I watched this video and istalled my handlebar adjuster in less than an hour. Easy peasy!! I actually added an adjustable and a straight. Thank you so much!! Now I sit up straighter, with much less pressure on my wrists.
Nice view of the two options. I especially like that you are tall (I'm 6'5") as few reviewers talk about these options for taller guys. Also, I especially appreciate that you used the exact same bike side by side with only the stem change different. Too many reviewers don't have side by side, but end-to-end comparisons and it's hard to tell the real differences. Well done. I like the upright posture better for two reasons - my back and my neck. As a taller rider, I find lower bars make me hunch over and my back gets sore after about 30 minutes. As a result of being hunched over, I now have to hyper-extend my neck so my face if forward. That puts strain on my neck. So altogether, an upright posture is better for me since I'm not doing mountain trails, speeding down a race track or stuff a 20 yo would do. Thanks again for the review.
Happy to help! And thanks for all the positive notes. We will make sure to do side by side comparisons like this more often with other bike products we have. Was there anything else you'd like to know about this?
Thanks for this Video. I installed mine and was frustrated at first because I couldn't get the head tightened up enough and had a lot of slop in the head making my fork set super sloppy. After messing around a lot I was bale to get the stem tightened down enough to stop the loose head. The stem extension is the only way to go for improved rider position if you have a bad back. More up right and makes my riding position much more enjoyable.
My wife and I are vertically challenged, and we both found help this way. Handlebars that swept back were dismissed as destroying the balance and feel for the front wheel. Very easy installation on our Lectric XP 2.0
I just bought a 49 North adjustable stem. I needed to raise the handlebars on my commuter bike after back surgery. It works great. Be careful to tighten the pivot screw properly that levers the forward arm. It takes 12-13 newton meters of torque (108 - 117 inch pounds of torque)! You probably should use a torque wrench. Those e-bikes are nice, but they're never going to be "aero" machines no matter what you do.
Hi !!! finally i fund a video showing how are the differences between this kind stem's on the real world The best example riding both models Thank you.
Since I put on my satori adjustable stem, I sit upright which gives a more comfortable seating position and I don’t slide towards the front of the seat like before. Also the leg drive is more isolated in that position since that forward leaning weight isn’t there to help your pedaling. Much better than that flat stock stem that was installed on my Aventon Level 2.
It's definitely worth it. Here is the link to ours if you'd like to look more into it. bakcou.com/products/adjustable-stem?_pos=1&_psq=stem&_ss=e&_v=1.0
I just purchased a new bike and I’m having wrist pain. I have been researching adjustable stem but the stem diameter on my bike is 31.8 mm and everything I’ve found is for 28.6 mm stem.
Absolutely. We can work on that. In the meantime, go to 8:55 in this video that talks about the Scout air pressure which is the same air pressure that you can use for your storm. ua-cam.com/video/wfid6H9sjuE/v-deo.html
Great vid, I am just about to purchase my first true mountain bike. I am new to the sport, so my knowledge is little. I want to ride with my back as straight as possible, so happy I found your channel. I am 58 and some back issues, my riding will mostly be casual and little impact, but I love the look and style of a mountain bike. Will this stem fit any brand of mountain bike? My budget is about 300 to 400 bucks, so is there a brand of bike you can recommend? I know I want disc brakes front and rear, any info will be greatly appreciated.
This stem will fit most standard but we can also give you the measurements if needed. If whatever bike you get doesn't have an adjustable stem, there are lots of different sizes of stems you could get that should fit your bike if ours don't. Congratulations on wanting to buy a mountain bike! they are fun and a great way to exercise.
@@bakcou Will be purchasing my bike from DICK'S Sporting Goods. It is the GT AGGRESSOR 21 Speed, Medium Frame. It has all the features I am looking for, for only $399.99 ,the handle bar stem is a standard design, and will accept the adjustable Stem.
I've got an adjustable stem on my bike. It makes the rice a lot more comfortable but it makes a lot of cracking and creaking noises from it while riding. What could be the problem?
I am considering installing an adjustable stem. But a question first My bike has a twist throttle. Can the stock almost straight handle bar be removed and replaced on a new higher handle bar?
It may be able to if your electrical cables that hold your wiring are long enough. We would think that it would be ok but definitely measure first before you buy some new handlebars
My opinion is it depends on how aggressive a rider you are and what terrain you are riding (not referring specifically to the bike in this video; making a generalization). If I was doing sizable jumps and fast chunky black diamond technical rides I'd be reluctant to use because an adjustable stem adds a risk factor imho. I'm not a very aggressive MTB'er so I feel sort of ok with a high quality adjustable installed properly to the torque spec and checked regularly. Note that some bike/stem combos, adjustable or not, will not have enough slack in the cables for the longer part and will need to be redone. Before going to an adjustable stem I would always first look for a non-adjustable stem that met the desired geometry and only go to the adjustable because it's the only choice. Some people may want to play around with different angles and the adjustable does offer that feature. However, what ever adjustable you pick leaves you stuck with your chosen stem length and note that playing around with the geometry can affect steering leverage/feel in a good or bad way (though minor changes to casual riders aren't likely to make a big difference). When in doubt I would consult a knowledgeable friend or bike shop.
