 (12VDC 3.33A) where it is very similar concept to modify the output at 9VDC for my specific purpose. Original resistor was 10 kohms, I modified with 14.9 kohms.

  • @engineerelectricsolution1060
    @engineerelectricsolution1060 3 роки тому +1

    Sorry mai ne pori vedio nahi deki ti esly samjh nahi, ap ke vedio se muje buaht asani se samjh aya ke kase constant voltage ham bana sakte hai

  • @kaunisiapa
    @kaunisiapa 2 роки тому

    Great tutorial, but u didn't zoom in for us to see which resistor to get rid off as there are two resistors..😁😁👍👍 tq

  • @ramazantosun51
    @ramazantosun51 8 місяців тому

    First of all, I would like to thank you for the enlightening and educational information. I have a 19 volt laptop charger, is it enough to replace the 3.9 kohm resistor with a 10 k potentiometer to adjust it?

  • @santoshtechnical3526
    @santoshtechnical3526 2 роки тому +1

    Thank you vai

  • @sharukhanklesaria2365
    @sharukhanklesaria2365 2 роки тому +1

    Superb!

  • @abidsaleem5070
    @abidsaleem5070 4 роки тому

    Sir Kya potantioal meter ko gomany see optocupler per jo secendry voltage kam ya zyada ho rahay ha ya nahi or optocupler par secendry section ma kitni voltage ati ha ya kitni voltage honi chaheya

  • @skarts4795
    @skarts4795 3 роки тому

    In Dell 90watt charger there is voltage variation from 5v to 19v.. don't know how it happens.. Pls guide me

  • @ranbirsiwach22
    @ranbirsiwach22 4 роки тому

    Sir Fix Volt के लिए Zenor Diode लगा सकते हैं क्या

  • @yys9801
    @yys9801 Рік тому

    Nice video Sir I need 42 volts/2amp how to get it.
    Thanks for sharing,

  • @jayantanath9
    @jayantanath9 4 роки тому

    Bhai dell ki cahrgwr mein Maine duo optocupler laga hai Kaya uska voltage Kaya control Kar sakte hai

  • @zafariqbaljanjuaiqbal6932
    @zafariqbaljanjuaiqbal6932 Рік тому

    Very good

  • @sam-mr9nz
    @sam-mr9nz 4 роки тому

    Can you give me a simple scheme for replace a resistor with potensiometer?

  • @scratch45
    @scratch45 4 роки тому +2

    Is it save bro and correct ?

  • @abhijitmandal1627
    @abhijitmandal1627 3 роки тому

    10x bro.....

  • @engineerelectricsolution1060
    @engineerelectricsolution1060 3 роки тому

    Buhat he achi vedio banai hai muje buhat help mela, aor kia asa hoskta hai ke 19v se direct 12v kardya jaye

    • @LittleBitTechInfo
      @LittleBitTechInfo  3 роки тому

      Fixed resistor laga do, variable resistor ko pahle lagao phir 12 volt set karo uske bad variable resistor ka resistance measure kar lo, utne hi ohms ka resistance laga do

  • @imdadullah7969
    @imdadullah7969 2 роки тому

    Thanks

  • @allcomm
    @allcomm 2 роки тому +1

    What about output amperage when output voltage is 25V ?
    Is this dangerous for adapter life (higher temperature) or simple output current will be lower ?

    • @LittleBitTechInfo
      @LittleBitTechInfo  2 роки тому +1

      Output current is lower, its all about wattage, if you have 20v 3A adaptor that means 60W, if you increase voltage Of same circuit like 30V, now it gives you 2A output

    • @rehanshayaan6872
      @rehanshayaan6872 11 місяців тому +1

      please reply. I wanted to know whether we get more amps while decreasing voltage???? Please reply. Thank you from heart ❤.

  • @ManjuDevi-xc5kr
    @ManjuDevi-xc5kr 2 роки тому +1

    12v charger ko 19 v kaise banayenge

  • @harmindersingh7833
    @harmindersingh7833 2 роки тому +1

    Sir voltage kam karne se amp Kya Hoga yah bataya Nahin Sir aapane bench power supply ke liye bahut Achcha hai

    • @LittleBitTechInfo
      @LittleBitTechInfo  2 роки тому +1

      Bhai ager koi adaptor 20 volt 3 amp ka iska matlab wo 60 watt ka adaptor hai, ab kisi spms m ye fix hota hai, ab voltage kam karo ya jyada maximum 60 watt tak hi milega

  • @kifayatullah3776
    @kifayatullah3776 4 роки тому +1

    Hey sir for 12 v, how much ohms resistance i needed

    • @ggbce
      @ggbce 3 роки тому +2

      Just try with a potentiemeter to test and adjust, then replace with a static resistor of this same value. For sure, if the initial resistor had a 10kohms (in exemple) for 20V, the new resistor should be with an higher value to limit feedback voltage.

  • @kamleshprajapati8341
    @kamleshprajapati8341 4 роки тому

    Sar power supply aur charger mein kya Fark Hota Hai please reply

  • @luckypatle2363
    @luckypatle2363 Рік тому

    Tl 431 bhi sath me lga huaa h tb regureter kyse kisse banaye

  • @nayanjagirdar8408
    @nayanjagirdar8408 3 роки тому +1

    सर आप जिसे ट्रांज़िस्टर कहते वो इंटेलीजेंट ज़िनर डायोड है !

