Thanks for the video. I installed mine this past weekend. And I am really enjoying it. I had already done a muffler delete, so it actually quieted it down a little. But I really like the setup especially the crossfire versus the stamped x-pipe. I don’t see a need at all for headers on this vehicle. Especially, since I don’t plan on any other modifications except the bolt one I have already done.
The thing is the factory exhaust is 3 in. So alot of new systems won’t sound to much different. I changed my mufflers and it was just enough for me. A deeper sound. Which that’s what it sounds like the borla did as well. Sounds good. Love the whine as well.
Awhile ago I had the Borla Attack muffler installed on my 2012 Ram 1500 4x4 . With 5.7 HEMI . MY exhaust stopped just at the rear end of the crew cab and to the passenger side of the cab . VERY LOUD . I was told my truck sounded like a NASCAR on the highway! My 2014 Ram 4x4 with HEMI Same set up, but a "RUMBLE " muffler made by Flowmaster was used . I'm told a person could hear my truck 1.5 miles away!!
i had a honda, after a custom stereo install, i had engine wine sort of sound from the speakers, 100% similar to this supercharger wine, at that time i didnt know about superchargers and their wine, i was hearing that first time, i hated it. changed the stereo, replaced the amplifier, then after months of agony of bearing that noise wine, i found a guy who put some small component at speaker level output behind the stereo and that solved the problem. few years later i came across all the boosted cars of this era and i hear this wine, and to my surprise, people love it. i hate it. thats not the only thing, i love v8 burbling sound, people also love that, at some point in my life i heard that for the first time too and fall in love, but this supercharger wine i hate it so much and would do anything to get rid of it. to me its like squeaking or old equipment noise. like in drag cars when they lift off and thats the sound coming off of the transmission nd drive line tunnel. btw, kudos to the red truck owner, very clean truck underside. neat nd clean nd no salt damage. very nice.
Any Ram with a BORLA Attack muffler installed will sound louder than most with real dual exhaust with headers ! Except the exhaust should dump out the side ahead of the rear tyres . Save weight don't run Pipes out the rear of truck !!
I JUST GOT MY 2021 TRX LAST WEEK SO PUTTING TOGETHER MY PLAN ON WHAT MODS ARE THE BEST AND LOVE THE DETAILED VIDEOS YOU ARE PRODUCING. I GOT LUCKY IN MY LITTLE TOWN THAT THEY HAPPEN TO GET A 2021 LOADED WITH ALL THE GOODIES MINUS THE RAM BAR (ON ITS WAY) AND THE TRAILER REVERSE (DIDNT NEED AS I USE TRAILERS FOR A LEAVING AND THIS TRUCK IS MY TOY SO NOT USING IT TO TOW MUCH ANYWAY, BUT ALL THE OTHER OPTIONS ARE INCLUDED SO HAPPY TO OF FOUND IT WITH ONLY 10000 MILES ON IT. I TRADED MY 2019 F150 FX4 LARIAT 5.0 AND HAD THE BORLA STYPE AND LOVED IT SO LOOKING FORWARD TO DOING THE BORLA SWITCH FIRE ON MY NEW BABY AS WELL AS THE B WOODY AIR INTAKE THAT IS OR SHOULD BE ON THE WAY. THANKS FOR GREAT TRX CONTENT!!!
Yeah… I don’t like anything that colors the sound of the motor. I can’t help but feel like I’m hearing Magnaflow or Borla instead of Ram if it’s not a straight pipe.
Nice video. I would add hi - temp anti - seize to all bolts, clamps, ground strap, and connections. Especially the factory threaded flange bolts. You'll actually be able to take it apart again in the future. The metal factory gaskets are junk, add hi temp silicone with those.
READ the Borla install instructions, ONLY CUT 2” behind driver side exhaust, not 5 like stated in the video or else you’ll end up with a bad seal at that location..
You'll supposed a 5 inch (dual) tips may Open up a lot of low end grunt better free flow and increase mpgs plus some rumbling thunder sound may make the cut would it? (Your thoughts and anyone else from experience). Any crackling and rasping is great sounds of music to my ears.
This should be a link for the maxxeon lights. They are pretty awesome and you can normally find them cheap on ebay. Thanks for the view! maxxeon.com/product/workstar-810-811-812-cyclops/
BY CHANCE HAVE YOU FOUND ANY UPGRADE THAT HAS INCREASED THE MPG LOL AND HAVE YOU FOUND A TUNE FOR IT, I HAD THE SCT TUNNER IN MY F150 BUT SEEMS THERE NOT AVAILABLE YET FOR THIS MONSTER...
The SNOW drive mode seems to be the secret ECO drive mode, I found a really decent 15-16mph average with snow mode. Try it and see what yours does! Thanks for the view!
They are Rally Armor universal fix splash guards, this video should talk about the install of them about mid way through I believe. Thanks for the view! ua-cam.com/video/-UIq-T1P6lI/v-deo.html
Stock sounds really good not going to lie
Thanks for the video. I installed mine this past weekend. And I am really enjoying it. I had already done a muffler delete, so it actually quieted it down a little. But I really like the setup especially the crossfire versus the stamped x-pipe. I don’t see a need at all for headers on this vehicle. Especially, since I don’t plan on any other modifications except the bolt one I have already done.
