Thanks for the safety tips. Of all the tools in the shop, I have injured myself more with an angle grinder than anything, and I try to be safe. A few things I've learned: 1) After grinding a piece of steel, it gets very hot -- don't forget it. 2) A grinding wheel will cut through your skin a lot faster than metal -- it will take time to heal. 3) Wire wheels usually throw off wires at high speed -- they penetrate easily through cloth, so think how much easier they will go into your eye. 4) Don't think it will make you look like a pro if you take the guard off.
@@ve2jgs Greg, the angle grinder is a very useful tool after welding and during other metalworking operations. Kind of like fire, you use it but you always respect it. Grinders are like any other power tool in the sense that they have no conscience, and can do damage to the operator just as quickly they can to the part being ground. I use grinders often, but I'm always trying to be aware.
Great tip to pass on-zip tie your wheel wrench to the plug-end of a corded grinder. Not only will you never lose your key, you’ll never forget to unplug the power when changing out a disc. (Can’t remember where I picked this up, but thanks to original source! Works like a charm.) Tim, you do a fantastic job and your videos are my favs. I’ve learned so much from your channel. 🙏
A simple tip, a massive difference. Not only for the safety issues but when you have your mind focus on doing something there is no biggest disruption of your thought process than looking for the damn wrench, which is always out of place or missing. It also works for the drill key.
@@jonfisher9214Nothing, you just use your hands (preferably with gloves) to pull the disc (counter clockwise) while holding the button with the thumb of the other hand. Then when you change the disc, tighten the nut with your hand as much as you can and finish the tightening by pulling the disc (clockwise) with your hand. I worked in trades for years and you will almost never see someone on construction site using the wrench.
Wow. This is a how-to video of precision and perfection. There isn't a single word wasted yet the information is abundant, to the point, and all in order. There are no jump-cuts, no pauses, no annoying background music. I played it repeatedly to learn about this tool but I also played it to appreciate the first rate job you did. Thank you.
Nice video. I recently started using an angle grinder for cutting angle steel, and for removing old paint, primer & rust from a steel I beam bridge. We found that the Bauer Surface Conditioning Tool with the 40 Grit Stripping Drum was superb at removing a large swath right down to the bare metal, but we needed angle grinders with both the knotted & wire cup brushes to get into the tight curves & welded corners. Together both tools did a great job getting down to bare steel, so we could come back in paint with a metal primer & a top coat to restore the steel bridge to very good condition. I wore a Tyvek coverall w/ hood, booties, safety goggles, 3M P95 respirator and gloves because these tools really throw out some fine grindings that you don't want to breathe or get in your hair, skin or clothes, for that matter. We also used a large tarp to catch the grindings rather than let them get into the environment. Take care of yourself, take care of your fellow workers and take care of the environment. And use the right tools to get the job done efficiently.
Just purchased my first personal grinder and full face shield. The grinder at my work always made me super nervous to use, no guard and no handle. Great tips! Feeling so much better now
I can certainly agree about wearing safety equipment for your face with these, or even Dremel type tools. Just a couple of weeks ago, I was wearing safety glasses and a face shield, and still got something in my right eye. I was moving around a large part I welded together, and didn’t realize that the massive sparking was traveling around the wheel as I was moving. It ended moving around right at my face. That’s a huge amount of sparks. One managed to get through, and in my eye. Fortunately, it wasn’t too hot when it got there likely bouncing around inside my gear before entering my eye. But, if I didn’t have that protective gear, I could have had a massive problem. I’ve been doing this for a long time, and I’m normally pretty careful (don’t listen to these guys on UA-cam who tell you to take the guards off the grinders). But the more you do, the greater chance something will go wrong. Don’t be stupid, it’s not manly to go blind.
Don’t ever take that guard off I’m a welder but I did roofing work with my father and some idiot from the other company said this how a real man uses a grinder took the guard off cut some metal the disc broke and cracked hit the dude in his shoulder and by his neck
Great post Tim. I tend to have 3 grinders on the go at any one time. 1 with a cutting disk, 1 with a grinding disk and one with a wire cleaning wheel. I used to use my grinders without a guard but after seeing many horror stories when things go wrong, I always use the guard and eye protection.
