I have several videos of shop-made drill presses in my build playlist, but this is by far the most elegant. Beautiful lines, and not one bit of unnecessary complexity. The video is a joy to watch, too. This is the one I'm going to make.
i just wish i had your talent and workshop i am 63 years old and only have a small shed to work in but waching your videos even inspires me at my age thank you so much and please take no notice of any bad comments there is a lot of envy out there great videos thank you
This is wonderful. I haven't seen a video where someone is so gentle with their crafts as a craftsman. I guess you don't have to be rough on everything you do these days. Just wonderful
this guy ist nuts! but in the best possible way. Brilliant ideas and great crafting. Most UA-cam instructions are 90% talking heads, THAT i find boring! Here it's only useful content, so detailed that everybody can follow. Respect for that!
I'm confused as to why so many people are saying congratulations?? This gentleman is a SKILLED craftsman. Skill is not something that needs to be congratulated, only admired and appreciated! As a 16 yr union journeyman carpenter, I just want to tell you that you do very clean work! Very professional!
There are many people who make similar tools, but I think that there are few who are making with accuracy. This video incorporates ideas on how to make accurate tools using simple measuring instruments. Google Translation 類似の道具を作っている方は多いですが、精度を考えて作っている方は少ないと思います。 この動画は、簡単な測定具を使って精度のよい道具を作る方法のアイディアを盛り込んでいます。
Nice video. I noted something about depth issue - look on your vid, while drilling small chip felt on top of depth stop just between that stop and drill mounting plate
Excellent build with a high degree of precision. You set the depth to 10mm, but on checking you found it to be 9.14mm. Since the build is highly accurate, the depth must have been very close to 10mm. The real reason for the inaccuracy is this: Watch closely at 23:09. As the hole is being drilled, a small piece of wood shaving lands near the zero mark of the scale. The drill is lowered to drill the hole, but the wood piece prevents the drill from reaching the full depth of 10mm. Check it once again making sure that nothing obstructs the full movement of the drill; you should get much better results.
@@carlosvargas2907 Yes you are correct my friend. To set the depth of 10mm the tip must be forced into the wood so that the actual bit is set to surface of the wood. not above. He is also explain this in the video. if you set the tip on the surface you need to set the depth at 11 and not 10.
I watch many wood working videos and yours are by far the most outstanding. Your style, technique, tools, ideas, creativity and craftsmanship are surpassed by none.
It's just so mesmerizing watching this master craftsman at work. I'd love to imagine myself making something that resembles this one but it will not! I'll try and make it anyways now that we're all in some kind of lockdown due to Covid-19 so what I have is time! Thanks for the inspiration Sensei
I've always wanting to have a drill press since every time I drill something is actually not straight. With the help of your design, Now I can surely build my own. Very thankful to you Mr. Jisaku-kobo San. Arigato Gozaimasu.
Mr.RCrazeE . First you must be understand about centrey figure from the bottom horizontal to pole vertical you put sprit level.are metnac . Mean Big L queit position . Then must not come hole taper or cross. Thanks to you.
Awesome; Thank you! @6:20 assuming the materials are straight, clean and smooth, i would put a sheet of paper in between before temporarily position them. Should be enough to prevent friction.
Very nice build and your care and craftsmanship were a pleasure to witness, I would say though that unless the drill press is reinforced somehow and braced, it will soon become loose and be incapable of delivering perfectly vertical drill holes as the screws and glue which hold it in position to the base are simply incapable of bearing the inevitable strain to which they will be put. Thank you for showing this to us, I really enjoyed watching you work.
The drill press looks quite solid. He has routed out a perfect size hole for the drill to sit in and it is being supported tightly on the top with two clamps. The holder is supported by wood screws and it is a double thickness of plywood. I don't remember th last time I saw wood screws loosen up. Plywood does not crack or warp easily and is quite strong. The press should last quite a while and continue to drill nicely if not abused.
