I see these wire wreath forms in so many different shapes and sizes all the time when I film my Dollar Tree videos. I’ve wondered about all the ways people can use them. I made a heart one. This is a great idea. I love how it turned out. I’m learning new ideas and skills from you! Your talent is inspiring. I am Happy to be learning together with you.
Hi, my 1st time watching you, I am watching your replay, that's beautiful, I really like how you did this one, you made the cross larger and wider by doubling the white and I really like the star burst in the center. Thank you for sharing your wonderful tutorial.
Thank you for all the information you showed I have learned so much from and I like the way you made it look so full I did one for the first time I’m learning how to use my hands again since I had a stroke Can’t give up got to keep going with keep looking at your UA-cam videos I will learn ❤
I love the tutorial. Very straight forward. I like you were not uber chatty.😜 You turn out beautiful work. I could hear you fine. And I thought the instructions were very clear. Thanks!
Hi. I’m Suzie from Oklahoma. Just found you. Thank You so much for this tutorial. I have a little tip for you. At the Dollar Tree in the hair isle they have packages of these little hair bands. You can put them on the ends of your wings to hold them together. Wrap them a couple of times. No need to remove them. Sure has been a good solution for me. Hope this makes since. Thank You for all you do. Really appreciate you. 🌷
This is absolutely Beautiful!! Thank you for sharing!! I usually luv to hear it rain but that sounded so much like a dryer it really is distracting. I look forward to seeing more of your videos when it isn't raining lol
You did great on your 1st live. It turned out beautiful!! When you said to cut 2 pieces of mesh together to save time, that's good advice if your using scissors or rotary cutter, but if using the burning tool, that will not work, because it will kinda melt the 2 pieces of mesh together.
Hi Sandra I have a question. On your white and purple deco mesh cross wreath. Question is how many white tolls would I need for one cross. I love your cross wreath.thank you for doing a tutorial.
You make beautiful cross wreaths do you have a video on the one in the back ground I love the look of it is it red and white ? this was the first time I saw you I have now subscribe to you Thanks for sharing.
It is burgundy and white and is the same design as the one in the video. I've stopped making any videos unless it is a custom order. I have too many wreaths in storage that I haven't sold. There's just so much competition! If I happen to make one like this I will make a video
The original design for this wreath is by Kathy Allen. i couldn't remember where I had seen it before. I do apologize for any misconception. I never said this was my design.
When you have to ship your cross wreaths... what do you use to ship them in... yours is so beautiful I would like to make one for my sister in Oklahoma...
What size styrofoam circle is needed 6”? Or 4? Thank you so much for the tutorial. I understood you perfectly. Straight forward easy to understand. I need that lol have a blessed day!
Love this cross and have everything to make it. Question...when you attach the starburst, do you put the zip tie around all of the wire or just the two in the middle like the other purple ones? Thank you....
Each section on the short side uses two rows of white, total of 8 petals, and 1 row of purple, total of 2 petals. The longer sections alternate, so it depends on what color you start with
My first time watching and I truly enjoy your demonstration of doing the wreath cross, my first one did not come out good, and I think it was because of the poly deco mesh and I sure really what type of mesh to use. Thanks so much.
I am new to your video. I am from Ohio. I have a question for you. Can you use 5 inch mesh in making a cross wreath? Please let me know. Ok?. I really enjoy watching your video. I am going to make One. Have a very blessed day.
I don't recall exactly how many are on the longest section. But there are 4 bundles of white and 1 purple on the short sides. I think there are twice as many on the longer side
A little point for newbies .. maybe you should show the back after each section. I've been doing this for a while and I had to go back and check my count. Your cross wreath is different than the ones I've made these in the past so I wanted to make extra sure I was putting the right amount in each section so maybe newbies may need extra help
I was going to do it like you but 3 colors so I thought one color up the center then the two other colorsI would run on the sides.hope you understand what I am saying.lol you
Do tutorials when your not running a dryer or whatever that distracting noise was. Cross was beautiful, I would have tried to pick a purple flower closer to the mesh color if possible I was confused as to whether you did double purple all the way up the front. Starting out is hard my comments are not meant to be taken as criticisms.
