Yeah. The ONLY slight issue this channel has is that the videos tend to be 30+ minutes long. A lot of youngsters today have the attention span of a goldfish, so the folks that could most use a bit of old school educating might have clicked away onto something else 5 minutes in.
I don’t know if people realize how good you are at this. Very informative, multiple lifetimes of information. I can’t stress enough how difficult this is, and how easy you make it look. Wish this was around a couple years ago when I started my project!
UA-cam recommended one of your hard-top videos a week ago. Your build series has caused me to binge watch the entirety of your build series. Everyone has fishing videos online. Your build series is unique and has made your channel awesome. Keep it up!
Really love these long full-time videos. Keep those just as long as needed to show the whole time-to-process! Appreciate you can 'tell-what-you-do' while the video goes on. This way we can concentrate and actually understand and remember the action! Thank you from Europe. Very good instructive channel.
Joe, I am an industrial engineer with more than 30 yrs of experience. Your work is TOP NOTCH! You are like watching Fred Astaire dancing around your shop! No wasted motions at all! Not only no lost motions, but your pace rate is very consistent throughout all your videos! After your videos you must be quite tired! Thank you! for your content and instruction!!!
Can’t imagine a better way to celebrate your family’s legacy than share this information and knowledge with us all. Your dad and grandfather would be very proud!
I've got at least 20 hours boat shop experience because of you, boss man!!! Feels like a day at work with you. Very few edits. Long, live demonstrations. I'm just a boat owner but I like to watch these videos and dream about what I can do to my boat with this information....keep up the good work
Add my vote for continuing to show the full process. These videos are some of the best and most informative I've seen on working with fiberglass. Thanks for sharing your knowledge and expertise!
We may do that in the future, but remember that you can take alot of the methods we are using in this series and apply it to building a one time part. Thanks for watching
Haha, sometimes you just have to move forwards with a project, no matter what the conditions! Just work faster, right! Thanks for watching and commenting!
That top is built stronger than most boat hulls. It should perform worry free even in rough seas. I like the length as well. It should create some welcome shade out on the water. So you are going to gelcoat over the CSM finish, with no faring. If the rest of your boat is gelcoat over CSM then why not. You did such a nice job on that last CSM layup that it should look great and more importantly, consistent across its entire surface. Great job, and also a great job by your camera man. You make a good team.... Are you going to fabricate the support for the top? Keep the great videos coming our way.... Joe
Thanks so much, I appreciate your support of the channel! Yep, I think the hardtop will be plenty strong. I will be doing some fairing over the csm, just to give it a little nicer finish. I had planned on having another shop build the aluminum supports for us, but we will see.
Love seeing the detail and step by step work. I have some fiberglass work in my future and this makes me comfortable with the process. All your expert experience and tips are really helpful. Much better than the channels where they just skip over the tedious parts and make it look "easy"...
Capt Joe Fish bump family still hooked on these videos every video keeps getting better appreciate your attention to detail also this may seem like a small thing but the mixing of vinyl Ester putty and things of like manner really help me with the bonding structural work to save time and money Thank y'all for all you share and do!
Boatworks University! You can't get this amazing detailed content/information about fiberglass and boat related built anywhere, I am so appreciative for you guys sharing...excellent as usual.
Wow. I have watched this build from the beginning. You are a great teacher. The things I have learned make me wish I could have seen this so much earlier ... Thank you!
Hey, Capt. excellent video, your years of boat-building experience is second to none! great stuff and I saved myself $30.27 at the fiberglass warehouse with your code! what a deal! Thank you.
I hope you make more than one of these for all the time and materials involved. A one off T top can be achieved during the plug making process with dimensions. Great show Joe and FishBump Crew!
Yes, we plan on making more than just this one for sure. But many people are curious about the mold building process and I wanted this to be a legit tutorial on how to do it start to finish. It made sense to document it since I was doing it anyway. Thanks for watching!
My Dad and I built a 50' Norm Cross Trimaran in the 70's, he had a trim basket for all the trim scraps. We would then use it to fill large voids...cheaper than buying 10lbs of micro!
I ve taken on a engine hatch project thanks to your videos. The weather here in Arizona barley gets below mid 90s overnight. I been using a cooler chest to cool my resines and bondo. Seems to buy me more working time. Thank you for all the advise on doing things the right way.
Glad you are enjoying the hardtop build series! I hope these videos inspire some folks out there to build or restore something with what they are learning on the channel. I do appreciate you watching and commenting!