Hola les saludo desde la Ciudad de México y quiero decirle que desde que encontré este vídeo, me enamoré del trabajo tan PERFECTO y la PACIENCIA para compartir cada detalle. Ya hoy mismo voy por mi material para trabajar el mío. Lo FELICITO ENORMEMENTE por su EXPERIENCIA y por compartirla por este medio. Ya tengo varios vídeos suyos que pondré en práctica pues me fascina la madera. Reciba un cordial abrazo con el respeto que me merece. DIOS lo siga BENDICIENDO....Bye
Hola, que sorpresa encontrar alguien que escribió en español para este video, porque tengo una pregunta. ¿Me puedes ayudar? El material tipo goma que colocó casi al final del video para poner el tope, ¿qué será? ¿Plastilina, masilla?
@@gerardosanchez2767 amigo eso es masilla epoxica ya que si notas tiene 2 colores y al comenzar a masillar se mezclan esos 2 componentes y es cuando comienza a endurecer la mezcla, y es cuando la echa para que sirva de tope para el taladro saludos!!!
Станок под электродрель, тем более с линейкой получился очень хороший. Но надо его доработать ( добавить) сделать ручку с пружинной. Чтобы пружина при отпускание дрели всё таки тянула вверх. Просто очень не удобно каждый раз держать дрель, чтобы резко не упал сверлом в доску при сверление. Я ЖЕЛАЮ ТЕБЕ УДАЧИ В ТВОИХ ТВОРЧЕСКИХ ДЕЛАХ.
@@AndreyK0s отличные замечания! Ведь реально, там стружка; думаю, можно прицепить нечто типа кожуха в место стыка-упора (широкий стикер) И да, пружины с рычагом не хватает категорически.
Hola Jisaku-kobo. Te escribo desde Perú. Veo tus videos y te felicito. Eres extraordinario y muy didáctico. Esta herramienta la haré este fin de semana. Gracias por compartir tus conocimientos!!
Hola Ramiro. Disculpa que recién te conteste. Estuve fuera de mi ciudad todo este tiempo así que hoy regresé a mi taller. Por cierto, es mi pasatiempo y no me dedico a la carpintería. La experiencia con el trabajo fue genial me las tuve que ingeniar para hacer los cálculos del tamaño de las piezas. La corredera que usé fueron unas telescópicas porque no encontré las mismas que se ve en el vídeo. No es que quiera presumir, pero me salió bastante bien en especial la perpendicularidad. Un abrazo, Ernesto
agreed, but that's why you can mute the sound; I love it a lot without chattering talk. And really nice furniture-grade ply; not sure where I'd buy that in the UK.
I've been looking for a simple design for a drill press for a while now and this one is the most ingenious! The DIY press with depth limitation and perfect aligning! And it's not super-complex as well, totally doable! That's the sign of great engineering and design - simple yet beutifully efficient. Thank you so much, this will be my next build! Also I've found a couple of beutiful tips for any DIY build here, like correcting that 90 degree angle by simply glueing a small paper tape to one side of the bar instead of endlessly trying to grind it to a flat level and many more. You really made my day, subscription is inevitable :)
Great job, it's amazing to see how precise and artful it is, well done. I wonder if I wanna try to make one drill stand like this, can you share with us the measurements plz? Thank you
Здравствуйте уважаемый мастер. Вы достойны внимания, понимания и уважения. Труд Ваш интересен и желаем. Достойно и во времени показаны процессы создания станка для дрели. Интересна форма мысли и стоит подражания. Некоторые детали исполнения желательно пересмотреть. На ответственных деталях, а ответственны все ! - надо для надежности создавать запилы. Приклеить клеем фанеру торцами - хорошо - но во времени использования образуется "усталость" клеевая и свойство клея по дереву - при повышении влаги и вибрации - разрушаться. Работая до С.А. на заводе Судостроительном , в Крымской области, часто работал в цеху плотницком - работа краснодеревщиков. Многому учился. При наличии запилов - Вы получите идеальное сочетание прочности деревянной конструкции. Вы создали великолепное . Этот станок желанный многим людям для дома. Скользящие части по вертикали - как дополнение - желательно устанавливать на металлические уголки и со смазкой. Желаем вынос по двум осям - или - уточняю - опускание дрели вниз и выход ее по горизонтали. Для работы с деревом - еще в школе Советской и на уроках - Труда - были тиски по дереву. Мы много делали работ по дереву и этим гордились , т.к.делали для школы и для дома.
