BMS connections Rs 485 pylon tech up 5000 lithium battery error 61 code. error 69 code

cut the battery side cable and re-crimped in new connector
brown on 3
brown white on 5
green on 8
if you make new cable
3 of inverter side put on 8 (Rs485 B)
5 of inverter side put on 7 (Rs485 A)
8 of inverter side put on 6
kindly check continuity of the connectors with the help of cat 6 ping tester or with the help of tong taster through buzzer .
61 ERROR Communication lost (only available when the battery type is setting as "Pylontech
Battery" or "WECO Battery" or "Soltaro Battery
*After battery is connected, communication signal is not detected for 3 minutes,
buzzer will beep. After 10 minutes, inverter will stop charging and discharging to
lithium battery.
*Communication lost occurs after the inverter and battery is connected successfully,
buzzer beeps immediately.
69 Code
If battery status is not allowed to charge after the communication between the inverter and battery is successful, it will show code 69

[@omairzz]

Thanks. Communication successful.

[@Service-u9k]

Good video

[@zssolarengineering]

Mashallah

[@anaskarim787]

Bhai agr single battery ka BMS k sath connection karna ho tu os my dip switch k bary my bata dy dip switch ko kes tarha rakhy?

[@electricalpowerengineering9332]

How to connect other brand's lithium batteries like pylontech battery?

[@NKM.Official]

Alsalam Walaikum
Brother how can connect BMS connection Single lithium ion 48v 100Ah battery with Tesla VM3 5kw

[@itsdawar1]

Walikumas salam same way to connect make a cable connect on rs 485 on battery and connect on inverter

[@NKM.Official]

@@itsdawar1
I had connect as you said but still 61 error.
I have Big Chief Lithium Battery 🔋 lifepo4-48V100AH

[@itsdawar1]

Kindly check cable. Its required custom made cable

[@itsdawar1]

I never install big chief

[@zssolarengineering]

Needed cable