Fisher plows are very weak compared to years ago. Had a 9 straight blade bend in half. Lot of electrical issues. Switched intire fleet to boss 9.2 dxt. Built very heavy no issues in 4 years😊
Thanks for the heads up on the frame work. I’ve had fisher plows since 86’, nothing compares. The xv2’s aren’t as tough as the ezv’s were years ago, but I still consider my xv2 the best plow I’ve ever owned. Only issue I have is the truck side battery to plow harness is about 8-10” too short, which can piss a guy off hooking it up in lake effect snow country where I’m at.
It's probably an issue of how the harness was routed. I've installed hundreds of these things and I've never run into that issue. Sometimes people run them so you can hide the plugs behind the licence plate when not in use but if you don't mind having the plug visible you can run it through that rubber flap between the grill and the bumper to get a few extra inches.
@@NEILSWORLD that’s what happened when I ended up purchasing a “ long” version of the harness ( 28585 comes to mind). The one installed when I bought truck/ plow pkg just barely and I mean barely came through lower right side of radiator area, into grill where they’ve always installed the ones before. There was like zero play in them to get a hand inside grill area to r hook up power harness. The light harness was fine. But then, the dealer installed it, not a Fischer dealer, so the other guys probably spot on. With the longer power cable, and me installing it, I ended up w what you mentioned. Only thing I’m gonna miss is slipping my bare hand up in there, warming the boot up with my bare hand so its pliable, then scraping my bare skin against the plastic grill and fqsteners sticking out behind and sweating like that girl in the Exorcist movie. I mean, man, those were the days! ❄️❄️😁
@@ACERRUBRUM31 the lengths of the harnesses are seemingly random on some of them. The light harness has about a foot of extra slack, the power harness has just enough (but the ground has about a foot more than you need), and the controller harness is so long that you have to fold it multiple times and zip tie it to itself. If you're putting it in a newer model diesel and/or getting the LED plow lights good luck finding the space for everything. I'm just venting at this point I swear I don't hate my job 😂
what size truck do you plow the 10fter blade wirh. I have a 2024 chevy 3500 with a snow plow prep package looking to do a 9.6 inch V blade. have some people telling me to big it will weigh to much.... Im not seeing that a 9.6 ft V blade would be to big. thoughts
I've been running the 9'6" and the 10'6" xv2 blade on my Ford 350 single rear wheel without any problem. Fisherplows.com has ematch where you can put in your trucks info and it will show the plows that they suggest for your particular truck.
That was a nice upgrade video. Wish things were built to last as they used to be. Nowadays everyone is so quick to buy the newer version cuz bigger is always better. Maybe. But they have to have the wrinkles ironed out first such as the headlight/visibility issue. I foresee lights being installed right into the plow in the near future.
Do you find the chain rubs against the plastic pump housing when fully raised? I've had that problem with the new fisher plows. Especially the xls. Love these units otherwise.
While on the army truck it didn't matter because I have lights up on the mirrors aimed down in front of the plow. I used it mostly on the Ford this winter so I installed head light risers.
The one I saw in your video is a nine and a half wide plow. The Snow control piece in the middle of the 10 and a half is totally redesigned and different than the 9 and 1/2. I've been using my 9 and 1/2 for 9 years no problem with the snow control piece on that one.
@@davelindo3856 the one on my nine and a half for some reason isn't tight either I noticed it moves around with the wind. 😆 The 10 and a half is totally different, it weighs 20 lb.
Fisher plows are very weak compared to years ago. Had a 9 straight blade bend in half. Lot of electrical issues. Switched intire fleet to boss 9.2 dxt. Built very heavy no issues in 4 years😊
I’m considering switching to fisher. I have a 7 6 HTX & need something bigger. Should I stay boss or go fisher ?
@Snortolodmyr-SS-Cokelensky go with what you like. I like Fisher. I'm sure they all have their problems.
I could not stop laughing at "okay that wasn't a good idea" with the paper weld blanket! I am still laughing about it...
Lol, I just thought I would leave it there for the black paint. 🤣
@@NEILSWORLD that part made my day! Keep up the great work.
@@SeanFillner did you notice the drone crash at the end. 😲😅
@@NEILSWORLD no?
Really nice job on that reinforcement!
Fisher Engineer here, thanks for the design fix
Just put the check in the mail 😂
Great job, We run 3 XV2's , awesome plows
Thanks, I really like them.
I’ve ran xv2 for past 2 years and I’m hard on it no issues that’s the my old xv on my 2015 that I got used no issues
I'm talking about the 10'6" one
Thanks for the heads up on the frame work. I’ve had fisher plows since 86’, nothing compares.