What a pleasure to see you working, it's almost like a ballet, no unnecessary movements and in the same time you take time to explain! It seems so easy but don't get me wrong 40 years of practice make a huge difference for sure!!! The holes in the foam core help the air to escape but act too as "rivets" with the resin removal (I'm not sure that's the correct term...🙄). Waoh you put some serious material in it but I'm sure that after your fishing campaign you can use it as a dance floor to celebrate the moment! 😀 Thks for the trick concerning the double pair of gloves 😉 that is why it is important to see your video from start to finish, always something to learn...
You are amazing! Being able to complete this work in crazy hot temperatures after a day of fishing which I'm sure started early is incredible. Really enjoy your channel and this project and I'm not a fiberglass guy. At least not yet!!
Another excellent video Captain Joe. Once again you make everything look deceptively easy! 😂 You might need to hold up two hands and a foot for episode 11 .... 😂 I don't know about anyone else, but I tend to watch your videos over and over. Thanks also for making the point that if you wait more than a couple of days between layers when using a laminating resin, you need to rough up the surface prior to adding the next layer. This is important information for a project I'll be starting soon. I intend to wait no more than a day between layers so that I don't have to rough up the surface. I had no idea that you were going to add a foam core. It makes a lot of sense now providing stiffness without excessive weight. A couple of weeks ago I cut a 2-1/16" hole in my console for a TH-Marine jack plate gauge, and when I looked at the plug which was about 3/8" thick, there was some type of thin core sandwiched between layers of glass and gel coat. I wish I could post a photo to get your expert analysis. Regardless, I'm still wondering how you're going to attach the top to the tower. I would imagine you'll be using some kind of anchors or inserts in the top so really looking forward to seeing what's next. I realize that you're very busy but I can't wait to see the rest of the videos in this series. 😊
I found that when mixing the fiberglass warehouse vinylester resin when you add the mekp to the resin you get a great color change from purple to root beer when it's well mixed.
In the off season you should have a class with hands on experience obviously for coin of course, would be a great reason to leave the cold, for warmth of the south to attend
Hi, Mr. Joe, in one of the previous videos about the gelcoat I asked you why the gelcoat did not dry, and you told me that it was most likely missing a catalyst, well today I am writing to tell you that that was the problem, Thank you very much for your advice and help, greetings from Louisiana
I"m so excited when these videos come out! Always impatiently waiting for the next one! lol, I know you say to always finish with CSM for a better cosmetic finish. But to me it looks like the 1708 is smoother in its finish than the CSM.. maybe it's just the video
Mate I heard you talking about the cheaper foam core alternative, I tried it and the resin just melted the foam .. outstanding work mate- from Australia.
Yes, some foams can work just fine with the right resins,others might react violently! I made a video about a month ago titled how to fiberglass over boat foam, and it goes into detail about different foam and resin compatability. I think you might enjoy it! Thanks for watching all of the way from Amazing Australia 🇦🇺!
Hi when are you doing another top without the mold ? I need to do one and it would be great to learn from you ilove your work and your easy to learn from
I don't think I will be building a mold less hardtop any time soon. Sorry! But I have several other projects planned that should give you some ideas. Thanks for watching
You mentioned you enjoy working in the cool months, What is your max humidity when working during the rainy months? For polyester and vinyl ester? Really appreciate all the informative content! Love the long form too.
The cooler temperatures are just more enjoyable to work in and give you a longer working time with these materials. But we routinely work in 90 plus percent humidity during the summer months. I don't prefer it, but it can be done. Thanks for watching!
I am not sure I would call a vinyl ester resin, 1708 biaxial glass and Airex foam core resulting in a sub 73 lb custom hardtop old school. I would call it practical and repeatable for the average DIYer though! Do worry, I will be showing vacuum bagging techniques as the channel moves forward. Thanks for watching
Joe, very well done! I enjoy all your videos. You mentioned some tests on a barrier coat product for epoxy and gelcoat, etc. Would you be willing to video the product testing? I was also wondering if you ever used vacuum bagging a show on that would be fantastic. Thanks again from Andrew a serious boat nut from Nova Scotia, Canada.
loving it man, i have been looking at my hard top and it was basically bolted on where a soft top used to be. Are you going to be adding some type of reinforcement areas where you are going to mount this? I am looking forward to the next videos to see how you handle this
You could probably use peel ply before you put the bricks on the foam as a hold down to protect the surface from sticking to the bricks and dirt and debris, and you can reuse it for other projects as well to protect tacky surfaces from dust and bugs.
