How to weld external corners of vinyl flooring. Done by Bfs. Mostaffa Asghari ..مصطفی اصغری قرهباغی
Вставка
- Опубліковано 8 вер 2024
- Thanks for watching this video on how to weld vinyl flooring.
Are you a small business owner, a flooring contractor, or an independent floor layer?
Check out The Flooring Book: theflooringboo...
Designed by experts with over 20 years of experience in the commercial flooring industry
The Flooring Estimate Log Book allows you to draw up floor plans and create accurate estimates for your customers.
Key Features:
100 Estimate Forms + 100 Pages for Floor Plans
Index pages to easily find estimates.
Notes Pages
Space to Record Useful Information & Contacts
Tips for those who are new to estimating costs
Been flooring for 20 yrs now low and slow is the best advice I could give!! This video is the best I’ve seen for cove welding good demonstration did a good job mate ;)
Thanks for your kind reply.
Yes welding is the last and difficult part of flooring. It requires patience and confidence..
Please subscribe And like the video
There will be more flooring video every week .
So if you have better way and any video we can learn from you thar would be great.
Thanks
No worries! I’m in Australia and Australian standards wont let us do externals like that anymore sometimes get away with it we have to install Butterfly to all externals!! Or they will defect it ): installing a butterfly to nib wall and welding could be a good vid to do or Marmo welding a lot of ppl struggle with that 👍
@Tiggz
Ok .that means you either don't use cove former at all or you may use mini cove former .with big cove you wouldn't get a good B Fly corner ..
But here in UK we never get asked to do it ...I know how its done ..I shall do some video on that .
Thanks
What’s butterfly? If no one minds my asking.
@@MrJcollins95
ua-cam.com/video/otW2jDIl0ro/v-deo.html
Subscribe and learn more flooring.
ا
Excellent perfect five star job ⭐⭐⭐⭐⭐👍
Beautiful stuff.
Nice you make it look so simple
Hi bro ,what number do you have your welder on ,seems like you had plenty time for the externals .....I've not done much externals ,an6 time I have I've burnt it ever so slightly 😅 🙃 ....8 normally have it set on 4 for the flat welds & don't change the temp when going up the cove ,do you think this is why ?👍
Hi.
Thanks for watching our channel
..I always do my enternal &external first.
While cooling I put the number up and do the long straight one.
The welding number really depends on the materials and vinyl ..
I normally go for 4 to 4.5 for corners and 5.5 to 6 for straight one.
But I have been welding for over 15 years now..long long time .
Please share and subscribe to our channel
@@bespokeflooringsolutionsltd thanks
Try 4-5 for mitres, if it burns turn the temperature down a little. You will find a setting that will melt the pvc but not burn it, that’s the ideal temperature, all guns are a little different. It also helps if you bend the tip of the speedwell up a little, this will help a lot with mitres, especially external ones. Let the weld rod go cold before trimming, this also helps, trim the vertical part of the weld with a sharp Stanley knife, then shape it up with the square Xacto blade, again this will help.
@@davidgatfield6854 spot on mate ,appreciate the help .....had a good few jobs since my comment as I've recently went self employed .......always appreciate other fitters info tho as every days a school day lol 👍🏻
What is best temp for this?
Bcz when I do like this so slowly plastic burn quickly if I decrease temperature then cutting time joint come outside no welding
Thanks for watching our channel and please share and subscribe.
Put it on number 4. Or 4.5.
But you must take it nice and slow 🐌.
Always practice on bit of nonusble vinyl then on the project.
Good luck .
ua-cam.com/video/6bFUdk8bt5E/v-deo.html
Watch my diy channel. Great videos there for learning 👌
Should try wrapping them around butterfly Style 👍
The client would like that way.
I havnt done that. But i do like butterfly style to be honest.
I have done it this way for 17 years so im so used to it. Thanks for commenting
ua-cam.com/video/6bFUdk8bt5E/v-deo.html
Watch my diy channel. Subscribe
There is some good videos
You don’t groove the corners before welding?
We groove all the joints .not the external corner
@@bespokeflooringsolutionsltd I’m asking about the external corners. So you can weld those without grooving them? Does it have to be cut with a gap I guess?
@CRASS2047
Yes 2mm gap is sufficient for a good welding. But try to be so slow with it .
You can groove the internal one