No one ever talks about getting the files. I started 3D printing with an old mac. It just didn't have enough grunt to render some models at all and if I had too much on the virtual print bed, it really struggled. I just happened to upgrade to a new PC and it made a world of difference.
@Phase10Minecraft as someone who’s looking to go into 3D printing myself. What printer would work with my MacBook best? And what software is compatible with most 3D printers? That’s the part I’m still confused on because I’m looking on Amazon for one around 200$
You mentioned that FDM typically takes longer because it tends to be larger prints, there is also a second reason. Since resin printers print the entire layer at once, the print time is based on the number of layers only. With FDM, it is based on the total volume of the print, so 3 identical soldiers printed all at once on a resin bed takes the same length of time as 1 of those soldiers, but takes (approximately) three times as long on an FDM printer as 1 does.
Fantastic point. I'm thinking with Resin it's best to have a dedicated room or space due to the chemicals and such, where FDM you can have it on a kitchen table when in use and not worry about cats and things as much.
@@kairon156 I would still be worried about cats and such. Some people believe that FDM will still release fumes but even if it doesn't the bed and hot end are burn concerns assuming the animals don't eat the filament first.
@Alex Wolfiecat enclose the printer in plexi and filter the air with some kind of active charcoal filter. ideally then put it out the window if you can. i've been thinking about it and that's my best idea.
This format was outstanding! Well done! The conversational tone and candid answers was refreshing! I also support a “part 2” with a post printing focus. I have an elegoo 2pro sitting in its box as I try to navigate “slicing” and supports, and stuff. Thank you for making this!
Best video i've seen on 3D printing so far. Appreciate the insight Danny! Timestamp list for all of you speed demons out there: 1:16 What can you make with a 3D Printer? Mini's/Terrain? 1:54 What do I need to get started? 2:13 What Printer should I buy? (leads into) 2:55 What are the types of 3D Printers? 3:27 FDM Printers 3:59 Resin Printers 4:45 Which one is best for me? 4:59 FDM Printers Cont... 5:30 Resin Printers Cont... 6:40 Potential *risks* with Resin Printers 8:04 What if I want to print terrain AND mini's? (What do you want to print the most of?) 9:45 How do I know which specific model of printer to get? 10:24 How to find the right printer? (Communities, Discord, Reddit etc...) 12:16 buying printers from Amazon 12:55 buying printers from your Local Stores 13:10 More international options 13:35 Do I need tools to get started? 14:06 Exceptions to not needing tools 14:28 Upgrades for your printer 16:17 Supporting the channel
I don’t typically comment on videos, but I gotta say.. not only was your video informative, but I very much like how you went about it. I’m in the first stages of looking into 3d printing for miniatures and small terrain additions, and you confirmed what I’ve been leaning towards. Thank you for the information and keep up the great work!
i feel like you should have talked about post print processes more also, FDM is print and done, but resin you have to clean and harden the print before its ready for paint , alot more work
Totally agree with you, Danny and I will be making a Part II to this video, which includes assembly, slicing, printing problems, and definitely clean up!
@@matso3856 you have to wash and cure resin, it's a must. However you can wash them in a bucket with either water or alcohol depending on the resin, and can set then outside to cure. The stations just make it easier
Fdm Is a lot simpler in the post process. But FDM troubleshooting is a whole nother beast compared to resin. Also Resin has a lot less risk of burning your house down. Pros and Cons to both.
Awesome advice! There's something nostalgic about a new 3D Printed Tabletop video coming out. It's like looking at Christmas photos of your childhood and reminiscing over all the toys you always loved. You got me started in printing, like 3 years ago. So glad you still find time to contribute on UA-cam. It's amazing how for you and your business has come.
I believe it's worth mentioning you CAN 3D print large figures in a resin printer because a lot of the models for the figures often come in pieces to be assembled. Because I didn't know that I went and bought a filament printer and partially been regreting it. In my honest opinion if really high quality prints is your absolute top priority and are willing to pay accordingly just get one of the larger 3d resin printers like the Saturn or Photon Mono X.
Amazing point I was thinking that as I’ve been doing tons of research and want to print BJDs, ppl print the larger scale ones in parts since they come in parts anyway.
Really good reasonable introduction. I’d only add: •Miniature design can make the difference. Read the descriptions of some models you might like to print and they should say what are the largest model sizes in the collection, and whether they are optimized for FDM (which also should work in resin) or if they are intended for resin and not recommended for FDM. FDM is great but it just can’t handle really dynamic poses as well. •There are good honest UA-cam reviewers, but another reason to be wary of UA-cam reviews at first is the proliferation of channels simply gushing over whatever printer they just got sent for free, even if they haven’t actually used it very long, angling for their next free gift.
Just wanted to pop into the comments and say that this is one of the best basic instructional on how to approach 3d printers - I have watched about 30 vids so far that are mainly focused on reviews... and not what I want to print and how to print. So love love love this video! Just want to say thanks again!
I'm getting my first 3d printer from a new friend I made. Tihs conversation mimics the one we had almost mirror for mirror. I can't wait to get started with printing and fabricating!
Something to remember. Fdm’s are very hobbish. You play with leveling, new parts, replace something here and there. Now I love that part. Being able to break it down and rebuild it if I need to.
This is the first video I clicked and the best! I love the no BS simple format you chose. You covered a lot and it was very easy to understand! Thanks!
