Thanks for your Video sir and it is Good and Excellent. I have one doubt why Hot Runner are placed on core side and If cavity side is aesthetic we can use tunnel or submarine gate. If it has any reason.
Hello Brian, if needed you can directly import the feed system CAD in native file format and assign the attributes in Moldflow as feed system. However I would recommend to convert in to beam. I have created a separate video on curve extraction using Fusion 360 and transfer it to Moldflow. I hope this helps thanks
Thanks for your comments. Max Mesh Size (edge length) should not be more than 10x the product wall thickness. Say Nominal wall thickness is 2.5mm, max global edge length shouldn't be more then 25mm. However, Moldflow Meshing Algorithm from 2018 and above automatically selects the GE length based on features and thickness.
Thank you for posting; this was clear and informative.
Thanks for your Video sir and it is Good and Excellent. I have one doubt why Hot Runner are placed on core side and If cavity side is aesthetic we can use tunnel or submarine gate. If it has any reason.
How to define runner system from Cad software (Catia, NX) in Moldflow ?
Hello Brian, if needed you can directly import the feed system CAD in native file format and assign the attributes in Moldflow as feed system. However I would recommend to convert in to beam. I have created a separate video on curve extraction using Fusion 360 and transfer it to Moldflow. I hope this helps thanks
@@sachinfulsundar5012 Thanks for you guide
It good for me
How to troubleshoot shoot my weld line sir ..by processing or changing the gate postion
Thank you sir 🙏
Dear sir
Whether is standard for every product that the aspect ratio ratio for mid/dual must be less than 20
Sir plz demo with hypermesh or
How to determine max mesh... U r videos very help full live project...tq so much sir...
Thanks for your comments. Max Mesh Size (edge length) should not be more than 10x the product wall thickness. Say Nominal wall thickness is 2.5mm, max global edge length shouldn't be more then 25mm. However, Moldflow Meshing Algorithm from 2018 and above automatically selects the GE length based on features and thickness.