The xv2’s aren’t as tough as the ezv’s were years ago, but I still consider my xv2 the best plow I’ve ever owned.
Only issue I have is the truck side battery to plow harness is about 8-10” too short, which can piss a guy off hooking it up in lake effect snow country where I’m at.
It's probably an issue of how the harness was routed. I've installed hundreds of these things and I've never run into that issue. Sometimes people run them so you can hide the plugs behind the licence plate when not in use but if you don't mind having the plug visible you can run it through that rubber flap between the grill and the bumper to get a few extra inches.
I actually have bought a new power cable since then and it was that much longer.
@@NEILSWORLD that’s what happened when I ended up purchasing a “ long” version of the harness ( 28585 comes to mind). The one installed when I bought truck/ plow pkg just barely and I mean barely came through lower right side of radiator area, into grill where they’ve always installed the ones before. There was like zero play in them to get a hand inside grill area to r hook up power harness. The light harness was fine.
But then, the dealer installed it, not a Fischer dealer, so the other guys probably spot on. With the longer power cable, and me installing it, I ended up w what you mentioned.
Only thing I’m gonna miss is slipping my bare hand up in there, warming the boot up with my bare hand so its pliable, then scraping my bare skin against the plastic grill and fqsteners sticking out behind and sweating like that girl in the Exorcist movie. I mean, man, those were the days! ❄️❄️😁
….swearing not sweating
@@ACERRUBRUM31 the lengths of the harnesses are seemingly random on some of them. The light harness has about a foot of extra slack, the power harness has just enough (but the ground has about a foot more than you need), and the controller harness is so long that you have to fold it multiple times and zip tie it to itself. If you're putting it in a newer model diesel and/or getting the LED plow lights good luck finding the space for everything. I'm just venting at this point I swear I don't hate my job 😂
Nothing beats phosphorous acid as rust prevention and primer.
Great job on the repair
Thank you. In my opinion it should be a recall. I'm just glad it didn't fall off and I ran over it.
Love Paper fire ! BRIGHT IDEA 💡
The paper was there for painting purposes. The bright idea was putting out the fire,😁
what size truck do you plow the 10fter blade wirh. I have a 2024 chevy 3500 with a snow plow prep package looking to do a 9.6 inch V blade. have some people telling me to big it will weigh to much.... Im not seeing that a 9.6 ft V blade would be to big. thoughts
I've been running the 9'6" and the 10'6" xv2 blade on my Ford 350 single rear wheel without any problem. Fisherplows.com has ematch where you can put in your trucks info and it will show the plows that they suggest for your particular truck.
I put a light on the center plate top.
That was a nice upgrade video. Wish things were built to last as they used to be. Nowadays everyone is so quick to buy the newer version cuz bigger is always better. Maybe. But they have to have the wrinkles ironed out first such as the headlight/visibility issue.
I foresee lights being installed right into the plow in the near future.
Thanks. Lights in the plow 🤔. Those would have to be some rugged light bulbs to take on that vibration.
Do you find the chain rubs against the plastic pump housing when fully raised? I've had that problem with the new fisher plows. Especially the xls. Love these units otherwise.
I haven't noticed that. Now I'm going to have to check to see how close it is. 😆
Nice video!
Thanks
never seen that center plate issue before. Could it just be a defect on your specific plow or is it a known Fisher issue?
That new centerpiece for the new 10 and 1/2 xv2 is heavy and the vibration just cracked it. I don't know why it won't happen to all of them.
@@NEILSWORLD ah i missed that. I got an 8.5 xv2
Compared to a Boss them westerns & Fishers are just thin Junk ...jmo
That's why they are different brands. Different strokes for different folks. They all push snow.😃
The installer located your plig on pass side . Raise your headlights or JUST BUY A BOSS !!!
While on the army truck it didn't matter because I have lights up on the mirrors aimed down in front of the plow. I used it mostly on the Ford this winter so I installed head light risers.
Think this is going on with mine.
The one I saw in your video is a nine and a half wide plow. The Snow control piece in the middle of the 10 and a half is totally redesigned and different than the 9 and 1/2. I've been using my 9 and 1/2 for 9 years no problem with the snow control piece on that one.
@@NEILSWORLD checked it out today. Just two bolts holding in on we’re lose. Looked fine until I put a wrench 🔧 on it.
@@davelindo3856 the one on my nine and a half for some reason isn't tight either I noticed it moves around with the wind. 😆
The 10 and a half is totally different, it weighs 20 lb.