Estou falando do Brasil, Ribeirão Preto Estado de São Paulo ,Você está de parabéns, o suporte mais perfeito que eu vi até hoje, estou admirado, eu gostaria mais se estivesse traduzido para português Por que não entende uma palavra .😱 parabéns..👏👏👏👏👏👏👏
Your precision is amazing. No such thing as "good enough." I doubt I can match your skills but I want to make one as a mount for an impact drill to use with my mortising bits.
Me encantó las ideas, precisión, versatilidad y funcionalidad, pero hace falta que tenga más capacidad de espacio para la distancia del sitio a taladrar, nada más, el resto está fabuloso. Gracias y felicitaciones. Un saludo cordial desde Quito Ecuador.
Wow I watch like 20 videos of how to do this but this one's at a completely different level, Satisfying Accuracy Level haha, i need to try it, thanks for the great explanation, greetings from Mexico
Very ingenious and precise !! Congratulations!! I would like to have the project and the measures of the materials used on this design for this beautiful job .... Thanks!
very nice. the only problem that I see is that your very limited on how far that you can bring your wood over against the arm that holds the drill. it would be better if your extended the arm out more so that you can have more room to drill farther away from the arm but other then that it's really ingenious. great work.
Great, that is the answer. It can be done with tools you have at home. Very often in these videos you need all sorts of fancy tools and machines. Well done 😊
Dear JSK,Labo I see and really like your work in doing very carefully all of his work and I'm just a youtuber, you only have a desire. greetings Suwarso Bogor west java
Excellent design and execution. Needs a handle mechanism to move the drill up and down. And please don't make the video so long by dwelling on the drilling of holes and screwing of screws. It could be half the length and still show us what you've done. But a really rigid and smooth action. Bravo.
Are you a surgeon in your spare time, everything was done to such precision. If it wasn't for all the gauge marks on the workbench,it would be hard to believe this is a workshop. Nice bench drill by the way.. .
Master craftsman. No doubt that I will buy a few plans. It is a challenge trying to source some of the pre made parts - like the simple elegant draw slides in this tool.
If you find any unauthorized reproduction of the JSK-koubou video, please report it to me.
Thank you.
JSK-koubouビデオの無断複製を見つけた場合は、報告していただけると助かります。
Kkķk
🔥👍👍
P
. P. La
0
Japanese precision...something the rest of us in the World would love to achieve...you are a master artisan...🏆
At last we have a simplified video with NO talking distraction. You "watch and learn"...BRAVO JSK!!!
Po ovom ručnom radu sebi ću napraviti ovakav stalak.Profesionalno je gospođa ovaj predmet odradila.Hvala za ovaj prilog.
I have several videos of shop-made drill presses in my build playlist, but this is by far the most elegant. Beautiful lines, and not one bit of unnecessary complexity. The video is a joy to watch, too. This is the one I'm going to make.
i just wish i had your talent and workshop i am 63 years old and only have a small shed to work in but waching your videos even inspires me at my age thank you so much and please take no notice of any bad comments there is a lot of envy out there great videos thank you
Without youtube I'd never know there were individuals who were this exceptional!
I love how you use easily accessible tools to build amazing equipment, you make woodworking look so manageable thank you
I made a plan（設計図を作りました）
jisaku-koubou.com/downloads/simple_drill_press
Thank you! I am making one this week. The plans will be a big help!
設計図（図面）は英語で drawing と言います。
planという言葉は日本語の”計画概要”に近い感じでしょうか
Second day i discover your chanal and can't switch off. Thanks for fantastic works
@@swalloy
me too!
Stunning work.
You’re killing me! Every time I watch one of your AWESOME videos, you use other tools that you’ve made. I can’t keep up! Thanks, again. Darn it.
This is wonderful. I haven't seen a video where someone is so gentle with their crafts as a craftsman. I guess you don't have to be rough on everything you do these days. Just wonderful
this guy ist nuts! but in the best possible way. Brilliant ideas and great crafting. Most UA-cam instructions are 90% talking heads, THAT i find boring! Here it's only useful content, so detailed that everybody can follow. Respect for that!
"Simple awsome, Accurate, Smooth, Clean, Elegant and perfect. Just became a fan." I'm amazened with your technique and videos.
