Door Bell Rings automatically on its own ? Fix it easily || Ghanti Apne aap kyu bajti hai ?
Вставка
- Опубліковано 15 січ 2022
- #diy #cheap #perfect #doorbell #repair #electronic #youtube #techtips #trending #newvideo #subscribe #like #share
Circuit Diagram - drive.google.com/file/d/1o5Yc...
Ghanti light aane par Apne aap kyu bajti hai ? ise kaise thhek kare ?
Greetings to everyone!
सभी को नमस्कार!
This video is about a musical door bell that rings automatically on its own. The purpose of this video is to show the reason behind this issue. This video also shows an easy way of solving this problem with the help of an electronic relay.
यह वीडियो एक घंटी के बारे में है जो अपने आप बजती है। इस वीडियो का उद्देश्य इस समस्या के पीछे का कारण बताना है। यह वीडियो इलेक्ट्रॉनिक रिले की मदद से इस समस्या को हल करने का एक आसान तरीका भी दिखाता है।
Thanks For Watching. Stay tuned and consider subscribing.
देखने के लिए धन्यवाद। मेरे साथ बने रहें और सदस्यता लेने पर विचार करें। - Наука та технологія
Bhai mere sath bhi aisa hua hai wirring me induction ki wajah se voltage induce ho raha tha bell automatic to nahi lekin ek baar switch press karake wapas chhodne par bajati hi rahati thi agar bell switch ka indicator disconnect kare to sahi kam karati thi. Maine bahut try kiya lekin problem solve nahi huyi isiliye problem solve karane ke liye muze bell switch ka indicator disconnect karana pada.....aapne jo solution bataya wo bhi sahi laga....
Thankyou very much dear. Your appreciation means a lot to small creators like me. Good wishes to you.
issse achha hai ki 2 saal baad 100 rs ka naya le lo bhai ji ! vese mind blowing job
Thanks for watching dear viewer. By the way, this type of problem can occur in new electronic bell as well. This is caused due to external conditions such as environmental moisture and rain. A new bell can not do anything in that case.
Bhai bell apne aap roj shaam ko bajne lagti hai phir subah apne aap band ho jati hai what could be the reason?
This could be due to moisture in the switch, that dries up due to sun in the morning. So, the bell stops ringing in the morning. Thus, I'll suggest changing the bell switch.
Thankyou very much for commenting. Hope this helps.
Bro jab cooler ya fridge ya submersible on karte hain toh apne aap bajne lagti hai Original sound se thoda kam sound par
Leakage current ka issue hai. Relay se theek ho jaaega. use relay.
Ye lagane ke bad kya bell electricity jane par bhi kaam karegi jaise pehle karti thi
If you have Inverter backup, then it will definitely work. But it will not work without power supply.
Thankyou very much for commenting and Sorry for late reply.
Brother. Raat k time bell hud bajhti ha ir dinn ko kuch nai hota. Is ka kia hal ha?
Iska reason raat me padne waali oss ho sakti hai. The method in this video will resolve your issue.
Same issue even after changing bell
The bell is making tuk tuk sound
अपने वीडियो का पूरा सर्किट डायग्राम भी शेयर करे
Thanks for watching dear viewer. I've attached the circuit diagram below.
drive.google.com/file/d/1o5YcqL_YZjQ1w2QhrcrXtcTzIzMs-3KR/view?usp=share_link
Bhai mere door bell ekdm naya or original tha..2 mahine thik chala fir ek din achanak se bajne lga aur ruk hi nhi rha tha..kuch bhi krne pe..phr maine main light kaat ke usko terminal se alag kiya tb jaa ke wo shant huwa..kya uski jagah naya door bell lenge to fir se wahi problem hogi?
Bhaiya kya us samay baarish Hui thi, ya fir Pani jaane ki aur koi probability, jaise bell switch ke paas gaadi dhona, ya plants me paani daalna?
Kyuki aisa to moisture se hi hota hai.
Get your bell switch and writing inspected.
Thanks for watching.
Bina cell waala leena
सर मेरा डोर बेल सेल से चलता है उसे बिजली से नही जोड़ा गया है ।
पर जब भी लाइट आती है वैसे ही बजने लगता है,क्या समस्या हो सकता है
Thanks for watching dear viewer.
