Brother, I must say you are doing something very different and amazing for ME Design engineers. I will recommend every ME engineer to watch your videos.
Your channel is one of the most highly recommended for mechanical design engineers in this world. Keep doing such fabulous work. I am always eagerly waiting for your videos.
I want to continue making videos zero to the hero in gd&t. Kya padhate ho sir knowledge bhut hai aapke pass please yase hi continue kijiye hm log jaise students ko kuch bhala ho jaye. Thank you sir.
its nice video.. lots of learning.. I just suggesting that.. kindly make a video for checking Surface Roughness values exactly how its measure and different apart of GD&T and Tolerences.. Also different kinds of GD&T measuring techniques..
Great suggestion! Yes definitely. Noted, just for side note, for measurement of Surface roughness ppl use an electronics device called Surface roughness meter, Laser type of probe type.
There were a days where I used to wait for Netflix series but from onwards I can't any more about you master classes( caution ❤ these playlists are so addictive)
Good learning video Expect more GD&T videos in detail each symbol with practically used How Structural design calculations made to ensure the structure strength?
Bhai apako views kam milenge muze pata hai. Lekin please ye chanle band mat karo. Ye knowledge denevala koi nahi hai market mai. Software to sabhi sikhate hai lekin design engineering koi nahi batata. Aur is simple way se to koi bhi nahi. Hat's off....❤
Hi Kuldeep bhai, Please Don't worry. Channel band karne ka koi plan hai.. Ha views plus growth kam rehata hi hai, complete niche down UA-cam channel pe. maine ye accept kar ke hi start kiya hai. aur abhi to hum logo ko bahut dur jana hai. abhi to matlab sahi se koi ak chij ke bhi pura deep me gaye bhi nahi hai. itna wide hai design field ki koi annt hi nahi hai. aur abhi kayi stage aane hai. hume sath mil ke bhi chije karne hai. Aise content market me nahi hai kyu ki is tarh ke videos banane me bhi kahi mehant lagta hai.. mainly visual ko sochana banana, fir kis tarh se present hona hai. kyuki design ko samjhna aap ko pata hi hai kitna muskil hai. techanical to hai hi upar se its like ki dusre ke dimag me ghusna ho jata hai. Plus hum ak word bhi galt nahi bol sakte.. sub kuch likhana padta hai. taki dekhne wale ko koi confusion na ho jaye. koi mislead na ho jaye, kyuki ye videos only educational nhi hai.. kafi applicable ho jata hai. New designers ise sidhe apne design me career me apply karne wala hai. to ye ak responsibility bhi ban jata hai. jis ke liye mujhe jante huye bhi.. kafi sare resource se ak hi chij ko verify krna padta hai. But thik hai.. issme mujhe personal growth mil raha hai. aur satisfaction hai ki main mere hi jese design engineers ko kisi na kisi tarh help kar pa rha hu connect ho pa raha hu. otherwise design engineers ak dusre se kabhi agree kiya hai 😂😂 thank you so much. for your appreciation. 😊😊
What a nice explaination. Thank you for sharing this important things for us, Sir. Keep it in english, so the worldwide can understand without see the subtitle 👍👍
Yes Right but this bearing block is with a lock nut, lock nut is enough to prevent slipping of shaft plus there is angular contact bearing in back to back arrangement which are already preloaded. So don't need to preload with an interface fit. Bearing preloaded adjustments video coming up
Dear sir, why should we draw the lead screw in 2d. Because we have select the standard one, like model:BTK 4010-5.3. then what is the need for draw the 2d, simply we can choose the standard and purchase. plz explain this sir.
Hi Rajesh, I am assuming you are asking why should we make ball screw end steps machining drawing. (Because this is not a drawing of ball screw, this is a ball screw end steps machining drawing) - Why not simply purchase a ready-made machined end ball screw. Yes, we can also buy machined end ball screw as per our application.. from manufacturers like Misumi, THK or Hiwin. But it will be expensive and will also take high delivery time. But again, you have to give them a rough sketch or you have to give them the dimensional values of each diameter and length of each step. So in my experience, it is always better to buy ball screws raw lengths and machine the ends yourself. As per application.
