I bought the Rapid Turn with my Tormach 2 years ago...I'm thinking it's time to start learning how to use it. Your vids are always a good place to start!
One thing I would like to know is how to change the rough grooving cycle so it roughs side to side instead of plunging. eg: feed in on the right side of the groove, machine across to the left wall, feed in and machine back to the right wall (rinse and repeat until at depth). Is this possible in Fusion. Thanks
@@MachinedComponents Start a grooving operation. Go to the passes tab. Make sure Roughing Passes is checked. Hover your mouse over the Grooving Pattern dropdown and you will see the option you want listed there with a visual in the tooltip.
We program at the lathe control panel and when software is used, operators freak out because it looks different from what they are use to. We use canned cycles and simply edit existing programs as needed. But for more complex stuff we'd like to use software of some sort. But again it doest post to what operators are use to seeing so they freak out.
I run into this a lot. CAM software can do a lot of things that wouldn’t be done when writing code by hand, such as the lead ins and lead outs as an example. Have you tried running a part from Fusion? Did the program do what it was supposed to? You can also contact a post editor that can format the output of the code to be more what the operators expect. I know this last part seems crude, but often I tell them to hit the green button.
somewhy i dont have any affect on toolpaths by cheking on Tangential extention, it doesnt change the distanse between the part and the starting point in profile roughing and the toolpath falls down at front in the profile finishing. However, if I do same manipulations in original tutorial file, changes do affect, what may be the problem?
I think it has a lot to do with machine usage. I still see a lot of lathes being programmed by hand since profiles are generally fairly simple. I also think there are a lot more mills in the world compared to lathes. That being said, I plan to do more lathe content in the future.
Hi Brett. I decided to add something around turning. It would be nice if there were a bigger percentage of lathe to mill people but I think the ratio is pretty skewed. I'll see what ideas I can up with in the future.
Thanks for the clear tutorial! Have you had any luck getting Fusion to post your roughing as canned cycles? I can’t seem to get it to work with any of the posts that Fusion provides.
16:26 why didn't you use a derived operation so that the boring tool knew how much material remained? Perhaps you can't follow a drill with a boring tool? I'm never sure why derived is used and sometimes not. And then we have "rest machining" - how does it differ from derived?
Hi Murray. Derived means I want to make a copy of what I just did but change from one machining strategy to a different machining strategy. Rest machining looks at what stock has been removed and what stock is remaining at that point. When I cleared the bore I know the bore is 1 inch in diameter and the drill used was 61/64. So there is about .050 left or .020 left per side. So a derived operation won't know how much material remains. It only knows what selections were used in the previous operation. Hopefully that helps explain it.
@@MechanicalAdvantage Ah, so at 18:03 you selected rest machining so it knew where the drilled bore was and how much to remove, if I understand correctly. Thanks for taking the time to explain! It starts to make sense now.
Hi Murray. Not in this case. I didn't use rest machining at all because I knew that between the front bore rouging and the drilling operation there wasn't much material left anywhere in the bore of the part from front to back. So the finishing profile didn't need to worry about taking multiple passes or anything like that.
why do we need to put an offset for the inner radii. Cause don't seem to understand the purpose of it. When I tried to put a value, say -0.01. The tool couldn't do the finishing for the drilling leftovers. 18:45
Hi Nicola. Good news, this file is already accessible by you. You can find it in the CAM Samples directory and the file name is 2X Turning - Quick Release
Sorry, this was a tutorial file that I used that Autodesk created. It wasn't exactly set up to make the part easily changeable or the chuck adjustable.
Thanks Kevin!...this was a helpful overview. I'm just getting up to speed using Fusion CAM on a Trak 1630 lathe. There doesn't seem to be much out there on face profiling with the lathe in fusion. Any chance for some content that covers face profiling? Thanks for your efforts, and keep up the good work!
Are you talking about grooves on an end face? If you have a specific example, you can email me info @ mechanicaladvatnage.com (remove the spaces obviously)
You can simulate the tool paths in Fusion. When you export the code, it opens in an editor where you can view the lines of code that have been output by Fusion. That code can also be loaded into a back plotter (not included with the software) for further verification.
