My new chair slides too much, I guess I have to open the wheels and put some hair there, the hardest part will be convincing my wife to donate some hair.
lol same goes to my sis as well, she does not care of taking care of her hair at anything knowing that his responseble for that but either way i guess she will never learn 🙄
OMG I know this video is old but, THANK YOU SO MUCH FOR THIS VIDEO!! I had my chair for YEARS and I did not even know how much hair could get stuck inside until i turned my chair over just now. Thank you so much!!😦⭐️✨
When everyone else tells me to just replace the damn things, you gave me the courage to actually try and split them apart And I did! And I cleaned them, and they work substantially better now, thank you.
Same as other comments, wanted to pop the casters apart to get the hair off instead of growing old trying to pick it out, but was worried about how much force I was having to use. Your vid gave me the confidence to really put some stank on it and sure enough, pop they did. No damage either. Hair removed, and lubricated with some graphite paste, and reassembled. I also used a blade to scrape the wheel surfaces clean, to get rid of the old ball-mouse "roller rumble". Worked great, helped me keep this old chair in service a bit longer.
One note, I feel like some kind of spreader tool would work a lot better, like the sort used for automotive brake calipers. Cant find any thatd fit tho
I knew I needed to pry apart the two wheels in order to get them to seperate, but I didn't have the guts to go full strength at them untill I watched your video. And voila! they came right off. Thanks!
"That's a lot of gunk" mate I have a golden retriever you haven't seen "a lot of gunk" yet. Thanks for the video. Wasn't aware one could separate the wheel components (these were replacement wheels because the original wheels - surprise - got gunk in them!)
This was sooo helpful. With the aid of your video, the wheels on my office chair got cleaned in 30 minutes, and the chair is gliding along nicely once again. Thank you!!
Some advice to those trying to separate the wheels, use the biggest baddest screwdrivers you got. I used some about the size of my fingers, and really they acted more like wedges to more easily spread them apart, you do have to twist and use force, but thick, wedge-like screwdrivers help a bunch. *edit* Also, I had more success putting the screwdrivers on the same side rather than opposed, and then sorta with a rocking see-saw motion popping them out. I'd try the other method first as this may be more of a risk in breaking the plastic. But it worked for me. Thanks for the video, couldn't find any other source that explained how to spread the wheels apart. Thanks
Thanks for your comment ;) I was toying with the idea of using a couple of cold chisels because of their greater width primarily to lessen the localising of the load and hopefully reduce the risk of breakage, my office chair was $500 and has non-standard diameter shafts where it enters the chair proper. :(
Thanks for your comment, the wheels on mine have never run smoothly since I bought it new :( "perhaps my butt weighs more than some others giving better traction?", so I'm kinda getting away with it. Though you mention "wheel brakes"? I now learn the wheels are designed to have a safety brake feature, when someone is sitting in the chair they run smoothly enough, but when no one is sitting in the chair; they become safety wheel-brakes? but it would be nice if it ran freely. Every success with "fixing" your own, they are really quite nice chairs. /// again your comment, with regard wheel brakes; I just Googled > "ikea office chair wheels not rolling". And it seems these wheels do have some sort of safety auto brake?, perhaps opening up the market for use on ships/cruise liners?. perhaps see also these two URLs ?> ua-cam.com/video/qPoxjKls8gM/v-deo.html ///and/// www.google.com/search?client=firefox-b-d&q=ikea+office+chair+wheels+not+rolling#fpstate=ive&vld=cid:4577205b,vid:9YEBUaV65uk /// Best wishes. John, Perth, Western Australia
I was just not able to remove the wheels. Your video gave me CORRECT way to remove the wheel and clean the castor. It does shoot like a bullet while removing.. Great.
I cant thank you enough! This was amazing!!! Super hard to disassemble the wheels but oh so fantastic. I was about to throw away my chair and now is fixed. Thanks!!! Now just need a new manicure, and a band-aid for a hurt finger 😜
thank you so much! Most comments here sums up the greatness of your tutorial, so I'll add my tweaking: I didn't have any screwdrivers that were thin enough to leverage off the wheels, so I used a pair of thin, dull butter knives to get in there! Got all of the gunk off 👍👍
This video saved me. I recently bought a used chair from someone off Facebook and was quite horrified to see the wheels all clogged up with that person's hair and dirt! I spent a little bit of time trying to tweeze the hair out before realizing there must be a better option. This video saved me so much time and grossness (blech...), thank you so much!!