I watched this video and istalled my handlebar adjuster in less than an hour. Easy peasy!! I actually added an adjustable and a straight. Thank you so much!! Now I sit up straighter, with much less pressure on my wrists.
Awesome! We love to hear it! So happy that we could help and explain it easily.
Nice view of the two options. I especially like that you are tall (I'm 6'5") as few reviewers talk about these options for taller guys. Also, I especially appreciate that you used the exact same bike side by side with only the stem change different. Too many reviewers don't have side by side, but end-to-end comparisons and it's hard to tell the real differences. Well done.
I like the upright posture better for two reasons - my back and my neck. As a taller rider, I find lower bars make me hunch over and my back gets sore after about 30 minutes. As a result of being hunched over, I now have to hyper-extend my neck so my face if forward. That puts strain on my neck. So altogether, an upright posture is better for me since I'm not doing mountain trails, speeding down a race track or stuff a 20 yo would do. Thanks again for the review.
Happy to help! And thanks for all the positive notes. We will make sure to do side by side comparisons like this more often with other bike products we have. Was there anything else you'd like to know about this?
I'm 5'10 and just diagnosed with cervical spondylosis. I don't want to give up biking. Hoping this will help!!
Thanks for this Video. I installed mine and was frustrated at first because I couldn't get the head tightened up enough and had a lot of slop in the head making my fork set super sloppy. After messing around a lot I was bale to get the stem tightened down enough to stop the loose head. The stem extension is the only way to go for improved rider position if you have a bad back. More up right and makes my riding position much more enjoyable.
Glad I could help! And we agree! If you want a more comfortable position than this is THE WAY to go!
My wife and I are vertically challenged, and we both found help this way. Handlebars that swept back were dismissed as destroying the balance and feel for the front wheel. Very easy installation on our Lectric XP 2.0
Thank you for sharing! :) we are glad this helped you
Vertically challenged? Really? These posh b/astards are some majestic masterpieces
I just put this on my BAKCOU Mule makes my ride more comfortable after my surgery on my rotator cuff
My hands don’t go numb now glad I did it
Thanks for sharing that!
I just bought a 49 North adjustable stem. I needed to raise the handlebars on my commuter bike after back surgery. It works great. Be careful to tighten the pivot screw properly that levers the forward arm. It takes 12-13 newton meters of torque (108 - 117 inch pounds of torque)! You probably should use a torque wrench. Those e-bikes are nice, but they're never going to be "aero" machines no matter what you do.
Thank you! Hoping this might stop my shoulder pain
Let us know if it does. We think it will since you won't be stretching so far for the handlebars
@@bakcou thank you 😁😁
They work great. I mean the Ritchie ones that fix in 4 points.
Hi !!! finally i fund a video showing how are the differences between this kind stem's on the real world
The best example riding both models
Thank you.
Happy to help! Thank you so much for commenting
Since I put on my satori adjustable stem, I sit upright which gives a more comfortable seating position and I don’t slide towards the front of the seat like before. Also the leg drive is more isolated in that position since that forward leaning weight isn’t there to help your pedaling. Much better than that flat stock stem that was installed on my Aventon Level 2.
Happy to hear that!
Never realised how versatile the adjustable stem is. Just brought a $7 stem extension which I regret now.
It's definitely worth it. Here is the link to ours if you'd like to look more into it. bakcou.com/products/adjustable-stem?_pos=1&_psq=stem&_ss=e&_v=1.0
very helpful thanks, i'ma gonna get that for my back.... btw insanely cool background for you video!
Thanks Tim! Let us know if you need some help with it.
Love my storm. Wish they would make a platform to haul your tree stand tho.
How big is your stand and how much does it weigh?
Can you make a video on the proper way to true or tighten the front and rear spokes? That would be great.
Yes. Absolutely we can!
excellent explanation. Awesome video. Thanks
Thanks for watching!
Excellent video, very scientifically explained. Thank U.
Thank you
I just purchased a new bike and I’m having wrist pain. I have been researching adjustable stem but the stem diameter on my bike is 31.8 mm and everything I’ve found is for 28.6 mm stem.
if you installed the stem towards you, you would be even more vertical. But makes your body able to catch more wind resistance.
I was wondering if that was an option.
I would also like a video explining the front fork adjustment... and what the heck is the left fork AIR thing all about???