The best idea I got from this video was the circular saw guide. Brilliant!
I dozed off many times watching this video!!!
Points for cleanliness and precision!!!
Thanks for sharing!!
I'm confused as to why so many people are saying congratulations?? This gentleman is a SKILLED craftsman. Skill is not something that needs to be congratulated, only admired and appreciated! As a 16 yr union journeyman carpenter, I just want to tell you that you do very clean work! Very professional!
And congratulating someone is not a way to show appreciation, smart ass?
Is not just craft man but he is also a best instructor
There are many people who make similar tools, but I think that there are few who are making with accuracy.
This video incorporates ideas on how to make accurate tools using simple measuring instruments.
Google Translation
類似の道具を作っている方は多いですが、精度を考えて作っている方は少ないと思います。
この動画は、簡単な測定具を使って精度のよい道具を作る方法のアイディアを盛り込んでいます。
Nice video. I noted something about depth issue - look on your vid, while drilling small chip felt on top of depth stop just between that stop and drill mounting plate
@@arerosl
lol
23:10 ?
@@jisakukobo yes %)
I need the dimensions of this tool. Thanks.
Please give me the dimension i'll make one..youre a genius.superb
Well done, my friend. Easy to follow instructions, and clean, clear video. Thank you.
Excellent build with a high degree of precision.
You set the depth to 10mm, but on checking you found it to be 9.14mm. Since the build is highly accurate, the depth must have been very close to 10mm. The real reason for the inaccuracy is this:
Watch closely at 23:09. As the hole is being drilled, a small piece of wood shaving lands near the zero mark of the scale. The drill is lowered to drill the hole, but the wood piece prevents the drill from reaching the full depth of 10mm.
Check it once again making sure that nothing obstructs the full movement of the drill; you should get much better results.
I think the hole is not 10mm because the tip of the drill, but i am not sure.
Muy observador!
@@carlosvargas2907 Yes you are correct my friend. To set the depth of 10mm the tip must be forced into the wood so that the actual bit is set to surface of the wood. not above. He is also explain this in the video. if you set the tip on the surface you need to set the depth at 11 and not 10.
There is only one word to describe this video. Not like many others. ACCURACY..I mean is what I look for.
I watch many wood working videos and yours are by far the most outstanding. Your style, technique, tools, ideas, creativity and craftsmanship are surpassed by none.
There are lots of DIY drill presses, but your is the most beautiful and elegant of them all.
Thanks a lot.
Simple, Accurate, Smooth, Clean, Elegant and perfect. Just became a fan.
the most amazing woodworker i've ever seen ...you sir are impressive
It's just so mesmerizing watching this master craftsman at work. I'd love to imagine myself making something that resembles this one but it will not! I'll try and make it anyways now that we're all in some kind of lockdown due to Covid-19 so what I have is time! Thanks for the inspiration Sensei
парнишка молодец,следить за его работой одно удовольствие,думаю он один из лучших самоделкиных на ютьюбе а может и лучший .
Very systematic even there's no audio explanation. Well done and it's self explanatory. No further comment your honor. Action speaks by itself.
Ай 🫣 23:08 стружечка попала, миллиметрик не догнал, ну а так-то респект!
😉👍
I've looking to buy a press drill but I will make one after watching this. I know it won't be as beautiful! Great video.
MrMackanno me too
@@singwolf. I made my own to day
A labor of love. Liking adjustable depth also mounting of drill. Thanks for the plans.
I've always wanting to have a drill press since every time I drill something is actually not straight. With the help of your design, Now I can surely build my own. Very thankful to you Mr. Jisaku-kobo San. Arigato Gozaimasu.
You can buy one for around $70. the parts for this would prob be more
Mr.RCrazeE . First you must be understand about centrey figure from the bottom horizontal to pole vertical you put sprit level.are metnac . Mean Big L queit position . Then must not come hole taper or cross. Thanks to you.
@@bhitraumayya8743 Huh? What are you trying to say???
I bought a drill press years ago but I still watched your video all the way through. Love the way you work. I could watch it all day!
This is the best one I see on UA-cam.
You are a genius. Not energy waste flawlessly
Awesome; Thank you!