From the side of the road, I just picked up a Herman Miller 'Ergon' chair, & the only thing that's wrong with it is that the hair has stopped the wheels rolling! Brilliant video explanation. Thank you!
Just found this after buying an old office chair which has the exact same design of caster, completely matted up with someone's hair. Now spinning very freely. Very useful video. Thank you.
There are hair-proof wheels that you can purchase. Hairproofsystem is one of them. I'm not sure how effective they are tbh. I'll be getting one in the future.
Great tutorial! Yes it IS therapeutic! Respect you much for encouraging to remove and clean (fix not replace) as is our way, always. So, to all you out there, you can do this. Its the fourth "R"! (Reuse, Reduce, Recycle AND Restore). Thanks Otway.
THANK YOU SO MUCH!!! This video helped me tremendously! I needed an office chair very badly but didn’t want to pay a lot of money for one because I’ve just moved into a new home and have lots of bills to pay. I found a free one outside by the dumpster of a shop and brought it home and the wheels wouldn’t roll. It must’ve been a craft or sewing shop because it was LOADED with thread! This video save me lots and lots of time and energy. Thank you again and have a blessed day!
Thanks for the video - it not only saved me lot of time, but also facilitated effective cleaning. I was concerned about damaging the wheels of my Godrej swivel chair, but they proved to be quite sturdy to bear the brunt of disassembly.
Apparently The amount off force required had more people in doubt here. Your video gave me the courage to put some extra force behind it. Thanks for your explanation!
Mission accomplished thanks to your awesome video! Would've spent hours with needle-nose pliers, box knife, etc., OR given up and ordered a new set!! Rollers are as good as new in about 15 minutes!!!😏
Thank you very much for this video. This helped me so much. My husband's bedside table have casters and they needed cleaning. I cut the gunk with a pocket knife and used pliers, but still couldn't get it all out. I didn't know how to pop the casters apart. I watched your video and easily popped the casters apart. I cleaned them and put them back together. The table now rolls like it's brand new.
This was so helpful. I got two swivel chairs from FB Marketplace and I was having problem getting the caster wheels to move. Your tips helped me resolved the problem. Now the chairs are working fine. Thank you.
Before this video I had been struggling for years with stuck wheels that keep dragging along the floor. Then I got frustrated and finally decided to search for a solution and find this video. Now my chair moves along the floor smoothly like brand new. Cheers, mate!
Thank you, Great help, I used after I saw what you were doing some thin open in wrenches, 3/4 till 7/8 will work, much faster than screwdrivers thanks again
thank you! my wife works at a vet and the docs are consistently buying new chairs. now I can scoop the dumped ones, clean them up and they're good as new
The hair rolled into my wheels so much that I thought it was some kind of a rubber padding for the wheel to fit in. Thanks to your video, I was able to clean it up, and fix it right back in with a pop.
I got my chair on Christmas last year and since i have long hair my chair never wanted to roll i finally decided to clean it and this video was a great help, thank you
Dude thank you cuz we have an office chair and we thought that your method wouldn't work because we thought that it might break but it didn't! Ty dude new subscriber here! 😃
It took me many tries to get the first one apart I was afraid to break it but I get how to do it now I'm taking apart my mom's sewing room chair wheels you wouldn't believe how much thread is clogged up in them thank you very much for this video!
Thanks! I got two free computer chairs, I cleaned them up and now I have to clean the wheels. They roll good and I washed with mild soap and water and lysol, however I just wanna be safe and clean as much as a I can. Thank you for the tip!
The way I races to steal my dad's tools lmao But for real this helped a lot, thread and hair always end up on my wheels and I knew there had to be something I could do to pry them off, but I never thought to lever them off.
I found needle nose locking pliers (vise grips) on one side clamped on the plastic where the wheel mounts over the axle to work best. From there just push the vise grip handle out and don’t worry about breaking it and off it comes
Thank you so much for this video! It helped us since we got a nice computer chair from my husband's mother in law, but the wheels had tons of hair in it. Now it rolls like a dream.
Thanks for this! My expensive Herman Miller chair's casters have been creeeeeeaking annoyingly, and thanks to your video tutorial, I was able to apply the right amount of force to separate the wheels. It's one of those things where you just don't know how much elbow grease to apply for fear of breaking a component. Thanks again.
