Good video once again bro , I run BCP ceramic pads with BCP sloted discs all round on my 08 SP23 hatch. Was always taught not to cheap out on brakes or tires.
Great video as always, been running stock pads and calipers for the last seven years, would love to get an aftermarket set that can fit the stock 18 inch wheel.
Also one thing I love and I've noticed about Mazda 3 brakes is that they last so damn long. Rotors and pads. I bought my front brakes like 3 years ago and they're still like I wanna say 10mm thick. And rear is roughly the same. And sometimes I'm hard on the brakes. I mean hella hard when ever I do pulls and I'm coming up on on-coming traffic. Stock Mazda 3 brakes ain't bad. One day I might do bigger brakes, though it doesn't make serious power so I feel it's not necessary and the stick ones are fine with premium pads and rotors
@ColtonRichter yeah that's true. That's why I got the more expensive rotors on mine. They now warped after 3 years but luckily it's not that bad. You really only notice it when your slowing down from a higher rate of speed.
Great video ❤ I think you should get some custom HEL Performance braided brake lines on that Mazda 3 next. I did for my 323 and highly recommend it. I normally rotor swap after 2yrs with 1 regrind at first pad swap. I'll be using EBC street performance rotors and EBC Green Stuff brake pads as my car is showing signs of shake when braking too. A slight chamber adjustment might also take place.
I was about to watch a montages of 5.9 cummins start ups and then I seen you didn't change your pads/rotors in 8 years n I'm like wtf, click. Or I guess tap since I tapped it on my phone and linked it to my TV
Good video once again bro , I run BCP ceramic pads with BCP sloted discs all round on my 08 SP23 hatch. Was always taught not to cheap out on brakes or tires.
Nice! I think i'll go with EBC for the upgrade
Great video as always, been running stock pads and calipers for the last seven years, would love to get an aftermarket set that can fit the stock 18 inch wheel.
I love the MazdaSpeed 3 upgrade, I couldn't imagine how much more bit the BBK would add
Also one thing I love and I've noticed about Mazda 3 brakes is that they last so damn long. Rotors and pads. I bought my front brakes like 3 years ago and they're still like I wanna say 10mm thick. And rear is roughly the same. And sometimes I'm hard on the brakes. I mean hella hard when ever I do pulls and I'm coming up on on-coming traffic. Stock Mazda 3 brakes ain't bad. One day I might do bigger brakes, though it doesn't make serious power so I feel it's not necessary and the stick ones are fine with premium pads and rotors
I'm opposite on rotors, these babies cook up so bad and warp way too easily. Pads do last a long time tohught!
@ColtonRichter yeah that's true. That's why I got the more expensive rotors on mine. They now warped after 3 years but luckily it's not that bad. You really only notice it when your slowing down from a higher rate of speed.
For the brake rotors is there any adhesive put on them to keep them in place or do you just slide them on then put the calipers back on
Use brake lubricant and slide them in place on the bracket
Im on 190k miles original brakes on my mazda3
That's nuts 😮💨
Great content, you should never cheap out on brakes or tires 😊
You know me, cheapest tires on the block
Great video ❤ I think you should get some custom HEL Performance braided brake lines on that Mazda 3 next. I did for my 323 and highly recommend it. I normally rotor swap after 2yrs with 1 regrind at first pad swap. I'll be using EBC street performance rotors and EBC Green Stuff brake pads as my car is showing signs of shake when braking too. A slight chamber adjustment might also take place.
I'll be using EBC pads for whatever lands in my lap next!
Next: Brembo Caliper 🔥
🔥
I was about to watch a montages of 5.9 cummins start ups and then I seen you didn't change your pads/rotors in 8 years n I'm like wtf, click. Or I guess tap since I tapped it on my phone and linked it to my TV
😭😭😭
@@ColtonRichter Wait I hope you know when I said click, I clicked on your video and not the diesels first