Rogue 3.1 Adjustable Bench Assembly Video (that's right 3.1)
Вставка
- Опубліковано 5 жов 2024
- In this video I run through the whole assembly of the new Rogue 3.0 adjustable bench... The instructions weren't as easy as a crib from Ikea... so for all my visual learners out there...here ya go!
Titan Fitness... titan-fitness.... If you buy from this link, I get a small compensation at no extra cost to you!
If you like any of the shirts I wear in my videos, I designed them all (most likely) and here is the link to the store to purchase one... www.curlsinthe...
Download a free .PDF 12 Week Workout Plan curlsintherack....
(I still use this plan to this day)
Check Out Our Fitness Apparel curlsintherack....
Website: curlsintherack.com
Instagram: / curlsintherack
Facebook: / curlsintherack
info@curlsintherack.com
#roguefitness #garagegymreviews #adjustablebench
Hi, thanks for the helpful video. I just got mine today 2/24 and a lot of parts are now already attached. The messed up piece is attached and painted. Wheels were on and all spacers had zip ties holding the in place. Excellent bench and worth the stainless fee too. I ordered a Titian and it never shipped so I canceled it and got mine shipped in 2 days! Build quality is amazing and American made!
I just received mine (6/25) and it also came with the parts attached! Seems like that will be the standard going forward.
Thank you for showing the mistake because I'm assmebling mine right own right now and ran into the exact same issue and was going crazy!!
I just assembled mine last night and wanted to let folks know that Rogue sent my hardware out in three unlabeled bags, so don’t freak out if your bench comes like that and not with 5 numbered packages of hardware. Otherwise assembly was a breeze thanks to this great video!
I just got this and was putting it together today. I made the same exact mistake and couldn't figure out why it wasn't sitting flush. Glad this video confirms I'm not the only one. SMDH!
Dudeee the step where you flip the spine. I was trying to put that together for like an hour and gave up. I had no idea that could be backwards. You're the man!
I’m glad it was a common mistake for everyone and that it could help you… and that I’m not just a fool ;)
Came here because my bench wouldn’t go flat…glad to see I wasn’t alone. Thanks for the video! I was scratching my head for the last 30 minutes wondering what the heck was going on. I could’ve swore that piece could go on two ways. But yep, youre correct. One way only.
Thanks for pointing out the seat hinge. After watching your video and just looking at the direction I was able to build the bench in less than 30 minutes.
You are very welcome, the one true tricky part!
Great job, I have to put mine together before Christmas and by far yours was the best video. Thank you
Just got my bench and want to say thanks--it was a helpful check on the instructions--feels so solid
Awesome, glad it helped out, that's why I did it :)
Thank you! My bench came with a package inside labeled "Fold Back Rack Stringer Hardware Kit" and although it also contained another package with the needed parts for the bench.. no bench assembly instructions. The Fold Back Rack Stringer instructions and hardware were not helpful. Your video was very helpful, not sure I could have assembled it correctly without it.
Thank you
Thank you so much for taking the time to help others with a very informative video!
You are very welcome, happy to help
Nice! Got to see a lot of details o wouldn’t have seen otherwise and actually helped in my shopping decision. Glad to see they improved their packaging and assy.
Happy to help
Rogue didn't send me the full instructions. So this video was very helpful. I am not handy at all and this was easy
My instructions were misprinted and unreadable. This video saved me SO much time! Thanks!
Thanks for the helpful video, putting my bench together was less stressful after watching you.
Happy to help!
You saved me hours on a precious Saturday! Gratitude dude! 🙏🏽
Happy to help
They sent the wrong directions so I struggled at first but found this video thank you
Video very helpful. I likely would have gotten lucky or screwed up where you did. Thank you!
Damn I really want this bench. The stainless steel accents look great, may very well be Rogues best bench so far!
the 2.0 isn't as nice looking, but it's a waaaaaaaay sturdier and better bench!
Thanks so much for this video, I made the same mistake and was scratching my head man! Darn bench wouldn’t go flat.
Glad it helped!
Thank you, this video was very helpful!
For someone who is bisually impaired, this shit helps me so much!
Thanks a ton my dude love the channel
Thank you so much brother! Your video was a life saver!
You are very welcome… glad it helped
Thanks for the info! Subbed awhile back I knew your video would come out on top!
Thanks, I appreciate that 💪🏻🤘
Thanks so much man! This was so easy to set up with your instructions! Appreciate it!
You are welcome… Patrick ;)
They just came out with a new USA grippy pad excited to get it with mine
🤞the ala carte option is available soon!
Love the warning at the 5 minute mark😂 Nice work!
Thanks man , it was really helpful. 👍🏽
Great video! I laughed so much! Thanks!
This video was helpful!
I'm so glad!
Nice video - thank you!
Quite incredible because no one does a real-time assembly. Great share! 💯💯💯
Thank you, I appreciate that!
Thanks, helpful video. I was thrown off with the bolt that was already put through the spine part. So weird they did that.
