Do you have any videos on doing a proper seal coat as well as a proper finish? Also, I was curious when using pigment color and pouring into voids what do you do when it over fills and gets onto the wood that you don't want color on?
Great question. I’m not using fiberglass so, I don’t use those other products. But typically I just let the epoxy harden then peel it up or throw away the one time use product.
Hi. Ive started making larger projects, and mixing larger batches. Would you recommend mixing with a drill?. If so how would you get rid of the bubbles mixing with a mixer and drill produce. Now with the smaller mixes i mix with a spatuala, and put my mixing pot in warm water to get rid of the bubbles. Thank you for your time.
Use a heat gun or blow torch to get bubbles out. Or before you combine your A & B put them in warm water for 10 mins or so. I use a big mixing cup and drill head and no bubbles. Once you pour use a heat gun or blow torch to pop all bubbles.
Hey man, i use syringes to measure the resin, part A, and part B separately, how can i clean the excess part A and B from the syringes? They are sticky and they never solidify! Any idea or tips?
I’m not really sure, I would try to use acetone or xylol xylene www.amazon.com/dp/B000V4L86A/ref=cm_sw_r_as_gl_api_glt_fabc_C66S98T81AVFHEBV40MG?linkCode=ml2&tag=goodviewwoodw-20
I’m not really sure, I would try to use acetone or xylol xylene www.amazon.com/dp/B000V4L86A/ref=cm_sw_r_as_gl_api_glt_fabc_C66S98T81AVFHEBV40MG?linkCode=ml2&tag=goodviewwoodw-20
That was really helpful. I was imagining all sorts of cleaning products were required, so this simplicity is great!
Thank you! Good luck on your project!
Great lesson. I so hate cleaning my buckets and tools. I am definitely going to do it this way from now on. Thanks.
How to clean your tools... Don't!
This is exactly what I wanted to hear. Cheers!
😂 you’re welcome!!
Thank you. Very helpful info and helps me save money replacing buckets and mixers.
You’re welcome!
After watching you try to remove it from the bucket, I decided just to by new ones every time lol
😂
Do you have any videos on doing a proper seal coat as well as a proper finish? Also, I was curious when using pigment color and pouring into voids what do you do when it over fills and gets onto the wood that you don't want color on?
Thanks for the lesson.
What is the first blue used in the second board you show in this video. Its what I want to match for a vanity with live edge wood.
Thanks for sharing this info.🙂
Do you clean your paint brushes if you coat the exterior of the table with a clear epoxy?
What about fin rollers, syringes, and other tools used on the fiberglass?
Great question. I’m not using fiberglass so, I don’t use those other products. But typically I just let the epoxy harden then peel it up or throw away the one time use product.
How does it work for a 5 gallon bucket?
Hi. Ive started making larger projects, and mixing larger batches. Would you recommend mixing with a drill?. If so how would you get rid of the bubbles mixing with a mixer and drill produce. Now with the smaller mixes i mix with a spatuala, and put my mixing pot in warm water to get rid of the bubbles. Thank you for your time.
Use a heat gun or blow torch to get bubbles out. Or before you combine your A & B put them in warm water for 10 mins or so. I use a big mixing cup and drill head and no bubbles. Once you pour use a heat gun or blow torch to pop all bubbles.
Great tips. Also I’m stealing that joke 😅
Hey man, i use syringes to measure the resin, part A, and part B separately, how can i clean the excess part A and B from the syringes? They are sticky and they never solidify! Any idea or tips?
I’m not really sure, I would try to use acetone or xylol xylene
www.amazon.com/dp/B000V4L86A/ref=cm_sw_r_as_gl_api_glt_fabc_C66S98T81AVFHEBV40MG?linkCode=ml2&tag=goodviewwoodw-20
I’m not really sure, I would try to use acetone or xylol xylene
www.amazon.com/dp/B000V4L86A/ref=cm_sw_r_as_gl_api_glt_fabc_C66S98T81AVFHEBV40MG?linkCode=ml2&tag=goodviewwoodw-20
Good info!
But what do you use to clean your buckets with residue?
You can wipe them out with xylene
@@GoodViewWoodworks thanks man!
now to find where I can get a resin measuring bucket thingy :D
When are you going to use that big round piece of wood in the back?
No joke, that's a massive burl cookie!
😆🤣😂😹 funny dude!!
I’m first again 😊