@6:20 assuming the materials are straight, clean and smooth, i would put a sheet of paper in between before temporarily position them. Should be enough to prevent friction.
at this rate, JSK-koubou will teach us how to build a handmake space elevator! great job!
Excellent video, extremely didactic, meticulous and accuracy. Congratulations!
perfecto lo que hace usted maestro un gran abrazó de la república Argentina 👏👏👏👏👏👏
Great work, particularly your cleanliness and perfection, and thank you for sharing it with the world!
I see a lot of videos for to make a drill press like this, but this is the best. Cingratulations from Spain
This is another VERY NICE job ! I like its precision. its accuracy. its simplicity end its elegance...well done !
Remarkable! Thank you very much for another fabulous video project! Nothing short of amazing. Cheers. Pete in Montana. 🤠
Hi, and thank you for sharing your skills and innovation with us. Your attention to detail is truly inspiring.
I like your all informative video only i could have those amazing tools. Will be watching all of them. More power
You Sir are a real perfectionist! Great craftmanship!
The note with the epoxy paste is awesome. Now I know how to help myself in quite a few cases. Thank you!
Very nice build and your care and craftsmanship were a pleasure to witness, I would say though that unless the drill press is reinforced somehow and braced, it will soon become loose and be incapable of delivering perfectly vertical drill holes as the screws and glue which hold it in position to the base are simply incapable of bearing the inevitable strain to which they will be put.
Thank you for showing this to us, I really enjoyed watching you work.
The drill press looks quite solid. He has routed out a perfect size hole for the drill to sit in and it is being supported tightly on the top with two clamps. The holder is supported by wood screws and it is a double thickness of plywood. I don't remember th last time I saw wood screws loosen up. Plywood does not crack or warp easily and is quite strong. The press should last quite a while and continue to drill nicely if not abused.
Hola les saludo desde la Ciudad de México y quiero decirle que desde que encontré este vídeo, me enamoré del trabajo tan PERFECTO y la PACIENCIA para compartir cada detalle. Ya hoy mismo voy por mi material para trabajar el mío. Lo FELICITO ENORMEMENTE por su EXPERIENCIA y por compartirla por este medio. Ya tengo varios vídeos suyos que pondré en práctica pues me fascina la madera. Reciba un cordial abrazo con el respeto que me merece. DIOS lo siga BENDICIENDO....Bye
Awesome and incredible..accuracy.. Precision.. patience.. super craftsmanship👍👍👍👍
what paste you use for fixing the machine ... ??? ... thank you
I liked it and learnt a lot. Thank you for sharing it to the world.
La mejor satisfacción es hacer nuestras propias herramientas gracias por el video saludos!!!
Hola, que sorpresa encontrar alguien que escribió en español para este video, porque tengo una pregunta. ¿Me puedes ayudar? El material tipo goma que colocó casi al final del video para poner el tope, ¿qué será? ¿Plastilina, masilla?
@@gerardosanchez2767 amigo eso es masilla epoxica ya que si notas tiene 2 colores y al comenzar a masillar se mezclan esos 2 componentes y es cuando comienza a endurecer la mezcla, y es cuando la echa para que sirva de tope para el taladro saludos!!!
One of the best videos on UA-cam
Станок под электродрель, тем более с линейкой получился очень хороший. Но надо его доработать ( добавить) сделать ручку с пружинной. Чтобы пружина при отпускание дрели всё таки тянула вверх. Просто очень не удобно каждый раз держать дрель, чтобы резко не упал сверлом в доску при сверление.
Я ЖЕЛАЮ ТЕБЕ УДАЧИ В ТВОИХ ТВОРЧЕСКИХ ДЕЛАХ.
Да и следить, чтобы под ограничитель стружка не попала. На последних секундах видео 0,86мм она и съела
@@AndreyK0s отличные замечания! Ведь реально, там стружка; думаю, можно прицепить нечто типа кожуха в место стыка-упора (широкий стикер)
И да, пружины с рычагом не хватает категорически.
Да и расстояние от центра до стойки маловато, всего 4-5 см.
