If only you boys were in the Scottsdale, AZ area. Hard to find good and honest club fitters here who really have your best interest above their own. All I see and hear in town is upselling. If anyone here knows of a reputable club fitter in or near Scottsdale, please let me know as I’m in the market for new clubs. Cheers.
I have gone through two fittings in the last two years. Both done by same company, but at two different locations. One fit had me in clubs one inch over in length ( 38 for 7 iron), with a 63 degree lie angle. Second fitting result; 1/4 inch short, 61 degree lie angle. Distance, etc. was marginally different. I was confused by the results, so paid for the fitting and left. Lot of upselling going on even when I gave them my budget. I wish you were closer, lol. Thanks for the knowledge, it is very helpful. Willingness to pay for 6-GW in irons, $1200. Most asked $2100 for same six irons. Full 14 clubs, was asked for $5600.
200.00 a stick is very reasonable, and I don’t blame you there shouldn’t have been that big of a discrepancy with length, pretty sure you didn’t shrink.😀
I guess I'm playing some dinosaurs. 4 to pw are Ping i3's. Still work, and when I get in to be fit for new irons, I'm very curious to see how much of an improvement there will be with today's tech. BTW, Great video and breakdown of rhe fitting process
My last fitter gave me 4 different heads to swing and then said okay. I have this last year model that will work for you on my shelf. 😂Oh and no lie variants, just standard.
That is a without question a crappy result. I’m ok with comparing last year to this year so individuals can make an informed decision, but in the end the recommendation should always be about the number and analysis, even if the choice is I like this option as it’s a good mix of performance and cost. I’m Sorry to hear that happened, if your ever in the area look us up, as I’m about to make a huge announcement next week.😀
20 year old titliest 3 wood is the oldest club I still use. I bought a new stealth last yesr for more distance, but my smash factor is higher with the old Titliest.
Sometimes this just happens and when it does I never try to argue, dispute or rationalize why it is what it is, we just need to know it is. Thanks for sharing.
My most expensive golf club was a custom built Bobby Grace Side Saddle putter....better part of $1000!!! Upside is I putt lights out with this monster!!
Cost really becomes irrelevant especially if it does exactly what it’s suppose to and from the sound of it you have a great level of confidence with that bad boy.
It’s a really good question and there appears to be enough interest that we are going to do a video sharing some practical tips. Thanks again for the support and kind words.
They are really much better, the new T’s are small and I don’t imagine selling many of them if I’m lucky maybe 1-2 sets but the S’s we should do pretty good with.
Ive been too one fiting for my putter. I knew the price it was gonna be about. Never going to the fitting place again cause intalked to him about an average iron fitting price and he said 3k amd i was like hell no. Proce was $550 with fitting fee and the putter (Evenroll)
Had a fitting in Oct and chose Midsize grips assuming they wld match the swing weight in the build.... WRONG they claimed they couldn't because they don't have tip weights. I had to re grip some to standard and add lead tape to wedges to get close to suitable swing weights. When fitted using a 7 iron it always seems a risk to trust that the wedges will be OK.
Very good point, traditional wedges should be fit separately, if it’s a PW or GW in the iron set then they can be built off of the 7 iron specs as those wedges are more like irons then they are a traditional wedge. I’m shocked about the tip weights that’s a pretty lame excuse. Thanks for sharing.
Would you rather get fit by someone that has been coaching you for the last 6 months or by someone that has never seen you swing before to get fresh set of eyes on your swing?
Fresh set of eyes, what I will share with you is technique and gear are two distinct skills on their own, and each require time and experience to become proficient. With that said it’s hard to find someone who is really good at both. I do believe the gap is closing but I would say it’s the fitter to instructor that’s closing faster, as the fit side requires so much more, not only do you need the knowledge of the technology but you also need the technology and the fit matrix to become an expert in that space as that takes a much larger investment. So my advice is search for a fitter who can compliment the instruction and vice versa. You achieve this by disclosing what your concerned about and what your currently working on. Lastly if you have a coach/instructor who says they can fit but one doesn’t have a launch monitor or a vast fitting matrix to try a bunch of options then just tell him you would feel better if you were able to compare more brands and more options to make a lot informed decision before investing a single dollar.great question.
I would really like to get fitted but I can’t seem to hit indoors. I don’t know what it is, lighting, mats, alignment for the target or just stressing out. I just can’t seem to relax and hit my normal routine. Very frustrating. Wish you were in Austin.
I got a new Motore shaft stiffer but better feel and have it turned up to 16 degrees to help launch conditions. It just does what I need it to do.@@SwingFit
@@seegarsmkr there’s nothing wrong with a retro fit if it achieves the outcome. In fact you just gave me an idea for an upcoming video. Thanks for comments and support.