Absolutely. We can work on that. In the meantime, go to 8:55 in this video that talks about the Scout air pressure which is the same air pressure that you can use for your storm. ua-cam.com/video/wfid6H9sjuE/v-deo.html
@@bakcou perfect! Thabks
My adjustable stem is straight up to most comfortable position.
It really does make for a comfortable ride.
Hmm from the vid I don't see any downside for using an adjustable stem. If you want aerodynamic you can even lower it more than the stock flat stem?
I have long legs short torso and am
Sick of hunching forward with so much pressure on arms causing neck tension and rounded back.
Think I need this
This would definitely help with that
I bought a stem for my bike without thinking of the handle bar thickness, how can I fill in the gap so it’s solid?
Thank you for the vid, I am a cyclist I will stay with the original.
Glad we could help! Yeah if you're a road cyclist you'll definitely want a more aggressive stance without and higher handlebar stem.
Outstanding!
Great vid, I am just about to purchase my first true mountain bike. I am new to the sport, so my knowledge is little. I want to ride with my back as straight as possible, so happy I found your channel. I am 58 and some back issues, my riding will mostly be casual and little impact, but I love the look and style of a mountain bike. Will this stem fit any brand of mountain bike? My budget is about 300 to 400 bucks, so is there a brand of bike you can recommend? I know I want disc brakes front and rear, any info will be greatly appreciated.
This stem will fit most standard but we can also give you the measurements if needed. If whatever bike you get doesn't have an adjustable stem, there are lots of different sizes of stems you could get that should fit your bike if ours don't. Congratulations on wanting to buy a mountain bike! they are fun and a great way to exercise.
@@bakcou Will be purchasing my bike from DICK'S Sporting Goods. It is the GT AGGRESSOR 21 Speed, Medium Frame. It has all the features I am looking for, for only $399.99 ,the handle bar stem is a standard design, and will accept the adjustable Stem.
@@edwarddillon6016 Yeah that should be fine! Enjoy riding!!
I've got an adjustable stem on my bike. It makes the rice a lot more comfortable but it makes a lot of cracking and creaking noises from it while riding. What could be the problem?
It's possible that it wasn't tightened all the way before tightening the clamps. I'm sure you've tried that but if not that could be a start.
So you can't take cuves fast with the adjustable? You can't go fast? How much slower will you go from wind drag? .2 mph slower?
No you absolutely can, it is just a little more of an aggressive leaning over stance with your normal stem the bikes come with.
What about pre-angled stems and stems with different lengths?
You could attach those if they have the same mounting.
Man, you don't feel cold!?😅
I am considering installing an adjustable stem. But a question first
My bike has a twist throttle. Can the stock almost straight handle bar be removed and replaced on a new higher handle bar?
It may be able to if your electrical cables that hold your wiring are long enough. We would think that it would be ok but definitely measure first before you buy some new handlebars
thank you very much for an explanation.
Can i use quick release so that i can adjust the height whenever I'm on a mid run or depending on the situation.?
This stem does not have a quick release function. You would have to stop and adjust with the tools.
I want to get one of these but my local bike shop said Id have to adjust all the brake and gear cables. I found this hard to believe. Is it true?
No you don't have to.
Would the adjustable stem move out of position while riding since it's not a fixed stem?
Not if you tighten it properly and then during a pre ride check make sure it is still tight.
Is it safe to use on a mountain ebike?
Yes it is. You can add an adjustable stem to a mountain ebike. That's mostly the type of riding done on our eBikes as well.
My opinion is it depends on how aggressive a rider you are and what terrain you are riding (not referring specifically to the bike in this video; making a generalization). If I was doing sizable jumps and fast chunky black diamond technical rides I'd be reluctant to use because an adjustable stem adds a risk factor imho. I'm not a very aggressive MTB'er so I feel sort of ok with a high quality adjustable installed properly to the torque spec and checked regularly. Note that some bike/stem combos, adjustable or not, will not have enough slack in the cables for the longer part and will need to be redone. Before going to an adjustable stem I would always first look for a non-adjustable stem that met the desired geometry and only go to the adjustable because it's the only choice. Some people may want to play around with different angles and the adjustable does offer that feature. However, what ever adjustable you pick leaves you stuck with your chosen stem length and note that playing around with the geometry can affect steering leverage/feel in a good or bad way (though minor changes to casual riders aren't likely to make a big difference). When in doubt I would consult a knowledgeable friend or bike shop.
Is this stem only for e bikes
No it can work on any type of mountain bike
@@bakcou thank you brother I appreciate it
Jis tell me can i use adjustable stem on My MTB
Yes you can. Just gotta take off your standard stem and put an adjustable stem on.
@@bakcou hello if you see this want to ask you something pertaining to a stem riser
@@Blu-Man What's your question