Please kindly note that the JC Assistant Software is only compatible with Windows so far. And the system for JC V1 should be V1.4 and above, so that it can support HO3 and OEM with H-IC Screens, when you connnect V1 with the JC Assistant, it will upgrade the system auotmatically.
It works! You need to buy a screen with the eeprom chip! Ask the seller before you buy. It’s gonna kill the display and front camera at first but all you need to do is reset the phone and the display will come back on, then reset again and front camera will start working again.
Is it possible to transfer true tone from the original apple screen to another refurbished genuine apple screen? Or does the new screen have to be an aftermarket screen?
I follow your steps, software read data from the iphone and programmed back all data on OEM Screen but no TrueTone. Only i don´t know if is the original frontcamera. Must it be the first original camera from factory or is another original camera enough?
Hi, I have a JC PRO1000. I have removed the NAND from iPhone but the programmer can't read this NAND. Ther is an error message or the reading stop at 51%. What can I do if the NAND is damaged? Thank you.
Hi, to solve your concern, you need to provide more details about the device you used together with the JC PRO1000 to the seller you bought the device from, for example, which model you tried to read? And what tester you used. :)
@@HcqsUs Thank you for your reply. It is an iPhone 6s, A1688, gold and I know the IMEI, nothing else. Can you send a video or step by step instructions what need to do, please? I have a new NAND. Thank you again.
@@drummonkey7 We have a playlist called JC programmer, where has a exist video for JC PRO1000, please check it out:ua-cam.com/video/qAyEoJPbmSU/v-deo.html
Yes, it supports restore the true tone function with the right board set, you can shop the device here: hcqs.shop/jc-v1-programmer-restore-true-tone-w-o-original-screen-for-iphone-7-11-pro-max.html
Hi @HCQS, can the jc v1 restore true tone with out original parts and with out HO3 screen?, and when the restore true tone progress, the camera and the earspeaker must be installed to the screen?
Hi, can you help me? I tried to fix true tone on iPhone xr without reading data from previous lcd as it is showen in video. I conected iphone and then jc v1 with lcd, i done everything as it was shown in your video but it is not working. No true tone and dissabled autobrightness. Any solution or advice? iOS 13.3
Does this also fix the missing “Auto Brightness” setting after a screen replacement? I replaced my screen and for some reason I no long see the “Auto Brightness” on/off slider button.
Can you help me please! When I connect iphone to pc (win10), JC Repair Assistant cant detected this phone and i cant read serial, fix truetone and other... How Can I fix this problem please?
When u do it, does the colors on the screen looks like on the original one? Can u notice the differencw between original and replacement one by the look of colors?
@@HcqsUs Hi, can i restore true tone without original screen on iphone XR? LCM number is missing, program reads just MtSN from phone and it doesnt work.
Hi whenever I try get the lcm it won’t let me it just says n/a I have even tried it on a phone that has had never been repaired it the any other way on getting the lcm
Hello, when I connect my iPhone to the PC to fix truetone, it says "device not connected" after the data analysis is complete. Could be an iOS13 problem?
Hi, did you complete the true tone restoration? Normally, when we encounter the same situation, it is because of the lightning to USB cable is not certified.
I have a sincere hatred for Apple. My JC-V1 can't reenable the Xs True Tone, it say device no supported even though it's supposed to be. If I install new earspeaker assembly, the device bootloop. I installed a new battery and it give me notification of not original battery and wont give me the battery health status. You are not owning the device when you buy it.
Hi, i recently bought a used iPhone X and i noticed the lack of true tone option only after few days, so i supposed that it is not the original display, even if it seems an oled one and it performs really well, in terms of colours and response. Is there a way to determine what kind of display is (refurbished, aftermarket, etc)? How can i be sure that the front camera is the originale one? Can i restore the true tone functionality, not having access to the original display? Where i can download JC Assistant Software from? Thanks!
