Fix broken Side view Mirror Hub/Neck Chevy Tahoe, A
Вставка
- Опубліковано 29 бер 2017
- Fix Broken/ Loose Side view Mirror Hub/ neck Chevy Tahoe, Avalanche, GMC Yukon, Silverado, Suburban, Escalade, Sierra
To Support Flashback502:
PayPal: www.paypal.me/Flashback502
Fan Mail, Products & Donations:
Flashback502
PO Box 20201
Louisville, KY 40250 - Навчання та стиль
If this video helped you please subscribe and help support our channel. Thank you
Flashback502 will this also work on a Dodge Ram side mirror my Hub is sprung and I was wondering if it would be basically the same way appreciate a response have a great day thanks for the video
Your step by step, pause frames and everywere on point! The small details are where its at. Thanks man!
Glad it helped!
hey bro, great video. in the process i discovered a shortcut for the tough part. take a 30mm socket, place it over the steel ring, wack it really good with a rubber mallet and it seats right into place.
Thanks for tip, Yea getting spring down was the hardest part. Please subscribe & like and share if haven't already and check out our other helpful videos
Great video. I would just like to add that if you drill a couple holes into that cast aluminum piece, you could put a roll pin or a long nail through it to keep that lock washer from ever sliding off again.
Thanks for helpful tips. Glad could help👍Please subscribe & like and share if haven't already and check out our other helpful videos
Flashback502 - Thank you for showing the process for this. My passenger side mirror did this. I have an idea for getting that clip back on. Use a OS/2 socket so you can go right over it and then put an extension on it and force it down. I have to check out the size of the socket compared to the clip size. Hopefully they are similar enough :)
Your welcome thanks for helpful tip
Hey man awesome video. I was able to help my dad fix the drivers side mirror on our Yukon. It was wobbly, and I followed the instructions in your video to successfully fix fix the mirror. We thought we had to buy a new one.
Luis Arroyo thanks for watching glad was able to help with mirror. Please Subscribe and share if haven't already and check out my other helpful videos. Thanks for your support.
Thanks for the lesson, I was thinking we need a new mirror but I bet you just taught us how to fix it. Much appreciated!
DrScientistSounds thanks for watching glad was able to help with mirror please subscribe and share if haven't already and check out my other helpful videos.
I used this video to fix my wife's mirror, works great now....thank you
Thanks for watching and commenting glad was able to mirror. Please Subscribe and share if haven't already and check out my other helpful videos.
Thank you for the detailed instructions. I had this very thing happen with my passenger side mirror. My brother in law and I took it off and decided there wasn't any way to get in there and look at it let alone fix it. We were simply going to go to take time and spend some money at the junkyard for a replacement. At the last minute I decided to type "fix a tahoe side mirror" into UA-cam, since UA-cam has been a great resource in the past. Lo and behold, there was your video. We followed your instructions and the mirror is fixed / back on the truck. It definitely is no picnic pressing that cap on while having to compress the spring. But we did it with a pair of channel locks and a pair of pliers and a hammer. You saved me money and time. Thanks again!
mbtjr Thanks for watching and for comment glad you was able to get mirror fixed please subscribe if haven't already share and check out my other helpful videos.
That was a great video. I was able to use a C shaped valve spring compressor to put that ring back on. Once you have it back together, drill a couple holes in the cast aluminum piece and put a roll pin, nail, or wire through both sides and it can never slide apart again.
I had exactly the same issue w/ my 2001 Tahoe.
With the help of the video I was able to fix it without breaking anything and it works fine. Thanks for the useful guidance.
Your welcome glad could help please subscribe like and share and check our my other helpfull videos.
Maaaaaan thank you so much. 👏👏💪You just saved me 150€. Greetings from Austria
Your welcome glad could help thanks for commenting. please subscribe like and share and check our my other helpfull videos.
Awesome video! Thought I needed a whole new mirror. Saved me $50! Thanks a bunch!
Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos
thanks so much, i used c-clamps to compress the spring. saved me money.