*Grinder 1: Cutoff wheel* *Grinder 2: Grinding wheel/flap disk* *Grind 3: Poly rust/strip disk - great for stripping alum etc of paint without cutting it in half*
Great video Tim.Also a good safety tip is: Keep your head and body out of the plane of rotation of the disc, because in the event of kickback or wheel failure, you're not in the most likely path of shrapnel. Also, gloves can be an entrapment hazard between the guard and the disc. Very impressed you said clamp the work and put both hands on the grinder - I see a lot of UA-camrs not doing this - very dangerous practice to hold the work with one hand and operate the grinder with the other.
Agreed, except I would recommend wearing gloves definitely with wire wheels and brushes. If your glove gets caught in-between the disk and the guard, it's in the wrong place to begin with. Just make sure your gloves fit... well like a glove. No flappy bits and strong fabric made for the purpose. They will keep your hands from being stripped to the bone.
I am 74 and purchased just yesterday, my first 115mm (4.5 inch) battery operated grinder however, I have yet to purchase any grinding or cutting discs while I research exactly what it is I need. Thank you for providing a large part of that information & knowledge ... I am that much nearer to selecting and purchasing my first disc or discs, with which to 'giving it a go!' Thank you again for sharing your knowledge and experience.
Thank you! Found your video by accident. But great to see you focus on Safety! The information you provide is great for new/future metal enthusiasts. For 15yrs, I have offered welding and metal working to mostly novice students. And Safety is a constantly being taught. At the end of the day, most students appreciate the safety aspect of my class. Again, thank you for your safety information.
Thank you very much , I ordered an angle grinder today and while I waiting it to be delivered, I thought it was wise to learn some tips since I have never used one before. Thank you once again for this video which was very helpful.
I got my first angle grinder two days ago. Today, i went out and got a 5 pack of metal cutting discs, a stone cutting disc, a hard metal grinding disc and a 40 grit flap disc. Ive got everything i need to grind away 😊
I rarely comment on UA-cam but could not pass this without saying what a fabulous and concise video this is. Thank you so much for this. I learned an awful lot. The only thing I would add is some safety glasses. I am sure this video will undoubtedly prevent many accidents
Tim, I gotta tell ya....I love your videos. I know all about grinders and wheels, but you do an awesome job of explaining things in such a simple way that I watch all your vids anyways. thanks man.
A LOT of information in a short period of time! This is an excellent primer for a new user but there is also a gem or two in here for even an experienced user. All in all this is an outstanding presentation! 😀
I have a project and realized I need to buy and operate a grinder. So I looked you up and I think I'm well prepared! Thank you so much for an enjoyable lesson on what to buy, how to handle it and especially the safety gear to use. I have ordered safety goggles and a flip-up face shield along with my grinder. I've subscribed to your channel. Thanks again.
Thank you so much for your videos! I recently learned to weld Stick and have been working with metal and grinders/cutoff wheels a lot at my new job. It’s all so new and unfamiliar to me and I mostly learn by observing and asking questions, but it’s great to watch your videos so I approach things with a bit of basic knowledge in my back pocket!
That was excellent. Learned heaps. Very little experience with an angle grinder, but I do own one. Think I am alot more informed in its use and safety.
This vid was exactly what I was needing for my cutting wheel/angle grinder, answer. (I have the same model Dewalt you have in the vid so it was perfect for me). Have referenced this channel for countless tips/procedures for all my welding. Thanks again for posting. 🇨🇦👍🏼
Superb detailed instruction, Thank you. When you're new to purchasing something, it's always a benefit when you have video's like yours that help what to look out for before buying.
Thank you so much! This was extremely informative. Now I feel like I can go into the store and make an informed choice for doing larger wood carving projects!
Hello Tim. I did learn from this video plus laugh a lot remembering mishaps that I have had in my shop. like paper towels catching fire because the sparks. and other things. I love your video and enjoy the very much. too bad you are on the other side of the world for me. really need friends in this type of job to share experience. you know. I learn to weld by doing it T.my church. during the 90's and started watching welding videos about weldingike 3 or 4 years ago. Greeting and Lot of blessing from Honduras
Tim I'm very happy that you explained the disc and which side of the Tom ring should be turned into the disc I was always confused with this and I only use my angle grinder as a home hobby on a rare occasion so I usually forget by the time I use it again.