Hi, Alessandro, the truth is no matter what quality screen you have replaced, the true tone function will always be disabled and needs to be restored through certain tools as you see in this video, good luck man :)
I bought the jc v1 but i cant register an account in the software? If I press captcha nothing happens and i dont get an email. Anybody knows how to fix that? Im using windows 10
HCQS already tried 2 computers and different mail adresses, but I tried it today and it worked. I think it was a server problem from them ? Thanks for the quick answer tho 👍🏻
HO3 (O for original :)) is developed by our own R&D team, aim to providing excellent quality screens with good price to our customers. Now we have I series (close to original) and G series (high cost effective) screens for iPhone. You can get more information in HO3 website www.ho3tech.com, and welcome to contact us if you are interested in buying some HO3 screens via info@hcqs.com.cn
WARNING!!!!! There's absolutely no customer support for this company. When registering, it asks for a "verification code," which never gets sent. If you have any issues, you're legitimately on your own. Buyer: BEWARE!!!!!
Please kindly note that the JC Assistant Software is only compatible with Windows so far. And the system for JC V1 should be V1.4 and above, so that it can support HO3 and OEM with H-IC Screens, when you connnect V1 with the JC Assistant, it will upgrade the system auotmatically.
HCQS Will this work with a genuine OEM screen or only with an H03 screen?
@@devinmarx5032 Hi Devin, it works on both screens, both OEM and HO3
Your website is jacked.
@@hawaiisidecar Hi, may I know which website?
Still having "Device Not Connected" issue. Am I using the wrong aftermarket screen?
It works! You need to buy a screen with the eeprom chip! Ask the seller before you buy. It’s gonna kill the display and front camera at first but all you need to do is reset the phone and the display will come back on, then reset again and front camera will start working again.
Thank you. This worked like a charm.
Thank you for this video ! Have you tried the JC V1 with an iphone SE2020 ?
Is it possible to transfer true tone from the original apple screen to another refurbished genuine apple screen? Or does the new screen have to be an aftermarket screen?
Box Show Device Not Connected When i click fix true tone buttons
Just using 2 lightning cables
I follow your steps, software read data from the iphone and programmed back all data on OEM Screen but no TrueTone. Only i don´t know if is the original frontcamera. Must it be the first original camera from factory or is another original camera enough?
hi. is that work with iphone 11
So if I replace an original screen i don’t need to follow this process to True Tone work ?
Super!
I don't have my old lcd anymore, can true tone still be restored?
Yes
hai..this process applicable for fingerprint sensor without original fingerprint sensor?
hi i have a iphone x and it would let me click fix true tone its just grayed out please help
Does this device work with 32 bit windows 7 operating system ?
Hi, I have a JC PRO1000. I have removed the NAND from iPhone but the programmer can't read this NAND. Ther is an error message or the reading stop at 51%. What can I do if the NAND is damaged? Thank you.
Hi, to solve your concern, you need to provide more details about the device you used together with the JC PRO1000 to the seller you bought the device from, for example, which model you tried to read? And what tester you used. :)
@@HcqsUs Thank you for your reply. It is an iPhone 6s, A1688, gold and I know the IMEI, nothing else. Can you send a video or step by step instructions what need to do, please? I have a new NAND. Thank you again.
@@drummonkey7 We have a playlist called JC programmer, where has a exist video for JC PRO1000, please check it out:ua-cam.com/video/qAyEoJPbmSU/v-deo.html
@@HcqsUs Great video, but there is no answer to my question. I have a solution to my NAND issue now. If anyone has the same problem just ask me.
@@drummonkey7 i have the same problem
Eu troco placa iphone aí aparece tela genuida fala como faço pra resolver com esse pograma vou conseguir fazer?
Does it work in case of iPhone 11 Pro max
great useful video! Thank You very
Thank you for your comment~ cheers
does it restore true tone function on iphone 11 pro max when you dont have the original screen?