Are you better off paying for the fit or going someplace fitting is included if you buy clubs? I feel if it is included, they are going to try an upsell.
So funny that you ask, I would 100% agree with that statement, you know what they say nothing is ever free they will somehow find a way to recoup that cost the unfortunate thing is some fitters will have about 6-7 opportunities to get it back.
So we do this all the time and what makes it easier for us is we fit off of the 7 iron which is a little more closer to the cutover. The question we need to determine is if the combo is going to be a 2/5 split or a 3/4 split. So I will try both 7 irons to see which one we need. But it’s more easier then one might think. In regard to how we are able to just fit for the 7 or 6 iron, is simple we only need the one club to determine the build specs for the rest of the irons as they are meant to compliment one another so as long as the specs were identified correctly during the fit an experienced builder can easily build the surrounding irons. Great question.
Got fitted there today. Can attest that he's the MAN!
My 7 iron went from 155 to 170 with less dispersion!
Thanks for sharing bud. I’m really glad you gave us an opportunity as I know your game is only going to get better..
Big Bertha Steelhead plus #5
That head was a club ahead of its time for sure.
If only you boys were in the Scottsdale, AZ area. Hard to find good and honest club fitters here who really have your best interest above their own. All I see and hear in town is upselling. If anyone here knows of a reputable club fitter in or near Scottsdale, please let me know as I’m in the market for new clubs. Cheers.
Thanks for the kind words.
I have gone through two fittings in the last two years. Both done by same company, but at two different locations. One fit had me in clubs one inch over in length ( 38 for 7 iron), with a 63 degree lie angle. Second fitting result; 1/4 inch short, 61 degree lie angle. Distance, etc. was marginally different. I was confused by the results, so paid for the fitting and left. Lot of upselling going on even when I gave them my budget. I wish you were closer, lol. Thanks for the knowledge, it is very helpful.
Willingness to pay for 6-GW in irons, $1200. Most asked $2100 for same six irons. Full 14 clubs, was asked for $5600.
200.00 a stick is very reasonable, and I don’t blame you there shouldn’t have been that big of a discrepancy with length, pretty sure you didn’t shrink.😀
Sounds like an experience a friend of mine had at Club Champion. 🏌️♂️
Great info here, much appreciated. Keep these videos coming, loving them all .
Anytime I’m actually thinking about doing a livestream this week, we’ve never done one before so I want to see if can pull it off.
appreciate your knowledge. Your stage presence is a large asset and presentation flow is spectacular!!
Thanks for the kind words, I’m no Tony Robins, but I am trying to do better with each video😀
Amazing stuff! Great information and content. Thank you!
I’m glad you found it helpful.
I guess I'm playing some dinosaurs. 4 to pw are Ping i3's. Still work, and when I get in to be fit for new irons, I'm very curious to see how much of an improvement there will be with today's tech.
BTW, Great video and breakdown of rhe fitting process
Thanks for the support and kind words.
I bought some used clubs after mine broke. I knew they were old but I finally looked them up. Titelist 962b from 1993….. my clubs are older than I am
That’s crazy, but I have also seen some nice relics as well.
Great video! Thanks a lot for sharing!
Anytime, thanks for the support.
My last fitter gave me 4 different heads to swing and then said okay. I have this last year model that will work for you on my shelf. 😂Oh and no lie variants, just standard.
That is a without question a crappy result. I’m ok with comparing last year to this year so individuals can make an informed decision, but in the end the recommendation should always be about the number and analysis, even if the choice is I like this option as it’s a good mix of performance and cost. I’m Sorry to hear that happened, if your ever in the area look us up, as I’m about to make a huge announcement next week.😀
1981 ping copy 9 iron converted to a chipper
3 back surgeries and a 4 way neck fusion
Still can play pretty much
Still playing, that’s the only thing that matters. Thanks for sharing.
20 year old titliest 3 wood is the oldest club I still use. I bought a new stealth last yesr for more distance, but my smash factor is higher with the old Titliest.
Sometimes this just happens and when it does I never try to argue, dispute or rationalize why it is what it is, we just need to know it is. Thanks for sharing.
My most expensive golf club was a custom built Bobby Grace Side Saddle putter....better part of $1000!!! Upside is I putt lights out with this monster!!
Cost really becomes irrelevant especially if it does exactly what it’s suppose to and from the sound of it you have a great level of confidence with that bad boy.
Hello, excellent content, i learn a lot with your videos. Thank you very much. Do you know where I can get the certification to be a club fitter?
It’s a really good question and there appears to be enough interest that we are going to do a video sharing some practical tips. Thanks again for the support and kind words.
Dang.. im still gaming the ping blueprint irons. Havent tried the new blueprint S yet, but looks impressive so far.
They are really much better, the new T’s are small and I don’t imagine selling many of them if I’m lucky maybe 1-2 sets but the S’s we should do pretty good with.