Thank you for this video. I watched the whole video and I was having the same problem, so this video help . I was able to repair all of them without having to purchase new ones.
Thank you! I used two wrenches instead, it was easier to open the wheels with them and a lot less scary than using the screwdrivers, which I tried first but it just wouldn’t work. I did put all my weight in it but it worked very very well with the wrenches. Now my chair feels like new.
So for about 3 years now I've been having to buy new sets of wheels pretty frequently... The wheels would always pop open by themselves and be irrepairably broken by the amount of gunk which was building up there. I thought they simply weren't made to be disassembled like that. This video showed me it was possible to get them off and on again without too much hassle. Thanks to that, this time around, I'll save some bucks I wager! I'm starting to think these office chairs are really not worth having, however. Maybe next time I'll buy an armchair to sit on while doing computer stuff ;P
I just got a free chair that's almost perfect except for a bent hub axle and stuck wheels. was able to fix the axle, but the clogged wheels were stumping me until now. Thanks!
Thankkkssss a lot sir..... For long time I have no idea about how to clean my chair wheels u video make me clear I have cleaned all the wheels now it's rolling super without any problem thank u so much... I'm happy now
If you can't afford caster replacements, this is extremely helpful. That said, a pair of rubber roller blade casters is like 35 dollars CAD. Still awesome to know about, though I never really could get the casters to pop open. Thanks for the video regardless!
Appreciate the vid… sadly, realized 2-3 of the wheels were already cracked as I started taking them off the chair and just ordered new ones, :(. I did clean them out with a pair of needle nose and got the easy stuff until the new ones arrive…. As you said, cleaning is satisfying. :). Pulled my bathroom exhaust and dryer vents off earlier and got the REALLY fun stuff done earlier… ah, Father’s Day fun!
Found a really easy way to separate the wheels: *use two hammers*. Face the hammers away from each other, touching the backs of the claws (apparently called the “cheeks”) together. The handles and claws should make an ‘M’ shape. Put the claws inside the wheel, with the claws pressing against the inside of each wheel. Now pull the handles away from each other-keeping the pivot point where the cheeks are touching-and the wheels will pop right off! Thanks again for the useful video.
Such an old video but sooo helpful! Trust me, this is coming from someone who ever spent 5 hours slowly clipping away the gunk stuck in the wheels using nail clippers and tweezers. Now it’s just 10 mins of psyching myself and praying that I wouldn’t break my wheels, and then 5 mins opening and cleaning each of the remaining 4 wheels 😅
Great video. I was looking for how to clean the wheels of my chair and pulling and trying to cut the hair and threads off was a senseless task. Did a search on UA-cam and found this. It works, It's a bit of an effort to get the wheels apart The last one was shear effort to press together until you get that wonderful Click!
Exactly what i needed to know, i clean an office that 2 dogs in it and trying to pull hair out with tweezers takes forever. Got the chair apart and reupholstering it. Thanks!
Very good video!!! Thanks to this video I could clean my chair wheels after 10 years of use!! Now it rolls very well. One fact: it is enough to do the exact moves explained in the video, but expect that somethimes it may be really very hard, i. e. you need very much force to press on the screwdrivers.
Brilliant! Like Harriet below, I was afraid to put too much force on the wheels. Yes it worked, as did the LITTLE bit of WD40 to loosen off the fixed wheel. My chair is now moving freely. Thank you.
Judging by the comments on this video I'm guessing this was my chair's or my screwdriver's fault, but I found the biggest set of screwdrivers in the house and wedged them against the wheels and pushed. And it snapped the metal screwdriver shear in half. Haven't been so surprised in a long while
Good advice, but mine were a LOT dirtier and it took a lot more force and time to get them off. After your video, it took me about an hour, but the results are great.
Thanks for this video. This is really going to help me clean the wheels on the three chairs we have. Not having smoothly gliding wheels are really hard on your pelvis. I’m saying this from experience, believe me. I ended up at the chiropractor to have my back adjusted.
My new chair slides too much, I guess I have to open the wheels and put some hair there, the hardest part will be convincing my wife to donate some hair.
🤣🤣🤣
🤣
omg 🤣
Well done my son 💓
lol same goes to my sis as well, she does not care of taking care of her hair at anything knowing that his responseble for that but either way i guess she will never learn 🙄
I love that you started out by explaining the design of the wheel parts before describing disassembly process.