Yes, it supports restore the true tone function with the right board set, you can shop the device here: hcqs.shop/jc-v1-programmer-restore-true-tone-w-o-original-screen-for-iphone-7-11-pro-max.html
Hi, if this procedure has not happened, will the colors also be worse than original (less vibrant and washed out)?
I can't speak on that, but without this the TrueTone option isn't present
Hi @HCQS, can the jc v1 restore true tone with out original parts and with out HO3 screen?, and when the restore true tone progress, the camera and the earspeaker must be installed to the screen?
hello, JC V1 can restore truetone as long as you screen have turetone function, Please note that the front camera should be original
@@HcqsUs Do i need to connect the phone to JC repair first or can i go straight to step 2 -> connect to programmer and restore true tone?
@@SamsungS-or1qf please as our video step
@@HcqsUs hi. Does the front camera need to be original to the motherboard or just needs to be OEM?
Do all screens come with EEPROM chip? Or depends on manufacturer?
no, not all screens can be programmed
Hi, can you help me? I tried to fix true tone on iPhone xr without reading data from previous lcd as it is showen in video. I conected iphone and then jc v1 with lcd, i done everything as it was shown in your video but it is not working. No true tone and dissabled autobrightness. Any solution or advice? iOS 13.3
Same here.
any luck?
Hi could you also do this with home button without original home button?
Does this also fix the missing “Auto Brightness” setting after a screen replacement? I replaced my screen and for some reason I no long see the “Auto Brightness” on/off slider button.
Hi, Jason, the HO3 programmer box could help you fix this problem: bit.ly/2V9sgDO
Supports iPhone 8 Plus without built-in LCD
When I connect my 3rd party screen it just says “not connected”
Your AM screen doesnt have the required chip to retain the tru tone information most likely.
@@base74258 Fawk
Hi, will this fix the Apple display message that saids unable to verify the iPhone has a genuine Apple display?
not yet
iphone 11/11 pro does not support truetone display fixed without original screen what about this? Why it cant be restored???
This functionality can be restored with JC V1S
Can you help me please! When I connect iphone to pc (win10), JC Repair Assistant cant detected this phone and i cant read serial, fix truetone and other... How Can I fix this problem please?
I have the same problem, did you fix it?
@@michimanismus no :/
11 Pro Max capable?
Can this remove the message from iPhone for using non-genuine replacement LCD
Hi, thank you for your message, no, unfortunately, this programmer can't remove such message
👏👏👏👏👏👏👏👏
After true tone restoation does it stay permanently or can be removed by update, restore and reset?
It stays permanently till you replace another new screen. Then you need to restore it again.
@@HcqsUs oh thank you so much!
You must pay for JC Assistant Software?
Antonio Fernandes no
Will it fix iPhone 11 message “Unable to verify this iPhone has genuine Apple display”?
no programmar can do it
When u do it, does the colors on the screen looks like on the original one? Can u notice the differencw between original and replacement one by the look of colors?
Why I couldnt find “Fix Truetone” menu on the JC Repair Assistant installed on my PC ? There’s just “Create” & “Instruction” only ?
Is your operating System windows 7 in mini netbook?
Is there any solution to restore True Tone for replaced front camera
JC programmar cant do it if you change front camera
Can I use the JC V1 for other screens too, that is’nt HO3?
yes jc-v1 can work for most screens in market
can it support for xs max without original screen?
Hi, thank you for your comment, for iPhone 7-XS MAX, it can restore True Tone without the original screen.
@@HcqsUs and without original front camera?
@@HcqsUs Hi, can i restore true tone without original screen on iphone XR? LCM number is missing, program reads just MtSN from phone and it doesnt work.
@@richard11027 Yes, you can, launch the JC repair assistant, and it will read all the important data for you
Hi whenever I try get the lcm it won’t let me it just says n/a I have even tried it on a phone that has had never been repaired it the any other way on getting the lcm
(The screen serial code)
I followed all the steps but It wont bring back the true tone. I get everything correct. Any other tips? thanks
May I know which quality of the screen that you are trying to restore the true tone function?
