I know this is a 2 year old video at this point, but I had to comment on this one. You had me cracking up throughout this video. Thank you for all of the wisdom and comedic value that you bestow on us, Uncle Doug.
It’s true, the corny jokes and bringing in the pets as characters makes the content so much easier to engage with and endears the audience. I feel like I had a couple of elementary school teachers that did the same kind of stuff and they were my favorites and helped us the most.
Awww, here's to Rusty! May he always get the squeeker, play with the best tennis ball, and may his treats cache be filled with good boy goodies! He was your best worker! 😂
I’m so blessed that I had one amp repaired by Uncle Doug and I’m sure the owner of this amp is a very happy camper since this was just a typical repair for the Master ! 👍
Meticulous attention to details was demonstrated here. That's why I love your repair videos Uncle Doug. That and the sarcasm sprinkled within the video. Mitzi is looking well. Shop mice visiting don't stand a chance.
So sad to hear about Rusty! I hope you are doing better now. I have lost many pets over the years and it’s something that does not really fully heal. I’m sure Rusty is playing with all the good boys and girls!
In 1963 my dad boùght me a Fender (pre CBS) Jaguar and Bandmaster amp. I started a band and put myself through school with the money I made. I still have them both. Fond memories of those days. Shalom/gw PS I quit the band when I got married. I've played in churches ever since. ;-)) Happy Easter!
You (and Ted Woodford) are true inspirations. This is some of the best and most informative guitar content on youtube, and the personalities, human and otherwise, couldn't be more warm and genuine and engaging. Thanks for showing us all how it's done, Uncle Doug :)
This channel teached me more in one video than 4 years of electrical engineering school. This should be a mandatory watch when learning basics of electrical engineering.
Saw this just in time for my morning coffee. Magnificent. I used to have a bandmaster ( Actually 2 different ones) and a tremolux. Kicking myself now for selling them but at the time I must have thought it was necessary. Thank you Doug. Your videos are just wonderful. I've learned so much from you.
The prospect of a hot shop and UD working in his tighty-whities fully supports your “no filming the presenter” policy. Another great video Doug! Thanks.
@@UncleDoug Fun fact UD... The Gentleman on Tool Time that was only exposed from the nose up was nekkid from the chest down... My awnt was on set and passed out with the vapors. Makes ya wonder. Great video and cheers from the dessert! ;)
@@UncleDoug , I have attacks of the "vapors" fairly regularly, too my wife's consternation, but those are mostly sound and fury that signify nothing. But when our little terrier gets the vapors, however, the best course of action is to run for the hills! You know, it's funny, we have had cats in the past, and I don't remember the cats ever passing gas. They were outside cats however and they did their business in the woods, which was great because we didn't have to deal with a stinky litter box.
Doug. I started rebuilding old Ampegs a bunch of years back, then went off kilter and bought a salvage '74 Twin. At that point I started watching your vids. Great stuff! I am now building amps and I understand just about what every comonent does and why. You are a great teacher. You are the Walter White of Amps. You are the "One Who Knocks"!
Old School Army tech here, and I love it, Uncle Doug! I had my US Army Basic Electronics Training at Ft. Gordon GA in 1978. My MOS was 32-H "Fixed Station Radio Repairer", and the training was very heavily about Vacuum Tube theory and operation. Vacuum tubes were on their way out in most areas, but not in Radio. You can't get high power transmission (10KW-20KW) out of transistors, not even close. So we were taught all about vacuum tubes and the associated circuits. After ten years of military service, I was medically retired (wounded in Central America) and I went to college and got my degree as an Electronics Technician initially, and I finally ended up with a BSEE. Since then I mostly have done electronics repairs, and I specialized in the restoration of antique electronics equipment and tube guitar amplifiers. I fix Solid State amps too, but I don't especially like working with them. My heart is in the old stuff with tubes. I love your channel, Uncle Doug, it is a refresher course for me watching you fix up these old guitar amplifiers. I pay close attention to you, and I pick up a lot of tips and tricks. We're all learning together in this world, and I'll be learning and teaching until I leave this remarkable world. Thank you for sharing your knowledge and expertise with us, Uncle Doug, you are doing a valuable service to the community of budding technicians and refreshing we older technicians!
Thanks so much for your wonderful message, Wade. This is the reason that I read and respond to every viewer comment.....so that I will never miss a very special one like yours. I am honored by your kind words and wish you the very best in all your endeavors.
Well, you got your classics, then you got your epics. This is epic Uncle Doug. My BF Bassman had an AA165 tube chart sticker in the cabinet. But no, it was actually the AB165 upon arrival from Ebay. Fraud? No. This was many years ago, and seller was not misleading. Thrifty Fender just used up whatever they had - stickers, chassis - you name it.
Hi Uncle Doug!! Thanks for this video. I am playing with an old tape recorder, and the explanation about leaking capacitors will be very useful. I used a variac to reform the electrolityc caps, and this will help to continue with the dignose. For now it is working, and there is no hum, but I am not sure if they are leaking, or de ESR changed. Best regards !
Electrolytics in storage will show increased DC leakage due to oxide layer deterioration, manufacturers usually recommend undertaking a re-forming procedure by application of voltage gradually increasing to nominal with current limited to about twice the nominal leakage current for an hour or so. If you read electrolytic caps data sheets carefully, somewhere there, buried will be a line mentioning, that the rubber seal is guaranteed to maintain its condition for 10 to 15 years only.
I have to say. I come here for the interesting and informative content. I stay for the amazing dry running commentary! "My phase is getting inverted just looking at this jewel" Love it. Thanks Uncle Doug.