  • @RahulYadav-yy8np
    @RahulYadav-yy8np 3 роки тому

    Mere laptop ke output section me voltage nahi aa raha h
    Aur koi bhi chij dammage ya burn nahi hua h
    Aap bataiye kya karu mai

  • @waymekar994
    @waymekar994 2 роки тому

    Out pot secshn me trashformar ke out pot kitna ata hee

  • @qasirwajdan8147
    @qasirwajdan8147 2 роки тому

    Bhaiii current control karne wale resistor ka pata kaise lage ga....kisi bhi chargers main....es par bhii aik video bana do bhaiii...plzzzzz..

  • @ilyasrao
    @ilyasrao 2 роки тому +1

    Agr 5k potential meter use karo to 1 dam se voltege change nai hoga

  • @mr.shadow3718
    @mr.shadow3718 2 роки тому

    Bro simply use ohm's law to find out resistor value what you want voltage at the output

    • @dunderdee
      @dunderdee 2 роки тому

      it's voltage divider

  • @bestactionmovieclip8493
    @bestactionmovieclip8493 4 роки тому

    Sir may I charge 12v lithium ion battery pack

    • @LittleBitTechInfo
      @LittleBitTechInfo  4 роки тому +1

      Yes, but set your voltage upto 14V

    • @bestactionmovieclip8493
      @bestactionmovieclip8493 4 роки тому

      I have a Mac book charger ,it's 16.5v 3.65ah,and show voltage 17.65v,and I have 10k vr and 50k,5k,100k potentiometer, which one I can use

  • @RahulYadav-yy8np
    @RahulYadav-yy8np 3 роки тому

    I need your help sir

  • @mdelectro
    @mdelectro 3 роки тому

    Sir plz reply Karo 😫
    Apne konsa wala Parts use kiya plz batao plz sir 😭😭

  • @thepioneereducation99
    @thepioneereducation99 3 роки тому

    What will be the amperes of output DC voltage?

  • @FaraazKhanOfficial
    @FaraazKhanOfficial 4 роки тому

    Bro potentiometer kitne ohms ka use kiya hai apna

  • @abdurraheem898
    @abdurraheem898 4 роки тому

    Ampere bhi kam zyada hoga...?

  • @mskhanx43
    @mskhanx43 Рік тому

    bhai ye charger repair krna btao poora dead hai

  • @jannovak3648
    @jannovak3648 3 роки тому

    Hi, What liquid to open a laptop charger?

  • @RDVHDMOVIE
    @RDVHDMOVIE 2 роки тому

    सर हमारे पास है मैं कुछ चलता नहीं बस उसमें करंट निकलता है उसको कैसे चेंज करें

  • @vansh34583
    @vansh34583 4 роки тому +1

    Can we change current somehow? My output is 20v but no current... What is the problem?

    • @jayakumarmj4291
      @jayakumarmj4291 3 роки тому +1

      I have also experienced same problem. Voltage reads 20 V dc. But current not stable. Fluctuating from 0 volt to 3 Amps

  • @parthivpatel5624
    @parthivpatel5624 4 роки тому +2

    how to increase amphere from 3.2 to 7.7

    • @ggbce
      @ggbce 3 роки тому +1

      It's basically impossible to just increase amperes. All parts in the concept will give a "power" (watts) result. Technically, if your power supply was 19V @ 4A (76 watts) and you want to reduce at 7.6V... you could get 10A (76 watts)... but not without warranty because some parts could overheat (not calculated to allow some current (A) in some parts)

  • @srikanthnani5001
    @srikanthnani5001 4 роки тому

    Is the output is dc or ac...?

  • @mdbadsha4171
    @mdbadsha4171 8 місяців тому

    Charging a 12 volt battery with a lowtop 19 volt charger shuts down the charger

    • @9zxthh1
      @9zxthh1 5 місяців тому

      Overcurrent protection. Its supposed to do that.

  • @RahulYadav-yy8np
    @RahulYadav-yy8np 3 роки тому

    Hi sir

  • @SandeepKumar-wd1ym
    @SandeepKumar-wd1ym 5 місяців тому

    Capacitor to nhi fatega

  • @sparkapnaorc6604
    @sparkapnaorc6604 2 роки тому

    Bhai bike ke battery charge kar sakte h

    • @LittleBitTechInfo
      @LittleBitTechInfo  2 роки тому

      Ha try kar sakte ho, voltage 13-14 volt rakhna bas

    • @sparkapnaorc6604
      @sparkapnaorc6604 2 роки тому

      @@LittleBitTechInfo bhai charger me blast hua😭

    • @LittleBitTechInfo
      @LittleBitTechInfo  2 роки тому

      19 volt pr laga diya tha kya?

    • @sparkapnaorc6604
      @sparkapnaorc6604 2 роки тому

      @@LittleBitTechInfo nahi bhai bike battery charge ki the to jo lm317 ic ka voltage regulator tha uski ic blast ho hyo

    • @LittleBitTechInfo
      @LittleBitTechInfo  2 роки тому

      Bhai 12 volt ki battery charge hone ke liye bahut current leti hai, lm 317 ki current rating kam hogi

  • @ravalsanjay1110
    @ravalsanjay1110 2 роки тому

    Muje redi pic chahiye milega

  • @super-dh9pj
    @super-dh9pj 2 роки тому

    Bhai jo banata hai uska number mil jaega kya please

  • @Wishme85
    @Wishme85 Рік тому

    I have an 18.5 v laptop charger. I have remove its two resistance connected to REFERENCE PIN of TL 431 and attached a 10k Potentiometer . Didn't change any capacitor. Now charger showing 21.5 volts. If u have any whatsapp number, so i can send you the pics of project. It'll be an honour for me if you'll help me.
    Thank dear.