OMG I know this video is old but, THANK YOU SO MUCH FOR THIS VIDEO!! I had my chair for YEARS and I did not even know how much hair could get stuck inside until i turned my chair over just now. Thank you so much!!😦⭐️✨
When everyone else tells me to just replace the damn things, you gave me the courage to actually try and split them apart
And I did! And I cleaned them, and they work substantially better now, thank you.
Thanks - this gave me the courage to put a bit more force into getting the wheel off - and it worked!
scary for sure :-)
Exactly what I wanted to see 😸👍🏼
More force on which part, left or right of the wheels ? Afraid might broke it.
Same as other comments, wanted to pop the casters apart to get the hair off instead of growing old trying to pick it out, but was worried about how much force I was having to use. Your vid gave me the confidence to really put some stank on it and sure enough, pop they did. No damage either. Hair removed, and lubricated with some graphite paste, and reassembled. I also used a blade to scrape the wheel surfaces clean, to get rid of the old ball-mouse "roller rumble". Worked great, helped me keep this old chair in service a bit longer.
One note, I feel like some kind of spreader tool would work a lot better, like the sort used for automotive brake calipers. Cant find any thatd fit tho
I knew I needed to pry apart the two wheels in order to get them to seperate, but I didn't have the guts to go full strength at them untill I watched your video. And voila! they came right off. Thanks!
ooo
same
I chickened out
"That's a lot of gunk" mate I have a golden retriever you haven't seen "a lot of gunk" yet. Thanks for the video. Wasn't aware one could separate the wheel components (these were replacement wheels because the original wheels - surprise - got gunk in them!)
This was sooo helpful. With the aid of your video, the wheels on my office chair got cleaned in 30 minutes, and the chair is gliding along nicely once again. Thank you!!
Some advice to those trying to separate the wheels, use the biggest baddest screwdrivers you got. I used some about the size of my fingers, and really they acted more like wedges to more easily spread them apart, you do have to twist and use force, but thick, wedge-like screwdrivers help a bunch.
*edit* Also, I had more success putting the screwdrivers on the same side rather than opposed, and then sorta with a rocking see-saw motion popping them out. I'd try the other method first as this may be more of a risk in breaking the plastic. But it worked for me.
Thanks for the video, couldn't find any other source that explained how to spread the wheels apart. Thanks
Thanks for your comment ;) I was toying with the idea of using a couple of cold chisels because of their greater width primarily to lessen the localising of the load and hopefully reduce the risk of breakage, my office chair was $500 and has non-standard diameter shafts where it enters the chair proper. :(
Wrench. Use a crow bar
A gear removal tool for motorcycle transmissions will take care to pull this wheel off easily
Thanks for your comment, the wheels on mine have never run smoothly since I bought it new :( "perhaps my butt weighs more than some others giving better traction?", so I'm kinda getting away with it. Though you mention "wheel brakes"? I now learn the wheels are designed to have a safety brake feature, when someone is sitting in the chair they run smoothly enough, but when no one is sitting in the chair; they become safety wheel-brakes? but it would be nice if it ran freely. Every success with "fixing" your own, they are really quite nice chairs. /// again your comment, with regard wheel brakes; I just Googled > "ikea office chair wheels not rolling". And it seems these wheels do have some sort of safety auto brake?, perhaps opening up the market for use on ships/cruise liners?. perhaps see also these two URLs ?> ua-cam.com/video/qPoxjKls8gM/v-deo.html ///and/// www.google.com/search?client=firefox-b-d&q=ikea+office+chair+wheels+not+rolling#fpstate=ive&vld=cid:4577205b,vid:9YEBUaV65uk /// Best wishes. John, Perth, Western Australia
Your video saved me a bunch of time and possibly throwing away an old chair base. Thanks!
I was just not able to remove the wheels. Your video gave me CORRECT way to remove the wheel and clean the castor. It does shoot like a bullet while removing.. Great.
Very helpful! I would never have put that much pressure on separating the wheels if I hadn't seen the video. Thank you!
Hey man thanks for the video. After watching this video, I cleaned my chairs caster wheels in half an hour!
I cant thank you enough! This was amazing!!! Super hard to disassemble the wheels but oh so fantastic.