Uncle Doug! Thank you so much for making this video...as someone aspiring to work some day as an amp builder and tech, seeing your process is incredibly insightful. I am currently finishing up my first amp build right now and have some videos up on my channel. Please do take a look and share your thoughts on my build if you can spare the time from your undoubtedly busy schedule fixing these pieces of rock 'n roll history!
@elcectroidiot This is a great hobby and rewarding pastime but trust me,,,, use your parents college money and get a science degree in engineering or something else. You don't want this as a career choice! Not unless you happen to also be a guitarist with a girlfriend you can fall back on! Otherwise you likely end up homeless! Of course you could do worse. You could waste your parents money on an Arts degree in philosophy! L.oL.!
@@southboundsuarez9832 well it started out as a hobby but having no other useful skill besides a bit of electronics knowledge leaves no choice but to monetize it somehow lol.
@@Santaji55 Hey Man welcome aboard! I am just pokin some fun at all of us. Don't take me too seriously,,, I certainly don't. Except maybe if you actually are a philosophy major. In that case I completely understand. But seriously, we all gotta get our hustle on, one way or another, With the whacky inflation the way it is, we do what we gotta do! (won't get into politics) Whatever it takes to fulfill ones appetite and secure safe haven for oneself! It certainly easier to support ones self thru what one enjoys versus having to toil at something that is displeasing or disgraceful. However, there are seldom if any get rich quick ways to achieve wealth. Even crime requires much effort (plus it usually is such bad karma). It is much easier directing your attention to things that keep your interests and stuff you can't get enough of... Unfortunately even the best hobbies, leisure pursuits and greatest dreams can become very sour once that they become full on commitments and obligations that require your ability to consistently exceed expectations! For me doing this as a semi (un)-professional hobby, that is in addition to my full time high paying job has afforded me the ability to pick and choose who, when and what I want to work on. I can pretend to be a real business and take advantage of hanging out on the outside fringe of what's moving and shaking, enjoying the social aspect of belonging to somewhat of the larger bigger industry like I am an insider. I get to look over the shoulders of others and weasel my way into different circles where I can name drop! Its like being a party crasher. I am getting away at being the Biggest Poser! Its funny that as I write this, I am laughing at myself trying to describe myself, who am I and just exactly what I am doing or what I have to gain ..... Really it's a social thing for me. I have gone to alot of trouble and expense to put on a front, just so at the very end I can lay claim to getting my own NAMM show tickets! I have pretty good cred because I do good work on the stuff I like to work on and I am cheap. I pay to have business, usually a little bit more than I bring into it. My real shitty job pays for everything in my livelyhood including subsidizing this in addition to paying for several other of my expensive hobbies! This amp thing is the only hobby that helps support itself but sometimes it can get old. I pace myself as to not lose interests.
I am as old as you. Built a bass guitar and amp, started as an apprentice mechanical engineer at a gas turbine research establishment - but in the UK. Our band built everything it needed to play the music it wanted to play. A Fender Bass cost as much as a new car, so we built and built and built. We worked outside the usual musical agencies, as their primary bank appeared to be gambling machines. 6G6s were replaced by EL33s and EL34s. It was so much fun that the survivors are still reeling as to how it so quickly blew up. Do not ask us, for we have no answers. Now I have a drinking game with your sound cuts. How are the mighty fallen. (Puts down violin.) RIP Rusty. Few people deserve pets.
Thank you for the free education. I'm new to the tube amp world a few years) for about a year I've been wanting to learn how to work on them and have yet to but I've bought some tools and books and between the books and your videos I'm getting a great education. I'm about to order a kit was thinking id start with a tweed and was set on a champ but now I'm thinking maybe a Princeton. I have a 65 drri and a marshall sv20c. Thanks uncle Doug. Your videos are such a gift.
@Uncle Doug like you I'm a cat lover got two partners that have been my sidekicks since hurricane Katrina. Strange at 47 I'm just now interested in this stuff and I sure wish I'd got the bug 20 years ago but we didn't have you tube then. I'll keep watching your channel and really appreciate you soon I'll make a contribution when I get out from under a few things because your content is free but more valuable then anything else I've ever seen on you tube and your generous enough to let us watch free. You could easily charge alot so I thank you. But I'll stop distracting you. As I'm sure you have more projects
I lived in Austin for a while (you're probably in San Antone) and the humidity could reduce a freshly-ironed shirt in to a wadded-up, soaked rag in minutes. Thanks for the nice comments ;)
Wow, you mentioned magnificent 4 times in the vid opening sequence, that was half a bottle of vodka. Was seeing double! Ah! I see the logic, stereo vision without glasses. Cool, going to re-watch the vid every night this week. Awesome vid, as always.
I wish you had been my instructor in 75. One of the best trouble shooters I've had the pleasure to watch. Nothing like a tube to supply the best sound quality. I've been retired a long time. Last I knew, high power could only be accomplished with tubes. Even after 40 plus years in electronics, I'm still learning tricks from you. Great job! Thanks for the fun learning experience.
Finally I had a great reason to crack open and down my case of vintage Billy Beer. Please tell Jimmy to pray for me, I’ll be in the ER with a septic bowel obstruction. Thanks UD!
I laughed, I learned. Then, I laughed and learned even more! And I DID listen to how many times I heard the word "Magnificent". I had to pour another glass of wine to keep up my end of the challenge, LOL. Brilliant video once again!!
