Hitec RDX2 1000 The Best Lipo Battery Charger?

Поділитися
Вставка
  • Опубліковано 10 кві 2023
  • If your looking for a high output LiPo Battery charger to get you back out bashing faster than look no further than the hitec rdx2 1000 it can charge up to 450 watts on ac power and up to 1000 on dc power also can change at 20 amps per channel and In parallel it can do 35amps.
    Don't buy a charger that can't meet the needs of the 6s and 8s vehicles
  • Навчання та стиль

КОМЕНТАРІ • 34

  • @pb12echo
    @pb12echo 11 місяців тому

    Nice job on the review, much appreciated!

  • @glenn4452
    @glenn4452 2 місяці тому

    Thanks for the video nice charger going to have to get one of these.

    • @northeastrc73
      @northeastrc73  2 місяці тому

      I’ve had many over the years and I love this one!

  • @jasonwarsalla8692
    @jasonwarsalla8692 4 місяці тому

    Thank you for the review

  • @bradspaugh9827
    @bradspaugh9827 29 днів тому

    Can you revive dead batts wirh it? I have a dead lipo and can not get it to charge even on NiMH. Need to bump start this battery

  • @Paul__FC
    @Paul__FC 5 місяців тому

    That's pretty sweet. I use the RDX1 mini at work for on the clock rips.

    • @northeastrc73
      @northeastrc73  5 місяців тому

      Right on!

    • @jortega61924
      @jortega61924 5 місяців тому

      @@northeastrc73can you link the connectors as to where you purchased them??

    • @northeastrc73
      @northeastrc73  4 місяці тому

      @@jortega61924 to be honest I don’t even remember lol, maybe Amazon 🤷🏻‍♂️

  • @carlwill5009
    @carlwill5009 9 місяців тому

    Yup, I've been doing research between a spectrum charger or this high-tech 1000.

  • @jalee6587
    @jalee6587 22 дні тому

    Best charger and it made directly from a china manufacturer. Its the same as sky rc which is based in shenzhen china. China makes the best hands down. Milwaukee power tools, all apple products . All snap on electronics. China makes the best quality. Tools and electronics.

  • @oside_m5
    @oside_m5 Рік тому

    I just got this charger. Love it so far. Do you know if there is any way to change the storage mode charging voltage on LiPo? It’s 3.80 but my 9500mah 4s batteries say to store at 3.85.

    • @interceptorqc7534
      @interceptorqc7534 Рік тому

      Hi, do you try the charger in DC mode? Does the xt60 from the dc off the charger comed hot?

    • @oside_m5
      @oside_m5 11 місяців тому

      @@interceptorqc7534 I have not tried on DC supply yet

  • @2thextrme
    @2thextrme Рік тому

    Thanks for the video can't find much on this charger till ur video... wanna say
    Im new to all this rc/no prep racing scene I just picked up this charger and now trying to find out what cables I need for my batteries for 1 of my cars so far that is ready to run .. it's a losi mini no prep car I just swapped out the factory controller for a futaba 7pxr controller with 6.6V 2100mAh LiFe Transmitter Battery... and have just got a Hitec Universal Balancing Adapter HRC44178 is there any other cables I need to get my batteries charged for the mini losi and my futaba 7pxr battery ?
    Just trying to figure this out since the hobby shops are over a hr one way from me .... thanks for any help you can give....

    • @northeastrc73
      @northeastrc73  Рік тому

      It all depends on what battery connector your running. I use ic5 connectors and I have made connectors for all my smaller batteries. I also have futaba 7pxr and I have the cable to charge that as well. Take a look in the video how I have my batteries connected. If you need more help you can message me. Glad to help

    • @northeastrc73
      @northeastrc73  Рік тому

      To charge your liFe battery you’ll need a female servo style connector to xt60 to plug into your rdx2 1000 I just found it easier years ago to use the banana style connectors like the ones I showed in video so I can buy any connectors to banana plugs and run them on my rdx2 1000

    • @2thextrme
      @2thextrme Рік тому

      @@northeastrc73 Can you show in a pictures how you have your futaba battery ( I have the futaba ft2f2100bv2 battery ) connected to the hitec rdx2 1000 charger For some reason it won't charge so don't know if I have it connected correctly thanks for any help

    • @northeastrc73
      @northeastrc73  Рік тому

      @@2thextrme message me on my Facebook page I’ll see if I can help

    • @2thextrme
      @2thextrme Рік тому

      @@northeastrc73 do you have a link to your page

  • @interceptorqc7534
    @interceptorqc7534 Рік тому

    Hi, Hi, do you try the charger in DC mode? Does the xt60 from the dc off the charger comes hot?

    • @northeastrc73
      @northeastrc73  Рік тому

      I have not only because when I’m out in the field I use my Solar generator battery bank it’s the EcoFlow max

  • @BlackThunderRC
    @BlackThunderRC 2 місяці тому

    But it's missing one huge thing. You cannot manually calibrate the voltages on it.
    I have the SKY RC version and if id known that before id not have gotten it.
    Besides that good charger for the most part and good review !

    • @northeastrc73
      @northeastrc73  2 місяці тому

      There made by the same company so I guess they had to differentiate it some how.

    • @BlackThunderRC
      @BlackThunderRC 2 місяці тому

      @@northeastrc73 they are the exact same product and have the exact same functionality. So not sure what you mean.

    • @northeastrc73
      @northeastrc73  2 місяці тому

      @@BlackThunderRC yeah I meant the name and color

  • @carlwill5009
    @carlwill5009 9 місяців тому

    Does it charge with 6S

    • @northeastrc73
      @northeastrc73  9 місяців тому

      Yes sir

    • @iflymatt
      @iflymatt 9 місяців тому

      ​@@northeastrc73What the max charge amperage if you were charging a 6s battery?

    • @northeastrc73
      @northeastrc73  9 місяців тому +1

      it will do 20 amps per side but make sure you charge within your c rating@@iflymatt