I was about to throw away my chair and now is fixed. Thanks!!! Now just need a new manicure, and a band-aid for a hurt finger 😜
thank you so much! Most comments here sums up the greatness of your tutorial, so I'll add my tweaking: I didn't have any screwdrivers that were thin enough to leverage off the wheels, so I used a pair of thin, dull butter knives to get in there! Got all of the gunk off 👍👍
This video saved me. I recently bought a used chair from someone off Facebook and was quite horrified to see the wheels all clogged up with that person's hair and dirt! I spent a little bit of time trying to tweeze the hair out before realizing there must be a better option. This video saved me so much time and grossness (blech...), thank you so much!!
From the side of the road, I just picked up a Herman Miller 'Ergon' chair, & the only thing that's wrong with it is that the hair has stopped the wheels rolling!
Brilliant video explanation. Thank you!
Just found this after buying an old office chair which has the exact same design of caster, completely matted up with someone's hair. Now spinning very freely. Very useful video. Thank you.
i never understood why manufacturers don't make wheels easy to clean. this is a problem literally everyone will have at some point
There are hair-proof wheels that you can purchase. Hairproofsystem is one of them.
I'm not sure how effective they are tbh. I'll be getting one in the future.
Great tutorial! Yes it IS therapeutic! Respect you much for encouraging to remove and clean (fix not replace) as is our way, always. So, to all you out there, you can do this. Its the fourth "R"! (Reuse, Reduce, Recycle AND Restore). Thanks Otway.
THANK YOU SO MUCH!!! This video helped me tremendously! I needed an office chair very badly but didn’t want to pay a lot of money for one because I’ve just moved into a new home and have lots of bills to pay. I found a free one outside by the dumpster of a shop and brought it home and the wheels wouldn’t roll. It must’ve been a craft or sewing shop because it was LOADED with thread! This video save me lots and lots of time and energy. Thank you again and have a blessed day!
Thanks for the video - it not only saved me lot of time, but also facilitated effective cleaning. I was concerned about damaging the wheels of my Godrej swivel chair, but they proved to be quite sturdy to bear the brunt of disassembly.
Thanks for saving me time and money. I went to homedepot to buy new ones but after watching your video, I took them back and fixed my old ones
Apparently The amount off force required had more people in doubt here. Your video gave me the courage to put some extra force behind it. Thanks for your explanation!
Mission accomplished thanks to your awesome video! Would've spent hours with needle-nose pliers, box knife, etc., OR given up and ordered a new set!! Rollers are as good as new in about 15 minutes!!!😏
Poof yiii! That definitely takes some force BUT I got it. 30 mins later and I'm doing the Indie 500 around my room. AWESOME and thank you!
Wasn't sure how to do this without breaking something, so I googled it, this came up first... now our wheels are happily spinning again.
Thanks!
Thank you very much for this video. This helped me so much. My husband's bedside table have casters and they needed cleaning.
I cut the gunk with a pocket knife and used pliers, but still couldn't get it all out. I didn't know how to pop the casters apart. I watched your video and easily popped the casters apart. I cleaned them and put them back together. The table now rolls like it's brand new.
Thank you, the wheels weren't turning, so I tried this. Thank you so much
Thanks! this 77 year old grandma just fixed her office chair with your help!
Thank you for this tutorial! This will help me clean my cheapest wheels. Couldn't get myself to throw them to the garbage. :-)
This was so helpful. I got two swivel chairs from FB Marketplace and I was having problem getting the caster wheels to move. Your tips helped me resolved the problem. Now the chairs are working fine. Thank you.
Before this video I had been struggling for years with stuck wheels that keep dragging along the floor. Then I got frustrated and finally decided to search for a solution and find this video. Now my chair moves along the floor smoothly like brand new. Cheers, mate!
Thanks for the vid m8, made my 4:30 am 'adventure' a lot easier
Therapeutic is right, bro. Thanks for the advice. I’m actually *eager* to help my brother clean out his casters now.
Pried those wheels on my chair apart with a pair of spanners. Watched your video and figured I was holding them the wrong way. Thanks!
Thank you. I’m so glad I saw this. I was having trouble separating the wheels. I used your technique with the screwdrivers and it worked perfectly.
