Not only is this channel very entertaining, it's engaging. I've learned quite a bit about how to install, remove and adjust my parts without damaging anything. Much love guys. You really are the best of what the community has to offer.
Oh wow I just realized this video is only 8hrs old. I’ve been watching FD2 videos all day and most are pretty old now. Love the car dude! The video was also nice and relaxing to watch. Keep up the good work!
Props to you guys for aligning the "H" emblem center cap with the valve stem. All Hondas come like that from factory and most people seem to mess it up when putting center caps back on. Good attention to detail by you guys!
@@ahcgarage I hope you guys can also help me to buy my dream car for my upcoming birthday this coming Dec 30,2021 I have money to save so it won't be enough to buy my dream car because I'm still short of 280,000 Thousand Pesos. (5,561 US Dollar) to buy my dream car even it's stock honda civic fd. but it's ok because I'm turning 21, I want this birthday of mine to be memorable so that you can also be part of my dream car so I hope and begging you guys please to help me 😥🇵🇭🇵🇭🇵🇭🙏🏻🙏🏻🙏🏻
Red dots lined up with the valve stems....yes! The FD2 is one of my fav of the CTRs but I don't like how you have to take apart the cowl to work on the car on those 8th gens. Awesome stuff as always AHCG!
I don’t even have car yet, but your video is so satisfying and relaxing! ❤ I intent to buy civic fd (not r 😂) as my 1st car and mod it like the fd2r mugen, huhu 😊
Love the content, fd2 has always been my dream type r. How did this one get into the States since it's not 25 years old yet? Is it fully registered and can be driven on the road legally? I know it's a long shot but I'm looking into importing one of these, any help would be appreciated. Thank you in advance.
Personally I believe the WeatherTech Rain Visors are better looking as compared to Honda or Mugen kits. This is largely because they fit into the window glass channel, as opposed to attaching to the outer window frame via 3M Tape.
From what I gathered several cars can bypass the 25 year rule! And that’s if that car exist here in the states fd2 being the same as any other 8th gen body wise it bypasses the rule. I could be wrong though. And in addition I know the CM cylinder got a revision and the updated version fixed the block out.
the EM1 CMC was a huge mistake imo, we will see how it will hold up but the CMC rod is a completely different length than the FA chassis and will start to develop a click every time you press in the clutch. Shoulda have stuck with a new FD2 CMC or an EM2 as people suggest but never EM1, it will click.
Over a decade on this platform I can guarantee that the Em1 CMC isn't the "fix" for that high rpm lockout. To fix the lockout you have to adjust the clutch pedal correctly from inside the cabin, my 2010 fa5 has zero lock out, new fluids and its set. The delay valve on the stock CMC is needed for these cars and reduces synchronizer wear on the transmission.
Great video. My FD2 just has the squeaking noise while I push down the clutch, I have lubricated the clutch spring and not help. So should I replace/repair this clutch cylinder? Any comments? Many thanks
That's all depends where the noise is coming from. If you have isolate the noise and and it's coming from the pedal, look into the master cylinder. We have also seen clutch pressure plate and un-lube release bearing can make squeaking sounds as well
Its like you guys knew I was about to need to do this work... My Clutch Master cylinder failing, So i bought the EM1 upgrade. Did you use the new flexible line that came with it? Or did you use the original pipework and it fit fine?
19:07 That paint seems to be contaminated. It will be a lot better after atleast having the iron removed, and being clay barred, washed...and spray waxed.
you can import just about anything... question is can you get it registered and insured.. answer is probably not... its for car collector purposes not driver vehicle.
Honda America screw us by not offering these @ limited production here in the states. I like the Factory over the Mugen Visor....More classy Oem feel. Part# for Shift boot n knob?
Hello! I love your work and how you edit your videos and explain all the small details. I have 8th gen Type-R FN2 (EUDM) with a K20Z4 (201 hp) and i wanna do the clutch master cylinder upgrade. Can you please share the EM1 OEM part number? Thank you and keep up the good work!
