LG Washer Tub Drum Assembly Replacement AJQ74873908
Вставка
- Опубліковано 27 сер 2024
- Buy part AJQ74873908 now: repairclinic.c...
This video provides step-by-step repair instructions for replacing the tub drum assembly in an LG washer (Model WM4000HBA). The most common reason for replacing this part is if it's missing or broken.
Learn how to troubleshoot your washer:
www.repairclin...
This replacement video is applicable to the following brands:
LG
Connect With Us!
plus.google.co...
/ repairclinic
/ repairclinic
/ repairclinic
Don't forget to like and comment on this video and subscribe to our channel!
Thank you for providing the best step-by-step instructions that didn't have me miss a beat. Definitely one of the best instructional videos on the tube.
Thank you for providing the best step-by-step instructions
You're welcome!
We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review
We hope that you have a great day!
The top view at 11:00 is all I needed. Thank you!
Ok, it's been taken apart, and it is now 9pm, planning to wake up tommorow to wash the tub out from 15 years of fabric softener, tbh the hoses and stuff cleaned up nicely
Edit: might not be as easy as I assumed, looks like the tub will only come out if the bearing comes with it 😅 might just clean what I can and call it since that's a bit above my level
Edit 2: it is back together and somehow works, thanks for the very informative video, there was so much gunk from years of fabric softener but I can say now after cleaning most of it that it does not smell anymore and the new boot seal and shocks made it look, sound and feel brand new
I HAVE A LEAK IN BACK OF TUB THAT DRUM IS IN. WHAT CAN I DO TO FIX THAT LEAK. I HOPE IT CAN BE EASIER THAN CHANGING THE WHOLE DRUM AND TUB, AS YOU DID IN THE VIDEO
Excellent step by step video.
Great video!!! Excellent I like the step by step 👍
You're welcome!
If you would like to give us a review, here is our link: g.page/r/CcVUrahZNozMEBM/review
Have a great day!
Can you replace the bearings in the drum or is it just a whole drum change , have a growling bearing but unsure is the plastic drum serviceable to replace the 2 bearings
if i need to replace the plastic blades in the drum do i need to do all this ?
Thank you,
Is there a way to get inside the tub cover to remove and replace the baffles/ lifters? They are screwed in and all three have failed. I have the exact unit in the video.
Got exact same issue, looks like we have to take the whole drum out to screw then back again. Absolute shitty design. Hope it will be cover by extended warranty
bet that door seals dear to replace , just silly a bit of "over the top" no need
what can be the reason to need a new drum? i am asking this because our LG front loader started to create holes on older shirts.
@@repairclinic Thank your for prompt response. Your video is very informative. Our problem is, authorized service centers tend to replace entire drum and the gray colored gasket together My intension is to diagnose it first before paying naythign to those opportunist people. If you could tell me that LG drum housings are gerenally glued together or not, that will be appreciated very much.
@@coskuarsiray Depends on your model. The top comes off pretty easy, 2 screws in back slide backwards. I have mine apart to diagnose rattle. Counterweight sheared off the front of the tub. My model is glued together. There are other videos that show the front and back half of the tub are bolted together.
@@tomsteward8925 I had the same issue. Did you replace everything or just the front tub cover?
I am going through the same issue now, lg wants to replace the drum.
Whats the heating element for?
Hi may I ask is the vm45000 LG washer are you able to open the outer tub split into half??? I would like to know if they using rubber seal or glue between the rear and front for the outer tub... incase in future i may replace the bearing, thank you sir
What year is that model? I have seen model made from 2022 and above they are glued. If you need to replace the bearing you will have to replace the whole drum,tub and bearing- they made them non serviceable. To verify you can open your washer’s top lid and if you don’t see any bolts on the tub you’re screwed.
Where did you order this part from?
You can find genuine OEM replacement parts at RepairClinic.com by entering in your model number.
What is the part you pulling off on 6:34 mark and where can I buy that part
That black piece? It's the Connector Nozzle. You can buy them from various online sellers.
Wow
You're welcome!
We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review
We hope that you have a great day!
For the white plastic bolts of the shocks just use a lighter to heat it for easier extraction
Use thin-nose pliers to depress the tab, the pull pin out using a large pair of 45° angle thin-nose pliers. I also used a large pair of Knipex like 87 01 400 or equivalent to press out the pin using the closing action of the jaws - one tip on tip of the pin the other on the bracket then squeeze. Worked great on the pins where there was enough room.
Ok
What is the reason for replacement? Too many dings from shoes on high spin? It's something that dumb people tend to do....
Number 1
.
.
.
.111
😊
❤