I'm a first time DM (long time player) who spends several hours drawing maps for each session, and I'm looking to upgrade from dice to represent creatures to match the quality of the playspace. This was a super helpful and easy to comprehend format and really helped narrow down my options!
This video was super helpful. All the info is very much appreciated. I’m looking to buy a 3D printer for my 11 year old daughter for Christmas. I was super overwhelmed and had no idea where to start. It just sounded scary and difficult but you’ve cleared a lot up and have so much helpful information. I feel a lot better with the information and advice you’ve given. Thanks so much
Im building an n scale train layout and you helped me make the choice. i have watched and read a bunch of stuff but you sir nailed it. opening amazon now thank you.
A friend of mine pointed me to this video. I've been considering a 3D printer for some time and thanks to you I've decided to go with a Mars Pro 2 since I want to do mostly miniatures and maybe some dice.
Subscribed for the positive energy and the great info, really appreciated the format and your friendly helpful attitude. Really felt like we were just two buddies talking in the garage, gave me the warm and fuzzies
My pleasure! We'll have a follow-up that is the natural next part about beginner steps after you order your first printer. We're working on it as quickly as we can - hopefully it helps!
As someone looking at getting into 3D printing thank you for doing a "what you need to know/consider" instead of the normal "this is what you need to buy" video
thinking about getting a 3d printers (my first) this video helped a lot now I know that I will probley gonna need a fdm because i plan to make suits and pieces to armor, love the vid
I do believe this was the perfect video to find I don't have the money to get one yet but I am interested been wanting to for a while now and when I get the money and I believe I'll take the plunge into 3D printing thank you for the amazing video
Speaking as someone who started with FDM for terrain, I was surprised to learn how much nozzle size affects the print. I've gotten really good results with a 0.25mm nozzle and .07mm layer height. Wish you'd have touched on that. *Edit: What I mean is good results printing some minis using these settings. It still requires dialing in the filament, lots of patience with supports, and it doesn't do well with tiny details. You will, however, get a lot more details than with a .4mm nozzle!
This is a great video. I'm thinking about getting a 3D printer in the near future and didn't know where to start. This was my first stop. I liked the way you explained the differences and the format of the video where you and your camera man interacted. This connected well with the lingo you presented. The subs were great because I couldn't hear the camera man very well.
i was quite lost on the options and use cases that all printers have.. and non of the videos i have watch solved that.. but.. after your video im kind of relaxed and motivated to buy a printer.. so thx so much for it and keep the great content and energy on your videos !
Wow, thank you. I was leery, clicking on this video. Your start off was a bit tame, but as you got into it, I was hooked. Again, thank you very much for all the info. Absolutely, super useful.
fairly new to this 3d printing stuff, moreover I just gotta compliment how soft your voice is like wtf so calming while learning a lot but not calming enough to make me fall aslep
I know your videos, not the newest, but I’m sure a lot of it still stands today. I am a newbie never had a 3-D printer. I am in the RC rock, crawling hobby, and having a 3-D printer would be a blessing! But the sad most part would need to be fairly strong. Except for the tire inserts. Hard time deciding on my first printer. Thanks for your time spent explaining printers.
Great video, I am looking to getting a 3D printer in the next 6 mos. and have done a load of research. I have been watching you awhile and I am glad to have you reaffirm what I learned.
🎁 Uncharted Lands Late Pledges: 3dpt.me/uncharted-late-pledge ⚠ Pick up Previous Late Pledges: 3dpt.me/late-pledges 🏆 Become a Patron: 3dpt.me/support What tips do you have for folks choosing their first 3D printer(s)?
I'd second your suggestion of seeing recently made prints and which printers made them. I'd recommend getting a printer that other people have, because it'll be easier to find feedback when you're having an issue or 3D printable upgrades! Great video Danny!
yo thank you for this. your both good people. I did not know anything about 3D printers and now I'm 40% positive I can find a great 3D printer in the next few weeks. thanks again. I will subscribe save and notify button your channel, and buy one of your t-shirts bro.
Love your videos, I bought a creality ender 3 pro last year. It has been very good to me and your videos were a great resource that helped influence my purchase and begin my 3D printing journey. Thanks for all you do.
Didn’t believe you ate the beginning when you told that you are actually gonna explain some things like a store buddy. Well you did. Thanks for the video :)
Great video! I'm now curious to know about the "software" side of 3D printing now. For example, which software do you use (Solidworks, etc.)? Do certain 3D printer brands have their own proprietary software? Is software completely separate and I have to buy it myself? If so, which softwares are the best to use? Basically, could I get the rundown on how software is chosen (not necessarily how it's used) and how it is then processed to physical 3D printer?
So far This video is the BEST ! most helpful for me, The way you talk is just really click and make sense. Truly thank you. Now time to make Banana's Link !
Just saw this today. We already have a 3d printer that is collecting dust My sons have recently discovered D&D and want to print figures. Thank you for your insight and solid information. You've won over a new subscriber today.
just ordered my Ender 3 v2 here in Australia. Looking forward to getting started. Thanks for all your helps tips and insights that got me started. Resin isn't right for me just yet, haven't the space with proper ventilation in my 4 room apartment so that's for later. Thanks again!
FDM is good for prototypes/practical bits too; made a replacement part for my mom's sewing machine, little legs for a coffee maker, painting pylons I found on thingiverse. If I could get/make a decent enclosure for my printer I might try ABS again, which is some pretty solid stuff like Lego plastic if I recall correctly.