Good day, Is there any example of turning a casted or forged part, that is, the part is not machined out of a round billet, but from a casted or forged part. The roughing will then follow the casting profile and avoid to cut in the air. Hope I've been able to explain myself. Regards, Bruno
I don’t recall without watching the video, but probably. Not sure the reason, I think I probably assumed that people were familiar with the drilling toolpath.
Yeah missed those for sure. I was more focused on the lathe toolpaths. Are you familiar with drilling ops in Fusion? If you are, good news they work exactly the same when doing a lathe part. The post tells the live tools to fire up if the hole isn’t on the z axis. If you aren’t, let me know and I can do a follow up video.
Super helpful. Thank you for posting. Would love more Lathe videos from you!
Quite possibly the best tutorial on youtube. I dont even have a CNC lathe!
Thank you. Maybe you should consider buying a lathe 😁
I actually decided to convert my mini lathe to CNC so this video comes in useful@@MechanicalAdvantage
Please just like Steve said keep making lathe videos 100%likes.
I bought the Rapid Turn with my Tormach 2 years ago...I'm thinking it's time to start learning how to use it. Your vids are always a good place to start!
Awesome video. I learned something new with your finish bore going back to front
Excellent. That’s what I like to hear.
Great video! Thanks for posting!
what about the off center holes? can you go over how to accomplish these on a lathe with live tooling
Excellent tutorial , thanks Kevin. More turning videos please.
Hi CodeAdze. Glad you like it, let's see if I can think of some additional ideas for the future.
One thing I would like to know is how to change the rough grooving cycle so it roughs side to side instead of plunging. eg: feed in on the right side of the groove, machine across to the left wall, feed in and machine back to the right wall (rinse and repeat until at depth). Is this possible in Fusion. Thanks
@@MachinedComponents Start a grooving operation. Go to the passes tab. Make sure Roughing Passes is checked. Hover your mouse over the Grooving Pattern dropdown and you will see the option you want listed there with a visual in the tooltip.
@@MechanicalAdvantage Thanks for taking the time to teach me this, I very much appreciate it.
very good - thanks - helped on internal bore
Thanks so much
We program at the lathe control panel and when software is used, operators freak out because it looks different from what they are use to.
We use canned cycles and simply edit existing programs as needed.
But for more complex stuff we'd like to use software of some sort. But again it doest post to what operators are use to seeing so they freak out.
I run into this a lot. CAM software can do a lot of things that wouldn’t be done when writing code by hand, such as the lead ins and lead outs as an example. Have you tried running a part from Fusion? Did the program do what it was supposed to? You can also contact a post editor that can format the output of the code to be more what the operators expect. I know this last part seems crude, but often I tell them to hit the green button.
somewhy i dont have any affect on toolpaths by cheking on Tangential extention, it doesnt change the distanse between the part and the starting point in profile roughing and the toolpath falls down at front in the profile finishing. However, if I do same manipulations in original tutorial file, changes do affect, what may be the problem?
Thanks, Kevin Don't see too many lathe tutorials.
I think it has a lot to do with machine usage. I still see a lot of lathes being programmed by hand since profiles are generally fairly simple. I also think there are a lot more mills in the world compared to lathes. That being said, I plan to do more lathe content in the future.
Great video, lets keep the lathe content going, Video Idea... stock parameters, lathe templates.
Hi Brett. I decided to add something around turning. It would be nice if there were a bigger percentage of lathe to mill people but I think the ratio is pretty skewed. I'll see what ideas I can up with in the future.
How do i add champhers to a part is this done in the design phase?.
Excellent video! How about some millturn videos? Thanks!
Thanks for the clear tutorial! Have you had any luck getting Fusion to post your roughing as canned cycles? I can’t seem to get it to work with any of the posts that Fusion provides.
how did you get the chuck to show next to the model?
It was modeled as a component in the design, not a function of CAM.
Awesome Man! Keep making lathe videos!!
Hi Steve. I’m considering putting a lathe training class on the schedule. Probably two 4 hour sessions. Any interest?
Awesome video Kevin! We are close to pulling the trigger on a Haas TL2
Well look at you guys go up there! Or I guess down there? haha Let me know when you get that thing in the shop. Say hi to the wife for me.
16:26 why didn't you use a derived operation so that the boring tool knew how much material remained? Perhaps you can't follow a drill with a boring tool? I'm never sure why derived is used and sometimes not. And then we have "rest machining" - how does it differ from derived?
