Thank you for letting us know you had to make this joint several times before perfecting it. That is the encouragement I need knowing it is a process and not instant.
I’ve done a few of those joints. I learnt layout is far far far and away the most important aspect of the joint. I divided the cross section of the square stock into /8’s, and made a reference block that I could use to accurate set each increment of the marking gauge. That way you are not constantly measuring. Next tip is the use of a router plane again using the reference block I used for the marking gauge. I roughly cut each joint to the lines and then used the router plane to bring each component surface to its correct dimension. The mortises I cut to the gauge lines. It’s a very rewarding joint to cut, be prepared for a few head scratching moments for your first few attempts. Great job there fella, it was good to see your first joint wasn’t perfect but that’s what practice is for.
I’ve been studying Chinese furniture and the joints used. Excellent building and explanations in the 3 corners, your one of my all time favorite you tube channels. Thanks Corey Collins
Man, that is a sexy joint! It looks pretty complicated and to me, it's more complicated to understand exactly what's going on because I'm used to the metric measurement system and English isn't my first language. What's funny though, is that when I go out to buy tools or other things I've learned/heard about in your videos, I have no idea what the names are for them in Dutch, so I have to ask for them in English! lol Anyway, great video! It is definitely going into my private playlist of things I'll have to try someday! Thank you!
Not sure how I havent found your channel before now, but found you from Jay's giveaway. I've binged a ton of your videos and really appreciate your style.
That’s an amazing joint. This series of videos you’re creating is outstanding. They will be excellent resources for people like me when we need to make one of these joints in the future.
That is crazy! I'm looking for a three way joint in a single plane. (think runners for a three legged table that meet in the middle). Would love to see a joint of the week on that! =)
All I could think about with this is if you were to make a Japanese style end table using that joint to connect the legs and the top portion. Maybe cutting a dado to make a wooden panel sit on the inside of the joints.
That's an impressive joint! Awesome work. Also, you might want to scrape off some of the dried glue from your apron if you're going to have so many close ups. Yes, I know it's glue, but I kept thinking of an old used snot rag lol.
Is this a strong joint? Could you scale this up to 4" thick square hardwood stock and use this, for example, in a heavy-duty dining table (300+ lb load)?
To those of you who gave this a thumbs down, I'd love to give you all one helluva slap upside your heads! And I'm sure the rest of us would love for you make a video making these joints.
Hi! Great job!!! You said at the beginning of the video that this was the hardest joint you ever made. What about japanese sunrise joint? Have you ever tried it? If no, how about a tutorial?:)
Enjoyed watching you make that joint, also like your marking gauge, what's the name? And lastly I like your small work table, I have old eyes and my back doesn't like to bend over while cutting joints. Great Job.
Since there's only so much that can be shown on video, do you have plans or an article that is more indepth? Or where did you find plans? Thanks. Really awesome video.
Thank you for the video, I’ve been wanting to make one ever since I saw the joint in “Domestic Chinese Furniture “ by Gustav Ecke. It’s a great book. You can find it on Amazon.
Nicely done! But this is traditional Chinese joinery, like the other so called "Japanese joinery". You may not care about that, but they were invented a couple thousand years ago. Chinese still using these joinery now. Japanese copied them exactly like they copying other Chinese culture as their own.
![Traditional 3-WAY Miter Wood Joint [삼방연귀]](/img/n.gif)
Thank you for letting us know you had to make this joint several times before perfecting it. That is the encouragement I need knowing it is a process and not instant.
My head hurts just looking at the 3 sample joints. Nice work.
That stuff is beyond amazing. I'm not born with that kind of patience.
The way Japanese joinery and even sewing evolved because of constant floods and water damage is amazing. Awesome work
Thanks bud!
Video with a beautiful image and sound quality. All that's missing is multi-language subtitles so that your videos can travel the world.
Thank you
I’m glad you did this. That’s crazy. It’s like a puzzle.
I’ve done a few of those joints.
I learnt layout is far far far and away the most important aspect of the joint.
I divided the cross section of the square stock into /8’s, and made a reference block that I could use to accurate set each increment of the marking gauge.
That way you are not constantly measuring.
Next tip is the use of a router plane again using the reference block I used for the marking gauge.
I roughly cut each joint to the lines and then used the router plane to bring each component surface to its correct dimension.
The mortises I cut to the gauge lines.
It’s a very rewarding joint to cut, be prepared for a few head scratching moments for your first few attempts.
Great job there fella, it was good to see your first joint wasn’t perfect but that’s what practice is for.
Great joint Jonathan. I have always like this joint, and I think I will try making it now.
I’ve been studying Chinese furniture and the joints used. Excellent building and explanations in the 3 corners, your one of my all time favorite you tube channels. Thanks Corey Collins
Impressive. Simply impressive. ... Wonderful tutorial!!
I can’t imagine making 4 of those joints to make a rectangle. Wow!
Hahaha you would have to do 8!
Great job Jonathan....
WOW!!! This is an AWESOME joint! Great Job!
Beautiful work man! Very helpfull video for such a complex joint. Excellent tips and pointers from a pro BELLA! 👍👍
Awesome joint and great instruction, Thumbs up my friend.
thats hauntingly beautiful
Thanks you so much!
Awesome joint! Makes my head hurt thinking about trying it. LOL Thanks for sharing!
Wow man. That was awesome! Shout out to Jay Bates for recommending you channel!
Thanks so much bud and welcome!