Thanks very much for watching. That's a great collection you got. We have the part number in the description but here you go: Clutch Master Cylinder 46920-S04-A01
For AHC Garage Apparels and Merchandises:
acurahondaclassic.com
wow a real FD2 Type-R and in mint condition, incredible
It’s super awesome to see these incredible vehicle in the states
How is it legal to drive in the US
@@subaruej2079 apparently Florida is easy to get cars registered. They probably said its an Si haha
@@JasonMcMullen that’s crazy
@@subaruej2079 I know man, its a dream to own a real FD2
Not only is this channel very entertaining, it's engaging. I've learned quite a bit about how to install, remove and adjust my parts without damaging anything. Much love guys. You really are the best of what the community has to offer.
Well said. I learn something every time.
Thanks so much guys. You guys are the reason we continue with our work!!
I could watch these guys rebuild hondas all day . Great work love the channel 👍👍👍👍👍
Thanks for the support. Much appreciate it
What a clean ride. Best civic of all time. Pleasure to drive in this class.
8th gen civic had interior ahead of time
Oh wow I just realized this video is only 8hrs old. I’ve been watching FD2 videos all day and most are pretty old now. Love the car dude! The video was also nice and relaxing to watch. Keep up the good work!
Thanks for the compliments and watching our channel
Props to you guys for aligning the "H" emblem center cap with the valve stem. All Hondas come like that from factory and most people seem to mess it up when putting center caps back on. Good attention to detail by you guys!
A heat gun helps a lot with softening up the old adhesive for removal!
YES! 8th gen civic content that I been waiting for. 🙏
Thanks for watching!!
It's a real Type R not a SI
It’s a type r not an si
This is my childhood dream car. Now I'm turning 21 this coming dec. 30, 2021 still hoping to have this car. Godbless guys watching From Philippines 🇵🇭
Thanks for tuning in 👍🏼
@@ahcgarage I hope you guys can also help me to buy my dream car for my upcoming birthday this coming Dec 30,2021 I have money to save so it won't be enough to buy my dream car because I'm still short of 280,000 Thousand Pesos. (5,561 US Dollar) to buy my dream car even it's stock honda civic fd. but it's ok because I'm turning 21, I want this birthday of mine to be memorable so that you can also be part of my dream car so I hope and begging you guys please to help me 😥🇵🇭🇵🇭🇵🇭🙏🏻🙏🏻🙏🏻
those tire machines are awesome, definetly saves your back
Yes, they are back saver for sure. Glad you noticed
I was about to say, damn I'm more impressed by the tire machine!
Love the white paint/wheel combo!
Agreed!!
That's what a type R civic should look like not this new crap they have this is pure sexiness.
Time flies... I can’t believe FD2R is already 15 years and ready for import.
Red dots lined up with the valve stems....yes! The FD2 is one of my fav of the CTRs but I don't like how you have to take apart the cowl to work on the car on those 8th gens. Awesome stuff as always AHCG!
Thanks for your continued support
I would recommend Heat Gun, it softens the 3M Double Sided Tape that’s already applied to the OEM Window Visors.
Thanks for that great suggestion
Love the upgrades! Awesome FD2 Type R!
Love the channel. Great editing.
Thanks so much 🙌🏼
My dream car since i was 18! Definitely getting this!
Right on !!!
i bought mine in 09 imported from japan and worth every penny.
Good for you!!
Great video! But you should have used the RHD version of the CMC. These are the part numbers for the EM2 CMC:
RHD: 46920-S5A-J07
LHD: 46920-S5A-G07
Great job Mike, can't say I'm a fan of those window visors to me they just don't look right but the car looks fantastic 🤗👍 John UK.
Thanks for watching John
Love FD2R! Waiting for them to be legal in Canada.
Let us have these amazing cars already 😄
I don’t even have car yet, but your video is so satisfying and relaxing! ❤
I intent to buy civic fd (not r 😂) as my 1st car and mod it like the fd2r mugen, huhu 😊
love type R.
Car looks great as it is for the 3M tape use a hairdryer or heat gun the glue will be soft and is easy to take it of and windows down.
Thanks for the tip
White on white is 🔥
Yes!!
Old Adhesive, NIGHTMARE!