यह स्वचालित रिंग समस्या केवल सेल संचालित घंटियों में देखी जाती है। इन घंटियों को चालू करने के लिए बस एक छोटे सिग्नलिंग वोल्टेज की आवश्यकता होती है जो कि लीकेज करंट के रूप में घर की वायरिंग में मौजूद होता है।
यह घंटी के तारों और लाइव तारों के बीच समाई(capacitance) के कारण होता है। जब बिजली आती है, तो यह समाई के कारण घंटी के तारों में एक छोटा वोल्टेज उत्पन्न करती है। इससे घंटी अपने आप बजने लगती है।
रिले(Relay) का उपयोग करके, आप उस छोटे से लीकेज करंट के कारण घंटी की स्वचालित रिंग समस्या से बच सकते हैं। मैंने अपने वीडियो में दिखाया है कि रिले का उपयोग कैसे किया जाता है।
Jab electric ata hay tab ghati bajta kyu..?
This may be caused due to neutral leakage in electricity supply. Check your wiring.
Mera doorbell bijli se nhi chllti hai uska tar tut gaya hai fir v bajne lga kiu
Electronic door bells are prone to leakage currents that are always present around us. So you can get your wiring corrected by a professional. Solenoid based ding-dong bells are a much better option to prevent automatic bell ringing. Thanks for watching dear. Hope you liked the video...
Now it will not work when power cut🤨🤨🤭 the became AC. Bad idea
Everyone have invertors these days, however please share if you have a better idea. Thanks for commenting.
@@diycheapperfect
Don't act like a barking dog. My new calling bell have a problem like that. Was looking for a fast solution and came across your video, but your solution is not feasible at all.
1. Transformer is too heavy, costly.
2. Relay is ok buy you could use a cheaper, tiny parts like "Opto-coupler".
3. Instead of transformer a. 22micro-F capacitor can be used. So the modified cost would be within 20 rupees and minus the transformer weight. 👍
To make it work during power cut i will definitely find a way and will share to you. Untill then pray for me. Thanks for the quick reply
@@Nazmulsaidi sorry to sound like a baking dog.
In your opinion, my idea might not be feasible but it's working flawlessly since then.
& BTW, the transformer plays it's own important role. It assures that the bell only rings when a proper 220VAC is applied. It will prevent unnecessary ringing arising out of leakage current.
And obviously I'm not competing against you, so I'll be more than happy if you come up with a better idea. My wishes with you.
Bell 1 bar on krne pr continue baj rhi h Kia kre
Aisa bell kharab hone ki wajah se ho sakta hai. Aisi condition me bell me latching hone lagti hai. To aap bell ko replace karke dekho.
Thanks for watching.
Light aate hi dooe bell khud bajne lgti h or push button dabane par nhi baj rhi what problem
Bell ko circuit se alag karke direct ckeck kar lo. Agar direct lagane par bell sahi kaam kar rahi hai, to yeh aapke bell switch ya wiring ka fault ho sakta hai. Thanks for watching. Hope you liked the video...
Maine Bell ko hata krr wha pe led bulb lga dia or Bell puch button dabaya toh bulb jal rha h lekin Bell nhi on hoti push button ok h
Sabse phle aap yeh confirm karo ki aapki bell kisi normal socket me lagaane par sahi chal rahi hai.
Iske baad aap bell push button ki suplly ko LED Bulb ki jagah 100Watt Incandescent bulb se check karo.
Bas Yeh do kaam karne se aapko exact fault ka pata chal jaaega.
@@diycheapperfect normal socket me kaam kr rhi h
@@mohitsapna1997 iska matlab saaf hai ki aapke electrical wiring ya bell switch me problem hai.
Mere opinion me aapke bell connection par proper current available nahi hai. Bell ke solenoid ko high current (~5Amps) chahiye isliye vo nahi chal rahi hai, lekin LED bulb work kar raha hai kyuki usko bohot kam current chahiye (~0.04 Amps only).
ارے بھا اتنا لوچا کون کرے ۔ کوئی بنا بنایا ڈیوائس بتاو۔
بھائی مجھے ایسی کوئی ریڈی میڈ ڈیوائس نہیں معلوم۔ اس لیے میں نے یہ سب کیا۔
تبصرہ کرنے کا بہت شکریہ اور دیر سے جواب دینے کے لیے معذرت۔
Jitna bell ka dam hai ,,usse jada jugar ka dam hai ,, bekar ka vidio
Thankyou for your feedback dear viewer.
Mai aapko batana chahunga ki jab aapke ghar ke wiring me fault hota hai ya leakage current hota hai to new bell bhi theek se kaam nahi karti hai.
Aisi condition me aapko yeh jugaad karna hi padega.