It is a pretty unique looking exhaust system. Thanks for the view!
Sounds really cool!! Much improvement over the stock setup.
It defiantly did add a unique tone to the truck. Thanks for the view!
The thing is the factory exhaust is 3 in. So alot of new systems won’t sound to much different. I changed my mufflers and it was just enough for me. A deeper sound. Which that’s what it sounds like the borla did as well. Sounds good. Love the whine as well.
Nice! What mufflers did you go with? Thanks for the view!
@@TylerPotter SLP
Same exhaust on my trx and those cold starts are way loud. Lucky for me l have cool neighbors!!!
It really does have a great sound to it! Thanks for the view!
God, that supercharger whine is sublime, especially with windows closed... My oh my.
That intake really makes it sound great! Thanks for the view!
@@TylerPotter bwoody?
@@luisarevalo8394 it has a JMB intake installed. Here is the video on it. ua-cam.com/video/6COHKarogtU/v-deo.html
@@TylerPotter does that give you any gains? Or use the oemfront hood scoops?
I would love to do this but neighbors already hate me when I start my TRX at 6am..lol
Yeah even stock they are loud! lol Thanks for the view!
Made me squint watching you use that saw without safety glasses. Good video. Keep them coming.
Yeah my squinting safety glasses aren't the best. Thanks for the view!
The new instructions says 2” cut. You were right. A lot of threads saying the 5” cut is messing with their positioning and what not.
Yeah what a small instruction error that can cause sooo much issue! Thanks for the view!
The startup made me smile
It did sound pretty awesome! Thanks for the view!
It sounds like an angry warthog. I love it.
It really does have a interesting tone to it. Thanks for the view!
Awhile ago I had the Borla Attack muffler installed on my 2012 Ram 1500 4x4 .
With 5.7 HEMI .
MY exhaust stopped just at the rear end of the crew cab and to the passenger side of the cab .
VERY LOUD .
I was told my truck sounded like a NASCAR on the highway!
My 2014 Ram 4x4 with HEMI Same set up, but a "RUMBLE " muffler made by Flowmaster was used .
I'm told a person could hear my truck 1.5 miles away!!
That sounds awesome! Thanks for the view!
i had a honda, after a custom stereo install, i had engine wine sort of sound from the speakers, 100% similar to this supercharger wine, at that time i didnt know about superchargers and their wine, i was hearing that first time, i hated it. changed the stereo, replaced the amplifier, then after months of agony of bearing that noise wine, i found a guy who put some small component at speaker level output behind the stereo and that solved the problem. few years later i came across all the boosted cars of this era and i hear this wine, and to my surprise, people love it. i hate it. thats not the only thing, i love v8 burbling sound, people also love that, at some point in my life i heard that for the first time too and fall in love, but this supercharger wine i hate it so much and would do anything to get rid of it. to me its like squeaking or old equipment noise. like in drag cars when they lift off and thats the sound coming off of the transmission nd drive line tunnel.
btw, kudos to the red truck owner, very clean truck underside. neat nd clean nd no salt damage. very nice.
I have totally heard that audio noise before! Thanks for the view!
I love that blower sound!
It is pretty awesome sounding! Thanks for the view!
@@TylerPotter You are very welcome and please keep up the interesting content.
Sounds mean as hell. If I heard it coming up behind me, I'd get out of the way for sure.
At least until the next gas station when it would need fuel! Thanks for the view!
Any Ram with a BORLA Attack muffler installed will sound louder than most with real dual exhaust with headers !
Except the exhaust should dump out the side ahead of the rear tyres .
Save weight don't run Pipes out the rear of truck !!
You should make videos instructing others on how to make videos. Very well done!
lol I try to cut out all the BS and just show good info. Though I do find myself talking to much at times! Thanks for the view!
@@TylerPotter Nice! I just got quoted $3700 for rotors and pads on my 2021 Durango Hellcat. Should I go OEM, or aftermarket to save $?
I JUST GOT MY 2021 TRX LAST WEEK SO PUTTING TOGETHER MY PLAN ON WHAT MODS ARE THE BEST AND LOVE THE DETAILED VIDEOS YOU ARE PRODUCING. I GOT LUCKY IN MY LITTLE TOWN THAT THEY HAPPEN TO GET A 2021 LOADED WITH ALL THE GOODIES MINUS THE RAM BAR (ON ITS WAY) AND THE TRAILER REVERSE (DIDNT NEED AS I USE TRAILERS FOR A LEAVING AND THIS TRUCK IS MY TOY SO NOT USING IT TO TOW MUCH ANYWAY, BUT ALL THE OTHER OPTIONS ARE INCLUDED SO HAPPY TO OF FOUND IT WITH ONLY 10000 MILES ON IT. I TRADED MY 2019 F150 FX4 LARIAT 5.0 AND HAD THE BORLA STYPE AND LOVED IT SO LOOKING FORWARD TO DOING THE BORLA SWITCH FIRE ON MY NEW BABY AS WELL AS THE B WOODY AIR INTAKE THAT IS OR SHOULD BE ON THE WAY. THANKS FOR GREAT TRX CONTENT!!!