Good ideal to use C-clamp👍
Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos
Thanks so much for your video, I live in New Zealand where all Chevy trucks are imported and we are not able to just go and buy used parts at a wrecking yard for most models as they are hard to find here. New parts are available online but shipping costs are very high even if we can find some parts supplier who will even ship to NZ. So your video was a godsend when my mirror failed. Instructions were clear and like most people I was only a bit stuck when pressing the washer back on. I tried a valve spring compressor which was probably a little small to handle the job, I tried zip tying the spring after compressing it with a couple of vice grips but the ties I had werent beefy enough to hold it when I released the vice grips. In the end I used a couple of small G Clamps which worked out with the help of a friend. I was going to put a pin in as someone else suggested to help hold the washer down but opted for using a hot glue gun to liberally glue around the top which seems to be working great.....thanks :-)
Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos
Thanks brother..just bought a beautiful white 03 yukon and the driver side mirror was.loose and the dealership just put a peice of cardboard under it to hold it in and I found your video and i finally fixed it!!! Saved me $110 bucks .from buying a whole new side mirror
Great trucks👍Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos
Just yesterday my drivers mirror started to wobble somewhat. It certainly was very irritating and this video shows me exactly what I need to do to fix it. Thanks!
Steve Hersh thanks for watching and commenting glad video was able to help show you how to fix it. Please Subscribe and share if haven't already and check out my other helpful videos.
The only video that helped me out thank you brother you a real one
You're welcome glad could help
Just what I was looking for. Saved me a trip to the junkyard. Thanks
Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos
Tried fixing my 2002 denali and the assembly was totally diffrent and wasnt able to fix. Now my 2003 silverado was similar to the one on this video and ibwas able to fix it. Out of nowhere this mirror was like this. I always fold the mirror by hand and park my truck in the garage. I went to fold it back open and it was loose. Thanks to this video i was able to fix it. 1 tip, The spring was so hard to push down what i did was hit it down with a flat head screw driver between the teeth on the ring. But make sure the teeth are back down because mine was up.
You're welcome! Glad could help Please subscribe like and share and check out our other helpfull videos
Man thats the best video on mirror repair on youtube.i have an 03 silverado & its doing the same thing.youre video is strait to the point & very clear.i can swap engines & trannys & rear ends but this one stumped me lol.i think i can handle it now.i subscribed.first video ive ever subscribed to.thanks man.
Your welcome, Lol I no how That is sometimes it's the little things that cause the most problems. Thanks for watching & commenting and sub, glad could help.
Thank you very much for this very detailed video. This just happened to me last week, saved me money and time.
Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos
Thanks for the video! The spring and cap on my Silverado are pretty rusty so it was tricky to get them down. Ended up using vice clamps to help drive it down while pushing with the flat part of a hex screwdriver. Whew! Glad to have my mirror secured. =)
Yes can be hard to get down sometimes.Glad could help👍Please subscribe & like and share if haven't already and check out our other helpful videos
Really good video and helped me fix my broken mirror. Thanks!!
Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos
Good video and Thanks... that's just what happened with my truck and now it's fixed!
Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos
thanks a lot your video saved me having to buy a new one!!
Manchester Roofing Systems thanks for watching glad was able to help. Please Subscribe and share if haven't already and check out my other helpful videos.
Very helpful video. My Silverado mirror rattles so I’ll follow your instructions to disassemble but may need to fix something else inside. Thanks.
Your welcome, Thanks for watching and commenting glad could help hope you get it fixed. Please subscribe & like and share if haven't already and check out our other helpful videos
EXACTLY the solution and information that I needed! THANK YOU!
Your welcome glad could help please subscribe like and share and check our my other helpfull videos.
I tried to press the locking washer via two clamps, and also jacking the washer downward using a small screwdriver... however, I finally removed the mirror assembly from the car and temporarily pulled the wire from the locking nut to give access to a VISE to first press the locknut flat and mostly to press it onto the tube using an oversized socket (note: used three sizes above the socket that fit the tube in order to allow the locknut to sufficiently flex when pressing it on.) I probably didn't need to do this, but I tack-welded two sides of the nut to make sure it wouldn't slip.
Awesome video
Back together in a flash.
You're welcome! Glad could help Please subscribe like and share and check out our other helpfull videos
Thanks that was exactly what I needed
Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos
Excellent step by step guide, thanks
Bruce Harnden thanks for watching and commenting. Please Subscribe and share if haven't already and check out my other helpful videos.
Thank you! Thank you! Thank you! This was an easy fix thanks to you. I can't say thank you enough.
You're welcome glad could help
this is exactly what i needed to see! thanks!
Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos
Subscribed after watching, this helped alot thank you!
Thanks for sub and watching
thank you for uploading!! appreciated!
Your welcome glad could help please subscribe like and share and check out our other helpfull videos.
Most helpful! Thank you very much for posting this video.
Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos
@@Flashback502 the same problem. That clip ring was off the tube. Was fearing the idea of buying a new mirror assembly. Bought this Tahoe for a song. It was neglected for a couple years. Been replacing worn parts and bring it up to A-1 condition. Is a 2001, now My wife is driving a near new, 20 year old, beautiful vehicle. Only gave 3500 for it, 145k miles. Is now in excellent shape. Thanks again.