Awesome! Your homemade drill press and work. 👍👍👌👌
I will upload my homemade drill press on Sunday if I finish
Hola Jisaku-kobo. Te escribo desde Perú. Veo tus videos y te felicito. Eres extraordinario y muy didáctico. Esta herramienta la haré este fin de semana. Gracias por compartir tus conocimientos!!
estimado amigo...soy de Guayaquil, Ecuador...deseo que me cuentes tu experiencia si es que ya hiciste la herramienta... Gracias
Hola Ramiro. Disculpa que recién te conteste. Estuve fuera de mi ciudad todo este tiempo así que hoy regresé a mi taller. Por cierto, es mi pasatiempo y no me dedico a la carpintería. La experiencia con el trabajo fue genial me las tuve que ingeniar para hacer los cálculos del tamaño de las piezas. La corredera que usé fueron unas telescópicas porque no encontré las mismas que se ve en el vídeo. No es que quiera presumir, pero me salió bastante bien en especial la perpendicularidad.
Un abrazo,
Ernesto
Ernesto Martínez Espinoza hola Ernesto soy carlos desde España donde tienes las medidas puedes estás tutoría de esta herramienta gracias
I like it better with no music, but then again, your work is awesome, keep it up.
agreed, but that's why you can mute the sound; I love it a lot without chattering talk. And really nice furniture-grade ply; not sure where I'd buy that in the UK.
Be my friend in real life. I would like to drink tea and watch your work and then we can talk about your masterpieces :) subbed
I've been looking for a simple design for a drill press for a while now and this one is the most ingenious! The DIY press with depth limitation and perfect aligning! And it's not super-complex as well, totally doable! That's the sign of great engineering and design - simple yet beutifully efficient. Thank you so much, this will be my next build!
Also I've found a couple of beutiful tips for any DIY build here, like correcting that 90 degree angle by simply glueing a small paper tape to one side of the bar instead of endlessly trying to grind it to a flat level and many more.
You really made my day, subscription is inevitable :)
Great job, it's amazing to see how precise and artful it is, well done.
I wonder if I wanna try to make one drill stand like this, can you share with us the measurements plz?
Thank you
Здравствуйте уважаемый мастер.
Вы достойны внимания, понимания и уважения.
Труд Ваш интересен и желаем.
Достойно и во времени показаны процессы создания станка для дрели.
Интересна форма мысли и стоит подражания.
Некоторые детали исполнения желательно пересмотреть.
На ответственных деталях, а ответственны все ! - надо для надежности создавать запилы.
Приклеить клеем фанеру торцами - хорошо - но во времени использования образуется "усталость" клеевая и свойство клея по дереву - при повышении влаги и вибрации
- разрушаться.
Работая до С.А. на заводе Судостроительном , в Крымской области, часто работал в цеху плотницком - работа краснодеревщиков.
Многому учился.
При наличии запилов - Вы получите идеальное сочетание прочности деревянной конструкции.
Вы создали великолепное .
Этот станок желанный многим людям для дома.
Скользящие части по вертикали
- как дополнение - желательно устанавливать на металлические уголки и со смазкой.
Желаем вынос по двум осям
- или - уточняю - опускание дрели вниз и выход ее по горизонтали.
Для работы с деревом - еще в школе Советской и на уроках
- Труда - были тиски по дереву.
Мы много делали работ по дереву и этим гордились , т.к.делали для школы и для дома.
Estou falando do Brasil, Ribeirão Preto Estado de São Paulo ,Você está de parabéns, o suporte mais perfeito que eu vi até hoje, estou admirado, eu gostaria mais se estivesse traduzido para português Por que não entende uma palavra .😱 parabéns..👏👏👏👏👏👏👏
You are a very neat craftsman with patience
Nice video Kobo San. Very inspjring. Thank you
自作工房 （じさくこうぼう）means 'DIY workshop'... so "kobo" is workshop, or studio. 🙂
既製品にはない暖かさと美しさ、そして丁寧な作業と精度。見入ってしまいますね。
Your precision is amazing. No such thing as "good enough." I doubt I can match your skills but I want to make one as a mount for an impact drill to use with my mortising bits.
Jsk , koubou . Really appreciate your creativity put in to slideing movement . to up down purpus to drilling . thanks to you. Okey.
Wow ! Sensacional, vou construir a minha também. Muito obrigado.