Better to lean from books, but main thing is practice of making drawings in GD&T standard. and for this here i have started a new series, please do checkout
Brother, I must say you are doing something very different and amazing for ME Design engineers. I will recommend every ME engineer to watch your videos.
Ohh Thank you so much brother Pawan. Your words boost my motivation. 😇
Your channel is one of the most highly recommended for mechanical design engineers in this world. Keep doing such fabulous work. I am always eagerly waiting for your videos.
🙏 Ohh brother. Thank you so much 😊 Yes will make this channel world the best mechanical engineering channel together.
I want to continue making videos zero to the hero in gd&t.
Kya padhate ho sir knowledge bhut hai aapke pass please yase hi continue kijiye hm log jaise students ko kuch bhala ho jaye. Thank you sir.
Very good sharing, I got many value knowledge from your video. Hope you give more.
So nice of you. Yes sure
its nice video.. lots of learning..
I just suggesting that.. kindly make a video for checking Surface Roughness values exactly how its measure and different apart of GD&T and Tolerences.. Also different kinds of GD&T measuring techniques..
Great suggestion! Yes definitely. Noted, just for side note, for measurement of Surface roughness ppl use an electronics device called Surface roughness meter, Laser type of probe type.
There were a days where I used to wait for Netflix series but from onwards I can't any more about you master classes( caution ❤ these playlists are so addictive)
Give me your Netflix password 😁😁
The knowledge in GD&T is wonderful sir.
I was eagerly waiting for this video. Appreciate your efforts.
Thank you so much 😀
@@mastermechanicaldesignif you able to get the chance to make a video or series on complete GD&T from basic, then it will be more helpful for us
After watching this, i recognize i need to revise all the basic terms.
If u can make a lecture on basics of gd&t it would be great.
Thank you
Yes, Definitely Complete series from absolutely basic 😊
❤ Thank you very much for such efforts, good practical approach, this will also help us to understand the inspection techniques.
Thank you so much, yes in upcoming GD&T Series we will understand every concept with practical examples
Good learning video
Expect more GD&T videos in detail each symbol with practically used
How Structural design calculations made to ensure the structure strength?
Sure Ashok
Really great Explanation in easy way , very helpful video for me.
Good luck bro✌🏻, excitly Waiting for next video.
Glad to hear that, Thanks a ton
Thanks to your contribution brother may god bless you, looking for such videos
Sure, So many videos to come. It's my pleasure. 😊
Thank you so much for the useful video series.
You welcome 🤗
It was a perfect explanation. Thanks for all of these valuable informations🎉
You most welcome 😊
Bhai apako views kam milenge muze pata hai. Lekin please ye chanle band mat karo. Ye knowledge denevala koi nahi hai market mai. Software to sabhi sikhate hai lekin design engineering koi nahi batata. Aur is simple way se to koi bhi nahi. Hat's off....❤
Hi Kuldeep bhai, Please Don't worry. Channel band karne ka koi plan hai.. Ha views plus growth kam rehata hi hai, complete niche down UA-cam channel pe. maine ye accept kar ke hi start kiya hai.
aur abhi to hum logo ko bahut dur jana hai. abhi to matlab sahi se koi ak chij ke bhi pura deep me gaye bhi nahi hai. itna wide hai design field ki koi annt hi nahi hai. aur abhi kayi stage aane hai. hume sath mil ke bhi chije karne hai.
Aise content market me nahi hai kyu ki is tarh ke videos banane me bhi kahi mehant lagta hai.. mainly visual ko sochana banana, fir kis tarh se present hona hai. kyuki design ko samjhna aap ko pata hi hai kitna muskil hai. techanical to hai hi upar se its like ki dusre ke dimag me ghusna ho jata hai.