Agreed, but with some patient, it came out with no issue
FD2 CIVIC TYPE R in the States, NICE.
👍 the best color combo
Yes!!
Great vídeo, another method to remove the double side tape, is a heat gun, usually it is the fastest way 👍🏻
Thanks for the tip
I have a fk8 and love it but the fd2 is one of my favorite type rs.
Good choice!
FD2 type R...Oh my god...my dream car
Yes, us too!
The best set up ever 😍😍😍😍
We love the look too
Very great n beautiful car. The last JDM NA type R. Lucky me owned one😎
Couldn't agree more!
Nice ride a genuine fd2!!! Keep going Mike!!
Thanks very much!!
@@ahcgarage this is one of the best type r that Honda made... of course after the DC2 and DB8
such a clean car and really good work.
Thank you!
Love the content, fd2 has always been my dream type r. How did this one get into the States since it's not 25 years old yet? Is it fully registered and can be driven on the road legally? I know it's a long shot but I'm looking into importing one of these, any help would be appreciated. Thank you in advance.
Personally I believe the WeatherTech Rain Visors are better looking as compared to Honda or Mugen kits. This is largely because they fit into the window glass channel, as opposed to attaching to the outer window frame via 3M Tape.
Thanks for your feedback
2:58
It needs ceramic brake pads, so that it doesn't accumulate a lot of brake dust fast on all that beautiful paint.
Omg all time greatest!!! How did you get this in the USA ? Is it legal already? Man you guys are the 💣!!!!! Awesome vid !!!!
Such an amazing car... would love to have one in my garage.
You and me both!
Spray some WD40 lubricant on the adhesive..let it soak..and try removing it after some minutes..it will come out clean..
For peeling off the adhesive, maybe try plastic razor blades. You can get them from Wurth USA.
Thanks for the suggestion!!
@@ahcgarage happy to help.
How are they keeping it that clean? Mine's getting dirty the second I stop washing it!
I love hondas i have a 2004 honda civic si Blue color and i try to buy an type R some day
👍🏼👍🏼👍🏼
it’s an amazing machine
Agreed!!
Yes indeed
From what I gathered several cars can bypass the 25 year rule! And that’s if that car exist here in the states fd2 being the same as any other 8th gen body wise it bypasses the rule. I could be wrong though. And in addition I know the CM cylinder got a revision and the updated version fixed the block out.
Wished the current civic type r looked as classy as this instead of looking like something from Gundam
@Louis Louis who else would I be speaking for ?
Wicked ride!
That SEM paint works
Agreed!!
the EM1 CMC was a huge mistake imo, we will see how it will hold up but the CMC rod is a completely different length than the FA chassis and will start to develop a click every time you press in the clutch. Shoulda have stuck with a new FD2 CMC or an EM2 as people suggest but never EM1, it will click.
Over a decade on this platform I can guarantee that the Em1 CMC isn't the "fix" for that high rpm lockout. To fix the lockout you have to adjust the clutch pedal correctly from inside the cabin, my 2010 fa5 has zero lock out, new fluids and its set. The delay valve on the stock CMC is needed for these cars and reduces synchronizer wear on the transmission.
I 100% agree on the EM2 CMC. Save your trans while you still can!
Should've got the Eman(k20z3allmotorftw) - Oem Clutch Master with deleted damper. The Em1 clutch master is terrible.
8:09
I changed my HX's brake m.c. a week ago, 6 months ago I changed the clutch m.c.
Great video. My FD2 just has the squeaking noise while I push down the clutch, I have lubricated the clutch spring and not help. So should I replace/repair this clutch cylinder? Any comments? Many thanks
That's all depends where the noise is coming from. If you have isolate the noise and and it's coming from the pedal, look into the master cylinder. We have also seen clutch pressure plate and un-lube release bearing can make squeaking sounds as well
Beautiful car 😍
@AHC Garage, please ask that owner of the FD2 how he got it imported to USA!!! We're dying to know!!
@@battosaijenkins946 will do!!
Clean af!
Nice, how difficult you think is maintaining those wheels?
Its like you guys knew I was about to need to do this work... My Clutch Master cylinder failing, So i bought the EM1 upgrade.