Cordless is a must here on the farm. 75%+ of my single person repairs are in a pasture on a tractor, truck or Gator. The Hercules cordless can cut hog panels all day long.
Yes there are a lot of short patch up jobs and I spend 45min getting every tool tool together, forgetting one thing , go back, another 45min. 45 min repair. Drive back put everything up.
Great fucking detail...love all the small details for us that are clueless when it comes to any type of tools..I learned a ton..please keep the videos coming!!! 👏👏👏
My own experience with angle grinders has led me to the conclusion that YOU MUST USE GLOVES, at least with wire disks. If you have never been “bitten” by a wire wheel turning 12,000 rpm, it is hard to believe what damage they can do in the blink of an eye.
@@allanmears4218 I guess you pick your poison, but, unlike a lathe, drill press, router table, table saw etc. with handheld tools you have to worry about them jumping out of position and presenting a hazard from an unexpected direction. I have never been “grabbed” by, say, my Milwaukee Magnum wrist-snapper corded drill, though it is 8 amps and wants to rip all the tendons in my hands to shreds with torque.
On a bench grinder yea you wouldn't want to use gloves because they can suck you in but with battery powered hand tools you most definitely want to use gloves and always wear eye pro @allanmears4218
heyy. thank you very much for the tips o disc and for the safety somtimes we want to run forgeting the first rule. safety very usefull video. congratulations !!!
The second one is Halotron. I do some electronics work and this is a specialty extinguisher that won’t cause additional damage to electrical equipment.
Yes my friend," I also see you as a good teacher. I was a teacher myself but never a stick welding teacher. i have seen many videos but yours i liked most because the way you explain has a lot of sense (logic)
Only one tool frightens me more then my 9 1/4 circular saw and that’s my angle grinder in cutting mode! Thanks for your valuable information! I feel a lot more confident now.
I remember a situation at the construction site where several older workers gathered around to talk about something and one of them was setting up the angle grinder. The moment he turned it on, the disk exploded into million pieces. Luckily, everyone walked away without a scratch. Few minutes before that, a huge drillbit had snapped while being operated by another guy. Do these things happen on a regular basis? This was 3 years ago, and I was a fresh structural engineer. So after this and quite a few other accidents at that very site, I decided to pursue the rest of my career in the bureau. Thank you for making this video and make me feel a bit more comfortable with power tools.
This is a terrific video, packed with good information, well edited, and entertaining to watch. We're smart, and you acknowledge that by not repeating yourself. Thank you!
Hi Tim, thank you for the valuable information. I started using an angle grinder for embellishing some wood turned objects. How to safely use the angle grinder was explained very well in the literature that came with it. However, it was very difficult to try to understand the different discs And how to properly buy and use them as this information was not included. Great explanations and videos. Tina
Just discovered your excellent channel. A great introduction to angle grinding but there is one thing I don't think you mentioned. Most grinding and cutting discs have an expiry date beyond which they are not safe to use due to the adhesive that holds the grit getting weaker. It is usually printed on the inside ring of the disc. Not an issue if you get through discs regularly but DIYers may keep discs for years due to occasional partial usage.
Great post, but you missed a type of wheel that I find super useful. The scrubby pad kind, called a strip disk. It's great for cleaning material before welding and painting. It takes off mill scale and rust really well but doesn't take off much metal like a flap disk can.
I learned the hard way about wearing PPE with a grinder. Just got out of the hospital after getting a cloud of wood dust in my eye 2 days ago. My left eye is halfway closed, the left side of my face is swollen and painful. It was my stupid mistake for not wearing eye protection. Do not let this happen to you!!! EDIT: My left eye is infected with conjunctivitis from exposure to contaminants from the wood dust on my deck. Again, please learn from my mistake and don't take stupid and unnecessary risks like I did. Good PPE is definitely worth the investment. An ER and optometrist bill caused by carelessness and disregard to safety is NOT how you want to spend your time, money, and risk permanent damage to your health. Please hear me out and be safe!!