@@3DPrintedTabletop I appreciate the reply! Been watching some of your videos and it's got me seriously considering a resin printer at some point for prettier minis and decorative doodads. You seem like a good guy and a positive influence for prospective and active print hobbyists alike. Cheers.
Great use for FDM would also be dungeon wall sets, tiles, anything without high detail required. I disagree, that FDM are slow, depends on the printer. I feel some FDM printing can be MUCH faster than SLA, depending on the size of the print. Ive printed mini's in 15-20 minutes on an FDM, while a resin can take 2 hours for same print. You can also increase details of low quality fdm prints by hand. Although resin is getting faster, the newest ones are cutting that 2 hours into 30 minutes if you get one with a mono screen. Resin is also very dangerous, highly toxic. PLA is plant based. Eco Safe.
Yes, that is I am fascinated by FDM printers. They are extremely practical and versatile. I still have not decide on an FDM printer to purchase yet however
I would like to get into 3D printing to make action figures that haven’t been made yet? Where do I start? I’m rather young! I also love your energy and engagement, I really enjoyed the editing style aswell! Have a lovely day/night and thank you I feel more knowledgeable now!
While I'm not a beginner, I watched this video because Danny always does great and informative videos and this is another jewel for beginners. One thing I'd like to mention is beginners learn CAD at the same time. After you make a Rook and a Benchy, What's next? While you can buy lots of STL files, It's a real blast to design your own or Mod a premade. Want a Wizard with a chicken head on his staff? Just like printing, CAD takes learning so I'd suggest doing both at the same time.
Great video! It would be worth mentioning also the FDM prints are typically much sturdier than resin prints. As a minivan driver, my FDM terrain withstands my kids much better than my resin minis. 😁
As someone that just did this like 4 months ago (and went with both an FDM and Resin printer). I would suggest picking one. 3d printing is an entire hobby in itself. Take it slow. Also, I highly suggest going for the upgraded version of FDM printers. I went with a CR-10 and exactly 1 print later absolutely realized I should have bought the v2. I ended up buying all the upgrades and I’m still waiting on some to arrive so I can install them. Should have bought the pre upgraded version. That said its not without its positives, I get to learn as I install these which I am looking forward to. Finally.... UPGRADE THE PTFE TUBE! Seriously, the stock one in most of these FDM printers suck. Its a super cheap upgrade and make sure you buy the one that comes with the proper clippers. Keep up the great work, love the channel! You are an inspiration.
You can't buy a prusa on Amazon, but I have had so many fewer problems on my Mini+ than my friends on all the ender 3 versions. If you don't mind the shipping costs and the wait, Prusa is definitely worth considering.
@@Limitedarkness They're fine. If your primary interest is minis, get a resin printer. 10x the resolution. I can make okay looking minis, it's just annoying to do supports for them.
What kind would be used to make replacement parts for hard to find auto and motorcycle parts? A side panel for a motorcycle would have to be smooth with no lines and flexible.
I'm thoroughly enjoying your videos, thank you. I'll be starting on this hobby in the New Year, and am looking forward to playing around & developing my skills! Thanks again!
So I like resin printers. I know a lot of people have safety concerns and talk about issues. But I haven't experienced them. For me, there are some upgrades that are essential and super cheap for resin printing and make a huge QOL difference.: 1) Flexplate. Way better than that metal spatula. and you won't have to risk scratch the build surface. Also if you get a pair of them you can start printing a second print almost as soon as the first print finishes. 2)Drip adaptor. Something so that after the print finishes allows you to hang the build plate so the excess resin can drip off. 3) Handles for the plastic lids/enclosure/whatever you call it. Honestly not sure why this doesn't come by default 4) Syphon Pump for transferring the IPA or cleaning solution with minimal spills and drippage. Mind you this is like maybe $40 of upgrades that just make printing so much easier
Thanks for the video. I definitely think I made the right decision purchasing my tender 3 FDM first as it has given me a real feel for the hobby. Now that my children are asking for more little figurines and things like that, I’m going to invest in a cheap little resin printer.
i love the honesty in saying to see what knowledge you gain from being in the community rather than just looking at every 3d printer review on youtube even though you literally are a 3d printer reviewer sometimes! this video feels like the perfect thing to get someone started in looking for their own 3d printer since its just so relaxed, honest, and clear i think the question i would have is how tough is it REALLY to clean up fdm prints to have a nice finish? i lean towards an fdm printer since it seems more like the right thing for me and i wouldnt really be bothered with layer lines on things like props or terrain but for something like a mini i would probably want to clean it up a little bit so they can look really nice (-:
Watching Danny's videos got me started with an FDM printer and yes I was able to print some minis. But I wasnt happy with the prints and for me the FDM printer is much more of a pain in the arse to use. I love pre-supported minis and have all of Danny's kickstarters! The resin printer, I was scared to get thinking it to be a big mess, or smelly or hard to do and I LOVE it! The minis are amazing looking! and I have printed lots of small terrain pieces as well. FDM for lots of terrain pieces and minis I would get those little fish poops (the pieces on the underneath that didnt connect together and it looks like my terrain piece was swimming around and pooped a little bit of terrain :/ they arent too hard to cut off but it definately makes the piece not look nice and is a pain to fix it.
This video was fantastic! I am not a gamer but, I have for a long time wanted to maybe get into 3D printing just to tinker around and make a few odd objects. I enjoyed listening to your info, and your suggestions on all the different routes a person can take to get started in this hobby. You were very informative and very entertaining to listen to, so much so that I liked, and Subscribed just to get some more info from you in the future. It's people like you that make the Quality of life better for others, keep up the good work and the motivation to help others. Thank You!!!