I am so impressed, as always.....I like the addition of Mitzi.......she's a mighty pretty kitty....and I see her inherent good taste,,,,,,WHATABURGER !!!!!......Yeah, Uncle Doug!!!! Thank you so much!!!!!...............G
I usually get the new Uncle Doug video first thing in the morning and procrastinate doing what I should be doing by getting another cup of coffee and settling down at my PC. Well this video came as I was just getting ready to make some shrimp scampi so I got a nice video and a nice dinner. Along with many jiggers of water, a Gin and Tonic would have been better but the Doc says no and Me Darling Wife watches me like a hawk. This is one of the most instructive ones Doug has done in a long time. Thanks Doug
This vid made my day. It is really hot here in the UK today and I am sat here in the garden with a cool beer watching this amazing amp being worked on! Thanks Uncle Doug 👍
spent Summer 1967 in Phoenix w/ Uncle who was in AF/Luke AFB and loved the 110 degree heat everyday!!! Do recall the refreshment truck coming curbside and making Dr Pepper from the fountain, WHAT A TREAT. Love the channel, keep up the good work.
Another great video, Uncle Doug. I used to service these Fender amps back in the 70's, and after watching your videos it shames me to think about what I didn't know back then.
Uncle Doug, Thanks for the "Magnificent" video! I would have commented sooner but I needed a couple of days to recover after movie double feature :) As always, I learn something new and have a lot of fun with your videos!
I appreciate your channel for it’s free-flowingish pace(I realize editing is necessary) and it’s candid nature. With that said, there are channels to visit that offer Nit-Picky restorations and very in depth procedure explanations. Uncle Doug has an eye for hobbyist restorations, and I’m sure he understands that we don’t all have a cabinet or shelving for our parts stock. Many of us work with what’s on hand and with knowledge passed down from excellent mentors as yourself, it’s immensely appreciated. I truly love your “magnificent” videos Uncle Doug and I hope you always stay as inviting, understanding, and courteous as you are. Stay safe and awesome U.D.
I believe that your viewers know by now that they send the best, to the best... I love your enthusiasm when you get an un-molested amp in for service. I've only seen 15 minutes of this video so far but I know it will have a stellar outcome. Thanks.
From one amp tech to another, your response to commenters in the "News Desk Update" was absolutely hilarious! I really did LOL on that one. Your explanations and delivery of detail along the way is outstanding sir. Thank you for your efforts.
Late to the party but I just want to say this was Magnificent. Edit: This was brought to you by Saint Arnold Brewing Company, located in Houston, TX. Not an employee just a good customer.
After a 50+ year career in pro-audio electronics (and a lifetime hobby), I never fail to find your videos both informative and entertaining. No matter how many amps, EQs, compressors, mixers - you name it - that I've had my hands in, I always find something new to learn in your posts. I do need to point something out, though, that I think you might have missed. Fender typically uses a shorting jack for the primary speaker output on their amps, and you can't measure the continuity of the output transformer secondary without either putting a dummy plug in the jack, or just manually moving the jack's main leaf away from the shorting leaf. When you measured the OT secondary in this video, the low resistance you read was just the resistance of your test leads from one ground point to another. And how dare I correct the magnificent Uncle Doug?!
I generally place a small piece of paper or business card between the hot and ground leaves, John.....but in this case it appears that I failed to do so. Thanks for your helpful input.
Love the video of the Bandmaster. I acquired one of these a little over a year ago when I had an old Silvertone 1482 I fixed up for sale. A young guy called me and didn't care for the AB763 sound so he wanted to trade even! I about bit my tongue! I have it now and it was like this one in the way that all the components were dated 1966, transformer, pots, etc. But the stamp inside the chassis says 1967. It's as clean as a whistle inside and had all the normal upgrades already installed (F&T filter caps, the coupling caps, but the blue tone caps were left intact) If I didn't know better (or not), I wouldn't be surprised if you did the work. The original wiring was immaculate like this pristine amp you have in this video. And it sounds fantastic! I hooked it up to the 2x12 Black Widow spkrs in my Peavey Mace combo cabinet and I think I found a diamond in the rough as it really sings thru those '78 Black Widows. I can't imagine how this younger guy would not like this old amp, unless he just wanted the more early break up that the '63 Silvertone had. Or maybe he just doesn't understand what us old guys know when it comes to sound. It takes pedals well too; different reverb pedals add "out of this world" ambience to it. I'll probably hang onto this one. Keep up the good video's, they always lighten up my day and give me something to watch on the days I have difficulties getting around. Good to see you're still doing well. PS; I'm in Ky and it hit 101 yesterday with a miserable dewpoint of 78. It's steamy around here.
Uncle doug, I am a tech junkie and a nerd when it comes to learning about amplifiers and Circuts and your videos are a fix to my addiction. The amount of information I get from these videos is amazing, a complete master class. The way you are able to explain things without leaving gaps or questions is very much appreciated. Thanks for everything
Educational, informative, entertaining, and down right hilarious... Was laughing out loud in under a minute! Thanks as always Doug, and much love to you, yours, and the furry posse.
Dude I remember the all original JTM 45 Marshall from maybe just over a year ago.. You had already done a number of true to value retaining repairs and restorations to that absolute gem of an amplifier.. but THEN, you had to replace one of the big blue 50uf caps which of course are not made anymore, so you took the old one and drilled out the core, then put the new one inside of it like an M80 into a drilled out tree stump.. when it was reinatalled, it looked comoletely original and just furthered your legend far as I'm concerned!! long live uncle Doug!!
another in depth troubleshoot and repair. makes me want to double check my work on my 67 super. my dad would tear down his motorcycle engines to see why they worked well, but, he would tweak them putting them back together and they always worked even better!!
One of the greatest uncles in human history.
Thanks so much, Joe :)
Even more famous than uncle Fester 🤣
@@MrPnew1 And not nearly as moldy ;)
The best *furry animal* guitar amp repairer in living * hicstory...mac nif hic a sant episode. Thanks uncle Doug.