Just tried this today. Fixed 2 computer chairs. Another 2 on the way. Thank you very much for sharing. 🤗😊
i know this video is super old and you've been told 274 times already but still wanna thank you for helping:)
Thank you, Great help, I used after I saw what you were doing some thin open in wrenches, 3/4 till 7/8 will work, much faster than screwdrivers thanks again
Thank you. I was reluctant to try high pressure, for fear of breaking parts. Your explanation was great, through, and extremely helpful. Blessings.
thank you!
my wife works at a vet and the docs are consistently buying new chairs.
now I can scoop the dumped ones, clean them up and they're good as new
The hair rolled into my wheels so much that I thought it was some kind of a rubber padding for the wheel to fit in. Thanks to your video, I was able to clean it up, and fix it right back in with a pop.
I got my chair on Christmas last year and since i have long hair my chair never wanted to roll i finally decided to clean it and this video was a great help, thank you
Excellent tutorial. I was on my way half way through...
THANK YOU. My castors wouldn't permit reaching chair leg, but crossing the tips of 2 flat bladed screwdrivers meant I could lever against that.
hello I just wanted to say thank you for your very helpful video! shocking how much hair string and gunk those wheels can hold!!!
Thank u man. You saved my day. Greetings from Greece
I needed to reassemble casters and this really helped to see the anatomy of the wheel and the force needed to get it back together, thank you!
Dude thank you cuz we have an office chair and we thought that your method wouldn't work because we thought that it might break but it didn't! Ty dude new subscriber here! 😃
I have tried different tutorials on yt but this tutorial worked for me Thank you!
I found that a pair of needle nose pliers worked better as i could equally force the wheel in two places. appreciate the video.
It took me many tries to get the first one apart I was afraid to break it but I get how to do it now I'm taking apart my mom's sewing room chair wheels you wouldn't believe how much thread is clogged up in them thank you very much for this video!
I am so happy. My chair works so smoothly now. I can't stop moving it lol! Thank you so much!
Thanks! I got two free computer chairs, I cleaned them up and now I have to clean the wheels. They roll good and I washed with mild soap and water and lysol, however I just wanna be safe and clean as much as a I can. Thank you for the tip!
5yrs later,im back.Time to clean them again. Thanks again for hanging around.
Hope your well.
See ya in 5.😊
6.29.24
The way I races to steal my dad's tools lmao
But for real this helped a lot, thread and hair always end up on my wheels and I knew there had to be something I could do to pry them off, but I never thought to lever them off.
I found needle nose locking pliers (vise grips) on one side clamped on the plastic where the wheel mounts over the axle to work best. From there just push the vise grip handle out and don’t worry about breaking it and off it comes
Thank you so much for this video! It helped us since we got a nice computer chair from my husband's mother in law, but the wheels had tons of hair in it. Now it rolls like a dream.
Thanks for this! My expensive Herman Miller chair's casters have been creeeeeeaking annoyingly, and thanks to your video tutorial, I was able to apply the right amount of force to separate the wheels. It's one of those things where you just don't know how much elbow grease to apply for fear of breaking a component. Thanks again.
Perfect How-To Video! Straightforward, quick, right amount of instruction! Thank you!
Thank you for your video. I was able to finally get all the hair out of the wheels by following your steps.
Thank you for this video. I watched the whole video and I was having the same problem, so this video help . I was able to repair all of them without having to purchase new ones.
Thank you! I used two wrenches instead, it was easier to open the wheels with them and a lot less scary than using the screwdrivers, which I tried first but it just wouldn’t work. I did put all my weight in it but it worked very very well with the wrenches. Now my chair feels like new.
Thanks for this - gave me the confidence to pop those wheels apart to get them really cleaned out!
I like that you're straight to the point! Great instruction!
thanks a bunch dude. just cleaned those nasty wheels following your tutorial.
Love this. Only $15 a set but as you say, therapeutic and save the planet.
I just watched this video and it worked thank you so much my wheels needed a clean
It was easy to do and now my chair feels new thanks brah
Thank you friend. I needed this video to repair my casters. Very good insight to this fix.
So for about 3 years now I've been having to buy new sets of wheels pretty frequently... The wheels would always pop open by themselves and be irrepairably broken by the amount of gunk which was building up there. I thought they simply weren't made to be disassembled like that. This video showed me it was possible to get them off and on again without too much hassle. Thanks to that, this time around, I'll save some bucks I wager! I'm starting to think these office chairs are really not worth having, however. Maybe next time I'll buy an armchair to sit on while doing computer stuff ;P
Thank you so much! To add to help anyone else, both wheels should be able to be popped off. Just pick a side and pop it off with your flatheads!