Hell yeah I think you just showed me how to fix my issues thanks brotha
Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos
Very helpful video, thanks!
You're welcome! Glad could help Please subscribe like and share and check out our other helpfull videos
Thanks! Worked great.
Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos
Had to repair the passenger side mirror on the wife's Denali. Found out if you tear it down further and remove to wires from the neck it is much easier, all you have to do is use a slightly larger socket that the neck and push everything back together with a bench vise.
Justin Hoyle Thanks for watching glad was able to help, also thanks for sharing some helpful tips on how to fix, please subscribe and share video, and check out my other helpful videos.
Thanks bro! you just saved me some money.
Your welcome glad could help. Please subscribe and share if haven't already and check out our other helpful videos.
Excellent explanation; thanks so much!
Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos
Very helpful you saved me money.
Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos
Great help thanks
thanks for share this tip. I try to fix my mirror.
Thanks for watching and commenting hope you get it fixed. Please Subscribe and share if haven't already and check out my other helpful videos.
Had to use a 1/2 inch extension holding one side down while I used a hammer to hit the other side voila, it works great.
Thanks for watching and commenting glad was able to help with mirror. Please Subscribe and share if haven't already and check out my other helpful videos.
Thank u. It deff help bro!
Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos
Thank you sir, I'm about to go fox my mirror.
Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos
Definitely going to try this on my Tahoe later.. not trying to spend 200$ for a new set
Hope it works for you. Please subscribe & like and share if haven't already and check out our other helpful videos
Gracias por el video creía que tenía que remplasar todo el espejo👍
Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos
Good video man!
Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos
Great video.
Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos
What is that plastic around the motor called with the two looking batteries
Great Video Bro...
Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos
thanks ,this helped
Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos
Hey. Great video. Mine is starting to wobble and hopping to not have to buy a new one. I have power folding mirror. Does this fix apply to these as well? Thanks again.
Yes should work. Please subscribe & like and share if haven't already and check out our other helpful videos
L1C4 baby! yeah
All day 👍Please subscribe & like and share if haven't already and check out our other helpful videos
Best how to get there and fix it on these yet! THANKS
Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos
This shit just happened to me 5 minutes ago. Great video. Thanks for sharing.
Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos
Thanks...
Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos
Gracias por el video
Your welcome glad could help.
I tried this and I couldnt pop the tabs off behind the glass and ended up shattering the glass. Yay.
I got as far as taking the hub/housing apart with no problem, but the clip was a problem I bent the tabs as you instructed but I could not get the ring to go over the spring. At the end of your video I did not see how you press that cap/ring over the springs, show me how you did that...
It was no picnic. We were fortunate enough to have a couple of pairs of channel locks. We used one pair of channel logs to compress one side of the spring, and a pair of pliers and a hammer to compress the other side at the same time. Took us about ten minutes to figure it out, but it works.
I know this video is 3 years old but I wanted to know if you have to remove the mirror in order to make the repair
Most cases Yes
My fix was 2 strips of tie wire. Tow mirrors eventually
Thanks for watching and commenting glad you got it fixed. Please Subscribe and share if haven't already and check out my other helpful videos.
does this work for a 2014 gmc power mirror?
Should be the sane process if neck of mirror is broken.Please subscribe & like and share if haven't already and check out our other helpful videos
Very helpful but how the heck did you end up compressing that spring to get the collar back on? I'm stumped.
Thanks for watching lol yea took patience and vice gripps and needle nose, took about 10m to get it done. Please subscribe and share and check out our other helpful videos.
Dam dude you are about to save me some cash
Thanks for watching and commenting glad was able to help. Please Subscribe and share if haven't already and check out my other helpful videos.
my screw in the hole is a dud like it wont screw out.:/
Hope u got it fixed, Please subscribe & like and share if haven't already and check out our other helpful videos
I dont know why in the world you would make this video and title it fix brocken side mirror neck chevy ect.... if youre going to skip the most important part of this tutorial,how to actually press down on that spring and cap its almost impossible?
Thanks for watching I used needle nose and vice gripps it took about 15min to get it down that's why didn't show it, was told video would be to long.
I used 2 large wood clamps and a large flathead screwdriver
Thanks for info on how you got it down. Please subscribe & like and share if haven't already and check out our other helpful videos
I'd like to meet the clown ("engineer") that designed this cheap junk...ridiculous...
Lol Please subscribe & like and share if haven't already and check out our other helpful videos
🙏 god bless you sir … thank you for you lessons appreciate