I've seen a lot of very good videos on fiber glassing and a few not so good. I like yours the best, so I'm asking about a project I need to do. Can you show me how you would install a bow thruster from start to finish? Thanks.
have you modeled the 29 in any CAD software? if not i honestly believe you would have a blast with it. you have several options to reverse engineer your boat if you do not have it digitized. from personal 3d scanners to commercial 3d scanning services. or by taking many measurements manually. i can't stress enough the design and manufacturing freedom and power 3d models give you. youve invested a ton of money into the tooling for that bad ass boat, with a digitized boat you can constantly redesign it for no cost except your time at the computer, most softwares let you define the material you're using to compute weight, services / softwares are available to test hydro dynamics, bend / crush, etc. i recently used a free 3d analysis program to test some 3d printed wheels before i started the 48hr print, made me feel better knowing how much they would deflect under load. id like to see you take full advantage of that beautiful hull and offer the 29 cc as a dc pilot house, maybe a pilot house with fly bridge... you build a great boat, offering different styles without re tooling the hull just makes sense. and one other great reason for a digital boat...3 axis plywood routers are cheaper than ever, seeing them on fb marketplace for 1-2k. you can send your new idea over to the router to cut your stations for building plugs. like one of those balsa wood dinosaur models. like always, great video man!
Your skills are on point! Truly appreciate what you and the cameraman are doing for the YT community. By the way, I realize that the rollers are throw-away items; however, do your roller handles clean up with acetone well? Thanks
Happy to hear that you appreciate the work that we are putting into the videos and that they are helpful! Yes, in most cases you can reuse the roller frames, as long as you don't let the resin or gelcoat start to cure before knocking them off. Then I use a 5 gallon bucket with about 1 to 2 gallons of acetone to clean them. I will be doing a video soon on this topic, so stay tuned!
Thanks! We source the Red dye from our local fiberglass supplier. It is not the same as a food grade dye. I will try to find some more info on the mekp dye for you all. I appreciate you watching!
Great video!!!! I’m also making a hard top.. I have question in regard to mounting the hardtop to my existing fishmaster aluminum T Top frame. Will tapped holes with machine stainless screws be ok or can I use stainless tapping screws with rubber washer kinda like ridding sheet metal screws but stainless.. just wanted to get input ? The t top 60inWide x 80inch long?
Thanks, glad you are enjoying the videos! I personally like to through bolt from the bottom to the top, then use acorn nuts with fender washers on top. This has worked well for me in the past.
Thx for the content Just a question I’ve got a boat project and was thinking on making a transom extension bracket and swim plate on the transom of my 15.5ft Larson. My question is Is that recommended, if so is there a certain way you would do it
Awesome channel, thanks for all the information that is helping me formulate my plan for a foam micro camper. I have two questions: I am limited to using box store foam like NGX. I want to glass that over for an outer shell. Which resin would allow me to coat the panels with 1708, let it cure, cut the panels into a complex shape, then continue with and additional layer of CSM over top the structure. I understand the foam can melt and that epoxy is good, but I also understand that epoxy isn't as good as a laminating resin. Is there one resin that will not melt foam but also laminate? Second question: I am going for a flat finish. After I put the final CSM layer on as the outer shell, how do I get to flat finish? Add a 3 oz finishing cloth, or use a filler and sanding to get to flat finish? Or both? Thanks.
What part of Alaska are you in? I know Fiberlay has a location in Anchorage. They might have PVC foam sheets there. If you need to use EPS foam, you will need to use epoxy. Epoxy laminating resin is actually stronger than polyester. It is just more expensive and not as forgiving and you can't use gel coat with it.
@@fiberglassguru Palmer AK. My use case is I need very thick walls and from what I can tell the PVC foam is pricey compared EPS. I'll give Fiberlay a call, thanks for the tip.
No, I don't have the aluminum pipework yet. I am considering building it, but I may have a local fab shop do the work. Just trying to balance out time and money on that part of the project. Either way, I will be showing you all how it's done. So stay tuned and thanks for watching!
