Hey man I've been a mechanic for 30 years never even tried to do it myself till I saw you don't be so hard on yourself I'm sure you helped out thousands of people great job
Day 2 of fighting and getting my ass kicked. 1 bruised clavicle, and knot on the forehead later, 3:32 video and I got it on in 1 minute. What a time to be alive
I am a tire technician and I mount at least 1 tire a day using machinery or specially made tools to do it manually. But about once every 2 years I have to do it the hard way with 2 pry bars and sadly I forget the techniques that make it easier. So I go to UA-cam and what do you know I was simply taking to big of a bite. Corrected myself after watching this video. Now I have my feet up relaxing 😎
Thank you very much single mother and I gotta learn how to do mostly everything myself cause can't afford a garage bill n can't afford another vehicle so every little bit of info helps thanks again have a blessed day
i don't doubt what you're saying, but you need to find a new shop. every tire machine i worked on uses plastic duckheads on the wheel so it doesnt scratch it, and unless you have runflat tires, you dont need to use a prybar at all. you can push the tire onto the wheel with your hands as long as you have the top bead under the drop canter.
@@sl33ksnypr285652 I've been to LOADS of tire shops. They find a way to ding a wheel or worse about 50% of the time. I'm not even exaggerating. I'm SO sick of it.
I am giving you huge virtual hugs right now dude.. my bf has been fighting to get his tire on the rim all day.. I found your video showed it to him had it on in about 3 min.. THANK YOU BUNCHES❤🎉🎉❤😊😊
For anybody who is wondering, this is just like you do it on a bike, only the rim is larger and the tire sidewall is stiffer. You want to be careful using something that's sharp at the end for a prybar to make sure you don't rip the bead or it won't hold air.
Thanks a ton. I’ve mounted a lot of tires at home and this is making my life easier! This method is simple and I greatly appreciate the short to the point video!
That is amazing. I haven't put my tires on yet, but I was afraid it would turn into a 2 hour project. Now that I've seen it, I think I can make it happen. Thank you!
As we are living in these self isolating apocalyptic times these skills become more vital. After watching your vid I just went and fitted the tyre to the wheel for the mad max matt black V8 hot rod I'm cobbling together on my driveway to pass the time. One trip to the tyre fitting shop avoided. Thankyou.
Thanks for posting this video! I like how you kept it quick and to the point. I purchased new rims for my truck and was able to mount the tires with zero scratches by myself thanks to your technique! I did end up cutting som small pieces of rubber hose about 3 inches long, then slice them in half the long way. These were used at any point the prybar (I used a flat blade screwdriver) contacted the rim, just to insure I didnt chip or dimple the rim. Took me about 2x as long as you, but I feel was a good investment. Thanks again!!
Nice, great job! I like how you put the cardboard underneath so you don’t scratch anything. Do you have a video showing how to take one off including breaking the bead?
a tip: lubricate well the inside of the bead facing the exterior of the wheel, it supports the friction involved in the passing over the exterior of the wheel Often, I use a mixture of about 25% liquid dish soap with water tu lube the bead I use it also for loosing the tire bead, I spread this lube and with my manual machine, it is very easy to break the bead( I spread the lube and repeatly apply the force to permit the lube to penetrate the joint)
no, there is not a great quantity of soapy water, and before reinstalling the tire on the wheel, i just check and remove puddle if there is one.@LifeWithEmin
At the shop I work at we use dawn for lubing the tires which is much cheaper. Also when dealing with an aluminum rim I suggest using a tire iron with a rubber encased tip so it doesn't scratch your rims.
Hey thanks for the video I just got all my tires mounted on a set of rims but sorry for the stupid question, how do air up the tires? No matter how much air I’m putting in the air is seeping out and now airing up the tire. Sorry this is my first time doing this.
I'm going to try it. Especially now that we can get tires ordered online for a low price, I'm going to. I just paid $150 to have my RV tire mounted and balanced and all the local tires stores are charging the same. Thank you.
this video helped me a lot, giving me the courage to try it myself, i mounted a set of 215 45 r18 XL, putting the starting side of each bead in the recess of the rim is an essential part to achieve it.
i used 3 levers made for tires that are almost flat on the edge and tire mounting grease on both inside and outside of the beads. i got the mounging grease for 8$ for 5kg
I used ratchet straps to air up my boat trailer tires. Worked great ! Both aired up first try. Thought for sure i was going to need the starter fluid method.