I just got a free chair that's almost perfect except for a bent hub axle and stuck wheels. was able to fix the axle, but the clogged wheels were stumping me until now. Thanks!
Thank you for this, I always knew there was hair and stuff in the wheels, I feel so good now that its all clean
You sir, are a legend! This video helped so much! Thank you! Got all the hair and grossness out that was building for years. The chair moves again!!
Thankkkssss a lot sir..... For long time I have no idea about how to clean my chair wheels u video make me clear I have cleaned all the wheels now it's rolling super without any problem thank u so much... I'm happy now
If you can't afford caster replacements, this is extremely helpful. That said, a pair of rubber roller blade casters is like 35 dollars CAD. Still awesome to know about, though I never really could get the casters to pop open. Thanks for the video regardless!
how do we clean the rollers?
Appreciate the vid… sadly, realized 2-3 of the wheels were already cracked as I started taking them off the chair and just ordered new ones, :(. I did clean them out with a pair of needle nose and got the easy stuff until the new ones arrive…. As you said, cleaning is satisfying. :). Pulled my bathroom exhaust and dryer vents off earlier and got the REALLY fun stuff done earlier… ah, Father’s Day fun!
Thanks. This saved me a lot of cutting and plucking 😅
Found a really easy way to separate the wheels: *use two hammers*. Face the hammers away from each other, touching the backs of the claws (apparently called the “cheeks”) together. The handles and claws should make an ‘M’ shape. Put the claws inside the wheel, with the claws pressing against the inside of each wheel. Now pull the handles away from each other-keeping the pivot point where the cheeks are touching-and the wheels will pop right off!
Thanks again for the useful video.
Worked like a charm! Thanks for making and posting this video!!!
Thanks for the video mate! I learned how to take the wheels apart.
Such an old video but sooo helpful! Trust me, this is coming from someone who ever spent 5 hours slowly clipping away the gunk stuck in the wheels using nail clippers and tweezers. Now it’s just 10 mins of psyching myself and praying that I wouldn’t break my wheels, and then 5 mins opening and cleaning each of the remaining 4 wheels 😅
Thank you for the info. God bless your vlogs!
Great video. I was looking for how to clean the wheels of my chair and pulling and trying to cut the hair and threads off was a senseless task. Did a search on UA-cam and found this. It works, It's a bit of an effort to get the wheels apart The last one was shear effort to press together until you get that wonderful Click!
Exactly what i needed to know, i clean an office that 2 dogs in it and trying to pull hair out with tweezers takes forever. Got the chair apart and reupholstering it. Thanks!
Very good video!!! Thanks to this video I could clean my chair wheels after 10 years of use!! Now it rolls very well.
One fact: it is enough to do the exact moves explained in the video, but expect that somethimes it may be really very hard, i. e. you need very much force to press on the screwdrivers.
Thanks man, i was afraid to break them if i aplied to much force until you said it was ok.
Brilliant! Like Harriet below, I was afraid to put too much force on the wheels. Yes it worked, as did the LITTLE bit of WD40 to loosen off the fixed wheel. My chair is now moving freely. Thank you.
Thank you for the support man... My chair is now movable as ever
Thanks Ross, saved me 300 bucks.
Judging by the comments on this video I'm guessing this was my chair's or my screwdriver's fault, but I found the biggest set of screwdrivers in the house and wedged them against the wheels and pushed. And it snapped the metal screwdriver shear in half. Haven't been so surprised in a long while
Good advice, but mine were a LOT dirtier and it took a lot more force and time to get them off. After your video, it took me about an hour, but the results are great.
Thank you so much! It was really helpful 😁
Thanks for this video. This is really going to help me clean the wheels on the three chairs we have. Not having smoothly gliding wheels are really hard on your pelvis. I’m saying this from experience, believe me. I ended up at the chiropractor to have my back adjusted.
Top work my man! i used a couple pairs of plies to separate them, long nosed ones were perfect! thanks for the vid :)
Thanks for sharing this video it helped me 😀 Save the planet just clean them ..... great attitude! 👍🏻
Thanks for posting this. I always did it the hard way because I was afraid of cracking the caster if I tried to take them apart.
I think this is the only solution even now 😉. Thank you so much