M5 - parameters re-setting operations
Вставка
- Опубліковано 27 сер 2024
- We will keep updating videos here to help our customers with the using and maintenance of e-bike and accessories. If you need more information, please contact our whatsapp:
+8615378710837
+8613213105602
email: support_hyuhome@163.com
![АЛАУДИНОВ у Скабеевой: эти их ВСУ нас НЕ ДОГОНЯТ 😁 [Пародия]](http://i.ytimg.com/vi/an0anqU4WGQ/mqdefault.jpg)
Very helpful, thank you
I have a Philodo h8 May I bought this M5 there but when axillary it doesn't move how to do it 😢
I've just brought the cycle and when I'm cycling the m5 display doesn't show the speed or distance, both are on the display screen but the don't work
It doesn’t let me to reset when those two buttons pressed. Pls help
Please help!
Hi guys, me and my cousin both got the same bikes, Tifgalop ES28 with an M5 lcd on them, but his settings go all the way to p18 or p20. and mine only goes to p09? so i cant change the same things he did, and i whant it to accelerate faster from start cos its slow moving from a standstill. any ideas for what i can do?
Hi, I have had the bike for a year. Few days ago, I can no longer get the bike to work on PAS 1,2 etc. The only electric finction that works is when I use the cruise option. Please help!
Is the code always 6666? I think i accidentally changed some of the really important ones i shouldn't have i dont want to kill my battery! I assume reprogramming and starting over will help? Thanks for the video
Thanks i got my pas working😂
Are you pressing the up or down arrow
Who has all correct codes?
How do you get the speed display working on the m5
what does that bar means?
hi I don't know the code to get into the settings, do you know how to find out the code?
Hi the code is 6666. Please try and see if it works
HI as soon as I reach 10kmph I get an annoying beep. How do I switch this off? Thanks
Hi my fathers bike doesn’t show how charged it is please help
I have this controller, and the energy bar always stays at 100%, is there a way of adjusting this?
lol same and the speed is way off, my ebike only does 32 mph however the display says it does 40
Hello, every time i go into the settings i can only change P0 P1 P2 P3 and i can not change the speedlimit,
Does anyone have a solution?
I have the same issue.... could you fix it in the end??
Im get E02 error , bike wont move , can you tell me what that means
Hi Andre, E02 means brake fault. There is power off cables on the brake lever. When we pull the lever, the power will be cut off. If the lever stucks and does not rebound well. It will keep the motor off. Please check the brake levers and see if they rebound fully. If they do, please check if the connections of the brake cables in the controller box are well connected. They are two same small terminals that contains two wires of same colors (green and white). If still not solved, please contact me by whatsapp +86 183 3981 0601
I have bought his item and after connecting the wires with my e-bike I attempt to turn it it but it won’t just shows a blank screen what am I supposed to do
Good morning, your controller might not be compatible with the M5 display. Where did you buy your bike please ?
@@alisonfeng4804 mine is doing the same. It's a gogobest
How do you boost your m5?
6666 doesn't work for me, I've done it many times, I get zero numbers instead of outputs, maybe I need another code
please try 568
Try 1801
Try 1908
Try 6007. 0000. 5555.
@@anfin4485, СПАСИБО! 1908 получился )))
Hello guys... How do you change "Manual" to auto the M5 display? My ebike electric motor is not working. No error code. I'm pretty sure I have set peddle assistant mode to 2
Same problem
Hey did you ever figure it out
Please help! Same problem!
The password 6666 didn’t work for my m5 controler
I have probleem my motor work only with the hand. But when I use my legs my motor don't work. Wat can I do ?
Hi the pedal assist mode might need some adjustment: Please follow the steps below:
1/ Check whether P10 is set to 0001. If it is, the bicycle will be in pure electric mode, and the assist will fail. If it's 0000 or 0002, the settings is correct.
2/ Try to adjust P13. P13 has three parameters, 0005, 0008 and 0012, you can try one by one, and check whether the assist mode works;
3/ Check whether the wiring in the controller is well connected, if the sensor cable is not connected to the controller, the power assist mode will not work.
If you need more information, please contact by whatsapp
@@alisonfeng4804 The setting for speed is P8 , but setting this to 25 does not limit the pedal assist to 25kmh. My bike has a 1000w motor and I guess that setting P8 to 25 will set the maximum wattage to 250w (25% of 1000w) but I would like to set it in a way that PAS1 DOES NOT assist to 15kmh bit rather 5 or 7kmh and PAS2 would go to 10 and so on . Now my pedal assist 2 makes the bike go up to 20+kmh . Thats a problem but would be nice to ride it legally. Can you explain how i controll the pedal assist limit to 25 kmh?
@@dennis9038 Hi was the bike bought from us please? If not, I am not sure if the settings arethe same.
How to instal a code
looking for the manual for M6C
Hello, sorry we don't have M6C display so far
speedmax avg error ... Sai come risolvere?
My m5 has a different button setup. An up button, a down button and an on off button on top. None of this works for me.
Different positions but same operation. Please let me know if you need more help. +86 183 3981 0601
Please help me! I need a factory to sell it. I tried with this video, but it doesnt work. Are the same buttons. Please. Thanks.
How to change password on m5
How to enter security mode and reset ?😊
Hi are all password 6666?
What is E 008 ???
P08: speed limit: No. 2 protocol, range 0-100km/h, 100 means no speed limit; 5S protocol, 0-41km/h; The input data here indicates the maximum operating speed of the bike: for example, input 25, indicating that the maximum operating speed will not exceed 25km/h; the drive speed is maintained at the set value, Error: ± 1km/h; (power assist and throttle speed both limited) Note: The value here is on km as the benchmark. When the unit setting is converted from km to mile, the speed value of the display interface will be automatically converted to the correct mile value, but the speed limit value data set at this menu under the mile interface is not converted, which is not consistent with the actual display mile speed limit value;
Hi, what does error 008 mean please?
Hi E08 means throttle fault. It means the wire connection or the throttle itself may have some problem.
Hi thank you so much for your reply, I found the problem, it was the throttle wire connector that connects to the motor, it got a little wet while out in the torrential rain, all fixed and back to been the best bike I've ever owned, thank you 😊
@@malcolmlambie7519 Thanks a lot for letting me know. Have a niced day😃
Why when i press these two buttons it wont let me in factory settings??
E010 code?
E10 means communication receiving fault. There might be causes for it:
1\ the P settings are not in factory place;
2\ one of the cable connections might be loose;
3\ one of the display, controller, throttle, or assist sensor might be defective;
4\ the connection of the cables might be moisture or dirty, which needs to be cleaned with Spray cleaner;
Mi serve in Italiano grazie
Scrivetemi a support_hyuhome@163.com, vi invierò il pdf in italiano.
@@alisonfeng4804 ciao non riesco ad entrate nel menu del conpiuter della bicicletta...tengo premuti le due frecce contemporanee mi appaiono quattro punti lampeggianti...forse serve una pasfor x entrare nel menu? Se è si dove la trovo grazie
@@rolandobardi2293 6666
Anyone know how to enter into security pin mode and reset to your own pin ?😊