I got wood dust in my eye just fucking around with my best friend's ceiling mounted decoration the other day, looked straight into it and a stream of dust went straight down into my eyeball. Had to hold my eye under the shower for 15m, it was awful. I was so mad at myself for not using PPE.
Super glad I watched this it's been years since I've used a grinder and just started a new job where I have to relearn the skill and they removed the shield and provided no safety equipment I'm going get my own stuff 🤬
Great tips on how to hold for a cut! I have gotten a hot bit from a wire wheel, running on the wimpy cheap HF grinder, to somehow go around the face shield to hit my eyelid. So I'm gonna actually follow the guidelines I've seen that you still need to wear goggles under a face shield. I will agree that the trigger switch grinder is much nicer than the slide switch...
Thank you for your safety tips , according to my experience, I would like to share my experience. Angle grinder is very useful at the same time can be dangerous. It is an unpredictable powerful machine , specially more power and speed causing it more unpredictable. For those who have an accident , use the used one with lower RPM , use those with less watts , hold it tight, grip it right and stand comfortable expect that although you are doing all right, but something goes wrong.this machine kicks back and you have to control it tight .be alert at all the times , if you are tired do not work with this machine..
Thanks for the safety tips. Of all the tools in the shop, I have injured myself more with an angle grinder than anything, and I try to be safe. A few things I've learned: 1) After grinding a piece of steel, it gets very hot -- don't forget it. 2) A grinding wheel will cut through your skin a lot faster than metal -- it will take time to heal. 3) Wire wheels usually throw off wires at high speed -- they penetrate easily through cloth, so think how much easier they will go into your eye. 4) Don't think it will make you look like a pro if you take the guard off.
Thanks for the waning. Convinced me not to buy this overrated tool.
@@ve2jgs Greg, the angle grinder is a very useful tool after welding and during other metalworking operations. Kind of like fire, you use it but you always respect it. Grinders are like any other power tool in the sense that they have no conscience, and can do damage to the operator just as quickly they can to the part being ground. I use grinders often, but I'm always trying to be aware.
@@ve2jgsIt's not an overrated tool it's a tool often used improperly by amateurs who haven't bothered to educate themselves.
Should wear gloves when use this tool ? Saw a comment saying Not to wear
Thanks for sharing your experience. I decided not to touch this tool
I am 73 and just learning to work with tools. You are one of the best teachers I have met. Sir you know how to "keep it simple".
I agree. This was all killer, no filler.
Great tip to pass on-zip tie your wheel wrench to the plug-end of a corded grinder. Not only will you never lose your key, you’ll never forget to unplug the power when changing out a disc. (Can’t remember where I picked this up, but thanks to original source! Works like a charm.) Tim, you do a fantastic job and your videos are my favs. I’ve learned so much from your channel. 🙏
A simple tip, a massive difference. Not only for the safety issues but when you have your mind focus on doing something there is no biggest disruption of your thought process than looking for the damn wrench, which is always out of place or missing.
It also works for the drill key.
Great tip, automatic safety and efficiency.
You don’t need the wrench… unless it’s seized up
@@albertjowd8482 what would you use instead?
@@jonfisher9214Nothing, you just use your hands (preferably with gloves) to pull the disc (counter clockwise) while holding the button with the thumb of the other hand. Then when you change the disc, tighten the nut with your hand as much as you can and finish the tightening by pulling the disc (clockwise) with your hand. I worked in trades for years and you will almost never see someone on construction site using the wrench.
Wow. This is a how-to video of precision and perfection. There isn't a single word wasted yet the information is abundant, to the point, and all in order. There are no jump-cuts, no pauses, no annoying background music. I played it repeatedly to learn about this tool but I also played it to appreciate the first rate job you did. Thank you.
Nice video. I recently started using an angle grinder for cutting angle steel, and for removing old paint, primer & rust from a steel I beam bridge. We found that the Bauer Surface Conditioning Tool with the 40 Grit Stripping Drum was superb at removing a large swath right down to the bare metal, but we needed angle grinders with both the knotted & wire cup brushes to get into the tight curves & welded corners. Together both tools did a great job getting down to bare steel, so we could come back in paint with a metal primer & a top coat to restore the steel bridge to very good condition.