I blame my dad for me being a gearhead, tinkerer. Went to honors night in Highschool for woodshop and my best buddy for metal shop! not Math..lol Buddy can make anything out of metal and has been his career since he was 14. He also learned from his dad! I can build just about anything but it takes a long time, ask my wife! Something to think about with the trades: My buddy who can do trigonometry and can ramble off the size of any number drill in SAE, metric or a fraction can't spell worth a rip, and has a hard time writing a sentence. He is dyslexic! In the 80's he was pushed through school to graduate and absolutely hated it except for metal shop and related classes. You are making Mike Rowe Proud, except you don't get dirty! Hell he probably fished on one of your boats doing one of his episodes! We need hands on shop classes back whether you end up in the trades or not! Working with your hands, using your brain is a huge deal. Keep up the long format, this stuff is so much better than ANY network TV! I have a 32 Bayliner MY, with diesels I have owned for 27 years. You motivated me to cut a hole in the cabin floor for "Cave" access. Figure I can always just fix with glass and resin..lol I am however going to fabricate a hardtop extension over the cockpit. Common addition but huge money to purchase as well as a hull extension, another common but no longer made. Keep up the great work and safe fishing!
This channel is what UA-cam should be.
I agree. I taught myself how to use Solidworks CAD system from youtube.
Wow, thank you so much!
1000%
Yeah. The ONLY slight issue this channel has is that the videos tend to be 30+ minutes long. A lot of youngsters today have the attention span of a goldfish, so the folks that could most use a bit of old school educating might have clicked away onto something else 5 minutes in.
I don’t know if people realize how good you are at this. Very informative, multiple lifetimes of information. I can’t stress enough how difficult this is, and how easy you make it look.
Wish this was around a couple years ago when I started my project!
Wow,Thank you very much! Happy to share what our family knows about fiberglass and boatbuilding with you all, and I am glad that it is appreciated!
UA-cam recommended one of your hard-top videos a week ago. Your build series has caused me to binge watch the entirety of your build series. Everyone has fishing videos online. Your build series is unique and has made your channel awesome. Keep it up!
Really love these long full-time videos. Keep those just as long as needed to show the whole time-to-process! Appreciate you can 'tell-what-you-do' while the video goes on. This way we can concentrate and actually understand and remember the action! Thank you from Europe. Very good instructive channel.
Glad you are enjoying our video style and I appreciate you watching all of the way from Europe!
Props to the cameraman as well. Gets every bit of detail without making us seasick, and seems to be staying out of the way.
Great job, all!
Thanks for the compliment! I will be sure to tell him!
It's perfectly OK for the camera person to actually have a name.
Joe, I am an industrial engineer with more than 30 yrs of experience. Your work is TOP NOTCH! You are like watching Fred Astaire dancing around your shop! No wasted motions at all! Not only no lost motions, but your pace rate is very consistent throughout all your videos! After your videos you must be quite tired!
Thank you! for your content and instruction!!!
Can’t imagine a better way to celebrate your family’s legacy than share this information and knowledge with us all. Your dad and grandfather would be very proud!
I've got at least 20 hours boat shop experience because of you, boss man!!! Feels like a day at work with you. Very few edits. Long, live demonstrations. I'm just a boat owner but I like to watch these videos and dream about what I can do to my boat with this information....keep up the good work
Outstanding! Glad you are enjoying our videos!
I am so glad I found your channel a few months ago. It feels like a hands on shop class with a great teacher .
Add my vote for continuing to show the full process. These videos are some of the best and most informative I've seen on working with fiberglass. Thanks for sharing your knowledge and expertise!
Would love to see a video of a one and done hardtop. I am trying to plan out making one for my 26 Seaway
We may do that in the future, but remember that you can take alot of the methods we are using in this series and apply it to building a one time part. Thanks for watching
Very brave working fiberglass resins in such high heat. Brylcream a little dab will do ya! Hair cream nourishes hair.
Haha, sometimes you just have to move forwards with a project, no matter what the conditions! Just work faster, right! Thanks for watching and commenting!
That top is built stronger than most boat hulls. It should perform worry free even in rough seas. I like the length as well. It should create some welcome shade out on the water. So you are going to gelcoat over the CSM finish, with no faring. If the rest of your boat is gelcoat over CSM then why not. You did such a nice job on that last CSM layup that it should look great and more importantly, consistent across its entire surface. Great job, and also a great job by your camera man. You make a good team....
Are you going to fabricate the support for the top?
Keep the great videos coming our way.... Joe
Thanks so much, I appreciate your support of the channel! Yep, I think the hardtop will be plenty strong. I will be doing some fairing over the csm, just to give it a little nicer finish. I had planned on having another shop build the aluminum supports for us, but we will see.