Two bundles (2) of white (one on each side) and then one bundle (2) of whatever other color you use in the next section. Keep alternating until you get to the starburst center
I have watched several tutorials for these but this is the prettiest I have seen. Thank you.
Thank you so much
I agree. Her’s are delicate and gorgeous.
I see these wire wreath forms in so many different shapes and sizes all the time when I film my Dollar Tree videos. I’ve wondered about all the ways people can use them. I made a heart one. This is a great idea. I love how it turned out. I’m learning new ideas and skills from you! Your talent is inspiring. I am Happy to be learning together with you.
Love the starburst. Beautiful cross. Thanks for sharing ❤️
Love you 🥰 keep up with the lives I will be watching ❤
Beautiful love the colors. ❤
Love the video but the noise in the background is hard to hear you.
I know. I apologize for the noise. It started raining on my metal roof
Rattling and dinging
How many rolls of white
To much noise behind you
Sounds like she has the dryer on
Hi, my 1st time watching you, I am watching your replay, that's beautiful, I really like how you did this one, you made the cross larger and wider by doubling the white and I really like the star burst in the center. Thank you for sharing your wonderful tutorial.
Thank you for all the information you showed I have learned so much from and I like the way you made it look so full I did one for the first time I’m learning how to use my hands again since I had a stroke Can’t give up got to keep going with keep looking at your UA-cam videos I will learn ❤
This is Beautiful. I liked how you showed how to make it. Thank you for Sharing.
Your welcome
What a beautiful project. Your instructions are easy to understand. Thank you for sharing!
Thank you so much!
Beautiful wreath. Enjoyed watching it
Thank you
You did a wonderful job. I will be watching for your tutorials. You are easy to follow. Thank you
Thank you
Yes ma'am you did great. I like your cross you did, I will try it myself.
Thank you for sharing your tutorial, this was my end result. I made it for my elderly neighbor and she absolutely loves it😍
I don't see a picture
@@sandraheald3464
Lol, I know Facebook inside out but I’m kind of new to UA-cam and I couldn’t figure out how to get the picture uploaded
I love the tutorial. Very straight forward. I like you were not uber chatty.😜 You turn out beautiful work. I could hear you fine. And I thought the instructions were very clear. Thanks!
Thank you!
I watched this and decided to take mine apart and use her instructions. Like it so much better.....
First time watching you love it now I need to make one. Thanks so pretty
Thank you
Thank you for your tutorial! I just followed it and my wreath turned out amazing!
You're welcome. I'm so glad you were able to make one
❤🎉 at like the purple I made a yellow and white one thank you very much and have a blessed day
Very will and beautiful.
Love your cross and the color you chose. My uncle loved purple, he passed 2016. New to your channel, keep up the awesome work 👋🥰
Thank you. Sorry for you loss. Purple is one of my favorite colors too
New to your channel. Love your cross. Thank you for sharing.
Thank you
Beautiful! 🥰👍
Same here had to take off and start over .
It's beautiful I'm going to try it great video
Thank you! 😊
Hi. I’m Suzie from Oklahoma. Just found you. Thank You so much for this tutorial. I have a little tip for you. At the Dollar Tree in the hair isle they have packages of these little hair bands. You can put them on the ends of your wings to hold them together. Wrap them a couple of times. No need to remove them. Sure has been a good solution for me. Hope this makes since.
Thank You for all you do. Really appreciate you. 🌷
Thank you
This is absolutely Beautiful!!
Thank you for sharing!! I usually luv to hear it rain but that sounded so much like a dryer it really is distracting. I look forward to seeing more of your videos when it isn't raining lol
If I ever get an order for another one I am going to make another video. Sorry for the noise but thank you for the compliment
It was hard to hear but I enjoyed your video. Sounded like hale
Love your cross and the color you chose
Thank you
You did great on your 1st live. It turned out beautiful!!