First 3d printing video I've seen so far, great video, thanks. Subbing to your channel. What about software and prints? I'm gonna jump down the rabbit hole now. Thanks again
UA-cam for Knowledge, and I started with an original Ender 3. The first things I printed were upgrades for the printer itself. I now have fan cowls, light mounts, drawers, raspberry pi mount, etc. Now I'm branching out to printing toys for my little one learning about tweaking settings in my slicer. I believe my next step is minis for my D&D game, and it sounds like I may have to pick up a resin printer for that.
The running cost is different between resin and FDM printing too. FDM you kind of just need a roll of filament and you're set. With resin you need IPA, gloves etc and you need to cure it in a UV "oven". Just something to keep in mind.
Love this format. As an absolute beginner I found it an ideal way to start the process. My preference would be resin, but I’m sure they come a whole host of issues too. Looking forward to more.
Hey man this video really helped me understand the basics of the differences between printers and I really wanted to thank you. Even for someone like me, who is not going to use the 3d printer for tabletop gaming but wants to use it for other projects.
Danny you are solely responsible for me even considering pulling the trigger on an Ender 3 V2. I love DMing and I’ve always found 3D printing to be so interesting, so know every time you release a new video you are making one step closer to finally take the plunge.
Thank you..thinking about getting my family our first printer so at least now i know where to start educating myself before i buy..i dont want to get something i will not like or not be happy with the types of printing we can do..now i have work to do
Hi Danny. Thanks for all the great videos and advice for those of us that are new to the hobby. I bought a CR10 mini as my first printer about a year and a half ago (to go with your Lost Adventures Kickstarter), and now the resin calls to me. The question I have is about using my printer and future resin printer in the garage. Indoor space is limited as is, and I’m not sure I want the resin fumes in the house with my family. I live in Southern California where temperatures in the garage can be regularly in the 90’s much of the year to well over 100 degrees in summer. The colder months of the year might drop overnight to the low 40’s, but usually in the 50’s and 60’s. Humidity isn’t usually a big concern. I can’t imagine these temperature ranges can be good for printing, but figured I would get your insight. What sort of impact would this have on the machines and the prints themselves? The uncertainty about this is really the main thing holding me back from that resin purchase at the moment.
No one ever talks about getting the files. I started 3D printing with an old mac. It just didn't have enough grunt to render some models at all and if I had too much on the virtual print bed, it really struggled. I just happened to upgrade to a new PC and it made a world of difference.
how do you get files?
2nded
3rd. Not only "get" files, but also make your own for things not "get-able".
@@AceBoy2099 Spot on!... I don't want to print predefined stuff😜
@Phase10Minecraft as someone who’s looking to go into 3D printing myself. What printer would work with my MacBook best? And what software is compatible with most 3D printers? That’s the part I’m still confused on because I’m looking on Amazon for one around 200$
You mentioned that FDM typically takes longer because it tends to be larger prints, there is also a second reason. Since resin printers print the entire layer at once, the print time is based on the number of layers only. With FDM, it is based on the total volume of the print, so 3 identical soldiers printed all at once on a resin bed takes the same length of time as 1 of those soldiers, but takes (approximately) three times as long on an FDM printer as 1 does.
Fantastic point. I'm thinking with Resin it's best to have a dedicated room or space due to the chemicals and such, where FDM you can have it on a kitchen table when in use and not worry about cats and things as much.
@@kairon156 I would still be worried about cats and such. Some people believe that FDM will still release fumes but even if it doesn't the bed and hot end are burn concerns assuming the animals don't eat the filament first.
Okay nerd
@Alex Wolfiecat enclose the printer in plexi and filter the air with some kind of active charcoal filter. ideally then put it out the window if you can. i've been thinking about it and that's my best idea.
@Alex Wolfiecat fdm with pla doesnt make any smell.
This format was outstanding! Well done! The conversational tone and candid answers was refreshing! I also support a “part 2” with a post printing focus. I have an elegoo 2pro sitting in its box as I try to navigate “slicing” and supports, and stuff. Thank you for making this!
Best video i've seen on 3D printing so far. Appreciate the insight Danny!
Timestamp list for all of you speed demons out there:
1:16 What can you make with a 3D Printer? Mini's/Terrain?
1:54 What do I need to get started?
2:13 What Printer should I buy? (leads into)
2:55 What are the types of 3D Printers?
3:27 FDM Printers
3:59 Resin Printers
4:45 Which one is best for me?
4:59 FDM Printers Cont...
5:30 Resin Printers Cont...
6:40 Potential *risks* with Resin Printers
8:04 What if I want to print terrain AND mini's? (What do you want to print the most of?)
9:45 How do I know which specific model of printer to get?
10:24 How to find the right printer? (Communities, Discord, Reddit etc...)
12:16 buying printers from Amazon
12:55 buying printers from your Local Stores
13:10 More international options
13:35 Do I need tools to get started?
14:06 Exceptions to not needing tools
14:28 Upgrades for your printer
16:17 Supporting the channel
I don’t typically comment on videos, but I gotta say.. not only was your video informative, but I very much like how you went about it. I’m in the first stages of looking into 3d printing for miniatures and small terrain additions, and you confirmed what I’ve been leaning towards. Thank you for the information and keep up the great work!
i feel like you should have talked about post print processes more also, FDM is print and done, but resin you have to clean and harden the print before its ready for paint , alot more work
Totally agree with you, Danny and I will be making a Part II to this video, which includes assembly, slicing, printing problems, and definitely clean up!