@@alexbozas887 Wow....high praise indeed, Alex. Thanks.
I know this is a 2 year old video at this point, but I had to comment on this one. You had me cracking up throughout this video. Thank you for all of the wisdom and comedic value that you bestow on us, Uncle Doug.
You're welcome, Manuel. I'm glad you enjoyed it :)
The level of "Teaching" is beyond scale, so damn good presented and explained it is an honor just to be watching. Really good and thank you!
Wow....thanks so much, G :)
@@UncleDoug Uncle Doug's humour makes these videos all the more entertaining!
@@TheMentalblockrock Thanks, John. We try to keep it entertaining :)
well put!
It’s true, the corny jokes and bringing in the pets as characters makes the content so much easier to engage with and endears the audience. I feel like I had a couple of elementary school teachers that did the same kind of stuff and they were my favorites and helped us the most.
Awww, here's to Rusty! May he always get the squeeker, play with the best tennis ball, and may his treats cache be filled with good boy goodies! He was your best worker! 😂
Yes, indeed. Thanks so much, Curtis :)
I’m so blessed that I had one amp repaired by Uncle Doug and I’m sure the owner of this amp is a very happy camper since this was just a typical repair for the Master ! 👍
Thanks so much, Doug. Nothing pleases us more than a happy former customer. Our best to you and yours.
I learned everything I know about amps from Uncle Doug. He is great!❤
Glad to hear it, OAB. Thanks :)
Meticulous attention to details was demonstrated here. That's why I love your repair videos Uncle Doug.
That and the sarcasm sprinkled within the video. Mitzi is looking well. Shop mice visiting don't stand a chance.
Thanks so much, HM :)
Stay hydrated: take a drink every time Uncle Doug says magnificent!
Those were the.......hic!.....rules :)
Always a pleasure to watch you bringing these venerable old amps back to life, Doug.
Thanks for joining us, Frank.
Excellent rendition of Jailbreak! Truly great music!
Thanks, Mr. Z :):)
So sad to hear about Rusty! I hope you are doing better now. I have lost many pets over the years and it’s something that does not really fully heal. I’m sure Rusty is playing with all the good boys and girls!
I hope so too, William. Thanks :)
In 1963 my dad boùght me a Fender (pre CBS) Jaguar and Bandmaster amp. I started a band and put myself through school with the money I made. I still have them both. Fond memories of those days. Shalom/gw PS I quit the band when I got married. I've played in churches ever since. ;-)) Happy Easter!
Your father was a wise and generous man, GA, and his investment certainly paid off quite well. Thanks for sharing.
You (and Ted Woodford) are true inspirations. This is some of the best and most informative guitar content on youtube, and the personalities, human and otherwise, couldn't be more warm and genuine and engaging. Thanks for showing us all how it's done, Uncle Doug :)
Thanks so much, Carlito. We really appreciate it :)
This channel teached me more in one video than 4 years of electrical engineering school. This should be a mandatory watch when learning basics of electrical engineering.
Thanks so much, David :)
Saw this just in time for my morning coffee. Magnificent. I used to have a bandmaster
( Actually 2 different ones) and a tremolux. Kicking myself now for selling them but at the time I must have thought it was necessary. Thank you Doug. Your videos are just wonderful. I've learned so much from you.
That's great to hear, PM.
The amp sounds And looks just pristine. Sounds fantastic. Better than I had anticipated
Thanks so much, IF :)
The prospect of a hot shop and UD working in his tighty-whities fully supports your “no filming the presenter” policy. Another great video Doug! Thanks.
You have no idea, Greg. The neighbor's have added "frolicking in his undies" to the list of Restraining Order restrictions.
@@UncleDoug Fun fact UD... The Gentleman on Tool Time that was only exposed from the nose up was nekkid from the chest down... My awnt was on set and passed out with the vapors. Makes ya wonder. Great video and cheers from the dessert! ;)
@@fullwaverecked Thanks, FW. I had the vapors once, and haven't eaten beans and sauerkraut since.
@@UncleDoug Oh oh. That's what I'm having for dinner... Thank the Lord for Coolwhip! Cheers!
@@UncleDoug , I have attacks of the "vapors" fairly regularly, too my wife's consternation, but those are mostly sound and fury that signify nothing. But when our little terrier gets the vapors, however, the best course of action is to run for the hills! You know, it's funny, we have had cats in the past, and I don't remember the cats ever passing gas. They were outside cats however and they did their business in the woods, which was great because we didn't have to deal with a stinky litter box.
Doug. I started rebuilding old Ampegs a bunch of years back, then went off kilter and bought a salvage '74 Twin. At that point I started watching your vids. Great stuff! I am now building amps and I understand just about what every comonent does and why. You are a great teacher. You are the Walter White of Amps. You are the "One Who Knocks"!
That's great to hear, Ken. Thanks so much :)
Using ‘Parsec’ properly always makes me happy.
As a former science teacher, I like to work it into daily speech whenever possible ;)
It’s magnificent
Old School Army tech here, and I love it, Uncle Doug! I had my US Army Basic Electronics Training at Ft. Gordon GA in 1978. My MOS was 32-H "Fixed Station Radio Repairer", and the training was very heavily about Vacuum Tube theory and operation. Vacuum tubes were on their way out in most areas, but not in Radio. You can't get high power transmission (10KW-20KW) out of transistors, not even close. So we were taught all about vacuum tubes and the associated circuits.
After ten years of military service, I was medically retired (wounded in Central America) and I went to college and got my degree as an Electronics Technician initially, and I finally ended up with a BSEE. Since then I mostly have done electronics repairs, and I specialized in the restoration of antique electronics equipment and tube guitar amplifiers. I fix Solid State amps too, but I don't especially like working with them. My heart is in the old stuff with tubes.