Hi Murray. Derived means I want to make a copy of what I just did but change from one machining strategy to a different machining strategy. Rest machining looks at what stock has been removed and what stock is remaining at that point. When I cleared the bore I know the bore is 1 inch in diameter and the drill used was 61/64. So there is about .050 left or .020 left per side. So a derived operation won't know how much material remains. It only knows what selections were used in the previous operation. Hopefully that helps explain it.
@@MechanicalAdvantage Ah, so at 18:03 you selected rest machining so it knew where the drilled bore was and how much to remove, if I understand correctly.
Thanks for taking the time to explain! It starts to make sense now.
Hi Murray. Not in this case. I didn't use rest machining at all because I knew that between the front bore rouging and the drilling operation there wasn't much material left anywhere in the bore of the part from front to back. So the finishing profile didn't need to worry about taking multiple passes or anything like that.
can i know what post did u use for nc code?
why do we need to put an offset for the inner radii. Cause don't seem to understand the purpose of it. When I tried to put a value, say -0.01. The tool couldn't do the finishing for the drilling leftovers. 18:45
by putting offset -0.05, isnt that the part model id will be smaller of 0.05?
I can’t get my boring operation to post a canned cycle, even with it being selected. OD roughing posts canned cycle just fine.
I learned so much from this video, Thank you
Thank you so much for making this video
Very good Kevin this will help me out to star making programs on fusion Lathe and stop using bob cad software.
Hi Jamie. Any interest in a lathe class if I put one on the schedule? I’m thinking it would be two 4 hour sessions.
Excellent video; thank you! I was rather hoping we’d get to see the part cut for real at the end!!!👍😁
Is it possible for you to share that component so I can use it for teaching so students can see the chuck fro better understanding.
Hi Nicola. Good news, this file is already accessible by you. You can find it in the CAM Samples directory and the file name is 2X Turning - Quick Release
How do I change out the part in chuck with my part?
Sorry, this was a tutorial file that I used that Autodesk created. It wasn't exactly set up to make the part easily changeable or the chuck adjustable.
Great video!
Thank you!
Thanks Kevin!...this was a helpful overview. I'm just getting up to speed using Fusion CAM on a Trak 1630 lathe. There doesn't seem to be much out there on face profiling with the lathe in fusion. Any chance for some content that covers face profiling? Thanks for your efforts, and keep up the good work!
Are you talking about grooves on an end face? If you have a specific example, you can email me info @ mechanicaladvatnage.com (remove the spaces obviously)
Would you be able to get the CAM code which would be sent to the CNC?
Yep. The g-code is created by Fusion using a post processor to output the code in the format a machine requires.
@@MechanicalAdvantage are you able to view this in fusion 360?
You can simulate the tool paths in Fusion. When you export the code, it opens in an editor where you can view the lines of code that have been output by Fusion. That code can also be loaded into a back plotter (not included with the software) for further verification.
Fantastic video thankyou!
Hi Sean. Thank you! Hopefully you found it helpful.
Is this video available in other languages? Like Spanish?
I’m sorry, but not. Can UA-cam real time caption it in Spanish?
Good day,
Is there any example of turning a casted or forged part, that is, the part is not machined out of a round billet, but from a casted or forged part. The roughing will then follow the casting profile and avoid to cut in the air. Hope I've been able to explain myself. Regards, Bruno
Thanks for the video!
Hi Bruno. Hopefully it got you started. Thanks for the comment.
What I love fusion for is its repeatability)
Thanks for sharing!
Hi Craig. Hopefully you picked something up.
Klasse! THX
Didnt we miss some drilling here?
I don’t recall without watching the video, but probably. Not sure the reason, I think I probably assumed that people were familiar with the drilling toolpath.
@@MechanicalAdvantage Looks like some radial holes around one of the thin walls. Great vid though!
Yeah missed those for sure. I was more focused on the lathe toolpaths. Are you familiar with drilling ops in Fusion? If you are, good news they work exactly the same when doing a lathe part. The post tells the live tools to fire up if the hole isn’t on the z axis. If you aren’t, let me know and I can do a follow up video.
@@MechanicalAdvantage I can program them longhand but not familiar in Fusion. Would love a video.
i want to create a setup and having issues in setting up the axis X& Z
can you help me out?