@@ajdecaprio Is there only upgrades for FDM ?
is wash & cure stations a must have or just fancy extra ?
@@matso3856 you have to wash and cure resin, it's a must. However you can wash them in a bucket with either water or alcohol depending on the resin, and can set then outside to cure. The stations just make it easier
Fdm Is a lot simpler in the post process. But FDM troubleshooting is a whole nother beast compared to resin. Also Resin has a lot less risk of burning your house down.
Pros and Cons to both.
Information that should have been presented at the end of the video. Thanks for sharing those details.
Awesome advice! There's something nostalgic about a new 3D Printed Tabletop video coming out. It's like looking at Christmas photos of your childhood and reminiscing over all the toys you always loved. You got me started in printing, like 3 years ago. So glad you still find time to contribute on UA-cam. It's amazing how for you and your business has come.
Thank you so much for being here from the beginning, Don. I appreciate it so much!
Same story here! I bought an ender 3 AND started playing d&d because Danny! It been a blast!
@@3DPrintedTabletop he man the print at 3.49 looks absolutely insane for a FDM printer, can you tell us how you got that clean af result
I believe it's worth mentioning you CAN 3D print large figures in a resin printer because a lot of the models for the figures often come in pieces to be assembled. Because I didn't know that I went and bought a filament printer and partially been regreting it. In my honest opinion if really high quality prints is your absolute top priority and are willing to pay accordingly just get one of the larger 3d resin printers like the Saturn or Photon Mono X.
Amazing point I was thinking that as I’ve been doing tons of research and want to print BJDs, ppl print the larger scale ones in parts since they come in parts anyway.
Really good reasonable introduction. I’d only add:
•Miniature design can make the difference. Read the descriptions of some models you might like to print and they should say what are the largest model sizes in the collection, and whether they are optimized for FDM (which also should work in resin) or if they are intended for resin and not recommended for FDM. FDM is great but it just can’t handle really dynamic poses as well.
•There are good honest UA-cam reviewers, but another reason to be wary of UA-cam reviews at first is the proliferation of channels simply gushing over whatever printer they just got sent for free, even if they haven’t actually used it very long, angling for their next free gift.
Just wanted to pop into the comments and say that this is one of the best basic instructional on how to approach 3d printers - I have watched about 30 vids so far that are mainly focused on reviews... and not what I want to print and how to print. So love love love this video! Just want to say thanks again!
I'm getting my first 3d printer from a new friend I made. Tihs conversation mimics the one we had almost mirror for mirror. I can't wait to get started with printing and fabricating!
Something to remember. Fdm’s are very hobbish. You play with leveling, new parts, replace something here and there. Now I love that part. Being able to break it down and rebuild it if I need to.
This is the first video I clicked and the best! I love the no BS simple format you chose. You covered a lot and it was very easy to understand! Thanks!
I’m buying my first 3-D printer tomorrow.And I honestly think this guy has been the most help in figuring out what I want to get. Thanks Danny!
You are most welcome, Jake! Good luck with your printer!
Thank you for this rundown, I don't comment on videos very often, but the way this video flowed and the "conversational" style is great... Kudos!
I'm a first time DM (long time player) who spends several hours drawing maps for each session, and I'm looking to upgrade from dice to represent creatures to match the quality of the playspace. This was a super helpful and easy to comprehend format and really helped narrow down my options!
A quality presentation. Keeping it simple and real. Keep up the great format. This is the best of what UA-cam should be..
This video was super helpful. All the info is very much appreciated. I’m looking to buy a 3D printer for my 11 year old daughter for Christmas. I was super overwhelmed and had no idea where to start. It just sounded scary and difficult but you’ve cleared a lot up and have so much helpful information. I feel a lot better with the information and advice you’ve given. Thanks so much
My pleasure, Jonathan!
I'm in the same boat with my 12 year old son. Just want to get what makes sense for a 12 year old beginner
@@sportakiss888 I am that 12 year old boy looking for a 3d printer when I turn 13
@@darkstar2682 same
Your kids can use auto cad?? Now that's impressive.
Im building an n scale train layout and you helped me make the choice. i have watched and read a bunch of stuff but you sir nailed it. opening amazon now thank you.
A friend of mine pointed me to this video. I've been considering a 3D printer for some time and thanks to you I've decided to go with a Mars Pro 2 since I want to do mostly miniatures and maybe some dice.
Subscribed for the positive energy and the great info, really appreciated the format and your friendly helpful attitude. Really felt like we were just two buddies talking in the garage, gave me the warm and fuzzies
I was just thinking about going through your catalog for beginner info and advice (to compile for a friend). How timely! Thanks so much!
My pleasure! We'll have a follow-up that is the natural next part about beginner steps after you order your first printer. We're working on it as quickly as we can - hopefully it helps!
I was literally doing the exact same! Thank you so much for this!