@@HcqsUs i tried on both. OEM and AM
everything in the steps worked for me but true tone doesnt come back....using original screen
did you solve this problem?
Hello, when I connect my iPhone to the PC to fix truetone, it says "device not connected" after the data analysis is complete. Could be an iOS13 problem?
Hi, did you complete the true tone restoration? Normally, when we encounter the same situation, it is because of the lightning to USB cable is not certified.
@@HcqsUs I have same issue, does this mean it will only work with genuine apple cable lead?
I Have same issue when i click fix true tone show device not connected help please
same here. what driver need to install???
I have a sincere hatred for Apple. My JC-V1 can't reenable the Xs True Tone, it say device no supported even though it's supposed to be. If I install new earspeaker assembly, the device bootloop. I installed a new battery and it give me notification of not original battery and wont give me the battery health status. You are not owning the device when you buy it.
I bought jc pro 1000 with screen connector board, would this work on that?
Hi, the JC Pro 1000 won't support the V1 unfortunately, the V1 needs to connect to internet to work.
I've replaced the front camera (iPhone 8) with the screen as well... is it possible to restore it? I still have all previous parts fortunatelly.
The front camera should be original. Otherwise, it can't read the data correctly.
Sir aap kaha se ho plz reply
Can we fix xs max Vibrator without Original part
yes it's ok
can you tell me how it's possible
@@amitroushan2761 sorry i mean use the JC V1 programmar is ok
What’s the name of the music?
👍👍👍👍👍👍
How to restore true tone after replacing front camera
I believe that is currently not possible.
Maybe change the lcd with the camera replacement as well and program the bew screen
*new
link aliexpress please...
Hi, thank you for your comment, you are welcome to register on our online shopping mall: www.hcqs.eu, we got all products and prices there
Possible with battery
JC-V1S can work for battery
Hi, i recently bought a used iPhone X and i noticed the lack of true tone option only after few days, so i supposed that it is not the original display, even if it seems an oled one and it performs really well, in terms of colours and response. Is there a way to determine what kind of display is (refurbished, aftermarket, etc)? How can i be sure that the front camera is the originale one? Can i restore the true tone functionality, not having access to the original display? Where i can download JC Assistant Software from? Thanks!
Hi, Alessandro, the truth is no matter what quality screen you have replaced, the true tone function will always be disabled and needs to be restored through certain tools as you see in this video, good luck man
:)
@@HcqsUs Thank you, i'm gearing up to do it ^^
I bought the jc v1 but i cant register an account in the software? If I press captcha nothing happens and i dont get an email. Anybody knows how to fix that? Im using windows 10
we also dont meet same problem, can you try to use another computer or email regist it?
HCQS already tried 2 computers and different mail adresses, but I tried it today and it worked. I think it was a server problem from them ? Thanks for the quick answer tho 👍🏻
@@kilianholland6896 it's possible, anyway glad to hear it can work now
Connecting phone to this software it say "device not Connected" anyone know how to sort this please?????
Please check the lightning cable. Sometimes it happens if the cable can't be identified.
@@HcqsUs Thanks, I had to install a drive from the Driver list.
Samson ite hello sir i need your help
What driver helped to solve this?
@@HcqsUs Which Driver needs to be installed?
What is h03 display?
HO3 (O for original :)) is developed by our own R&D team, aim to providing excellent quality screens with good price to our customers. Now we have I series (close to original) and G series (high cost effective) screens for iPhone. You can get more information in HO3 website www.ho3tech.com, and welcome to contact us if you are interested in buying some HO3 screens via info@hcqs.com.cn
WARNING!!!!! There's absolutely no customer support for this company. When registering, it asks for a "verification code," which never gets sent. If you have any issues, you're legitimately on your own. Buyer: BEWARE!!!!!