Love seeing the detail and step by step work. I have some fiberglass work in my future and this makes me comfortable with the process. All your expert experience and tips are really helpful. Much better than the channels where they just skip over the tedious parts and make it look "easy"...
Thanks for you feedback! Glad you are enjoying the long format, high detail videos!
You should create merchandise with that 'blob, blob, blob' sound from mixing printed on them! That is amazing expertise and craftsmanship on the part
Hahaha, who knows, maybe we will! Thanks for watching!
Capt Joe Fish bump family still hooked on these videos every video keeps getting better appreciate your attention to detail also this may seem like a small thing but the mixing of vinyl Ester putty and things of like manner really help me with the bonding structural work to save time and money Thank y'all for all you share and do!
Glad you are enjoying the videos and I truly appreciate your continued support of the channel and the work we are doing!
Boatworks University! You can't get this amazing detailed content/information about fiberglass and boat related built anywhere, I am so appreciative for you guys sharing...excellent as usual.
Wow! What a nice compliment! Much appreciated
I love how you are dressed for the beach but going to work. Thats awesome.
Wow. I have watched this build from the beginning. You are a great teacher. The things I have learned make me wish I could have seen this so much earlier ... Thank you!
Thanks so much! Glad it was helpful!
Thanks Captain Joe and the team for your time and sharing your experience, really enjoying the Hard top series 👍🇦🇺
Thank you Dave! Your support and encouragement of the channel is what helps us keep going!
What I like most is your experience shines through what you do and say. Thank you for sharing with us!
You are so welcome! Thanks for the comment!
Brylcream hair cream a little dab ‘l do ya! Back in the day when I had hair I used it! Dang bro I wish I had your energy level! Great job Logan!🙏🙏🙏
Haha, I hear ya man! Glad you are enjoying the videos, and I will be sure to tell Logan that you said he does a good job!
Hey, Capt. excellent video, your years of boat-building experience is second to none! great stuff and I saved myself $30.27 at the fiberglass warehouse with your code! what a deal! Thank you.
I hope you make more than one of these for all the time and materials involved. A one off T top can be achieved during the plug making process with dimensions. Great show Joe and FishBump Crew!
Yes, we plan on making more than just this one for sure. But many people are curious about the mold building process and I wanted this to be a legit tutorial on how to do it start to finish. It made sense to document it since I was doing it anyway. Thanks for watching!
I do like watching the FULL process. That’s how you learn!
Another Great video! Love all the details! Thank you for sharing time and many talents! All the best…. Chuck
Thanks a bunch! Appreciate ya watching
You are a great instructor, thank you.
Thanks, you are very welcome!
I love this channel! No BS. Just good instructions! Thank you.
My Dad and I built a 50' Norm Cross Trimaran in the 70's, he had a trim basket for all the trim scraps. We would then use it to fill large voids...cheaper than buying 10lbs of micro!
Interesting! Thanks for watching and commenting!
Great content as always!
All the best from California! 🧡
Thanks so much!
I ve taken on a engine hatch project thanks to your videos. The weather here in Arizona barley gets below mid 90s overnight. I been using a cooler chest to cool my resines and bondo. Seems to buy me more working time. Thank you for all the advise on doing things the right way.
Love you channel - I am almost ready to attempt a sunshade for my tractor!
Wow, thanks! Sounds like a cool project!
What a great educator you are! Always looking forward for the next session you provide. Thank you!
Wow! Thanks so much!
Maybe we need a second channel for recipes and cooking demos of the fish y'all catch?
I’m looking forward to building the structure to hold up the hard top!
Thanks for watching!
Very good... as always! Cheers from Brazil 🇧🇷
Thank you very much for watching all of the way from Brazil 🇧🇷!
Nice work! Thanks for the video.
Thanks for watching!
Thank you so much for your videos
Glad you enjoyed it, thanks for watching!
This is amazing watching you go through this process....I would love to be able to do something like this thank yo so much for sharing.....
Glad you are enjoying the hardtop build series! I hope these videos inspire some folks out there to build or restore something with what they are learning on the channel. I do appreciate you watching and commenting!
You lucked out with your family they are smart people
Thank you very much!
