Thanks for posting this. I was just looking at commercial coping jigs and thinking that I could probably make one. Now you've saved me the effort of thinking about how to do that. LOL. There are so many commercial products that can be replicated so simply. And I'm a fan of both simple and cheap.
ok the bed of the sled is 3/8 thick 8 by 16 the toggle block is 1 inch thick 7 long 2 width and the lock down plate with handle is 6,5 long 4 inchs width 3/4 plywood
I like this idea, simple with less to throw off the 90 degree setting. One question: do you find the 1/4" base rigid enough to remain flat on the table when under the toggle clamp pressure? Thanks.
hello thanks yes it stays flat 100 percent with the toggle pressure ive had no issues and you dont need alot off pressure with the toggle it has a good hold down with decent pressure
![[Gifted] A Router Table Coping Sled With A Couple Of Great Features!](http://i.ytimg.com/vi/2JTUVt8ipY8/mqdefault.jpg)
I've looked at several videos with different designs for this, but yours is definitely the best! You just saved me about $100. Thanks!
@@MileyonDisney your welcome
Thanks for posting this. I was just looking at commercial coping jigs and thinking that I could probably make one. Now you've saved me the effort of thinking about how to do that. LOL.
There are so many commercial products that can be replicated so simply. And I'm a fan of both simple and cheap.
your welcome
Used your ideas to make one similar, thanks, it works great
thank you
great can't wait to make one thanks much hope to see more like this.
thank you
Thank you, I was looking for a simple design. I built mine yesterday and it works great
@@AlansMovies1 thank you
I really like your coping sled. Can you give us list of materials you used. Size and thickness.
hello thank you yes when i get into the shop tomorrow i i will shoot you a list and size
ok the bed of the sled is 3/8 thick 8 by 16 the toggle block is 1 inch thick 7 long 2 width and the lock down plate with handle is 6,5 long 4 inchs width 3/4 plywood
@@ltscustomwoodworks4052 Thanks for the update
Just what I was looking for, thank you!
your welcome
Good jig..new sub.
@@myhoneyshandmade1077 thank you
I like this idea, simple with less to throw off the 90 degree setting. One question: do you find the 1/4" base rigid enough to remain flat on the table when under the toggle clamp pressure? Thanks.
hello thanks yes it stays flat 100 percent with the toggle pressure ive had no issues and you dont need alot off pressure with the toggle it has a good hold down with decent pressure
@@ltscustomwoodworks4052 Thanks for letting me know. Have a good day.
Ah the beauty of the KISS - keep it simple stupid LOL I like the simplicity.
thank you
Really good idea for cutting the base you way did
Thank you
Nice simple sled.
thank you