Thanks! Glad you like the content!
Why are you yelling ?
@Oleg HVAC Tyler is not yelling...
Tyler brother thanks for the help earlier on the Catch Can.. Talk again soon..
@@TRX2021 hehe it’s an inside joke in the forums.
4what a lot of different exhaust for trx, heard several different in person, my personal best is the borla attack love it
It really does have a awesome sound. Thanks for the view!
I'm just going to straight piping mine. Pure motor sound.
That is a awesome option, save a ton of money and still sound great. Thanks for the view!
Yeah… I don’t like anything that colors the sound of the motor. I can’t help but feel like I’m hearing Magnaflow or Borla instead of Ram if it’s not a straight pipe.
Nice video. I would add hi - temp anti - seize to all bolts, clamps, ground strap, and connections.
Especially the factory threaded flange bolts.
You'll actually be able to take it apart again in the future.
The metal factory gaskets are junk, add hi temp silicone with those.
Yeah the anti seize would be a live saver in the future! Thanks for the tip and view!
Great video thanks
Thanks for the view!
Hey Tyler, it sounds good!!! Thanks for the detailed tutorial!! 👍👍
Thanks!
Dang those reds look good. Will be picking mine up any day now its in town!!!!
Awesome it does look really good! Thanks for the view!
READ the Borla install instructions, ONLY CUT 2” behind driver side exhaust, not 5 like stated in the video or else you’ll end up with a bad seal at that location..
Yeah this was one of the 1st kits that had the instructions wrong. Thanks for the view!
I have installed same pipe on my 2023 trx. Does the pipe have to have a drain hole?!
Using Borla makes your truck sound like it has been tuned! When it hasn't .
Borla company has tuned their mufflers for a distinctive sound.
It is a pretty crazy exhaust design that's for sure!
Simple,less pipe used!
Follow up with both beasts
I badly need too! Thanks for the view!
Nice
Thanks for the view!
Straight and x pipe dang
Wonder how this would sound with the hellephant engine
It should defiantly make some noise! Thanks for the view!
Man I need to put the intake on mine because that blower is SCREAMING lol
It does sound awesome! Thanks for the view!
@@TylerPotter absolutely man not a problem at all keep it up I get all my ideas for mine from you haha
You'll supposed a 5 inch (dual) tips may Open up a lot of low end grunt better free flow and increase mpgs plus some rumbling thunder sound may make the cut would it? (Your thoughts and anyone else from experience). Any crackling and rasping is great sounds of music to my ears.
I'm not for sure that would be an interesting test to see if it changes anything. Thanks for the view!
@@TylerPotter 👍 i have a 2012 1500 5.7l with factory duals that i like to see which exhaust i want for mine
Sorry but ditch the mud flaps on the white trx😊
I agree I normally hate mud flaps but with the off-road use I wanted to help with bed and body side rock chips. Thanks for the view!
What magnet lights are those, I need to get some
This should be a link for the maxxeon lights. They are pretty awesome and you can normally find them cheap on ebay. Thanks for the view!
maxxeon.com/product/workstar-810-811-812-cyclops/
😍😎❗
Thanks for the view!
I would just hate cutting up my factory exhaust all that money and you still have to cut up your stock setup
Yeah I wish there was another factory connection there at the back so it could just unbolt. Thanks for the view!
Tyler, will this void manufacturer warranty?
Since it is all behind the cat it shouldn't effect the powertrain warranty. Thanks for the view!
BY CHANCE HAVE YOU FOUND ANY UPGRADE THAT HAS INCREASED THE MPG LOL AND HAVE YOU FOUND A TUNE FOR IT, I HAD THE SCT TUNNER IN MY F150 BUT SEEMS THERE NOT AVAILABLE YET FOR THIS MONSTER...
The SNOW drive mode seems to be the secret ECO drive mode, I found a really decent 15-16mph average with snow mode. Try it and see what yours does! Thanks for the view!
@@TylerPotter I'll give that a try! Thanks for the awesome content!
Can I get a link to buy this ?
Here is borla's website. Thanks for the view!
www.borla.com/products/ram-1500-trx-mid-section-exhaust-system-60717
Is that a bwoody intake?
That TRX has the JMB intake. Thanks for the view!
How’s the drone on this setup?!
My buddy say it is not bad at all. Thanks for the view!
What brand mud flaps you have?
They are Rally Armor universal fix splash guards, this video should talk about the install of them about mid way through I believe. Thanks for the view!
ua-cam.com/video/-UIq-T1P6lI/v-deo.html
sounds great , just sucks on your back , good job
Yeah luckily the TRX is pretty tall. Thanks for the view!
Eye protection??!!
Trying to get workers comp..... Thanks for the view!
If you really want to improve that TRX get that ugly pitt st plate off of it.
How much horsepower will that be good for? lol Thanks for the view!
5 hp
Only if you add the sticker on the truck! lol Thanks for the view!