Plus hum ak word bhi galt nahi bol sakte.. sub kuch likhana padta hai. taki dekhne wale ko koi confusion na ho jaye. koi mislead na ho jaye, kyuki ye videos only educational nhi hai.. kafi applicable ho jata hai. New designers ise sidhe apne design me career me apply karne wala hai. to ye ak responsibility bhi ban jata hai. jis ke liye mujhe jante huye bhi.. kafi sare resource se ak hi chij ko verify krna padta hai.
But thik hai.. issme mujhe personal growth mil raha hai. aur satisfaction hai ki main mere hi jese design engineers ko kisi na kisi tarh help kar pa rha hu connect ho pa raha hu.
otherwise design engineers ak dusre se kabhi agree kiya hai 😂😂
thank you so much. for your appreciation. 😊😊
Salute your knowledge sir🙏
Thanks again 🙏
You are doing a great work for us❤
So nice of you. Thank you so much brother ❤️❤️
What a nice explaination. Thank you for sharing this important things for us, Sir. Keep it in english, so the worldwide can understand without see the subtitle 👍👍
So nice of you Demy. Yes, all the videos will be in English Language. 👍
Very detailed information 👌🙏
Bro, for bearing we should give transition fit right? Why do you give loose fit g6,
Yes Right but this bearing block is with a lock nut, lock nut is enough to prevent slipping of shaft plus there is angular contact bearing in back to back arrangement which are already preloaded. So don't need to preload with an interface fit. Bearing preloaded adjustments video coming up
@@mastermechanicaldesign thank you sir
Thank you so much sir good information very useful.
You most welcome 😊😊
Make a video on pneumatic cylinder selection for leak testing fixture.
Yes Manivannan, I have noted ✒️✒️
Bro please make a complete vedio on tolerence stack up analysis
Sure brother 😊
I am waiting this this video thanku🎉🎉
Most welcome 😊
Please make one video on timing belt pulley selection
Sure Nicky 😊 Noted.
Why clearance fit,
Why not interference fit sir plz explain
Where, share time stamp
For bearing and coupling why we need clearance?
Eagerly Waiting for GD&T Masterclass
Very soon ❤️
Great sir...❤
Thank you so much 😊
Drafting learning
Sir, maintaining the 20micron Runout of lead screw is quite difficult in manufacturing when length crosses 500mm above
Yes, but here were not controlling the run-out for 500 mm, its controlled by specific datums
Dear sir, why should we draw the lead screw in 2d. Because we have select the standard one, like model:BTK 4010-5.3. then what is the need for draw the 2d, simply we can choose the standard and purchase. plz explain this sir.
Hi Rajesh, I am assuming you are asking why should we make ball screw end steps machining drawing. (Because this is not a drawing of ball screw, this is a ball screw end steps machining drawing)
- Why not simply purchase a ready-made machined end ball screw.
Yes, we can also buy machined end ball screw as per our application.. from manufacturers like Misumi, THK or Hiwin. But it will be expensive and will also take high delivery time.
But again, you have to give them a rough sketch or you have to give them the dimensional values of each diameter and length of each step.
So in my experience, it is always better to buy ball screws raw lengths and machine the ends yourself. As per application.
@@mastermechanicaldesign thank you sir....
13:35 and 17:52 how do you know this? You need to be more clear on this. Beginners like myself are scratching their heads; please explains
Lot of videos are coming soon on GD&T
from where we can learn the gdnt detailing
Better to lean from books, but main thing is practice of making drawings in GD&T standard. and for this here i have started a new series, please do checkout
😍😍👍👍👏👏👏
Thank you!
印度人吧?
Yes. I'm Indian
@@mastermechanicaldesign 你对 Solidworks MBD 熟悉吗?
Absolutely amazing session bro..
Glad you enjoyed it 😊
@@mastermechanicaldesign yes i did bro, also waiting for your GD&T master series