Lol the Coop Gym Reviews was a nice jab.
Exactly why I haven’t made one yet… just be repetitive… Damn him!
Super helpful!
Hello champion!
What is the measurement of the screw of the articulation axis and the rest of the screws please? 🙏🏻🙏🏻
greetings from south america
Blessings
a hug.💪🏻
Thanks!
You are very welcome… glad to see I wasn’t the only one!
This video was really helpful. The instructions Rogue provided are awful. The images are too small and the writing is microscopic. Two things that gave me trouble were the bench hinge (the part he reversed halfway through the vid) and the wheel spacers. I struggled with the spacers and ended up using thin strips of painters tape to hold them in place. It was super easy this way - took seconds. The tape came out really easy after the bolt was through. I also ended up with an extra long bolt, and, in my case, two brass spacers. Although my bench isn’t fully assembled (see below), the back wobbles quite a bit in the upright position (all spacers are in place). Not a big deal to me. Just letting others know about it.
I have the new textured pad, but can’t say much about its performance. There were a lot of issues with the shipment of my bench. First, the pad and mounting hardware were lost by the shipper. Then, the shipment of the replacement parts was delayed at Rogue. Finally, having all of the boxes, I went to assemble it only to learn the seat support and two of the bolts needed to attach the seat/back to the bench. There were also some chips in the powder coat. The damage is under the back part. So, not visible when the bench is sitting flat on the ground, but if I stand the bench up for storage they are readily seen.
Honestly, it has not been an even remotely good purchasing experience for me. Customer service is, as expected, very professional and they are trying to help me. But, it has been a long process and leaves me thinking about purchasing other equipment from a different manufacturer.
Super helpful! I didn’t fully tighten the bolt that acts as the hinge for the seat, otherwise it won’t move. Is that correct move?
I hope i don’t regret not getting the stainless ladder guard!
Appreciate that, I didn’t want to read the instructions 😂😂😂
Are you sure this isn't just Coop wearing a hat? I had that extra bolt too, odd. I'm waiting for someone to get their hands on that new pad!
You got me man… it’s coop… I’ve been hitting the weights and got my diet on track… haven’t shaved in a bit either ;)
Btw watched your bench vid… great job… love your editing skills… all I could think was how does this dude have the time to do all this… I’d have to quit the 9-5 to accomplish that!
I contacted rogue… they said they will sell ala carte in the next couple weeks
@@CurlsintheRack same thing they told me. Looks like it'll be 2 months or so before we get to see it
@@CurlsintheRack oh it's actually pretty easy, just sacrifice literally everything in your life that's fun. Also thanks and your disguise wasn't that good Coop
So can I ask why did you buy the premium build one? Is there really a difference?
I also built mine witht he y frame piece backwards
Thanks for this very helpful vid. I’m looking forward to getting started but I have no idea what you did when you flipped the piece around at 20:50. Please let us know exactly what the error was. It looks like you just flipped the y piece around and, looking at mine, turning it doesn’t appear to affect the other pieces at all. How does one orient it correctly from the beginning? Thanks for any specifics in advance. Truly appreciated.
Check that. 17:14
Got that piece correct from watching this video and mine still doesn’t sit flat!
did have to return the 2 bench
i too had a duplicate long bolt with bushings.
they could probably save 50 bucks in hardware if they just verify they put the right amount in lol
Well done. I’ll trade you benches. 😎
I’m sure you will 🤣
21:30 3 nylon nuts for the main seat hinge and the 2 ladders
Cual es la diferencia 3.0 vs 3.1
Hi there. At the 20:50 I am having troubles. The smaller piece does not fit into the inside of long adjustable piece. You seem to put yours in with ease. Could mine be defective? I cannot get past this step due to this. The width of the smaller piece is 5.5inches and the space it must go into is only 5 3/8 inches, therefore wont fit. This is heavy gauge metal so I cant even force it in if I wanted to.
It should fit in with no problem… do your pieces looked damaged/bent?
@@CurlsintheRack they dont look damaged and bent. Thats the weird thing. They simply dont fit. It sucks. Ill have to contact Rogue
I need help with this
Email me with what you need help with and I'll try my best
Did the exact same thing - and thought it was defective…
Been ordering from Titan, long before ordering or being able to afford Rogue equipment. Never really had an issue with their packaging protection, though I have seen horror stories of Titans packaging online. Rogue on the other hand; I feel as if people don't like to admit it, but Rogue sucks BALLS at packaging protection and their QC has gone nearly out the window. Every Rogue product I've purchased has either come to be partially opened or with little to no packaging protection. Love Rogue equipment, but, fuck Rogue.
While it's not rocket science to put together a bench or track 3.... Many might be buying their first... Inn are never of US workers rather how 2 guys who've done it 20x before... Sahana there's no such service
Had to watch this video to realize I skipped a step… $600 bench and they can’t afford to staple the instructions. Go figure
Metal staples are expensive right now 😜