I love your channel, Uncle Doug, it is a refresher course for me watching you fix up these old guitar amplifiers. I pay close attention to you, and I pick up a lot of tips and tricks. We're all learning together in this world, and I'll be learning and teaching until I leave this remarkable world. Thank you for sharing your knowledge and expertise with us, Uncle Doug, you are doing a valuable service to the community of budding technicians and refreshing we older technicians!
Thanks so much for your wonderful message, Wade. This is the reason that I read and respond to every viewer comment.....so that I will never miss a very special one like yours. I am honored by your kind words and wish you the very best in all your endeavors.
Well, you got your classics, then you got your epics. This is epic Uncle Doug. My BF Bassman had an AA165 tube chart sticker in the cabinet. But no, it was actually the AB165 upon arrival from Ebay. Fraud? No. This was many years ago, and seller was not misleading. Thrifty Fender just used up whatever they had - stickers, chassis - you name it.
I have seen many tube charts on Fenders where a tube was crossed-out and a new type written -in. Thrifty!
Indeed, Steve. Thrift is a virtue that seems to be lost in both big business and government nowadays.
I'm sorry for your great loss Doug.
So was the mortician, when I woke up :)
Hi Uncle Doug!! Thanks for this video. I am playing with an old tape recorder, and the explanation about leaking capacitors will be very useful. I used a variac to reform the electrolityc caps, and this will help to continue with the dignose. For now it is working, and there is no hum, but I am not sure if they are leaking, or de ESR changed.
Best regards !
When it comes to electrolytics, Juan, it's generally best to simply replace them.....but I'll leave that to your judgement. Best of luck.
Thanks a lot again Uncle Doug!!
Electrolytics in storage will show increased DC leakage due to oxide layer deterioration, manufacturers usually recommend undertaking a re-forming procedure by application of voltage gradually increasing to nominal with current limited to about twice the nominal leakage current for an hour or so. If you read electrolytic caps data sheets carefully, somewhere there, buried will be a line mentioning, that the rubber seal is guaranteed to maintain its condition for 10 to 15 years only.
I have to say. I come here for the interesting and informative content. I stay for the amazing dry running commentary! "My phase is getting inverted just looking at this jewel" Love it. Thanks Uncle Doug.
Thanks for joining us, JR :)
Uncle Doug! Thank you so much for making this video...as someone aspiring to work some day as an amp builder and tech, seeing your process is incredibly insightful. I am currently finishing up my first amp build right now and have some videos up on my channel. Please do take a look and share your thoughts on my build if you can spare the time from your undoubtedly busy schedule fixing these pieces of rock 'n roll history!
Thanks for your very nice comments, EI. Will do :)
@elcectroidiot
This is a great hobby and rewarding pastime but trust me,,,, use your parents college money and get a science degree in engineering or something else. You don't want this as a career choice! Not unless you happen to also be a guitarist with a girlfriend you can fall back on! Otherwise you likely end up homeless!
Of course you could do worse. You could waste your parents money on an Arts degree in philosophy!
L.oL.!
@@southboundsuarez9832 well it started out as a hobby but having no other useful skill besides a bit of electronics knowledge leaves no choice but to monetize it somehow lol.
@@southboundsuarez9832 Probably good advice, SS, but I hate to discourage people from at least trying.
@@Santaji55
Hey Man welcome aboard! I am just pokin some fun at all of us. Don't take me too seriously,,, I certainly don't. Except maybe if you actually are a philosophy major. In that case I completely understand. But seriously, we all gotta get our hustle on, one way or another, With the whacky inflation the way it is, we do what we gotta do! (won't get into politics) Whatever it takes to fulfill ones appetite and secure safe haven for oneself! It certainly easier to support ones self thru what one enjoys versus having to toil at something that is displeasing or disgraceful. However, there are seldom if any get rich quick ways to achieve wealth. Even crime requires much effort (plus it usually is such bad karma). It is much easier directing your attention to things that keep your interests and stuff you can't get enough of...
Unfortunately even the best hobbies, leisure pursuits and greatest dreams can become very sour once that they become full on commitments and obligations that require your ability to consistently exceed expectations!
For me doing this as a semi (un)-professional hobby, that is in addition to my full time high paying job has afforded me the ability to pick and choose who, when and what I want to work on. I can pretend to be a real business and take advantage of hanging out on the outside fringe of what's moving and shaking, enjoying the social aspect of belonging to somewhat of the larger bigger industry like I am an insider.
I get to look over the shoulders of others and weasel my way into different circles where I can name drop! Its like being a party crasher. I am getting away at being the Biggest Poser! Its funny that as I write this, I am laughing at myself trying to describe myself, who am I and just exactly what I am doing or what I have to gain ..... Really it's a social thing for me. I have gone to alot of trouble and expense to put on a front, just so at the very end I can lay claim to getting my own NAMM show tickets!
I have pretty good cred because I do good work on the stuff I like to work on and I am cheap. I pay to have business, usually a little bit more than I bring into it. My real shitty job pays for everything in my livelyhood including subsidizing this in addition to paying for several other of my expensive hobbies!
This amp thing is the only hobby that helps support itself but sometimes it can get old. I pace myself as to not lose interests.
I am as old as you. Built a bass guitar and amp, started as an apprentice mechanical engineer at a gas turbine research establishment - but in the UK. Our band built everything it needed to play the music it wanted to play. A Fender Bass cost as much as a new car, so we built and built and built. We worked outside the usual musical agencies, as their primary bank appeared to be gambling machines. 6G6s were replaced by EL33s and EL34s. It was so much fun that the survivors are still reeling as to how it so quickly blew up. Do not ask us, for we have no answers.