I’d like to know how hot it is outside when you did that .. makes a huge difference mounting cold tires versus ones that have been sitting in hot weather or the sun ..
Hey man, I saw these beasts on UA-cam doing the same thing you did and I was like sad thinking I couldn't do it manually without scratching the wheel, but you proved it is possible. Thank you so much, I'll be doing my own tires.
Nice job. I've never seen that done by hand before. Kudos to you for passing your knowledge along to others. People with negative comments = just pissed because they can't do it. Thanks for the lesson!
This might be a dumb question but can I just mount the easy side to the side of the rim which is on the outside of the car? Like when couldn't he just flip the rim upside down and do the same thing he did? That way he wouldn't have to worry about suffing the side of rim that people can see.
thank you for posting this video it helped me out a lot today with my tire change. I was about to give up but kept at it and that feeling i got when the second bead was on, man that's something money at a tire center can't buy.
my tire is stuck like 2:18 no matter what i do i cant get it passed this step its like its too small but its not! ive spent an hour so far struggling with this but im just doing it to learn
Thanks for this. You are a great humanitarian. Best tire mounting video for the ages, nobody needs to do this again. Windex and actual wood prybar shows that anybody can do this!!!
I've mounted some 8.5" sidewall tires before, but I could not for the life of me mount my 5" sidewall tires. This is THE best technique to mount tires. I've easily installed these lower profile tires following your instructions. Thank you my man ! 🙏
Good video. The other one I watched was useless. The cameraman kept trying to be a comedian and talked over the guy changing the tire. The guy doing it wasn't very descriptive, he had special pry-bars designed to change tires and all he said was "You do this, then that and then this, and then it's on. Meanwhile the cameraman was focused on him and the tire wasn't even in frame half the video. I got the impression he was more interested in showing off how fast he could do it than trying to show anybody watching how to do it. I spent an hour after watching the other video with no progress. Then I watched this video and got the tire on in 5 minutes. Thanks again. It's snowing outside and my spare was also flat. I'm having a bad day so far. This video just made my day better.
Nice demonstration video. I know that feel’s good to take care of that yourself. Glad you really expressed how important it is to have your weight on your knee driving the tire down to the center of the rim! People definitely have to understand that. Nice work!
Your mileage will vary. Having installed hundreds of tires on all different brands of rims and tires, I can say for sure that some will go as easily as this video, and some will give you bloody knuckles and require enormous leverage (we're talking metal poles many, many feet long) to get the bead over the rim.
this really does work even if you have a thicker more stubborn tire. im 150 lbs..... as long as you position the edge of the tire (during installing/removing) so it lies in the thinner portion of the rim. it may be a struggle if you havent done it before and youll work up a good sweat. all you need is a long thick screwdriver and a good pry bar
Thanks for posting this video. It definitely helped me. My local tire shop wants 80.00 to mount and balance 4 tires. I thought that was kind of crazy. After watching your video I have the confidence to try it myself.
You are a gem... Thank you. You work like a gentlemen unlike these previous clips I seen on here 🤦🏽♂️, with these same tire size too! I can understand low profile tires being a pain but anything bigger then what you have here should be cake work. Again thank you
Controversial or Debatable Multiple people use and comment on using soapy water solution For dismount & mount However Multiple other people for mounting go with Tire Lube or equivalent I have noticed that soapy solution may be the cause of inner tire lip deterioration I am not 100 percent or for sure because after 10 year old aged tire the rubber spider cracks , discoloration, and other issues become Problematic Thanks for everything and thumbs up 👍👍👍👍
You are my hero. What a rock star. You make me think that I can do this, too. Thank you so much for the video and the awesome attitude, as well. Be safe!
good job. I do mine this way. If you go slow, and work the last couple of times patiently, can do it without damaging anything. and if you are worried about the piece around the rim, go a little slower. shops can damage that lip too.