As someone looking at getting into 3D printing thank you for doing a "what you need to know/consider" instead of the normal "this is what you need to buy" video
thinking about getting a 3d printers (my first) this video helped a lot now I know that I will probley gonna need a fdm because i plan to make suits and pieces to armor, love the vid
This content is just great! The conversation style, easy to follow comparisons and no big shouty hype with bias. Just smooth, funny and informative ❤️
I do believe this was the perfect video to find I don't have the money to get one yet but I am interested been wanting to for a while now and when I get the money and I believe I'll take the plunge into 3D printing thank you for the amazing video
Speaking as someone who started with FDM for terrain, I was surprised to learn how much nozzle size affects the print. I've gotten really good results with a 0.25mm nozzle and .07mm layer height. Wish you'd have touched on that.
*Edit: What I mean is good results printing some minis using these settings. It still requires dialing in the filament, lots of patience with supports, and it doesn't do well with tiny details. You will, however, get a lot more details than with a .4mm nozzle!
This is a great video. I'm thinking about getting a 3D printer in the near future and didn't know where to start. This was my first stop. I liked the way you explained the differences and the format of the video where you and your camera man interacted. This connected well with the lingo you presented. The subs were great because I couldn't hear the camera man very well.
Great video. I have been 3d Printing for a few years now and feel this video is awesome for people who may be confused. Great job.
i was quite lost on the options and use cases that all printers have.. and non of the videos i have watch solved that.. but.. after your video im kind of relaxed and motivated to buy a printer.. so thx so much for it and keep the great content and energy on your videos !
Wow, thank you. I was leery, clicking on this video. Your start off was a bit tame, but as you got into it, I was hooked. Again, thank you very much for all the info. Absolutely, super useful.
Great video! Can I just say I love the way you talk, it’s nice to find a UA-camr that isn’t screaming at me the nanosecond I click on the video🙏
Good Afternoon. I know you posted this just about a year ago, but this so far was the best video explaining 3D printing to me. Thank you.
fairly new to this 3d printing stuff, moreover I just gotta compliment how soft your voice is like wtf so calming while learning a lot but not calming enough to make me fall aslep
Joining and reading community posts is a really good tip. Instead of just watching youtube reviews.
First research I've looked at and he says to stay away from UA-cam 🤣 good thing he's super informative! Great content
Superb video! I came in knowing nothing and now I feel more confident in jumping into the hobby!
Great video! I saw this 3 hours after getting my first 3d printer. Thanks for introducing me to a cool new hobby.
I know your videos, not the newest, but I’m sure a lot of it still stands today. I am a newbie never had a 3-D printer. I am in the RC rock, crawling hobby, and having a 3-D printer would be a blessing! But the sad most part would need to be fairly strong. Except for the tire inserts. Hard time deciding on my first printer. Thanks for your time spent explaining printers.
Awesome advice 🙏 Love the relaxed friendly style of these videos 👌
Great video, I am looking to getting a 3D printer in the next 6 mos. and have done a load of research. I have been watching you awhile and I am glad to have you reaffirm what I learned.
🎁 Uncharted Lands Late Pledges: 3dpt.me/uncharted-late-pledge
⚠ Pick up Previous Late Pledges: 3dpt.me/late-pledges
🏆 Become a Patron: 3dpt.me/support
What tips do you have for folks choosing their first 3D printer(s)?
I'd second your suggestion of seeing recently made prints and which printers made them. I'd recommend getting a printer that other people have, because it'll be easier to find feedback when you're having an issue or 3D printable upgrades!
Great video Danny!
I'm looking at getting into 3D printing FOR D&D stuff, this is EXACTLY the content I was looking for! Insta-subscribed. Good vibes.
yo thank you for this. your both good people. I did not know anything about 3D printers and now I'm 40% positive I can find a great 3D printer in the next few weeks. thanks again. I will subscribe save and notify button your channel, and buy one of your t-shirts bro.
Love your videos, I bought a creality ender 3 pro last year. It has been very good to me and your videos were a great resource that helped influence my purchase and begin my 3D printing journey. Thanks for all you do.
what a nice relief to find your vid, super helpful dude! thank you so much
Him: I'd wait for UA-cam until you're a little more comfortable and knowledgeable
Me who came straight to UA-cam: 😯
Didn’t believe you ate the beginning when you told that you are actually gonna explain some things like a store buddy. Well you did. Thanks for the video :)
Hello everyone,I was worried about my own doubts on how to start, this is totally helpful. Thank you .
Great video! I'm now curious to know about the "software" side of 3D printing now. For example, which software do you use (Solidworks, etc.)? Do certain 3D printer brands have their own proprietary software? Is software completely separate and I have to buy it myself? If so, which softwares are the best to use? Basically, could I get the rundown on how software is chosen (not necessarily how it's used) and how it is then processed to physical 3D printer?
Someone answer this question! 😬
@@bethanypierce4944 I know right
Software for the printer itself is free I myself use the cura slicer
As for 3D design I think everything works
Use maya, 3D max or blender
I personally use prusa slicer and for 3d modeling I use blender
So far This video is the BEST ! most helpful for me, The way you talk is just really click and make sense. Truly thank you. Now time to make Banana's Link !
Yessssss so stoked to see this video! Perfect to point beginners to, I’m sure it will come in handy!
Just saw this today. We already have a 3d printer that is collecting dust My sons have recently discovered D&D and want to print figures. Thank you for your insight and solid information. You've won over a new subscriber today.
just ordered my Ender 3 v2 here in Australia. Looking forward to getting started. Thanks for all your helps tips and insights that got me started. Resin isn't right for me just yet, haven't the space with proper ventilation in my 4 room apartment so that's for later. Thanks again!