I wore a Tyvek coverall w/ hood, booties, safety goggles, 3M P95 respirator and gloves because these tools really throw out some fine grindings that you don't want to breathe or get in your hair, skin or clothes, for that matter. We also used a large tarp to catch the grindings rather than let them get into the environment. Take care of yourself, take care of your fellow workers and take care of the environment. And use the right tools to get the job done efficiently.
I've been using grinders for 38 years and couldn't find a flaw in your video mate, great stuff 👌
the first YT that shows angle grinders with the shrew or safety cover on the machines
Best video on angle grinders I have seen. Good man Tim and a million thanks
Just purchased my first personal grinder and full face shield. The grinder at my work always made me super nervous to use, no guard and no handle. Great tips! Feeling so much better now
Huge OSHA violation. Trust yr instincts if smtg feels unsafe.
I can certainly agree about wearing safety equipment for your face with these, or even Dremel type tools. Just a couple of weeks ago, I was wearing safety glasses and a face shield, and still got something in my right eye. I was moving around a large part I welded together, and didn’t realize that the massive sparking was traveling around the wheel as I was moving. It ended moving around right at my face. That’s a huge amount of sparks. One managed to get through, and in my eye. Fortunately, it wasn’t too hot when it got there likely bouncing around inside my gear before entering my eye.
But, if I didn’t have that protective gear, I could have had a massive problem. I’ve been doing this for a long time, and I’m normally pretty careful (don’t listen to these guys on UA-cam who tell you to take the guards off the grinders). But the more you do, the greater chance something will go wrong. Don’t be stupid, it’s not manly to go blind.
Don’t ever take that guard off I’m a welder but I did roofing work with my father and some idiot from the other company said this how a real man uses a grinder took the guard off cut some metal the disc broke and cracked hit the dude in his shoulder and by his neck
I'd say it's not manly to be stupid
@@tummytub1161 absolutely!.
Going blind is ghey
And wear good leather gloves to help protect your hands.
Great post Tim. I tend to have 3 grinders on the go at any one time. 1 with a cutting disk, 1 with a grinding disk and one with a wire cleaning wheel. I used to use my grinders without a guard but after seeing many horror stories when things go wrong, I always use the guard and eye protection.
Thanks! 3 seems to be the magic number for me as well.
*Grinder 1: Cutoff wheel*
*Grinder 2: Grinding wheel/flap disk*
*Grind 3: Poly rust/strip disk - great for stripping alum etc of paint without cutting it in half*
@@1nvisible1 but.
@@markslates8324bbɓ😊ĥ😂
Great video Tim.Also a good safety tip is: Keep your head and body out of the plane of rotation of the disc, because in the event of kickback or wheel failure, you're not in the most likely path of shrapnel. Also, gloves can be an entrapment hazard between the guard and the disc. Very impressed you said clamp the work and put both hands on the grinder - I see a lot of UA-camrs not doing this - very dangerous practice to hold the work with one hand and operate the grinder with the other.
ni
ni
Point taken
Agreed, except I would recommend wearing gloves definitely with wire wheels and brushes. If your glove gets caught in-between the disk and the guard, it's in the wrong place to begin with. Just make sure your gloves fit... well like a glove. No flappy bits and strong fabric made for the purpose. They will keep your hands from being stripped to the bone.
I hold the tile I’m cutting with my bare feet and hold the grinder with two hands
I am 74 and purchased just yesterday, my first 115mm (4.5 inch) battery operated grinder however, I have yet to purchase any grinding or cutting discs while I research exactly what it is I need. Thank you for providing a large part of that information & knowledge ... I am that much nearer to selecting and purchasing my first disc or discs, with which to 'giving it a go!' Thank you again for sharing your knowledge and experience.
do you think they'll rig the election or physically remove trump?
I ordered an angle grinder earlier today and happy I came across your video. Incredibly informative for novices like me! Thank you!
I just bought a ginder today with multiple different wheels... then drive home and see you posted this. Perfect timing!
Thank you! Found your video by accident. But great to see you focus on Safety! The information you provide is great for new/future metal enthusiasts.