Man, that is a sexy joint! It looks pretty complicated and to me, it's more complicated to understand exactly what's going on because I'm used to the metric measurement system and English isn't my first language. What's funny though, is that when I go out to buy tools or other things I've learned/heard about in your videos, I have no idea what the names are for them in Dutch, so I have to ask for them in English! lol Anyway, great video! It is definitely going into my private playlist of things I'll have to try someday! Thank you!
very nice
Katz , awesome joinery 👌a visual brain teaser for me 😊
Thanks brother!
I look forward to joint of the week keep up the good work mate
Cheers my friend!
@@katzmosestools i enjoy trying these out over in england and i will be ordering one of your dovetail guides
Neat "trick" with the combination square, I hadn't thought of using those grooves in that way.
Yea that's my favorite! Thanks boss!
YES!!! I've been waiting for this one!! It came out great!! Awesome work Jonathon, keep them coming! ⚒
Thanks bud!
Amazing, love your videos Jonathon, full of information keep them coming!
Thank you so much!
Not sure how I havent found your channel before now, but found you from Jay's giveaway. I've binged a ton of your videos and really appreciate your style.
Thanks so much bud! I really appreciate your kind words!
Awesome...now make it a double three way locking miter.
Then make it a triple!
That’s an amazing joint. This series of videos you’re creating is outstanding. They will be excellent resources for people like me when we need to make one of these joints in the future.
Thanks so much bud!
It's really a crazy one! Fantastic!
Awesome work! 👍🏻👊🏻
Thanks bud!
That is crazy! I'm looking for a three way joint in a single plane. (think runners for a three legged table that meet in the middle). Would love to see a joint of the week on that! =)
Nice joint! I'm impressed by the patience. Anyways. It's called a Ryoba.
Great Job. That's amazing work. Thanks for sharing.
Nice
Great video!
Awesome job breaking the joint down. More videos like this please!! The thumbs down probably use pocket screws 😂
Hahahaha thanks bud!
Wow super cool
Thanks bud!
Amazing job!
COOL JOB!!!
i would love to see you test these joints and see how much pressure they can take before breaking
That took me almost a week of practice. Dont think I'm going to break it but I'd love to see that too
All I could think about with this is if you were to make a Japanese style end table using that joint to connect the legs and the top portion. Maybe cutting a dado to make a wooden panel sit on the inside of the joints.
Great explanation as always
Really appreciate it!
Does this also work at a larger scale? Can I use it to build my pergola this way?
just mind blowing!!
Wow that is a nice job!
Thanks bud!
If you really want to mess with peoples' heads, cut little rectangular inlays on the pieces that don't have true through mortise and tenons.
That's an impressive joint! Awesome work.
Also, you might want to scrape off some of the dried glue from your apron if you're going to have so many close ups. Yes, I know it's glue, but I kept thinking of an old used snot rag lol.
Hahaha thanks bud
How would you clamp that joint for glue up?
Is this a strong joint? Could you scale this up to 4" thick square hardwood stock and use this, for example, in a heavy-duty dining table (300+ lb load)?
That's bad ass man. But what could you use this joint for? Yep definitely bad ass.
I could see this being great for like, a lightbox or display case.
To those of you who gave this a thumbs down, I'd love to give you all one helluva slap upside your heads! And I'm sure the rest of us would love for you make a video making these joints.
Hahahaha thanks my friend!
Hi! Great job!!! You said at the beginning of the video that this was the hardest joint you ever made. What about japanese sunrise joint? Have you ever tried it? If no, how about a tutorial?:)
I've done a joint of the week on the sunrise. Check it out
Enjoyed watching you make that joint, also like your marking gauge, what's the name? And lastly I like your small work table, I have old eyes and my back doesn't like to bend over while cutting joints. Great Job.
Thanks bud! Check put my moxon vise video
is it a big joint strength sacrifice to fully hide the mortice/tenons?
Since there's only so much that can be shown on video, do you have plans or an article that is more indepth? Or where did you find plans? Thanks. Really awesome video.
The Japanese Joinery book. Thick one with black cover
Thank you. I appreciate it. Really amazing joinery.
Now that's NOT a butt joint!! Looks awesome! Great video!
#huskyboywoodworking
Bahahahaha
Awesome
👍😉
Thank you for the video, I’ve been wanting to make one ever since I saw the joint in “Domestic Chinese Furniture “ by Gustav Ecke. It’s a great book. You can find it on Amazon.
But what about that gap at 14:24?
Great job, I think you would need quiet time in the workshop for these joints, an interruption at the wrong time would have to drive you nuts 👍👍👍
Hahaha yep
Is it any wonder a culture that can dream up a joint like this can screw together a Toyota that is reliable? Details, details, details.
how bout for 2x3 wood for corner like that?
I think it is way easier if it is square
yeah but my wood supply demands it.
Is that citronella candle wax on the shop apron?
Hahaha glue
Very cool. The layout must be hard to get your head around at first
It was haha
When are the the winners of giveaway you did with mike farington gonna be announced
Already drew the winner. If you follow the contest link you'll see who won. Cheers
Katz-Moses Woodworking Shop k thanks
William ng uses a mortiser to do his
My head hurts!
What I got from this video is..... Damn... I suck.
What hole! I didn't see any whole! :)
Hahaha
Awesome joint, nice work...turn off the auto focus on the camera.
👍👍
Make a knuckle joint!
It’s called a butterfly joint n that’s way too much pain, effort n trouble cuz there’s an easier way 🤣🤣🤣🤣🤣
I moved you from 666 thumbs up to 667. Not today Satan.
Bahahahahahahaha OUT YOU DEVIL!
Nicely done! But this is traditional Chinese joinery, like the other so called "Japanese joinery". You may not care about that, but they were invented a couple thousand years ago. Chinese still using these joinery now. Japanese copied them exactly like they copying other Chinese culture as their own.
Great looking joint. Looks inherently weak, though.