Now I have a drinking game with your sound cuts. How are the mighty fallen. (Puts down violin.) RIP Rusty. Few people deserve pets.
Thanks for your interesting commentary, Tony. It's always good to hear from you :)
@@UncleDoug The sams. YT is sketchy on this desert island. 😎
105° looser units is 40,5° winner units :) ☻ HOT AS HELL!
Yes, indeed, G.
Magnificent video Uncle Doug.
👍👍
Thanks, Amo :)
Thanks, Uncle Doug! I am now well hydrated.
Then our work here is done ;)
Thank you for the free education. I'm new to the tube amp world a few years) for about a year I've been wanting to learn how to work on them and have yet to but I've bought some tools and books and between the books and your videos I'm getting a great education. I'm about to order a kit was thinking id start with a tweed and was set on a champ but now I'm thinking maybe a Princeton. I have a 65 drri and a marshall sv20c. Thanks uncle Doug. Your videos are such a gift.
You're quite welcome, Al. I'm glad the videos are helpful. Good luck with your projects.
@Uncle Doug like you I'm a cat lover got two partners that have been my sidekicks since hurricane Katrina. Strange at 47 I'm just now interested in this stuff and I sure wish I'd got the bug 20 years ago but we didn't have you tube then. I'll keep watching your channel and really appreciate you soon I'll make a contribution when I get out from under a few things because your content is free but more valuable then anything else I've ever seen on you tube and your generous enough to let us watch free. You could easily charge alot so I thank you. But I'll stop distracting you. As I'm sure you have more projects
@@handwiredbyme Thanks for your input, Al. It's good to hear from a fellow cat fancier :)
About 520 miles east of you it's also sweltering. A day with a new Uncle Doug video is a good day. Thanks for all that you do here!
I lived in Austin for a while (you're probably in San Antone) and the humidity could reduce a freshly-ironed shirt in to a wadded-up, soaked rag in minutes. Thanks for the nice comments ;)
Wow, you mentioned magnificent 4 times in the vid opening sequence, that was half a bottle of vodka. Was seeing double! Ah! I see the logic, stereo vision without glasses. Cool, going to re-watch the vid every night this week.
Awesome vid, as always.
Thanks, ISO. Glad you enjoyed it :)
My favorite channel in the realm of classic design in the tube amp community, here in UA-cam land.
I love the commentary too. ☺️
Glad to hear it KB. Thanks :)
love Uncle Doug and Jack and Ollie (and Rusty R.I.P.)!
Thanks, DK :)
Cheers for another Gem of knowledge and Pearl of wisdom.
Thanks, B :)
"polar poo" great product placement Uncle Doug. Excellent channel, thank you.
I'm still waiting for the royalty check from Circle-K, Steve. Glad you enjoyed it :)
I was going to say the same thing.
I love your beautiful cosmetics. Looks better than some factory work I have seen.
Thanks, Monty :)
Smirnoff! Exactly what I'm currently hydrating with! Thanks, Uncle Doug. Always looking out for the good health of your followers, eh? OK, Let's ROCK!
Sounds good, Maurice. Thanks for watching :)
I wish you had been my instructor in 75. One of the best trouble shooters I've had the pleasure to watch. Nothing like a tube to supply the best sound quality. I've been retired a long time. Last I knew, high power could only be accomplished with tubes. Even after 40 plus years in electronics, I'm still learning tricks from you. Great job! Thanks for the fun learning experience.
You're welcome, CH. Glad you enjoyed it.
Always great showing off the Fender Amp mixed with humor and a great amount of Hydration
Glad you enjoyed it, Lane.
Finally I had a great reason to crack open and down my case of vintage Billy Beer. Please tell Jimmy to pray for me, I’ll be in the ER with a septic bowel obstruction. Thanks UD!
It would probably have had the same effect when it was new, 42 years ago, T.
I laughed, I learned. Then, I laughed and learned even more! And I DID listen to how many times I heard the word "Magnificent". I had to pour another glass of wine to keep up my end of the challenge, LOL. Brilliant video once again!!
Thanks, Bob. Glad you enjoyed it :)
Thank goodness I was drinking coffee every time you said "magnificent!" Although my hands are shaking now, so thanks for that! ;)
A near-lethal dose of caffeine is always the best way to start the day :)
..... It's very important to have your shop kitty assistant with you when you work on stuff....
So true, Floyd :)
Wow, what a total Time Machine!
Excellent, thank you for sharing with us.
Thanks for joining us, HK.
7 minutes in and i have had 7 jiggers of rum. man there's going to be a month's worth of refreshments in this video.
nice amp! and another great video
Thanks so much, Ford. That's where the term "Magnificent 7" came from :)
Such a pleasure to come back here for another beautiful Fender repair and get to learn more and more. Our Uncle Doug really is the best !
Thanks, Andre :)
Lincoln's cabin....you are hilarious!
Glad you enjoyed it, Charles :)
I am so impressed, as always.....I like the addition of Mitzi.......she's a mighty pretty kitty....and I see her inherent good taste,,,,,,WHATABURGER !!!!!......Yeah, Uncle Doug!!!! Thank you so much!!!!!...............G
Thanks for watching, George. Mitzi is growing like a little weed and now lives in the workshop, helping me often with soldering chores ;)
Unc.....You are MAGNIFICENT......HicUp!
Thanks, Steve.........Burp !!!
Always learning from you .....
Hot here too. Today is 103. North Texas area. I make notes on your classes of fix-it.....