For 15yrs, I have offered welding and metal working to mostly novice students. And Safety is a constantly being taught. At the end of the day, most students appreciate the safety aspect of my class.
Again, thank you for your safety information.
Thank you very much , I ordered an angle grinder today and while I waiting it to be delivered, I thought it was wise to learn some tips since I have never used one before. Thank you once again for this video which was very helpful.
I got my first angle grinder two days ago. Today, i went out and got a 5 pack of metal cutting discs, a stone cutting disc, a hard metal grinding disc and a 40 grit flap disc. Ive got everything i need to grind away 😊
As a newbi to angle grinders your video is unequalled! Great video, Thank you.
I rarely comment on UA-cam but could not pass this without saying what a fabulous and concise video this is. Thank you so much for this. I learned an awful lot. The only thing I would add is some safety glasses. I am sure this video will undoubtedly prevent many accidents
Tim, I gotta tell ya....I love your videos. I know all about grinders and wheels, but you do an awesome job of explaining things in such a simple way that I watch all your vids anyways. thanks man.
Thank you,
There is so much I am learning about metal fabrication tools and welding
A LOT of information in a short period of time! This is an excellent primer for a new user but there is also a gem or two in here for even an experienced user. All in all this is an outstanding presentation! 😀
Great vid - packed with useful information - many thanks. Short and sweet, yet surprisingly comprehensive - because no waffle.
Very mood video. All killer, no filler! Grinder wheels were always a mystery to me and this certainly clears up some of my questions for sure.
Good greeting from an Iraqi Arab guy I respect you and all craftsmen ❤️
I have a project and realized I need to buy and operate a grinder. So I looked you up and I think I'm well prepared! Thank you so much for an enjoyable lesson on what to buy, how to handle it and especially the safety gear to use. I have ordered safety goggles and a flip-up face shield along with my grinder. I've subscribed to your channel. Thanks again.
Great video. It's been awhile since I used a grinder but your video helped to refresh an old man's memory. Thanks for a great video
Thanks for another excellent video! I'm returning to welding and metal work after many years away, your videos are super helpful, keep 'em coming.
Very well explained. Great tips and safety precautions. You covered everything. Will check out more videos as well. Thanks a bunch.
Thank you so much for your videos! I recently learned to weld Stick and have been working with metal and grinders/cutoff wheels a lot at my new job. It’s all so new and unfamiliar to me and I mostly learn by observing and asking questions, but it’s great to watch your videos so I approach things with a bit of basic knowledge in my back pocket!
You're one hell of a mechanic you work on everything and anything just like me I used to work
The video I was looking for! Thank you so much! Quick, informative and super high quality.
That was excellent. Learned heaps. Very little experience with an angle grinder, but I do own one. Think I am alot more informed in its use and safety.
This vid was exactly what I was needing for my cutting wheel/angle grinder, answer. (I have the same model Dewalt you have in the vid so it was perfect for me). Have referenced this channel for countless tips/procedures for all my welding. Thanks again for posting. 🇨🇦👍🏼
Superb detailed instruction, Thank you. When you're new to purchasing something, it's always a benefit when you have video's like yours that help what to look out for before buying.
another channel extremely perfectly presented with great information. in this case for someone who has not used an angle grinder before.
Thank you so much! This was extremely informative. Now I feel like I can go into the store and make an informed choice for doing larger wood carving projects!
This video was great! Thank you for making it. I learned so much about angle grinders.
Excellent video thank you. Answered all my beginners questions.
This is one of the best of this type of video I've ever seen.
wow amazing what a great video - I was winging it with my new 4 1/2", this really helped me out thanks for the great tutorial 🔥
Thanks for all the information, especially the safety information!
Thanks Tim...as a Boomer looking to start welding for a hobby, your videos offer a lot of great info in all areas.
great video-a lot of common sense and ideas for newer welders!
Simple, informative and to the point videos ........thanks
What would you use to cut tin?
Great video! Thank you for the instruction and the safety pointers.
Thanks
Answered my question at 3:14 flipping the nut over.
Buying my first angle grinder today. Thank you.
You are a great teacher. Thank you for sharing your knowledge.