Richard Carson ur right about that dam shop damage the lip of my rim and when i complaint they said there not responsible for damge dome to rims dam dumb asses
Yeah a young guy at Discount tire scratched all 4 of my brand new rims! The manager made it right and got them all powder coated instead of original paint so in the long run was better. But man was I pissed and quit annoying switching out one at a time over a month process.
yes you can seat the bead at home , take a retching strap wrap it around the tire , tighten down , fill with air , you are now done , don't knock it till you try it .
Nice video. I would just like to add that you should always start with the outside part of the rim up. Otherwise you are going to have a hell of a time.
A local tire shop installed new tires on my "like new" alloy rims yesterday (13 Mar 2019). Estimate to repair their handy-work to the rims is $1,184 plus tax.
@@Zenairo Almost. Fortunately, I had asked the Manager to look at the wheels before they starting working on the tires. The Manager's exact words were: "they look like new rims". He assured me that they were capable of doing a "professional job". When they had finished installing new tires, every wheel had deep scratches around the perimeter of each rim. As an added bonus, there were what appeared to be peen marks across several of the spokes. I assume this was caused by dropping a tire iron onto the spokes. All-in-all, not a good day.
Thank you I never learned in high school and I race junk cars but never had to changes tires never had an issue with it but now I have to and this has made it so easy
Impressive! Great job, great video mister! Didn't know low profiles could be done by hand...tried it, did it👍. PS. I actually won some bets doing it as well...LOL
Jeff Flowers is incorrect.. You can not mount it from the back side of the rim because the drop center is towards the front.. You will struggle dearly trying to work that bead on from the back and the chances of injuring yourself in the process go up exponentially.
Lightning Autowerks™ 1. Use Zytel polymer Irons or use 18" sections from shock corded fiberglass tent poles 2. If using steel irons install some duct tape around the edge of the rim and work carefully 3. Take it to a tire shop and have them do it on a machine.
Thank you going for 1&2 I'm too nervous at the chance of anyone else messing wheels up but more comfortable taking my own chance at least Id know every little move was gentle being my own stuff haha. Gonna try taping around and maybe rags where I use the iron to mount
The functionality of the personal balancer is great but probably not equipped to handle wheels larger than 15-16". They balance a trailer tire/wheel in the demonstration clip for harbor freight, which is rather unrealistic. Great idea, just not for a lot of modern vehicles.
@Frank Lopez So your going to drive on unbalanced tires. You realize that the only to options are to pay the shop or buy your own balancer. Which costs about the same price either way. Are you sure you are not the one trolling here. You seem to not undertand how things work.
You can, but you need something to balance it with. There are literally hundreds of different ones you buy ranging from $40-$35k. The $40 is for older, or smaller sized wheels. It's a pole with a level on it. Works great and does what it needs to. However with larger wheels it's not the best. But it'll get you close. Your best best is to take it to a shop, they can't really s uff the rims doing that.
Dude that’s crazy that it takes you five minutes what takes a tire shop 30-45 minutes sometimes even hours Now i don’t have to pay 20$ for them to take off and put on tires
Taking off and mounting tires are quick and easy depending on the profile of the tire. What takes the longest is honestly setting up the car on the lift, gathering the tires, then taking all 4 tires to the machine, and balancing, then filing the paperwork properly. Thats not even including the other 5 cars ahead of you as well.
Excellent video and excellent comments as far as I read. Installing 4 new tires on my Toyota will save me over $100 because I already have the equipment to balance the tires after installation. It's about saving money and accomplishing a new DIY task. I also give my thanks to the author of the video.
Nabre Labre 100% Or what usually happens is drop them off at 8, the shop says come back at 3 and they will be done. You come back and they aren’t done and you end up waiting till 5. ALL DAY LONG TO GET TIRES MOUNTED.
I disagree I have buggies 14 in right now I have eight tires to change I bought a manual changer to break the bead and a manual balancer $75 for both they are both old school..... It will be a little over $125 saved and just one project.. . And they usually have three or four during new season.... Awesome video
great video. there are some tires that are harder to dismount. there is a trick. you add a solid object to the bottom of the wheel like a 2x4 or a block of metal, wood, plastic..etc. another trick is to use a clamp with a rag on top of the rim (rag to protect the rim) this will hold down the tire from popping up and will make it a 2min job.