Thanks
Mark
Greetings, Mark. It's been a sweltering hell lately, but at least there's plenty of humidity ;)
After watching this magnificent video I fell out of my chair. I concluded it was your best work to date, thanks Uncle Doug.
Wow......high praise indeed, JB. Thanks :)
@@UncleDoug I think all that hydration helped 😋
@@Jesse-B It sure didn't hurt ;)
There's not a lot of UA-cam I would watch for an hour. Your videos are awesome, thank you, keep it up!
Thanks, Matt. Will do :)
I usually get the new Uncle Doug video first thing in the morning and procrastinate doing what I should be doing by getting another cup of coffee and settling down at my PC. Well this video came as I was just getting ready to make some shrimp scampi so I got a nice video and a nice dinner. Along with many jiggers of water, a Gin and Tonic would have been better but the Doc says no and Me Darling Wife watches me like a hawk. This is one of the most instructive ones Doug has done in a long time. Thanks Doug
You're welcome, Martin. Thanks so much for joining us :)
What a Magnificent Video, Thanks Uncle Doug.
You're welcome, OR.
My favorite Uncle that's for sure!
Thanks, my favorite nephew :)
The video was great as usual but my Smirnoff was empty after the first 15 minutes. Magnificent!
Thanks, but next time start with a full bottle ;)
"...pennies on the dollar..." Priceless! Well done, brother!
Thanks, Stirling :)
This vid made my day. It is really hot here in the UK today and I am sat here in the garden with a cool beer watching this amazing amp being worked on! Thanks Uncle Doug 👍
That's great to hear, Richard. Open another one and I'll be there shortly. ;)
spent Summer 1967 in Phoenix w/ Uncle who was in AF/Luke AFB and loved the 110 degree heat everyday!!! Do recall the refreshment truck coming curbside and making Dr Pepper from the fountain, WHAT A TREAT.
Love the channel, keep up the good work.
Thanks for sharing, TJ. Will do :)
Always great info, and as always I love the humor. Right up my alley.
Glad you enjoyed it, Steven :)
Another great video, Uncle Doug. I used to service these Fender amps back in the 70's, and after watching your videos it shames me to think about what I didn't know back then.
Thanks, Arthur. I feel the same when I look at some of my early videos ;)
Uncle Doug, Thanks for the "Magnificent" video! I would have commented sooner but I needed a couple of days to recover after movie double feature :) As always, I learn something new and have a lot of fun with your videos!
That's great to hear, Chris.....about the fun, not the hangover ;)
Hey Doug. Saw the mug. Live a 1/4 mile away. I used to work at APU. Great place.
Love your videos. Thanks
Our grand-daughter graduated from there, Jeff......and we got a nice coffee cup :) Glad you enjoyed the vid.
God Bless and Protect you and your family Uncle Doug:)
Thanks so much, F1. Likewise to you and yours.
Great to watch the master at wotk, Rock On :)
Thanks for joining us, P :)
@@UncleDoug :)
The tone of that amp is hotter than the the noonday sun! Wonderful restoration Uncle Doug! Stay cool!
Thanks so much, Bela :) I'm trying.
I was well hydrated and at the edge of my seat. Riveting video sir, I will definitely be tuning in to future broadcasts. Thank you.
I'm glad it went well, Robert. Thanks for joining us :)
@@UncleDoug I look forward to to joining you on Patreon.
@@robertcope2465 We will definitely appreciate your support of our channel, Robert.
Once again I learned a lot and this time also got magnificently hydrated while enjoying your work.Doesn't get much better than this.
Glad to hear it, Doc :)
You are a National Treasure!!! A Wonderful Video
Wow.....thanks twice, Lee :)
I appreciate your channel for it’s free-flowingish pace(I realize editing is necessary) and it’s candid nature. With that said, there are channels to visit that offer Nit-Picky restorations and very in depth procedure explanations. Uncle Doug has an eye for hobbyist restorations, and I’m sure he understands that we don’t all have a cabinet or shelving for our parts stock. Many of us work with what’s on hand and with knowledge passed down from excellent mentors as yourself, it’s immensely appreciated. I truly love your “magnificent” videos Uncle Doug and I hope you always stay as inviting, understanding, and courteous as you are. Stay safe and awesome U.D.
Thanks so much for your kind words, Matthew.
I believe that your viewers know by now that they send the best, to the best... I love your enthusiasm when you get an un-molested amp in for service. I've only seen 15 minutes of this video so far but I know it will have a stellar outcome. Thanks.
You're welcome, Paul. I hope you enjoy all our videos.
From one amp tech to another, your response to commenters in the "News Desk Update" was absolutely hilarious! I really did LOL on that one. Your explanations and delivery of detail along the way is outstanding sir. Thank you for your efforts.
Thanks so much, IP. Glad you enjoyed it :)
Your high regard for safety is appreciated, as well as the educational aspect of the videos you make for us. Many thanks !!
The pleasure is all ours, Mr. CC.
Late to the party but I just want to say this was Magnificent. Edit: This was brought to you by Saint Arnold Brewing Company, located in Houston, TX. Not an employee just a good customer.
Thanks, Bob.....Glad you made it :)
Sweet sound and best of all, Noise and hum free... And this is not because I have ingested several beers 😊. Grate work 👍
Thanks, Allan :)
Another magnificent beauty! I was saving this video to enjoy at length. Cheers Uncle Doug! Mission accomplished!
Thanks so much, Kort.
Absoloutly the most beautifull amp I've heard you work on. Keep your fingers out of light sockets. Been there done that.
Wow...thanks so much, SS. Will do :)
Another great video from the Master...Thank you Uncle Doug!!!👍👍👍👍🎸🎸🎸🎸
Thanks, Doc. Glad you enjoyed it :)
Gotta be honest; I took extra sips between Uncle Doug's "magnificent" mentions. Thanks for the magnificent [sips beer] video Uncle Doug!