What a pleasure to see you working, it's almost like a ballet, no unnecessary movements and in the same time you take time to explain! It seems so easy but don't get me wrong 40 years of practice make a huge difference for sure!!! The holes in the foam core help the air to escape but act too as "rivets" with the resin removal (I'm not sure that's the correct term...🙄). Waoh you put some serious material in it but I'm sure that after your fishing campaign you can use it as a dance floor to celebrate the moment! 😀 Thks for the trick concerning the double pair of gloves 😉 that is why it is important to see your video from start to finish, always something to learn...
I Always look forward to seeing the progress. Keep up the good work Joe!!!
Thanks! Will do!
You are amazing! Being able to complete this work in crazy hot temperatures after a day of fishing which I'm sure started early is incredible. Really enjoy your channel and this project and I'm not a fiberglass guy. At least not yet!!
Wow! Thank you so much! I am glad you are enjoying the videos and I appreciate you watching.
Another excellent video Captain Joe. Once again you make everything look deceptively easy! 😂 You might need to hold up two hands and a foot for episode 11 .... 😂
I don't know about anyone else, but I tend to watch your videos over and over. Thanks also for making the point that if you wait more than a couple of days between layers when using a laminating resin, you need to rough up the surface prior to adding the next layer. This is important information for a project I'll be starting soon. I intend to wait no more than a day between layers so that I don't have to rough up the surface.
I had no idea that you were going to add a foam core. It makes a lot of sense now providing stiffness without excessive weight. A couple of weeks ago I cut a 2-1/16" hole in my console for a TH-Marine jack plate gauge, and when I looked at the plug which was about 3/8" thick, there was some type of thin core sandwiched between layers of glass and gel coat. I wish I could post a photo to get your expert analysis. Regardless, I'm still wondering how you're going to attach the top to the tower. I would imagine you'll be using some kind of anchors or inserts in the top so really looking forward to seeing what's next.
I realize that you're very busy but I can't wait to see the rest of the videos in this series. 😊
Love the show
Thank you for watching!
I appreciate your videos.
I appreciate you watching and commenting!
a lot of work but worth the extra detail put into laying up the material.
great video.
Great site Brill Cream "a little dab will do you". Thanks so much for your content!
Looking great so far. I can’t wait to see the next video.
Another great video, truly enjoyed it.
Thank you very much!
Another great episode love the attention to detail
Another the great educational video thank you. Look forward to the next.
As always great content and easy to follow you never hurry thanks
Thanks so much
You're welcome! Glad to help!
As usual very informative
Glad you think so!
Thanks for your thorough explanation of every step. This is incredibly helpful and I will be using your tips in building my project.
Amazing work, thank you.
Thank you too!
Great fiberglass work and great information.
I found that when mixing the fiberglass warehouse vinylester resin when you add the mekp to the resin you get a great color change from purple to root beer when it's well mixed.
In the off season you should have a class with hands on experience obviously for coin of course, would be a great reason to leave the cold, for warmth of the south to attend
Thanks for the suggestion! That might be something we would consider if there was enough interest. I appreciate you watching and commenting!
very informative, thanks
Great content 👌 thank you
Hi, Mr. Joe, in one of the previous videos about the gelcoat I asked you why the gelcoat did not dry, and you told me that it was most likely missing a catalyst, well today I am writing to tell you that that was the problem, Thank you very much for your advice and help, greetings from Louisiana
Your Vid"$, R the best,you are certain to point out the most critical points"! Prop"z"
Thank you very much!
I"m so excited when these videos come out! Always impatiently waiting for the next one! lol, I know you say to always finish with CSM for a better cosmetic finish. But to me it looks like the 1708 is smoother in its finish than the CSM.. maybe it's just the video
Capt Joe
Still with you from the begging, in for the long hall.
Awesome! I appreciate your support of the channel!
Thanks for the video Joe
Another great video👍
Mate I heard you talking about the cheaper foam core alternative, I tried it and the resin just melted the foam .. outstanding work mate- from Australia.
Yes, some foams can work just fine with the right resins,others might react violently! I made a video about a month ago titled how to fiberglass over boat foam, and it goes into detail about different foam and resin compatability. I think you might enjoy it! Thanks for watching all of the way from Amazing Australia 🇦🇺!
A little dab a do ya was from a Brylcream commercial if I recall correctly.
"Brylcream a little dab will do you, watchout the girls will all pursue you"
@@daveharmon9762 I don’t recall the second part, did you make that up?