Great video! I noticed that the tire isn't flush against the rim on the near-left side when the video ends, will it just push out when you inflate the tire?
Hey man I've been a mechanic for 30 years never even tried to do it myself till I saw you don't be so hard on yourself I'm sure you helped out thousands of people great job
Yeah it saves me sixty dollars a tire now days.
How 60$!
Hundreds of thousands!
Day 2 of fighting and getting my ass kicked. 1 bruised clavicle, and knot on the forehead later, 3:32 video and I got it on in 1 minute. What a time to be alive
I am a tire technician and I mount at least 1 tire a day using machinery or specially made tools to do it manually. But about once every 2 years I have to do it the hard way with 2 pry bars and sadly I forget the techniques that make it easier. So I go to UA-cam and what do you know I was simply taking to big of a bite. Corrected myself after watching this video. Now I have my feet up relaxing 😎
1?? Lmfao so not a real tech. Been doing this 25 years all the way up to off road mining tires.. never had a 1 tire a day
1 tire a day? What are you changing a unicycle tire
@callmeworm8441 I said atleast 1 a day. 10 years of public bus tires
It's very difficult, anyone who can do this can do anything.
The focus of this video should be, in my opinion, learn to do for yourself first. It isn't about saving $20. It's about knowing how to mount a tire.
$20 per wheel and balance so actually $80
Koalafications4Dayz well you want to get it balanced but installing it to get from point a to point b is nice. Or for drifting or something.
well it goes without saying.
ui
@@davidhur09 exactly!
Thank you very much single mother and I gotta learn how to do mostly everything myself cause can't afford a garage bill n can't afford another vehicle so every little bit of info helps thanks again have a blessed day
In a similar situation....we can do this! One step at a time.
and since you cant afford a husband either lol
j wizz That’s not how marriage works you can’t buy someone into marriage
@@tville4358 debateable
@@LightlessAMG Definitely debatable. Some women get a house, then find a man who conveniently doesn't have one.😄
hell yeah. man, tired of these shops scratching rims and claiming they didn't do it and for $20/30 charge too! very helpful.
i don't doubt what you're saying, but you need to find a new shop. every tire machine i worked on uses plastic duckheads on the wheel so it doesnt scratch it, and unless you have runflat tires, you dont need to use a prybar at all. you can push the tire onto the wheel with your hands as long as you have the top bead under the drop canter.
@@sl33ksnypr285652 I've been to LOADS of tire shops. They find a way to ding a wheel or worse about 50% of the time. I'm not even exaggerating. I'm SO sick of it.
@@ccjohncc1 Well if you do it like this guy does, you'll ding the hell out of your rims.
I am giving you huge virtual hugs right now dude.. my bf has been fighting to get his tire on the rim all day.. I found your video showed it to him had it on in about 3 min.. THANK YOU BUNCHES❤🎉🎉❤😊😊
thank you for giving us younger generation the confident of DIY( do it yourself), when we have to.🙏👍 God Bless ya’ll
For anybody who is wondering, this is just like you do it on a bike, only the rim is larger and the tire sidewall is stiffer. You want to be careful using something that's sharp at the end for a prybar to make sure you don't rip the bead or it won't hold air.
Thanks bruh! I just mounted 4 winter tires on steelies in about 15 minutes. Much easier than I thought. Enjoy the Holidays.
Johnny CincoCero better hope u balanced those puppies
Did you balance them? How hard is diy balancing?
Johnny CincoCero bruh
@@MarshallBLewis No...I didn't balance them. Have them balanced at your local tire shop.
Congratulations
Thanks a ton. I’ve mounted a lot of tires at home and this is making my life easier! This method is simple and I greatly appreciate the short to the point video!
That is amazing. I haven't put my tires on yet, but I was afraid it would turn into a 2 hour project. Now that I've seen it, I think I can make it happen. Thank you!
As we are living in these self isolating apocalyptic times these skills become more vital. After watching your vid I just went and fitted the tyre to the wheel for the mad max matt black V8 hot rod I'm cobbling together on my driveway to pass the time. One trip to the tyre fitting shop avoided. Thankyou.
