I got one in 2020 my serial number says i have the 99th built that year it’s a great gun i ran it very hard the first 3 days and the stock internals couldn’t take it anymore but then i completely upgraded everything along with gate titan and it’s unbelievable
I sold mine to a buddy after purchasing a Wolverine MTW, and I have to say you got unlucky, I guess. Between me and my buddy that gun has shot at least 100k bbs without an issue. It has a unique sound due to the recoil system. I love hearing it on the field followed up by players yelling hit. Also, it's been running an 11.1 lipo the whole time.
Just purchased this gun in the two tone. Love ing it so far but that flash hider is killing it for me. I removed the small screw but it’s still pretty damn hard to twist off. Not sure why KWA felt the need to add the worlds toughest glue in addition to the screw knowing damn well many people want to add their own touch to their guns. Is there an easier way of twisting the flash hider off? Also, clock wise or counter clock wise? Should I put the thing in hot water? Or use a heat gun? Any suggestions would be greatly appreciated 🫡🇺🇸
I see on Evike it seems the barrel thread is 14mm Negative. My Kriss Vector is the same thread so assuming you are looking at the barrel facing you twist Clockwise to loosen and Counter Clockwise to tighten. It's not intuitive! By the way does your gun stop firing when the mag is empty? I talked to several people who say that is not a feature.
Sorry for the late response, but exactly what @HarajukuNinja says. There might be some loctite underneath the thread, so it might take some force to take it off. Be careful not to but too much force behind it tho. As for the empty mag function, we've might a mistake with putting it in the video. KWA used to claim this replica had it, on their website, but unfortunately that also was a mistake. Their AEG 2.5 and 3 do have the function, but the AEG 2.5+ and 3+ don't, because of the compatibility with a Gate Titan mosfet. With the KWA RM4 Ronin T10 being an AEG 3+, it sadly doesn't offer the empty mag function.
Good and quality videos in your channel and still low amount of views and subscribers. I feel your pain, but keep up the good work. Cheers from Hungary!
They say on their website they recommend the 11.1 Titan lion battery for this gun, I see you have a 7.4... do you think perhaps it can't handle the 11.1? I don't want to damage my new one! :)
It absolutely can, I'm running a 11.1 35a 2500 capacity battery and never had an issue while I was stock. Probably 7000-10000 bbs before I upgraded it :)
@Chewy In the video we've used a 7.4V for demonstration purposes. The replica can handle a 11.1V battery, but keep in mind that those batteries increase wear of internal parts. So to increase the lifespan of the replica and its original parts, a 7.4V might be better. If you want to achieve a better trigger response and a higher rate of fire, then go with the 11.1V.
Yes, you can. There's a small grub screw located on the flash hider that needs to be loosened first, after which you can twist it off. This takes a fair amount of force/strength, as it's secured with loctite. So be mindful of that.
Ordered this gun and 2 others. The money left my account but your website instantly told me the order has been cancelled. I will come back and edit this comment when this has been resolved.
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
I got one in 2020 my serial number says i have the 99th built that year it’s a great gun i ran it very hard the first 3 days and the stock internals couldn’t take it anymore but then i completely upgraded everything along with gate titan and it’s unbelievable
I sold mine to a buddy after purchasing a Wolverine MTW, and I have to say you got unlucky, I guess. Between me and my buddy that gun has shot at least 100k bbs without an issue. It has a unique sound due to the recoil system. I love hearing it on the field followed up by players yelling hit. Also, it's been running an 11.1 lipo the whole time.
@@XteriorxpertsFLi have t10 too what would you suggest for upgrades?
Just purchased this gun in the two tone. Love ing it so far but that flash hider is killing it for me.
I removed the small screw but it’s still pretty damn hard to twist off. Not sure why KWA felt the need to add the worlds toughest glue in addition to the screw knowing damn well many people want to add their own touch to their guns.
Is there an easier way of twisting the flash hider off? Also, clock wise or counter clock wise?
Should I put the thing in hot water? Or use a heat gun?
Any suggestions would be greatly appreciated 🫡🇺🇸
I see on Evike it seems the barrel thread is 14mm Negative. My Kriss Vector is the same thread so assuming you are looking at the barrel facing you twist Clockwise to loosen and Counter Clockwise to tighten. It's not intuitive! By the way does your gun stop firing when the mag is empty? I talked to several people who say that is not a feature.
Sorry for the late response, but exactly what @HarajukuNinja says. There might be some loctite underneath the thread, so it might take some force to take it off. Be careful not to but too much force behind it tho. As for the empty mag function, we've might a mistake with putting it in the video. KWA used to claim this replica had it, on their website, but unfortunately that also was a mistake. Their AEG 2.5 and 3 do have the function, but the AEG 2.5+ and 3+ don't, because of the compatibility with a Gate Titan mosfet. With the KWA RM4 Ronin T10 being an AEG 3+, it sadly doesn't offer the empty mag function.
Good and quality videos in your channel and still low amount of views and subscribers. I feel your pain, but keep up the good work.
Cheers from Hungary!
How does this gun do in medium to longer ranges? Really like the look and recoil aspect of it. Thanks a lot!
You can use this replica in all kinds of ranges, from CQB to woodland environments
They say on their website they recommend the 11.1 Titan lion battery for this gun, I see you have a 7.4... do you think perhaps it can't handle the 11.1? I don't want to damage my new one! :)
It absolutely can, I'm running a 11.1 35a 2500 capacity battery and never had an issue while I was stock.
Probably 7000-10000 bbs before I upgraded it :)
@@WooHooLadttv Thanks for the reply dude, how come you upgraded? :)
@Chewy In the video we've used a 7.4V for demonstration purposes. The replica can handle a 11.1V battery, but keep in mind that those batteries increase wear of internal parts. So to increase the lifespan of the replica and its original parts, a 7.4V might be better. If you want to achieve a better trigger response and a higher rate of fire, then go with the 11.1V.
@@krale-airsoft4177 Thanks for the reply i'll get both and see if the trigger feels awful on 7.4 :)
@krale-airsoft4177 how do you recommend 9.6v?
Hello which hop units is best for T10 I was thinking for Maxx ho up. Are they compatible
The hopups from these replicas are propietary, you can't use aftermarket hopups in these.
So this is pretty much like my regular KWA RM4 ERG.
Can i remove the flashider? And if, how?
Yes, you can. There's a small grub screw located on the flash hider that needs to be loosened first, after which you can twist it off. This takes a fair amount of force/strength, as it's secured with loctite. So be mindful of that.
@@krale-airsoft4177 thank you so much!
Wil je weer Nederlandse video’s maken?
We hebben een wereldwijde klantengroep, daarom hebben we gekozen over te stappen naar Engels.
Ordered this gun and 2 others. The money left my account but your website instantly told me the order has been cancelled.
I will come back and edit this comment when this has been resolved.
Hello which hop units is best for T10 I was thinking for Maxx ho up. Are they compatible
The hopups from these replicas are propietary, you can't use aftermarket hopups in these.