You're welcome.....hic.......Tom :)
Thanks Doug, now I’m hammered… I did decide to take a shot everytime you say “Jewel” too soooo that’s on me lol 😂
Double jeopardy, Joby, a sure path to cirrhosis ;)
As always, Nothing but, Magnificent Best! Thx Uncle Doug and Team.
You're......hic.....welcome, Curtis.
After a 50+ year career in pro-audio electronics (and a lifetime hobby), I never fail to find your videos both informative and entertaining. No matter how many amps, EQs, compressors, mixers - you name it - that I've had my hands in, I always find something new to learn in your posts. I do need to point something out, though, that I think you might have missed.
Fender typically uses a shorting jack for the primary speaker output on their amps, and you can't measure the continuity of the output transformer secondary without either putting a dummy plug in the jack, or just manually moving the jack's main leaf away from the shorting leaf. When you measured the OT secondary in this video, the low resistance you read was just the resistance of your test leads from one ground point to another. And how dare I correct the magnificent Uncle Doug?!
I generally place a small piece of paper or business card between the hot and ground leaves, John.....but in this case it appears that I failed to do so. Thanks for your helpful input.
Love the video of the Bandmaster. I acquired one of these a little over a year ago when I had an old Silvertone 1482 I fixed up for sale. A young guy called me and didn't care for the AB763 sound so he wanted to trade even! I about bit my tongue! I have it now and it was like this one in the way that all the components were dated 1966, transformer, pots, etc. But the stamp inside the chassis says 1967. It's as clean as a whistle inside and had all the normal upgrades already installed (F&T filter caps, the coupling caps, but the blue tone caps were left intact) If I didn't know better (or not), I wouldn't be surprised if you did the work. The original wiring was immaculate like this pristine amp you have in this video. And it sounds fantastic! I hooked it up to the 2x12 Black Widow spkrs in my Peavey Mace combo cabinet and I think I found a diamond in the rough as it really sings thru those '78 Black Widows. I can't imagine how this younger guy would not like this old amp, unless he just wanted the more early break up that the '63 Silvertone had. Or maybe he just doesn't understand what us old guys know when it comes to sound. It takes pedals well too; different reverb pedals add "out of this world" ambience to it. I'll probably hang onto this one. Keep up the good video's, they always lighten up my day and give me something to watch on the days I have difficulties getting around. Good to see you're still doing well. PS; I'm in Ky and it hit 101 yesterday with a miserable dewpoint of 78. It's steamy around here.
Thanks for sharing, John. It sounds like both amps found a good home.....win....win :)
Magnificent video. Thank you for sharing the amp and your knowledge.
Glad you enjoyed it, Andrew :)
Awesome! I Learn a bit more each time I watch these.Thank you I have a better understanding of my 1965 Bandmaster ✌🏻❤
That's our goal, Mike :)
Uncle doug, I am a tech junkie and a nerd when it comes to learning about amplifiers and Circuts and your videos are a fix to my addiction. The amount of information I get from these videos is amazing, a complete master class. The way you are able to explain things without leaving gaps or questions is very much appreciated. Thanks for everything
You're welcome, Justin :)
Uncle doug!that was a magneficent trouble shoot and repair!now Im impaired!lolCheers!
Glad you enjoyed it, BJG :)
True statement, Doug! If one should get ahold of the B+ while connected to ground, they would surely get a MAGNIFICENT jolt!
.....and maybe a final one ;)
Top notch entertainment! And lots of knowledge from the tone professor! Stay strong Doug.
Thanks, R. Will do :)
Hi Doug the leaking coupling cap demo was great. Thanks for all you do. Good boy Rusty
You are very welcome, Wade :)
Educational, informative, entertaining, and down right hilarious... Was laughing out loud in under a minute! Thanks as always Doug, and much love to you, yours, and the furry posse.
Thanks so much, RD. Glad you enjoyed the vid :)
Another gem of a video experience. Cheers!
Thanks, S :)
Thanks again for the knowledge, keep yourself & the kitties cool!
You're welcome, Nirky. Will try to do :)
Awesome as usual Uncle Doug, I'm full of my magnificent decaf now! Blessings to the spirit of Rusty.
Thanks so much, Stewart.
An amazingly pristine and classic amp.. even more amazing service, repair and restoration work! Cheers Uncle Doug!!!!
Thanks so much, Chris :)
Dude I remember the all original JTM 45 Marshall from maybe just over a year ago.. You had already done a number of true to value retaining repairs and restorations to that absolute gem of an amplifier.. but THEN, you had to replace one of the big blue 50uf caps which of course are not made anymore, so you took the old one and drilled out the core, then put the new one inside of it like an M80 into a drilled out tree stump.. when it was reinatalled, it looked comoletely original and just furthered your legend far as I'm concerned!! long live uncle Doug!!
@@christopherallen5603 Thanks so much, Chris. :)
The relicing on that chassis tilt block is sublime
Hence the substantial price.....but worth every dime. ;)
It looks like it spent a few good years in the automotive section of the laboratory.
@@ross3818 I believe that Honest Abe used to work at Pep Boys.
I remember when this amp was new. Thanks for a "magnificent" video. I'm thirty. I'll go get a drink now.
Have one for us, Rich :)
another in depth troubleshoot and repair. makes me want to double check my work on my 67 super. my dad would tear down his motorcycle engines to see why they worked well, but, he would tweak them putting them back together and they always worked even better!!
Good luck with your project, Michael.
Lincoln logs LOL Uncle Doug you always got a good one❤❤❤
Thanks, Charles :)