Thanks for posting this video! I like how you kept it quick and to the point. I purchased new rims for my truck and was able to mount the tires with zero scratches by myself thanks to your technique! I did end up cutting som small pieces of rubber hose about 3 inches long, then slice them in half the long way. These were used at any point the prybar (I used a flat blade screwdriver) contacted the rim, just to insure I didnt chip or dimple the rim. Took me about 2x as long as you, but I feel was a good investment. Thanks again!!
Do you have a video on how to remove the old wheels first?
Nice, great job! I like how you put the cardboard underneath so you don’t scratch anything. Do you have a video showing how to take one off including breaking the bead?
I screwed around for 2 hours, took a break and watched your video. I had the tire on the wheel in 3 minutes. Thank you.
3:08 "If not? … then you can take a hike!" that was the fitting next line with his tone there. Haha :P
a tip: lubricate well the inside of the bead facing the exterior of the wheel, it supports the friction involved in the passing over the exterior of the wheel
Often, I use a mixture of about 25% liquid dish soap with water tu lube the bead
I use it also for loosing the tire bead, I spread this lube and with my manual machine, it is very easy to break the bead( I spread the lube and repeatly apply the force to permit the lube to penetrate the joint)
no, there is not a great quantity of soapy water, and before reinstalling the tire on the wheel, i just check and remove puddle if there is one.@LifeWithEmin
At the shop I work at we use dawn for lubing the tires which is much cheaper. Also when dealing with an aluminum rim I suggest using a tire iron with a rubber encased tip so it doesn't scratch your rims.
Hey thanks for the video I just got all my tires mounted on a set of rims but sorry for the stupid question, how do air up the tires? No matter how much air I’m putting in the air is seeping out and now airing up the tire. Sorry this is my first time doing this.
I did mount 2 tires by myself and use them to the drag strip! Turns out I won couple of races! Thank you!
Can confirm this method still works in 2022. Also can confirm everyone except me knew that 0:56 was the easy side 🙆🏼♂️. Thank you 🙏🙏🙏
Omg I did not think I could do it and it actually worked! I mounted a tire in my livingroom in less than 5 minutes! Thanks so much
I'm going to try it. Especially now that we can get tires ordered online for a low price, I'm going to. I just paid $150 to have my RV tire mounted and balanced and all the local tires stores are charging the same. Thank you.
this video helped me a lot, giving me the courage to try it myself, i mounted a set of 215 45 r18 XL, putting the starting side of each bead in the recess of the rim is an essential part to achieve it.
i used 3 levers made for tires that are almost flat on the edge and tire mounting grease on both inside and outside of the beads. i got the mounging grease for 8$ for 5kg
That’s awesome! Do you balance them as well after? I wonder because I’ve seen some info on diy balancing, but I’ve never attempted that. Cheers!
This video is one of the best DIY videos that I have seen. Thank you for your help!
Tip: next use a ratchet strap and secure it around it. Tighten it to align the tire around the rim for easier air filling.
I've seen a video where they used lighter fluid to do that.
Spray a little starting fluid in it then ignite it and it will pop it on.
I used ratchet straps to air up my boat trailer tires.
Worked great ! Both aired up first try.
Thought for sure i was going to need the starter fluid method.
Yes, this is a great method! the fire method is a pain in the ass. Much prefer the ratchet strap method.
Thats stupid. You dont want to bend your tire that way. Also dont use starting fluid please. Its dangerous and stupid
I’d like to know how hot it is outside when you did that .. makes a huge difference mounting cold tires versus ones that have been sitting in hot weather or the sun ..
Hey man, I saw these beasts on UA-cam doing the same thing you did and I was like sad thinking I couldn't do it manually without scratching the wheel, but you proved it is possible. Thank you so much, I'll be doing my own tires.
How Do you Break The bead then get the tyre off. You Started with an empty rim. Thanks.
Nice job. I've never seen that done by hand before. Kudos to you for passing your knowledge along to others. People with negative comments = just pissed because they can't do it. Thanks for the lesson!
