I could be wrong here but if your T2500 is anything like my P1000, the bass knob controls the punch eq, which is bass boost, and that would 100% cause you to clip your sub to death. What I use is an RCA bass knob. I’m pretty sure that T2 can take 2500w rms no problem. I have 2 P3s each on their own P1000 and they take it full tilt all day everyday.
You can look at the coil and see that clipping was not the cause of the subwoofers demise. The voice coil was mechanically rubbing which caused a short circuit. As far as bass boost, Punch EQ, gain control or rca bass knob, they can all cause clipping if not adjusted properly.
Looks like to me the subwoofer was not blown due to clipping, looks like the owner had been rough with it and the coil got damaged then eventually tore it self apart while playing
1 ohm is too much power to that sub from that amp. Should have bought the 2 ohm svc instead of the 1 ohm svc. 2 ohms from that amp is around 2900 watts. I ohm from that amp is well over 3500. The rms for that sub is 2000. How’s it going now though?
With proper tuning you can play it as long as you want. This was clipped to high heaven. This can be from playing poor recorded tracks too loud or improper gain settings. These woofers don’t need to be cooled if the pole piece and cooling vents are allowed to do their jobs and not living outside the gap too long (clipping).
So the other video was you thinking rattles were cool. Now you are clipping the hell out of your amp. Dude learn more about this hobby. Lots of fun but dont be that guy
Everyone recommending other subs.. I have a 15yr old t1 15 I listen to daily... he was clipping .. had to be.. simply overpowering it he would have pulled a lead or something.. but that coil was clipped. A scar or sundown or whatever else you wanna suggest will do the same.. and btw I wouldn't recommend 3800w on a scar 😉
@@treysempire3008 look into your head unit my dude.. I was using a old pioneer and was having to turn my orion 2500dz gain up so high I was clipping some.. after getting a certified 4v preout head unit i can lower my gains and get better cleaner sound.. and be aware just because a deck says it's 2v doesn't mean that's true before clipping
Clipped power looking at how the coil basically blew a hole in itself. I’ve got 10KW on my T2 16s and they’ve been going strong for the past 3 years now. Tougher to hear clipping though if it’s in a trunk.
Look again. Clipped related failures are basically the coil getting too hot. This can cause the epoxy to come loose and the coil to unwind. What we have here is a mechanical rubbing which rubbed through the insulation on the wire and caused a short circuit.
Even though this fella sounds kind of rude, he is correct in that I'm not seeing how your pressure waves are going from the trunk into the cabin interior. Whenever you have trunk flex, that's sucking up your pressure. If you want to hear all of that face in the best option is to fire the sub and the port into the vehicle and seal off the trunk.
get a sundown!!! Got my accord like urs slappin bro .. 1 full throttle in the back and 1 Xs under the hood and my car loves it! Beside everything falling apart 😂😂
Perhaps it could have been repaired, but Rockford was sending him a brand new replacement under warranty and he was required to destroy the old subwoofer.
Several people are saying that even though you cut out all the soft parts, it can still be reconed for about $200 in parts. That might be something to look into.
@@DesertRunner602 $999 now. And the 16" is $1200 But your paying for the "bespoke" design and engineering. But for that size it takes 4000w and is a beast! If you have the money and want a sub that is top tier build quality rockford has some awesome quality. Very tight and clean sounding subs.
Sadly if you were local I would've bought that sub from you before you cut it up, could've been rebuilt if the surround and cone weren't damaged.. Sad really
@@treysempire3008 can you message me on Facebook? Or let me known where you prefer. It's a dumb project, but I want to basically glue the cap and whatever i can salvage to a p3sd4-8 to make it match my t2s1-16 and t1s1-12
U have to use a 15 tall surround and trim. Will work perfect. Also RA Audio makes a drop in recone for the t213. Pretty sure that's what he used on the drop in he makes.
Firstly, the coil was mechanically rubbing and shorted. It had nothing to do with the gain. Second, the adjustment of the gain is determined by your input voltage. If your input voltage is really low then you need to increase the gain. If your input voltage is really high you turn the gain down. There are certain situations where it's appropriate to have the gain turned all the way up.
Spiders didn't need to be cut they are mounted by screws. You could just unscrew them.
Them slides look like the voice coil 🤣🤣
I felt like I just had open heart surgery without any anaesthesia
I could be wrong here but if your T2500 is anything like my P1000, the bass knob controls the punch eq, which is bass boost, and that would 100% cause you to clip your sub to death. What I use is an RCA bass knob.
I’m pretty sure that T2 can take 2500w rms no problem. I have 2 P3s each on their own P1000 and they take it full tilt all day everyday.