FDM is good for prototypes/practical bits too; made a replacement part for my mom's sewing machine, little legs for a coffee maker, painting pylons I found on thingiverse. If I could get/make a decent enclosure for my printer I might try ABS again, which is some pretty solid stuff like Lego plastic if I recall correctly.
Great use case too! My channel is geared towards folks who play tabletop games, but this is definitely true. Thanks for the comment!
@@3DPrintedTabletop I appreciate the reply! Been watching some of your videos and it's got me seriously considering a resin printer at some point for prettier minis and decorative doodads.
You seem like a good guy and a positive influence for prospective and active print hobbyists alike. Cheers.
Great use for FDM would also be dungeon wall sets, tiles, anything without high detail required. I disagree, that FDM are slow, depends on the printer. I feel some FDM printing can be MUCH faster than SLA, depending on the size of the print. Ive printed mini's in 15-20 minutes on an FDM, while a resin can take 2 hours for same print. You can also increase details of low quality fdm prints by hand. Although resin is getting faster, the newest ones are cutting that 2 hours into 30 minutes if you get one with a mono screen.
Resin is also very dangerous, highly toxic. PLA is plant based. Eco Safe.
Yes, Lego are made from ABS, not the clear ones, I don't recall what they are made of, but most opaque ones are ABS
Yes, that is I am fascinated by FDM printers. They are extremely practical and versatile. I still have not decide on an FDM printer to purchase yet however
Loved the video, and yes the analogy of the car perfectly describes my 3D printer purchasing journey
i am a complete noobie when it comes to ed printing and this video is really helpful
I would like to get into 3D printing to make action figures that haven’t been made yet? Where do I start? I’m rather young! I also love your energy and engagement, I really enjoyed the editing style aswell! Have a lovely day/night and thank you I feel more knowledgeable now!
Excellent video. Great information with little to no beating around the proverbial bush...
Thanks 😎👍
I’m going to be 76 next month Andi want to get into 3D printing, and this video was great.
While I'm not a beginner, I watched this video because Danny always does great and informative videos and this is another jewel for beginners. One thing I'd like to mention is beginners learn CAD at the same time. After you make a Rook and a Benchy, What's next? While you can buy lots of STL files, It's a real blast to design your own or Mod a premade. Want a Wizard with a chicken head on his staff? Just like printing, CAD takes learning so I'd suggest doing both at the same time.
Great video! It would be worth mentioning also the FDM prints are typically much sturdier than resin prints. As a minivan driver, my FDM terrain withstands my kids much better than my resin minis. 😁
He seems so calm and collected. Unnervingly so. Almost like the guy who's shooting may actually be in the resin now.
As someone that just did this like 4 months ago (and went with both an FDM and Resin printer). I would suggest picking one. 3d printing is an entire hobby in itself. Take it slow.
Also, I highly suggest going for the upgraded version of FDM printers. I went with a CR-10 and exactly 1 print later absolutely realized I should have bought the v2. I ended up buying all the upgrades and I’m still waiting on some to arrive so I can install them. Should have bought the pre upgraded version. That said its not without its positives, I get to learn as I install these which I am looking forward to.
Finally.... UPGRADE THE PTFE TUBE! Seriously, the stock one in most of these FDM printers suck. Its a super cheap upgrade and make sure you buy the one that comes with the proper clippers.
Keep up the great work, love the channel! You are an inspiration.
You can't buy a prusa on Amazon, but I have had so many fewer problems on my Mini+ than my friends on all the ender 3 versions. If you don't mind the shipping costs and the wait, Prusa is definitely worth considering.
Can prusa print good looking minis?
@@Limitedarkness They're fine. If your primary interest is minis, get a resin printer. 10x the resolution.
I can make okay looking minis, it's just annoying to do supports for them.
What kind would be used to make replacement parts for hard to find auto and motorcycle parts? A side panel for a motorcycle would have to be smooth with no lines and flexible.
This was THE CUTEST VIDEO FORMAT god I love youtube sometimes, amongst all the filth there's little gems like this ❤️
You’re like the Bob Ross of 3D printing. You’re just such a nice guy
I'm thoroughly enjoying your videos, thank you. I'll be starting on this hobby in the New Year, and am looking forward to playing around & developing my skills!
Thanks again!
I love the variety of your channel, all your video are put together so nicely and are always fun to watch!!
Thank you, Leaf! Also, I gotta credit my editor, AJ, who made this video as great as it is.
I wasn't intending on necessarily printing tabletop stuff but this was still really helpful. Thanks!
So I like resin printers. I know a lot of people have safety concerns and talk about issues. But I haven't experienced them.
For me, there are some upgrades that are essential and super cheap for resin printing and make a huge QOL difference.:
1) Flexplate. Way better than that metal spatula. and you won't have to risk scratch the build surface. Also if you get a pair of them you can start printing a second print almost as soon as the first print finishes.
2)Drip adaptor. Something so that after the print finishes allows you to hang the build plate so the excess resin can drip off.
3) Handles for the plastic lids/enclosure/whatever you call it. Honestly not sure why this doesn't come by default
4) Syphon Pump for transferring the IPA or cleaning solution with minimal spills and drippage.
Mind you this is like maybe $40 of upgrades that just make printing so much easier
Thanks for the video. I definitely think I made the right decision purchasing my tender 3 FDM first as it has given me a real feel for the hobby.