This might be a dumb question but can I just mount the easy side to the side of the rim which is on the outside of the car? Like when couldn't he just flip the rim upside down and do the same thing he did? That way he wouldn't have to worry about suffing the side of rim that people can see.
thank you for posting this video it helped me out a lot today with my tire change. I was about to give up but kept at it and that feeling i got when the second bead was on, man that's something money at a tire center can't buy.
my tire is stuck like 2:18 no matter what i do i cant get it passed this step its like its too small but its not! ive spent an hour so far struggling with this but im just doing it to learn
Did you push opposite side down deep into rim at least like he did?
@@miguelhughes9783 yes i eventually figured it out i just needed to put the other side down into the rim more and it worked!
Thank you, very useful! Any hints for balancing?
Hold one ear
Thanks for this. You are a great humanitarian. Best tire mounting video for the ages, nobody needs to do this again. Windex and actual wood prybar shows that anybody can do this!!!
I've mounted some 8.5" sidewall tires before, but I could not for the life of me mount my 5" sidewall tires.
This is THE best technique to mount tires. I've easily installed these lower profile tires following your instructions. Thank you my man ! 🙏
Good video. The other one I watched was useless. The cameraman kept trying to be a comedian and talked over the guy changing the tire. The guy doing it wasn't very descriptive, he had special pry-bars designed to change tires and all he said was "You do this, then that and then this, and then it's on. Meanwhile the cameraman was focused on him and the tire wasn't even in frame half the video. I got the impression he was more interested in showing off how fast he could do it than trying to show anybody watching how to do it. I spent an hour after watching the other video with no progress. Then I watched this video and got the tire on in 5 minutes. Thanks again. It's snowing outside and my spare was also flat. I'm having a bad day so far. This video just made my day better.
Nice demonstration video. I know that feel’s good to take care of that yourself. Glad you really expressed how important it is to have your weight on your knee driving the tire down to the center of the rim!
People definitely have to understand that. Nice work!
Your mileage will vary. Having installed hundreds of tires on all different brands of rims and tires, I can say for sure that some will go as easily as this video, and some will give you bloody knuckles and require enormous leverage (we're talking metal poles many, many feet long) to get the bead over the rim.
I have incredible respect for the men that do this for a living
this really does work even if you have a thicker more stubborn tire. im 150 lbs..... as long as you position the edge of the tire (during installing/removing) so it lies in the thinner portion of the rim. it may be a struggle if you havent done it before and youll work up a good sweat. all you need is a long thick screwdriver and a good pry bar
Thanks for posting this video. It definitely helped me. My local tire shop wants 80.00 to mount and balance 4 tires. I thought that was kind of crazy. After watching your video I have the confidence to try it myself.
what did you use for weights
Awesome going to do this. But how do you set the bead? Just fill it up with air?
You are a gem... Thank you. You work like a gentlemen unlike these previous clips I seen on here 🤦🏽♂️, with these same tire size too! I can understand low profile tires being a pain but anything bigger then what you have here should be cake work. Again thank you
Controversial or Debatable
Multiple people use and comment on using soapy water solution
For dismount & mount
However
Multiple other people for mounting go with
Tire Lube or equivalent
I have noticed that soapy solution may be the cause of inner tire lip deterioration
I am not 100 percent or for sure because after 10 year old aged tire the rubber spider cracks , discoloration, and other issues become
Problematic
Thanks for everything
and thumbs up 👍👍👍👍
You are awesome! Straight to the point and no fluff. Thank-you, sir!!
Thank you for making this video. I’m going to try this. Given our budget crunch, I’m trying to keep from spending money any safe way I can.
You are my hero. What a rock star. You make me think that I can do this, too. Thank you so much for the video and the awesome attitude, as well. Be safe!
How can I know which side goes front and back? Thanks for the video.
good job. I do mine this way. If you go slow, and work the last couple of times patiently, can do it without damaging anything. and if you are worried about the piece around the rim, go a little slower. shops can damage that lip too.
Richard Carson ur right about that dam shop damage the lip of my rim and when i complaint they said there not responsible for damge dome to rims dam dumb asses
They use a JohnBeam tire machine with rubber heads and they still damage the rim
Yeah a young guy at Discount tire scratched all 4 of my brand new rims! The manager made it right and got them all powder coated instead of original paint so in the long run was better. But man was I pissed and quit annoying switching out one at a time over a month process.
gosh i appreciate someone who get right to the point. Thank you.
yes you can seat the bead at home , take a retching strap wrap it around the tire , tighten down , fill with air , you are now done , don't knock it till you try it .