Hi when are you doing another top without the mold ? I need to do one and it would be great to learn from you ilove your work and your easy to learn from
I don't think I will be building a mold less hardtop any time soon. Sorry! But I have several other projects planned that should give you some ideas. Thanks for watching
You mentioned you enjoy working in the cool months, What is your max humidity when working during the rainy months? For polyester and vinyl ester? Really appreciate all the informative content! Love the long form too.
The cooler temperatures are just more enjoyable to work in and give you a longer working time with these materials. But we routinely work in 90 plus percent humidity during the summer months. I don't prefer it, but it can be done. Thanks for watching!
This is real old school boatbuilding , getting into vacummbagging would improve your cored construction
I am not sure I would call a vinyl ester resin, 1708 biaxial glass and Airex foam core resulting in a sub 73 lb custom hardtop old school. I would call it practical and repeatable for the average DIYer though! Do worry, I will be showing vacuum bagging techniques as the channel moves forward. Thanks for watching
Joe, very well done! I enjoy all your videos. You mentioned some tests on a barrier coat product for epoxy and gelcoat, etc. Would you be willing to video the product testing? I was also wondering if you ever used vacuum bagging a show on that would be fantastic. Thanks again from Andrew a serious boat nut from Nova Scotia, Canada.
You can use a ribbon of kevlar around the edge to make it even stonger.
Sure, there's lots of options when doing a build like this. I hope the videos inspires people to build some great projects. Thanks for watching!
Hi from Perth western Australia look forward to your videos
Can you please make a charter fishing video of one of your fishing trips
Sure, we will hopefully have some fishing videos soon for you all. Thanks for watching all of the way from Australia 🇦🇺!
"BRYLCREEM" Hari Gel, a little dab 'il do you. Popular in the 1950's, it's still availaable today.
Very cool! I didn't know they still made it! Thanks for watching and commenting!
loving it man, i have been looking at my hard top and it was basically bolted on where a soft top used to be. Are you going to be adding some type of reinforcement areas where you are going to mount this? I am looking forward to the next videos to see how you handle this
You could probably use peel ply before you put the bricks on the foam as a hold down to protect the surface from sticking to the bricks and dirt and debris, and you can reuse it for other projects as well to protect tacky surfaces from dust and bugs.
Sure, you could do that if you have some extra peel ply laying around. Thanks for watching
Hi iam amazed with the boat I watched from the first episode from till now iam wonder if there is any build plan for the boat hull mould
I've seen a lot of very good videos on fiber glassing and a few not so good. I like yours the best, so I'm asking about a project I need to do. Can you show me how you would install a bow thruster from start to finish? Thanks.
Brylcreem---A Little Dab'll Do Ya!, 1955
Haha, awesome! You got it! Thanks for your comment
have you modeled the 29 in any CAD software? if not i honestly believe you would have a blast with it. you have several options to reverse engineer your boat if you do not have it digitized. from personal 3d scanners to commercial 3d scanning services. or by taking many measurements manually. i can't stress enough the design and manufacturing freedom and power 3d models give you. youve invested a ton of money into the tooling for that bad ass boat, with a digitized boat you can constantly redesign it for no cost except your time at the computer, most softwares let you define the material you're using to compute weight, services / softwares are available to test hydro dynamics, bend / crush, etc. i recently used a free 3d analysis program to test some 3d printed wheels before i started the 48hr print, made me feel better knowing how much they would deflect under load. id like to see you take full advantage of that beautiful hull and offer the 29 cc as a dc pilot house, maybe a pilot house with fly bridge... you build a great boat, offering different styles without re tooling the hull just makes sense. and one other great reason for a digital boat...3 axis plywood routers are cheaper than ever, seeing them on fb marketplace for 1-2k. you can send your new idea over to the router to cut your stations for building plugs. like one of those balsa wood dinosaur models. like always, great video man!
Your skills are on point! Truly appreciate what you and the cameraman are doing for the YT community. By the way, I realize that the rollers are throw-away items; however, do your roller handles clean up with acetone well? Thanks
Happy to hear that you appreciate the work that we are putting into the videos and that they are helpful! Yes, in most cases you can reuse the roller frames, as long as you don't let the resin or gelcoat start to cure before knocking them off. Then I use a 5 gallon bucket with about 1 to 2 gallons of acetone to clean them. I will be doing a video soon on this topic, so stay tuned!
@@FishBumpTV Many thanks for the advice!
Brylcreem, that's the product where,"a little dab will do ya" came from,
Ahh, good to know! I always wondered where my Dad got that saying. Thanks
i wait for the new vids like i used wo wait for tgif each week, amazing channel!!