Now that my children are asking for more little figurines and things like that, I’m going to invest in a cheap little resin printer.
i love the honesty in saying to see what knowledge you gain from being in the community rather than just looking at every 3d printer review on youtube even though you literally are a 3d printer reviewer sometimes! this video feels like the perfect thing to get someone started in looking for their own 3d printer since its just so relaxed, honest, and clear
i think the question i would have is how tough is it REALLY to clean up fdm prints to have a nice finish? i lean towards an fdm printer since it seems more like the right thing for me and i wouldnt really be bothered with layer lines on things like props or terrain but for something like a mini i would probably want to clean it up a little bit so they can look really nice (-:
Watching Danny's videos got me started with an FDM printer and yes I was able to print some minis. But I wasnt happy with the prints and for me the FDM printer is much more of a pain in the arse to use. I love pre-supported minis and have all of Danny's kickstarters! The resin printer, I was scared to get thinking it to be a big mess, or smelly or hard to do and I LOVE it! The minis are amazing looking! and I have printed lots of small terrain pieces as well. FDM for lots of terrain pieces and minis I would get those little fish poops (the pieces on the underneath that didnt connect together and it looks like my terrain piece was swimming around and pooped a little bit of terrain :/ they arent too hard to cut off but it definately makes the piece not look nice and is a pain to fix it.
This video was fantastic! I am not a gamer but, I have for a long time wanted to maybe get into 3D printing just to tinker around and make a few odd objects. I enjoyed listening to your info, and your suggestions on all the different routes a person can take to get started in this hobby. You were very informative and very entertaining to listen to, so much so that I liked, and Subscribed just to get some more info from you in the future. It's people like you that make the Quality of life better for others, keep up the good work and the motivation to help others. Thank You!!!
Literally exactly the video I was looking for. Perfect. Thank you.
it was realy helpful for someone that try to buy his first printer so thnx and you got new sub
One of the most helpful 3d printing videos I've watched ever. Thank you
First 3d printing video I've seen so far, great video, thanks. Subbing to your channel. What about software and prints? I'm gonna jump down the rabbit hole now. Thanks again
Absolutely awesome. Calm clear sensible advise. You're a great guy Danny!
Thanks Tom! Always appreciate your comments :) Like the new profile pic by the way.
Thanks for the video! I'm considering getting a resin printer now and jumping into the hobby
UA-cam for Knowledge, and I started with an original Ender 3. The first things I printed were upgrades for the printer itself. I now have fan cowls, light mounts, drawers, raspberry pi mount, etc. Now I'm branching out to printing toys for my little one learning about tweaking settings in my slicer. I believe my next step is minis for my D&D game, and it sounds like I may have to pick up a resin printer for that.
The running cost is different between resin and FDM printing too. FDM you kind of just need a roll of filament and you're set. With resin you need IPA, gloves etc and you need to cure it in a UV "oven". Just something to keep in mind.
Uv oven?
... like the sun?
Love this format. As an absolute beginner I found it an ideal way to start the process. My preference would be resin, but I’m sure they come a whole host of issues too. Looking forward to more.
Hey man this video really helped me understand the basics of the differences between printers and I really wanted to thank you. Even for someone like me, who is not going to use the 3d printer for tabletop gaming but wants to use it for other projects.
Thank you, one of the best guides ,but would be nice to cover resistance,speed etc
Danny you are solely responsible for me even considering pulling the trigger on an Ender 3 V2. I love DMing and I’ve always found 3D printing to be so interesting, so know every time you release a new video you are making one step closer to finally take the plunge.
I started because of Danny and am so happy I did!
This video was very helpful thank you! Also, on a side note, you have a voice that made me instantly want to become your friend lmao
Thank you..thinking about getting my family our first printer so at least now i know where to start educating myself before i buy..i dont want to get something i will not like or not be happy with the types of printing we can do..now i have work to do
Best video on this topic I've seen - by a mile. Thank you.
Thank you so much for the video! I really feel a lot more comfortable purchasing a 3D printer. So excited to get started!!!!
1' min in the video and I like this guy, super friendly
Thanks Fotis!
This was beyond helpful and professional video, thank you!
Thank you, I choose the printer I want. You cleared my choices
thank you for this video great help in our quest in finding a new 3D printer
Oh my gosh!! Thank you!! I have almost made my decision 🤣🤣
My pleasure! Thanks for watching :)
10:22 haha it indeed is 2023 when I'm watching this and so far this video has been extremely helpful!
I just got mines. About to use it today and print a toy or something useful. Wish me luck .
I started with a flsun super racer and i really love it. It is a really good starter printer
Hi Danny. Thanks for all the great videos and advice for those of us that are new to the hobby. I bought a CR10 mini as my first printer about a year and a half ago (to go with your Lost Adventures Kickstarter), and now the resin calls to me.
The question I have is about using my printer and future resin printer in the garage. Indoor space is limited as is, and I’m not sure I want the resin fumes in the house with my family. I live in Southern California where temperatures in the garage can be regularly in the 90’s much of the year to well over 100 degrees in summer. The colder months of the year might drop overnight to the low 40’s, but usually in the 50’s and 60’s. Humidity isn’t usually a big concern.
I can’t imagine these temperature ranges can be good for printing, but figured I would get your insight. What sort of impact would this have on the machines and the prints themselves? The uncertainty about this is really the main thing holding me back from that resin purchase at the moment.
resin printers dont like the cold. I notice mine has more failed prints when its cold.
Very informative video, I'm about to jump into 3D printing and this has just answered a lot of my questions so thanks for the honest advise.