What about balancing the tire so it dont vibrate on the highway...
Thank you so much, definitely a thumbs up!! Now, do you have a vid to un-mount a tire by hand?? Thanks in advance
Nice video. I would just like to add that you should always start with the outside part of the rim up. Otherwise you are going to have a hell of a time.
I owe a big thanks to you. This video helped me alot to out tire back into rim.
Thanks again!
you sir have just saved me alot of hastle and money thank you!
this is definitely the best tutorial so far and its 8 years old
A local tire shop installed new tires on my "like new" alloy rims yesterday (13 Mar 2019). Estimate to repair their handy-work to the rims is $1,184 plus tax.
My brand new set of Enkei's was 1200, did they melt all of your rims into a puddle or something?
@@Zenairo Almost. Fortunately, I had asked the Manager to look at the wheels before they starting working on the tires. The Manager's exact words were: "they look like new rims". He assured me that they were capable of doing a "professional job".
When they had finished installing new tires, every wheel had deep scratches around the perimeter of each rim. As an added bonus, there were what appeared to be peen marks across several of the spokes. I assume this was caused by dropping a tire iron onto the spokes. All-in-all, not a good day.
Fuck your rims, bitches😁
Thank you I never learned in high school and I race junk cars but never had to changes tires never had an issue with it but now I have to and this has made it so easy
Impressive! Great job, great video mister! Didn't know low profiles could be done by hand...tried it, did it👍.
PS. I actually won some bets doing it as well...LOL
AWESOME VIDEO! how do you balance them?
This is a great video to get you out of a pinch or simply DIY. Great technique. Never mind the foolish comments, Thanks for sharing.
That won't work on rusted tires, low profile tires you will never be able to take them on or off and will scratch, dent destroy the rim
@@infiniti37G rusted tirers ????
Just put the tire on,not hard
@@singtracks rusted rims, more like lol
Hey brother your a Genius I’ve been wrestling with this tire for 2 hours now
Jeff Flowers is incorrect.. You can not mount it from the back side of the rim because the drop center is towards the front.. You will struggle dearly trying to work that bead on from the back and the chances of injuring yourself in the process go up exponentially.
Best way to not mess up the wheel then?
Lightning Autowerks™ 1. Use Zytel polymer Irons or use 18" sections from shock corded fiberglass tent poles 2. If using steel irons install some duct tape around the edge of the rim and work carefully 3. Take it to a tire shop and have them do it on a machine.
Thank you going for 1&2 I'm too nervous at the chance of anyone else messing wheels up but more comfortable taking my own chance at least Id know every little move was gentle being my own stuff haha. Gonna try taping around and maybe rags where I use the iron to mount
Lightning Autowerks™ Rags will definitely work.
Lightning Autowerks best way to not mess it up? take it to Costco $15
Do you have to work with the wheel face up or can you have the back side up?
Ah thank you! Definitely worth doing it myself over 39$ a tire at the shop 😵💫 and an excuse to buy myself a new toy... the prybar 🤷♂️
This is great! What are the names of the tools you use? I'm new to this.
yeah!!! But still you need to pay for the balance !! Can you balance by hand?
m.harborfreight.com/portable-wheel-balancer-39741.html?Fnot%20provided
@Frank Lopez tell that to Scotty you random dumbass on the internet.
ua-cam.com/video/KY5vTmOPP1c/v-deo.html
The functionality of the personal balancer is great but probably not equipped to handle wheels larger than 15-16". They balance a trailer tire/wheel in the demonstration clip for harbor freight, which is rather unrealistic. Great idea, just not for a lot of modern vehicles.
@Frank Lopez So your going to drive on unbalanced tires. You realize that the only to options are to pay the shop or buy your own balancer. Which costs about the same price either way. Are you sure you are not the one trolling here. You seem to not undertand how things work.
You can, but you need something to balance it with. There are literally hundreds of different ones you buy ranging from $40-$35k. The $40 is for older, or smaller sized wheels. It's a pole with a level on it. Works great and does what it needs to. However with larger wheels it's not the best. But it'll get you close. Your best best is to take it to a shop, they can't really s uff the rims doing that.