Did you use the new flexible line that came with it? Or did you use the original pipework and it fit fine?
love to watch your video every skilful entertainment and infor technical
Thanks very much for the support!!
cars mint af
Hi, Love the video!!! quick question, do you know if the FD2 clutch can be interchangeable with the USDM 8th gen Si / Acura CSX type S?
Yes!!
such a pretty car 🥰
Spray with WD40 it helps with those aggressive adhesives.
A GEM!
Plenty of FD2R in Singapore and Malaysia. 🤣🤣🤣
In America it’s different there’s a limit I think its about 1000 type R
Still hyped when spotted one tho 😅
@@laykhampane2056 in malaysia we got 400units only
@@laykhampane2056 so are there fd2r in the us ?
@@reinaldonavarro3800 yes we do
looking fresh :D Love the fd2 but i hate that there is no room in the engine bay xD
With the cowl removed, it changes everything. Thanks for watching
Beautiful car, looking at buying over in the UK, it's just been imported, anything I should look out for? Great video by the way
They are overall great car. Check on rust on the undercarriage and the manual transmission operations
@@ahcgarage will do, appreciate your response.
Very nice .. super celan type r
Mugen mos def !
every 8th gen civic guys dream
Super clean!!! Love it! Subscribed
Another great video. Awesome car! I prefer the Honda visors over the Magen. Is the type R legal to register in your state?
It’s not our car but we know it’s fully registered. Thanks for watching
arghhh dreamcar
What is part number for master cylinder ???? Keep up the great work!!!!
Part number will be update on the description very soon
Em1 cmc is a bad idea em2 for the win
It’s a shame we never got these for US market.
Facts!!
19:07
That paint seems to be contaminated. It will be a lot better after atleast having the iron removed, and being clay barred, washed...and spray waxed.
How did you get that FD2 in the US
I love that generation Civic. Unfortunately the coupe has a different rear.
I didn’t make a type r coupe
Amazing channel. Can you see if you can refresh a Prelude?
It’s on our to-do list. Love the Preludes
how the heck do you keep those headlights pristine after all these years?
Great content! Any update on the part number for the clutch master cylinder?
Question. If purchasing a car from Pembroke pines acura. Do you offer customization work
Wish I could see one in the U.S and would love to own one
How did you manage to get over to the states this early? They will soon be available in canada
It’s our client’s vehicle. So glad to be able to put our hands on it
The million dollar question lol
you can import just about anything... question is can you get it registered and insured.. answer is probably not... its for car collector purposes not driver vehicle.
type R? but the tail lights are circular? This inspired build? The Type R JDM has octagon tail lights
What is the part number for clutch master cylinder? Thanks
Do an em2 cmc not em1
Nice car!
It sure is!
How do you guys even have this FD2 in the US? It’s not 25 yrs old. Unless it came into Canada first?
You need to use a heat gun or interior steamer to remove the double sided tape.
Thanks for the suggestion
Hi is it possible to put tire 205 wide for this rim? Thank you
Honda America screw us by not offering these @ limited production here in the states.
I like the Factory over the Mugen Visor....More classy Oem feel.
Part# for Shift boot n knob?
Hello! I love your work and how you edit your videos and explain all the small details. I have 8th gen Type-R FN2 (EUDM) with a K20Z4 (201 hp) and i wanna do the clutch master cylinder upgrade. Can you please share the EM1 OEM part number? Thank you and keep up the good work!
Thanks very much for watching. That's a great collection you got. We have the part number in the description but here you go: Clutch Master Cylinder 46920-S04-A01
@@ahcgarage sorry, my bad... didn't thought that you guys will share it. Thank u!
maybe some steam and a micro fiber towel for the tape... ammo nyc i believe does this on some of his work
Does the 25 year import rule no longer apply in the States?
Anything goes in Florida
WD 40 can remove two side tape
WD-40 to get the adhesive off the doors from the visors
Thanks for the tip!!
I seen Goonzquad using some type of wheel like rubber..rubber wheel for a drill.
How much the original mugen door visor ?
Where can I purchase the clutch master cylinder?