When you said to cut 2 pieces of mesh together to save time, that's good advice if your using scissors or rotary cutter, but if using the burning tool, that will not work, because it will kinda melt the 2 pieces of mesh together.
Thank you and you are correct. I should have made that clear
Love your wreaths!
Thank you
I love your cross I'm planning making one for my son who passed away8 years ago
Beautiful wreath
What kind of mesh do you use
I usually buy my mesh online at craft outlet. Better quality than the stores
Love your videos. Did you mention how many rolls of mesh for each color?
Yes I did. It was around the time I was showing how to cut the mesh
When you make the bundles you can put clear hair ties to keep them together instead of holding them with clips
Great job
Hi Sandra I have a question. On your white and purple deco mesh cross wreath. Question is how many white tolls would I need for one cross.
I love your cross wreath.thank you for doing a tutorial.
you would need a little over 1 roll
You make beautiful cross wreaths do you have a video on the one in the back ground I love the look of it is it red and white ? this was the first time I saw you I have now subscribe to you Thanks for sharing.
It is burgundy and white and is the same design as the one in the video. I've stopped making any videos unless it is a custom order. I have too many wreaths in storage that I haven't sold. There's just so much competition! If I happen to make one like this I will make a video
Your wreath is sooo pretty 😍, can you tell me how you will cover the back?
I don't put anything on the back. Thank you
Love it! My favorite color
Mine too. Thank you
The original design for this wreath is by Kathy Allen. i couldn't remember where I had seen it before. I do apologize for any misconception. I never said this was my design.
When you have to ship your cross wreaths... what do you use to ship them in... yours is so beautiful I would like to make one for my sister in Oklahoma...
I had to order some boxes. Just measure your cross and look for a box it will fit in
Love it.
What size styrofoam circle is needed 6”? Or 4? Thank you so much for the tutorial. I understood you perfectly. Straight forward easy to understand. I need that lol have a blessed day!
4"
@@sandraheald3464 thanks so much!!
that cross is beautifull
Thank you
Love this cross and have everything to make it. Question...when you attach the starburst, do you put the zip tie around all of the wire or just the two in the middle like the other purple ones? Thank you....
Same as the others
Mine breaks when I get tight.Any suggestions
How wide is your mesh. How wide do you cut it. First time watching really enjoying it
10" and cut 10" squares
Good job pretty
Thank you for your Time
love your video, how many of the whites an how many of the purple do u use on each section i lost count lol
Each section on the short side uses two rows of white, total of 8 petals, and 1 row of purple, total of 2 petals. The longer sections alternate, so it depends on what color you start with
Love it
Very beautiful, how many 10”” squares do u come up from one roll ?
You can get 35-36 10 inch squares from one roll of mesh. You'll need 44 white and 26 purple
I thought if, Dollar Tree frames tend to snap, how about reinforcing it with floral wire ahead of time 🤫
Also, you could make your own frame too 🤫
How wide is the mesh using I really like this and ready to purchase the mesh?
10"
MUI hermoso su clase me encantó
My first time watching and I truly enjoy your demonstration of doing the wreath cross, my first one did not come out good, and I think it was because of the poly deco mesh and I sure really what type of mesh to use. Thanks so much.
I usually get my deco mesh from craftoutlet.com or thewreathshop.com. usually if you get it online it's better quality
I mistakenly bought 22ftx15ft, can I cut the roll in half and use it??? It would have 3 raw sides, I'm afraid it might fray too much
If you use a wood burner to cut it with, it will help with the fraying
I am
new to your video. I am from Ohio. I have a question for you. Can you use 5 inch mesh in making a cross wreath? Please let me know. Ok?. I really enjoy watching your video. I am going to make One. Have a very blessed day.
I don't think 5 inch mesh would work
So beautiful
Thank you
Thank you I completed one but how do you keep it from fraying?
You can spray it with hairspray
How big is the mesh you are using? You said you cut it into 10 inches, but is it 12 inches tall?
It's 10" mesh so 10x10" squares
I love the cross wreath. Could pipe cleaners be used instead of the zip ties?
Yes
How big is your cross wreath and where did you find it?