What was the spray you used? Was it a mix of Windex and Soap? Would that be dish soap?
Dude that’s crazy that it takes you five minutes what takes a tire shop 30-45 minutes sometimes even hours
Now i don’t have to pay 20$ for them to take off and put on tires
Taking off and mounting tires are quick and easy depending on the profile of the tire. What takes the longest is honestly setting up the car on the lift, gathering the tires, then taking all 4 tires to the machine, and balancing, then filing the paperwork properly. Thats not even including the other 5 cars ahead of you as well.
Do you think it would help to wrap some duct tape around the crowbar to avoid any scratches during the installation?
thanks
Hi do u mean index clean glasses, hubby will do it or can be any kinda of wet soap
this the old school way good video
Excellent video and excellent comments as far as I read. Installing 4 new tires on my Toyota will save me over $100 because I already have the equipment to balance the tires after installation. It's about saving money and accomplishing a new DIY task. I also give my thanks to the author of the video.
I always found de-mounting the tire to be the actual pain in the ass.
Just uninflate it and cut it off.
Thanks for the video. How do you air the tire up?
Ok its decided, I'm doing this myself, sick and tired of wasting my day at the tire shop
Nabre Labre
100%
Or what usually happens is drop them off at 8, the shop says come back at 3 and they will be done. You come back and they aren’t done and you end up waiting till 5.
ALL DAY LONG TO GET TIRES MOUNTED.
Davy Jones the shop I work at will have your car done, in about an hour and a half if you come in during the rush
I disagree I have buggies 14 in right now I have eight tires to change I bought a manual changer to break the bead and a manual balancer $75 for both they are both old school..... It will be a little over $125 saved and just one project.. . And they usually have three or four during new season.... Awesome video
Gonna have to try this! Drift life!
What do you mean? What's this got to do with drifting?
@@aa-vb9tj they have to change out their tyres more than others resulting in going to a tire tech and paying them. Doing this cuts out that expense..
Thanks a lot man, I must change the four tires of my woman's car but too broke to go to any shop. So this is very helpful, thanks again.
Time to try this with 34s on a 17” rim 😂
did it work?
@@shadexyz he’s still trying to get the second tire to go on
great video. there are some tires that are harder to dismount. there is a trick. you add a solid object to the bottom of the wheel like a 2x4 or a block of metal, wood, plastic..etc. another trick is to use a clamp with a rag on top of the rim (rag to protect the rim) this will hold down the tire from popping up and will make it a 2min job.
Pretty good all way round, especially for emergencies!
The trick of putting your foot on one of the irons is really good!
Thank you for saving my $20
Great video! I noticed that the tire isn't flush against the rim on the near-left side when the video ends, will it just push out when you inflate the tire?
Dan Fernandez yeah. When you blast it with air it’ll make the bead seat on the rim.
wrap that pry bar with cable insulation tape. Won't scratch rims.
It cuts the tape, and your back to how you started !!
Or use a condom !!
" slapyourself✋✋✋✋ .....
" look's out ''
........." vvindovv ''
How do you get the bead to take when you go to put air in it?
So when the tyre pops back on when using your air compressor can you do that with an ordinary foot pump ? Or will it only work with an air compressor?
Best video tutorial I have ever seen! Thanks
I never saw him turn the tire on the other side. Does it automatically adjust when you have the one side up, mounted?
Awesome. That’s awesome. My little girls and I were finding videos for it. Glad there’s no swearing!!! 😂😂
If i mount this tire how would i balance it manually? Or would i just take it to the shop to get it balanced after? (Im trying to learn more)
Good video I always hear that put in the air in the tires just as important. You can't use one of those portable ones Is that true?
couldn't you use the pry bars on the back if the face is on something that won't scratch it?
Thank you!
This is the best how to video on UA-cam!
Thank you so much. I just made an appointment for "Mount & Balance" in 2 weeks, charging $50. Now I will cancel. This helps hugely.
+wuligan still have to get them balanced
I thought it need the rubber flate and glue to keep air seal or am I thinking of bicycles? Is it really all that it takes?