Work is the highest manifestation of art.
Me encantó las ideas, precisión, versatilidad y funcionalidad, pero hace falta que tenga más capacidad de espacio para la distancia del sitio a taladrar, nada más, el resto está fabuloso. Gracias y felicitaciones. Un saludo cordial desde Quito Ecuador.
Donde se podrá coger las medidas?? Gracias.
Wow I watch like 20 videos of how to do this but this one's at a completely different level, Satisfying Accuracy Level haha, i need to try it, thanks for the great explanation, greetings from Mexico
Very good! There are times when I could definitely use one of these! Thank you.
ガラス板を基準面にするの良さそうですね。早速硝子板を買ってきて真似してみます。
ドリル取り付けについてエポキシパテでうまく位置決めできるようにしているところ、
取り付けやすさと精度のバランスが取れていて素晴らしいです。
Very ingenious and precise !! Congratulations!! I would like to have the project and the measures of the materials used on this design for this beautiful job .... Thanks!
Me also!
They are on his site, they aren't expensive. Like £5 for a plan
@@joshuaisaacs8970 Thank you
小さいボール盤を持っているのですがすぐにズレてしまうし、高速回転すぎて太い穴あけが大変でした。
自作しようと思い、UA-camでイロイロこういったドリルガイドの動画を見ましたが、これほど精度が高くキレイで作り方の説明も丁寧なものは他にありませんでした。
いやー、さすがです。実は最初は菱目打ち機をマネさせてもらい、丸ノコ定規も、、、今回は少し難易度高いですが頑張ってマネさせていただきます。
色々参考になっているようで良かったです。
今回は確かに難易度が高めです。でも、丁寧に作ればなんとかなるレベルだと思います。頑張ってください。
very nice. the only problem that I see is that your very limited on how far that you can bring your wood over against the arm that holds the drill. it would be better if your extended the arm out more so that you can have more room to drill farther away from the arm but other then that it's really ingenious. great work.
Aaaa the quality of that plywood!! Awesome work and video, thank you from Buenos Aires!
あなたの作るものはすごいと思う。
Great, that is the answer. It can be done with tools you have at home. Very often in these videos you need all sorts of fancy tools and machines. Well done 😊
i like this video so satisfying
Wow another great build. I have a drill press but this video makes me want to build one LOL.
Um projeto muito interessante, parabéns ao projetista, gostei demais schow de bola
Dear JSK,Labo
I see and really like your work in doing very carefully all of his work and I'm just a youtuber, you only have a desire. greetings Suwarso Bogor west java
The idea is interesting.
I admire the accuracy, elegance, attention to detail and functionality. Bravo!!
Fenomenal! Fantástico! Magnífico!
awesome... high precision and inspiring.. greetings from Indonesia
Muito Obrigado! Por seus projetos!!
Excellent presetation and slow work. It is easy to undersatnd too. Thank you for sharing.
Is the epoxy paste the "wood repair" type? Could you provide more product info?
Great job sir, nice video very clear the steps easy to follow
Excellent design and execution. Needs a handle mechanism to move the drill up and down. And please don't make the video so long by dwelling on the drilling of holes and screwing of screws. It could be half the length and still show us what you've done. But a really rigid and smooth action. Bravo.
James Keyes thumbs up 👍🏽
Ide" brilian yg patut d beri 👍👍👍👍 luar biasa menginpirasi
Kindly give me PDF details of this project
I worked out all the cut measurements from a standard draw slide he uses (~450mm)
Are you a surgeon in your spare time, everything was done to such precision. If it wasn't for all the gauge marks on the workbench,it would be hard to believe this is a workshop. Nice bench drill by the way.. .
I thought a lot of plans for hand drills to a press drill until I see this video, I feel shame on myself.
The cleanness of the worker and work space are admirable.
The marvelous product is a logical consequence.
Congratulations
Made in Japan 🗾
Smells like Fukushima.
The Japanese take the time to master their craft. Kaizen!
Absolutely no room for errors on this guy! Hats off to you sir. You are amazing!
Master craftsman. No doubt that I will buy a few plans. It is a challenge trying to source some of the pre made parts - like the simple elegant draw slides in this tool.