Is your mower cutting uneven or leaving strips of grass? Maybe this video will help.

Поділитися
Вставка
  • Опубліковано 18 лип 2021
  • My mower was cutting uneven and leaving strips of grass between the blades. I have a Bad Boy ZT Elite with a 60" cut. I have three blades and each were at different heights. I adjusted the blades with washers and got them all the same height. The mower cuts even now and my yard has never looked better. Try what I did if you are having the same issue. Now my mower is about six years old and I have beat the ever lovin' crap out of that thing so my deck is pretty jacked up. If you have a brand new mower and its cutting uneven I would suggest you take it back to the dealer and see if maybe you have other issues. Thanks for watching.
    #badboymower
  • Розваги

КОМЕНТАРІ • 41

  • @randyjohnson1412
    @randyjohnson1412 3 роки тому +20

    My mower cuts crooked since it was new. I’ll have to check this out. Thanks for the info.

  • @markkelly8714
    @markkelly8714 Місяць тому +1

    My Bad Boy cut level from day one and I’m on my third mowing season. If you mow back and forth on one direction it’s dead nuts on.

  • @anthonyfratianni8708
    @anthonyfratianni8708 Місяць тому

    I’ve been thinking of this solution myself and I’m going to try it- thank you

  • @paulmacken8476
    @paulmacken8476 Місяць тому

    Thanks, I’ll give this a try!

  • @yo_ez1590
    @yo_ez1590 3 роки тому +14

    I know you explained what you did, but can you do a video on how you did it. Type of washers. Step by step. I've always been a "non verbal learner" I hate it.

    • @IttakesWill
      @IttakesWill  3 роки тому +12

      My email address is in my about section. Go there and send me your email address and I will do a video for you and send it to ya.

    • @yo_ez1590
      @yo_ez1590 3 роки тому +7

      @@IttakesWill my email is jesussegoviano68@yahoo.com

    • @IttakesWill
      @IttakesWill  3 роки тому +8

      @@yo_ez1590 I'll work on that for you this weekend.

    • @frankfritz7878
      @frankfritz7878 3 роки тому +25

      @@IttakesWill that’s a solid move my man. Not everyone would do a personal video for a complete stranger. Total props bro.

    • @John-oj8ms
      @John-oj8ms 11 місяців тому

      Your not alone😂 I need a birds eye view of things to truly get it

  • @weekendhomeprojects
    @weekendhomeprojects Рік тому +1

    My analytics shows your video is suggesting my video. Hope yours reaches a million...a rising tide lifts all mowers.

    • @IttakesWill
      @IttakesWill  Рік тому

      That would be awesome. Thank you

    • @IttakesWill
      @IttakesWill  Рік тому +1

      Your channel is awesome by the way. I just subscribed.

    • @weekendhomeprojects
      @weekendhomeprojects Рік тому +1

      @@IttakesWill Thank you kind sir! I just sub'd to yours too :) Keep up the good fight.

  • @Im76110
    @Im76110 2 роки тому +4

    lol the cat at the beginning

    • @IttakesWill
      @IttakesWill  2 роки тому

      That's was a good cat. The neighbors dog has since killed it.

    • @k9under
      @k9under 3 дні тому

      @@IttakesWill Wow.

  • @klamb3293
    @klamb3293 Рік тому +1

    Great advice

  • @417Keto
    @417Keto 2 роки тому +2

    I wonder why the maker bad boy or others would put the blades at different heights?
    About what I did to my new fridge freezer door to keep it from building ice up, washers to shim it up a bit at the hinge.
    Good demo bud!

    • @IttakesWill
      @IttakesWill  2 роки тому +1

      Thank you. Appreciate the view. My deck is pretty jacked up. I've had it so long I can't remember how it cut when I first got it. I'm sure it was jacked up then. Lol

    • @John-oj8ms
      @John-oj8ms 11 місяців тому

      Job security

  • @Jay-kv9xc
    @Jay-kv9xc Місяць тому

    Will the blades hit each other if they are evenly leveled?

  • @ryanmckinney4346
    @ryanmckinney4346 Місяць тому

    How many washers for the two blades

  • @ab-tm4lx
    @ab-tm4lx 2 роки тому

    this got it be the most scariest video i ever seen

    • @IttakesWill
      @IttakesWill  2 роки тому +7

      Is this your first time ever being on the internet?

  • @stevieboyo007
    @stevieboyo007 2 роки тому +1

    I have a 42 inch cut...it leaves an 8 inch strip right down the middle...wassup with that? I have to cut the lawn twice...3 acres

    • @IttakesWill
      @IttakesWill  2 роки тому +1

      That's crazy. Wish I could help you out on that one but I don't have a clue. Sorry.

    • @sonnyjs15
      @sonnyjs15 2 роки тому +1

      Did you find your answer? I have the same issue. 3 new blades and now it cuts mohawks! 😡

    • @stevieboyo007
      @stevieboyo007 2 роки тому +1

      @@sonnyjs15 I had let a little too much crud build up inside the deck. Scraped it all out. . My deck was bent too.

    • @stevieboyo007
      @stevieboyo007 2 роки тому

      @@sonnyjs15 blades are installed correctly? Are the blades the right size? You have the right tilt on the deck?

    • @sonnyjs15
      @sonnyjs15 2 роки тому

      @@stevieboyo007 yes, yes, and no clue. I probably messed up the deck by the way I jacked it up and blocked it but it seems just fine. Right and left blades cut perfect. Middle it worse than the old blade.

  • @no_handle_required
    @no_handle_required 2 роки тому +1

    How come everybody who makes lawn videos has a weird southern accent? Doesn't anybody that speaks normal English mow their lawns?

    • @DLCShark
      @DLCShark 2 роки тому +8

      Maybe because “normal talking” people don’t have the amount of grass or don’t cut their own grass like us southerners do.

    • @johnjacobjingle7177
      @johnjacobjingle7177 Рік тому +1

      Maybe its your weird nerdy northern accent that's the problem

    • @charlesbeall2589
      @charlesbeall2589 11 місяців тому

      Spoken like a real "class" individual.....low class.🤡

    • @OscarHuluLema
      @OscarHuluLema Місяць тому

      Bless ur heart

  • @ManuelLabor142
    @ManuelLabor142 Рік тому

    These home handyman remedies are likely to kill someone. I think I’ll go to the professionals. Thanks anyway.