Hello Tim.
I did learn from this video
plus laugh a lot remembering mishaps that I have had in my shop.
like paper towels catching fire because the sparks. and other things.
I love your video and enjoy the very much.
too bad you are on the other side of the world for me.
really need friends in this type of job to share experience.
you know.
I learn to weld by doing it T.my church. during the 90's and started watching welding videos about weldingike 3 or 4 years ago.
Greeting and Lot of blessing from Honduras
- Thanx a multimillion for sharing clear, relevant info on using my angle grinder.
Your comment was 3 months ago. What did you do? Did it work?
Really helpful, clear explanations too, big fan
Tim I'm very happy that you explained the disc and which side of the Tom ring should be turned into the disc I was always confused with this and I only use my angle grinder as a home hobby on a rare occasion so I usually forget by the time I use it again.
Cordless is a must here on the farm. 75%+ of my single person repairs are in a pasture on a tractor, truck or Gator. The Hercules cordless can cut hog panels all day long.
Yes there are a lot of short patch up jobs and I spend 45min getting every tool tool together, forgetting one thing , go back, another 45min. 45 min repair. Drive back put everything up.
You are an effective teacher.
A heartfelt thank you. I had no idea what which grinder to choose, but most importantly, what are the different grinding wheels for.
Thank you for shating all the grinding, cutting, and safety info
Great fucking detail...love all the small details for us that are clueless when it comes to any type of tools..I learned a ton..please keep the videos coming!!! 👏👏👏
Nice explanations on small tips I didn’t realize. If I were using a grinder all day long I’d definitely use a respirator, not a drywall dust mask.
My own experience with angle grinders has led me to the conclusion that YOU MUST USE GLOVES, at least with wire disks. If you have never been “bitten” by a wire wheel turning 12,000 rpm, it is hard to believe what damage they can do in the blink of an eye.
I will never use gloves with any rotating machinery. Too much chance of it grabbing you.
@@allanmears4218 I guess you pick your poison, but, unlike a lathe, drill press, router table, table saw etc. with handheld tools you have to worry about them jumping out of position and presenting a hazard from an unexpected direction. I have never been “grabbed” by, say, my Milwaukee Magnum wrist-snapper corded drill, though it is 8 amps and wants to rip all the tendons in my hands to shreds with torque.
Afaik wire wheels are rated at lower rpm than 12000. Last one I bought is rated at 8000rpm
I got hurt and cut a mast chunk out of my finger with an angle grinder. I took the the guard off too. Was a bad idea.
On a bench grinder yea you wouldn't want to use gloves because they can suck you in but with battery powered hand tools you most definitely want to use gloves and always wear eye pro @allanmears4218
heyy. thank you very much for the tips o disc and for the safety
somtimes we want to run forgeting the first rule. safety
very usefull video. congratulations !!!
Wow, that's a great video. Just got a grinder to make mods for my smoker. I now have a plan of attack. Thanks
Excellent video. 👍
Additionally, I like the idea of a second fire extinguisher in case the first one catches fire.
The second one is Halotron. I do some electronics work and this is a specialty extinguisher that won’t cause additional damage to electrical equipment.
Thank you very informative!! Im a girl. Dad never taught us about tools. I love remodeling, repurposing.
Yes my friend," I also see you as a good teacher. I was a teacher myself but never a stick welding teacher. i have seen many videos but yours i liked most because the way you explain has a lot of sense (logic)
Only one tool frightens me more then my 9 1/4 circular saw and that’s my angle grinder in cutting mode!
Thanks for your valuable information! I feel a lot more confident now.
Really appreciate your video, as an novice.
Wonderful skill and creativity !
I remember a situation at the construction site where several older workers gathered around to talk about something and one of them was setting up the angle grinder. The moment he turned it on, the disk exploded into million pieces. Luckily, everyone walked away without a scratch. Few minutes before that, a huge drillbit had snapped while being operated by another guy. Do these things happen on a regular basis? This was 3 years ago, and I was a fresh structural engineer. So after this and quite a few other accidents at that very site, I decided to pursue the rest of my career in the bureau. Thank you for making this video and make me feel a bit more comfortable with power tools.