I don't have one to measure at present but it's probably a little over 2ft tall. I got the frame from Dollar Tree
When using this type of mesh do you ever use a wood burner to cut ? If so, does it help reduce fraying with this type of mesh?
I almost always use a wood burner. See
Definitely cuts down the fraying
I know u said cut 10", but what size roll did u get?
10"
How many bundles are you putting in each frame section?
I don't recall exactly how many are on the longest section. But there are 4 bundles of white and 1 purple on the short sides. I think there are twice as many on the longer side
You would then make your starburst in the middle
A little point for newbies .. maybe you should show the back after each section. I've been doing this for a while and I had to go back and check my count. Your cross wreath is different than the ones I've made these in the past so I wanted to make extra sure I was putting the right amount in each section so maybe newbies may need extra help
Do you cover the back and if so what with
No I don't but you could if you wanted to with some felt maybe
Beautiful
Thank you
I'm very Interested in your cross wreaths you do a Great job.But that noise is to loud an it gets on my nervers
I apologize. It started raining and I was in a metal building
Beautiful ❤
R u making popcorn 🍿 or is it raining outside ☔️ all u hear is pop pop
Sorry it was raining
How many pedals do you put in each section
three rows
Very pretty, I could hardly hear you, sounded like laundry going in the background,
You never mentioned if your mesh roll was 10x10 or using am21” roll. Looks like 21” to me.
Sorry it is 10x10
What is that horrible noise? Or is it my connection?
It started raining and my building has a metal roof. I didn't realize it was that loud until after I had taped it.
Why do you put 2 in each bundle?
That's how the design is made
Very informative but the metal knocking sound is very disruptive
What is the background noise?
It started raining on the metal roof
Where do you find a cross frame if not at Dollartree
Maybe etsy. I have lots of frames. They are just expensive to ship. Where do you live?
What is that noise in the back friend
It started raining and I was in a metal building
So the mesh is 10 inches long AND your cutting it 10" also?
Yes
@@sandraheald3464 thanks so pretty
Soy de México no avía visto de ese tipo
What are the size you cut the demo mesh
10 inch squares
There isnt any at ny dolltree either tell me can I used a cooling rate.
I think that would work if it's cut right
I am making a 3 color how many of each color would I need to cut!
It would depend on how you area going to lay it out. Are you going to make 3 different layers of colors
I was going to do it like you but 3 colors so I thought one color up the center
then the two other colorsI would run on the sides.hope you understand what I am saying.lol you
@@patmorey2467 then you should be able to divide the number of white ones in half
Dollar tree has wire which looks like wheels. Is any one know what to make with them ?
What is that noise?
It started raining and I was in a metal building. Sorry
Do you have a dryer going?
Sorry it started raining
How many go in each section
The rows in each section
This was my first one
Idk why pictures won't show up
What the heck noise is that? The dryer? Rain on tin roof?
Rain
Do tutorials when your not running a dryer or whatever that distracting noise was. Cross was beautiful, I would have tried to pick a purple flower closer to the mesh color if possible
I was confused as to whether you did double purple all the way up the front. Starting out is hard my comments are not meant to be taken as criticisms.
It was not a dryer. I was in a building with a metal roof and it started raining
Poly burlap is the best for these especially if they are going to be outside in the weather! Good video but the noise is horrible…..
Would be nice to see what your doing
I believe she is multitasking...I think she's drying clothes... I think her instructions are Great
sorry about the noise. It started raining and I was in a metal building
Your Camara is not pointing down at the project you are doing.
thank you. my first time doing a video
Hi ,I watched your video very nice wreath but the video is too long.
It’s a beautiful wreath but the sound in the background is very distracting and loud
I apologize. It started raining on my metal roof
Try to watch but the back ground noise was a little to much so I had to shut off 😢
Sorry about the noise. It started raining and I was in a metal building
Approx how many do you put on each section?
Two bundles (2) of white (one on each side) and then one bundle (2) of whatever other color you use in the next section. Keep alternating until you get to the starburst center
Three in each section