Ive been too one fiting for my putter. I knew the price it was gonna be about. Never going to the fitting place again cause intalked to him about an average iron fitting price and he said 3k amd i was like hell no.
Proce was $550 with fitting fee and the putter (Evenroll)
That’s pretty steep. I can do a full bag set for 3500-4000
Had a fitting in Oct and chose Midsize grips assuming they wld match the swing weight in the build.... WRONG they claimed they couldn't because they don't have tip weights.
I had to re grip some to standard and add lead tape to wedges to get close to suitable swing weights. When fitted using a 7 iron it always seems a risk to trust that the wedges will be OK.
Very good point, traditional wedges should be fit separately, if it’s a PW or GW in the iron set then they can be built off of the 7 iron specs as those wedges are more like irons then they are a traditional wedge. I’m shocked about the tip weights that’s a pretty lame excuse. Thanks for sharing.
Would you rather get fit by someone that has been coaching you for the last 6 months or by someone that has never seen you swing before to get fresh set of eyes on your swing?
Fresh set of eyes, what I will share with you is technique and gear are two distinct skills on their own, and each require time and experience to become proficient. With that said it’s hard to find someone who is really good at both. I do believe the gap is closing but I would say it’s the fitter to instructor that’s closing faster, as the fit side requires so much more, not only do you need the knowledge of the technology but you also need the technology and the fit matrix to become an expert in that space as that takes a much larger investment. So my advice is search for a fitter who can compliment the instruction and vice versa. You achieve this by disclosing what your concerned about and what your currently working on. Lastly if you have a coach/instructor who says they can fit but one doesn’t have a launch monitor or a vast fitting matrix to try a bunch of options then just tell him you would feel better if you were able to compare more brands and more options to make a lot informed decision before investing a single dollar.great question.
Great response. Thank you!
I'm playing TaylorMade M2s from 2016. I think it's time for an upgrade.
I would agree. 😀
RBZ 6 wood
Still have a Yes golf putter, Abbie Forged model
A putter a head of its time in regard to pushing tech.
I would really like to get fitted but I can’t seem to hit indoors. I don’t know what it is, lighting, mats, alignment for the target or just stressing out. I just can’t seem to relax and hit my normal routine. Very frustrating. Wish you were in Austin.
If travels ever bring you to the DC region, please be sure to look us up.
My oldest club is a Callaway Epic SZ 3 wood.
Good one back in the day.
I got a new Motore shaft stiffer but better feel and have it turned up to 16 degrees to help launch conditions. It just does what I need it to do.@@SwingFit
@@seegarsmkr there’s nothing wrong with a retro fit if it achieves the outcome. In fact you just gave me an idea for an upcoming video. Thanks for comments and support.
My current irons are from, I think, 2004. Nike Pro Combo Os. I am thinking about being fit into something new.
I went out and hit some T150’s….did they ever feel nice!
Nikes were good. I really hated to see them depart the way they did, but I would say finding something better shouldn’t be. Problem. 😀
Scotty Cameron Futura putter 2003
Tommy Armour 855 2 iron. lol
All my wedges are made by Scratch golf, only ones I can consistently hit.
That’s awesome to hear, something to be said about the quality of work and confidence.
Are you better off paying for the fit or going someplace fitting is included if you buy clubs? I feel if it is included, they are going to try an upsell.
So funny that you ask, I would 100% agree with that statement, you know what they say nothing is ever free they will somehow find a way to recoup that cost the unfortunate thing is some fitters will have about 6-7 opportunities to get it back.
How do I get fit for a combo iron set when the fitting is with a 6 iron only?
You don't get fit for every club at a fitting, you have to take a leap of faith at some point. No way a fitter can cover all scenarios.
So we do this all the time and what makes it easier for us is we fit off of the 7 iron which is a little more closer to the cutover. The question we need to determine is if the combo is going to be a 2/5 split or a 3/4 split. So I will try both 7 irons to see which one we need. But it’s more easier then one might think. In regard to how we are able to just fit for the 7 or 6 iron, is simple we only need the one club to determine the build specs for the rest of the irons as they are meant to compliment one another so as long as the specs were identified correctly during the fit an experienced builder can easily build the surrounding irons. Great question.
So how then do you know what the top iron in the bag should be - i.e. at what point do you transition to hybrids or fairway woods?@@SwingFit
Sorry for the delay, you know when consistency starts to drop off meaning more bad shots, and poor height. Those are my two red flags
Over $5000 PXG fitting
We use to sell PXG but found for the cost they simply performed marginally better but it was never night and day to justify the expense.
Many club fitters are primarily club sellers. Buyer beware.
Without question, its definitely in the consumers best interest to do a little research before going down the fitting path.