Excellent video Tim. I always snap my used discs in half so people (my grandfather) don't take them out of the garbage and try to use them!
Great idea. I'm the type to take stuff out of the trash and use it 😂
thanks for this bro. from the Philippines
This is a terrific video, packed with good information, well edited, and entertaining to watch. We're smart, and you acknowledge that by not repeating yourself. Thank you!
Just picked up a corded DeWalt today.
Thanks so much. I am looking to take the paint off of my cinder block walls in my basement for painting.
If new to grinders this video will answer a lot of your questions
Yours is my favorite of all the welding channels I've seen (and I've seen many). Thanks for this great angle grinder primer! It's exactly what I need!
Outstanding Video... Thank you, I learned a lot from your video, its greatly appreciated!!
Great explanation!
Dude!!! Awesome video. Been a handyman for a little over a year and just now having to educate myself about grinders
Very instructive , as usual 👍🏾👍🏾👍🏾👍🏼👍🏼👍🏼
Thank you for the lesson beginning at 3:00
great explaination for a newbie like me.. thanks
Lotta info, FAST! Love it!
Hi Tim, thank you for the valuable information. I started using an angle grinder for embellishing some wood turned objects. How to safely use the angle grinder was explained very well in the literature that came with it. However, it was very difficult to try to understand the different discs And how to properly buy and use them as this information was not included. Great explanations and videos. Tina
Excellent video and great info. Thanks!
Thank you for all the tips.The info is appreciated thank you
Just discovered your excellent channel. A great introduction to angle grinding but there is one thing I don't think you mentioned. Most grinding and cutting discs have an expiry date beyond which they are not safe to use due to the adhesive that holds the grit getting weaker. It is usually printed on the inside ring of the disc. Not an issue if you get through discs regularly but DIYers may keep discs for years due to occasional partial usage.
Nice summary and video in general!
Super informative - big up yourself
Thanks for another great video!
You are welcome! Thanks for the comment!
wonderful educational video, thank you for the knowledge
Great post, but you missed a type of wheel that I find super useful. The scrubby pad kind, called a strip disk. It's great for cleaning material before welding and painting. It takes off mill scale and rust really well but doesn't take off much metal like a flap disk can.
Very Nice and informative 👍
Very informative Tim. Thanks
I learned the hard way about wearing PPE with a grinder. Just got out of the hospital after getting a cloud of wood dust in my eye 2 days ago. My left eye is halfway closed, the left side of my face is swollen and painful.
It was my stupid mistake for not wearing eye protection. Do not let this happen to you!!!
EDIT: My left eye is infected with conjunctivitis from exposure to contaminants from the wood dust on my deck. Again, please learn from my mistake and don't take stupid and unnecessary risks like I did. Good PPE is definitely worth the investment. An ER and optometrist bill caused by carelessness and disregard to safety is NOT how you want to spend your time, money, and risk permanent damage to your health. Please hear me out and be safe!!
I got wood dust in my eye just fucking around with my best friend's ceiling mounted decoration the other day, looked straight into it and a stream of dust went straight down into my eyeball. Had to hold my eye under the shower for 15m, it was awful. I was so mad at myself for not using PPE.
Super glad I watched this it's been years since I've used a grinder and just started a new job where I have to relearn the skill and they removed the shield and provided no safety equipment I'm going get my own stuff 🤬
Great tips on how to hold for a cut!
I have gotten a hot bit from a wire wheel, running on the wimpy cheap HF grinder, to somehow go around the face shield to hit my eyelid. So I'm gonna actually follow the guidelines I've seen that you still need to wear goggles under a face shield.
I will agree that the trigger switch grinder is much nicer than the slide switch...
Thank you for your safety tips , according to my experience, I would like to share my experience.
Angle grinder is very useful at the same time can be dangerous. It is an unpredictable powerful machine , specially more power and speed causing it more unpredictable. For those who have an accident , use the used one with lower RPM , use those with less watts , hold it tight, grip it right and stand comfortable expect that although you are doing all right, but something goes wrong.this machine kicks back and you have to control it tight .be alert at all the times , if you are tired do not work with this machine..
Working tired is like working while drinking...oops.