Great videa. What dye do you put into the MEKP
Thanks! We source the Red dye from our local fiberglass supplier. It is not the same as a food grade dye. I will try to find some more info on the mekp dye for you all. I appreciate you watching!
Great video!!!! I’m also making a hard top.. I have question in regard to mounting the hardtop to my existing fishmaster aluminum T Top frame. Will tapped holes with machine stainless screws be ok or can I use stainless tapping screws with rubber washer kinda like ridding sheet metal screws but stainless.. just wanted to get input ? The t top 60inWide x 80inch long?
Thanks, glad you are enjoying the videos! I personally like to through bolt from the bottom to the top, then use acorn nuts with fender washers on top. This has worked well for me in the past.
“Brylcream, a dab’ll do ya” it was hair tonic to keep your fresh comed look.
Ahh, gotcha! Thanks for watching and commenting!
@@FishBumpTV love your work reminds me of the 80’s when I worked at Glasstream.
It would be amazing if you can show us how to build a fuel tank or water tank so that we can know what kind of epoxies are appropriate for each.
Thx for the content
Just a question
I’ve got a boat project and was thinking on making a transom extension bracket and swim plate on the transom of my 15.5ft Larson.
My question is
Is that recommended, if so is there a certain way you would do it
Awesome channel, thanks for all the information that is helping me formulate my plan for a foam micro camper. I have two questions: I am limited to using box store foam like NGX. I want to glass that over for an outer shell. Which resin would allow me to coat the panels with 1708, let it cure, cut the panels into a complex shape, then continue with and additional layer of CSM over top the structure. I understand the foam can melt and that epoxy is good, but I also understand that epoxy isn't as good as a laminating resin. Is there one resin that will not melt foam but also laminate? Second question: I am going for a flat finish. After I put the final CSM layer on as the outer shell, how do I get to flat finish? Add a 3 oz finishing cloth, or use a filler and sanding to get to flat finish? Or both? Thanks.
What part of Alaska are you in? I know Fiberlay has a location in Anchorage. They might have PVC foam sheets there. If you need to use EPS foam, you will need to use epoxy. Epoxy laminating resin is actually stronger than polyester. It is just more expensive and not as forgiving and you can't use gel coat with it.
@@fiberglassguru Palmer AK. My use case is I need very thick walls and from what I can tell the PVC foam is pricey compared EPS. I'll give Fiberlay a call, thanks for the tip.
Could you do a cost breakdown for the boat plus the top?
Joe do you have the tops support. I dont know what its called? Usually aluminum tubing? Did you buy it ?
No, I don't have the aluminum pipework yet. I am considering building it, but I may have a local fab shop do the work. Just trying to balance out time and money on that part of the project. Either way, I will be showing you all how it's done. So stay tuned and thanks for watching!
I blame my dad for me being a gearhead, tinkerer. Went to honors night in Highschool for woodshop and my best buddy for metal shop! not Math..lol Buddy can make anything out of metal and has been his career since he was 14. He also learned from his dad! I can build just about anything but it takes a long time, ask my wife!
Something to think about with the trades: My buddy who can do trigonometry and can ramble off the size of any number drill in SAE, metric or a fraction can't spell worth a rip, and has a hard time writing a sentence. He is dyslexic! In the 80's he was pushed through school to graduate and absolutely hated it except for metal shop and related classes. You are making Mike Rowe Proud, except you don't get dirty! Hell he probably fished on one of your boats doing one of his episodes!
We need hands on shop classes back whether you end up in the trades or not! Working with your hands, using your brain is a huge deal.
Keep up the long format, this stuff is so much better than ANY network TV! I have a 32 Bayliner MY, with diesels I have owned for 27 years. You motivated me to cut a hole in the cabin floor for "Cave" access. Figure I can always just fix with glass and resin..lol I am however going to fabricate a hardtop extension over the cockpit. Common addition but huge money to purchase as well as a hull extension, another common but no longer made.
Keep up the great work and safe fishing!
Have you thought of any drone boat or subs designs?
Bob Ross of boat building
I wonder if you could vacuum bag it and get better contact between the layers?
Hey, I forgot forget but I might’ve asked you. What did you do with the plug you made for the hull?
Would like to know the cost of materials when your done with top from start making mold to finish.
I will try to put something together for you all once the hardtop is complete. Thanks for watching!