You can look at the coil and see that clipping was not the cause of the subwoofers demise. The voice coil was mechanically rubbing which caused a short circuit.
As far as bass boost, Punch EQ, gain control or rca bass knob, they can all cause clipping if not adjusted properly.
was u using a Brazilian Amp ? That coil is crazy looking 🔥 it would be a easy recone tho fr
My heart just said....noooooooooooooo! LOL! If ya rebuilding it, it's cool! LOL
Looks like to me the subwoofer was not blown due to clipping, looks like the owner had been rough with it and the coil got damaged then eventually tore it self apart while playing
Definitely see the build quality of these subwoofers the way you were grabbing that cone to cut the spiders. Always a big fan of rockford fosgate
I like this sub cool. Great job
thats a clippin burn. and that 2500 amp puts out way more than 2500rms on dynos.
Yeah I know
Es muy fuerte ese amplificador por eso se quemo?
@@user-yp7fb8vk2mya van varias que se queman !! No se si sea clipping o sea el peso de la bobina
No, no. Look again, thats not an over heated coil. That's mechanical damage. It caused a short in the coil.
Yeah bro tear it down an video. The rebuild cool stuff.
1 ohm is too much power to that sub from that amp. Should have bought the 2 ohm svc instead of the 1 ohm svc. 2 ohms from that amp is around 2900 watts. I ohm from that amp is well over 3500. The rms for that sub is 2000. How’s it going now though?
That thing was rubbing like crazy
Yeah I can’t wait to show you all the install in the truck when I’m done
Keep pushing 💪 im proud of you 👏
This reminds me of when I use to have the pioneer champion series 3500.
Ra audio makes a recone for this sub.
I have 2of them in my car running off a sundown salt 4k.
That’s why on long road trips I’ll shut it down after so long to let everything cool down especially during the summer
With proper tuning you can play it as long as you want. This was clipped to high heaven. This can be from playing poor recorded tracks too loud or improper gain settings. These woofers don’t need to be cooled if the pole piece and cooling vents are allowed to do their jobs and not living outside the gap too long (clipping).
@@PhiMobileSoundsNope, defect in the sub. It was mechanically rubbing. It shows no sign of overheating or clipping.
So the other video was you thinking rattles were cool. Now you are clipping the hell out of your amp. Dude learn more about this hobby. Lots of fun but dont be that guy
Are you just assuming that he's clipping his output? What are you basing this on?
Everyone recommending other subs.. I have a 15yr old t1 15 I listen to daily... he was clipping .. had to be.. simply overpowering it he would have pulled a lead or something.. but that coil was clipped. A scar or sundown or whatever else you wanna suggest will do the same.. and btw I wouldn't recommend 3800w on a scar 😉
Glad someone knows
@@treysempire3008 nothing wrong with that happens man.. you have a great sub.. and possibly one of the greatest amps made.. Bass on my guy👍
@@treysempire3008 look into your head unit my dude.. I was using a old pioneer and was having to turn my orion 2500dz gain up so high I was clipping some.. after getting a certified 4v preout head unit i can lower my gains and get better cleaner sound.. and be aware just because a deck says it's 2v doesn't mean that's true before clipping
Were can I get the 13 inch surrounds from anybody ??? Sumone
@@jeffreyrodriguez6265 try robot underground.. he has a channel and can probably locate one..
Do a giveaway on it bro a lot of people would love to have it still
Them slides are fried 😂
Clipped power looking at how the coil basically blew a hole in itself. I’ve got 10KW on my T2 16s and they’ve been going strong for the past 3 years now. Tougher to hear clipping though if it’s in a trunk.
Yep I’m overpowering my sub but 2k watts rms. No problems because it’s clean power and not clipped 😊
Look again. Clipped related failures are basically the coil getting too hot. This can cause the epoxy to come loose and the coil to unwind.
What we have here is a mechanical rubbing which rubbed through the insulation on the wire and caused a short circuit.
How does bass enter the vehicle while being all walled off like that? No wonder you cats are blowing up all your equipment. Poor system design
Oh
Even though this fella sounds kind of rude, he is correct in that I'm not seeing how your pressure waves are going from the trunk into the cabin interior. Whenever you have trunk flex, that's sucking up your pressure. If you want to hear all of that face in the best option is to fire the sub and the port into the vehicle and seal off the trunk.
get a sundown!!! Got my accord like urs slappin bro .. 1 full throttle in the back and 1 Xs under the hood and my car loves it! Beside everything falling apart 😂😂
Yeah I love mines lol
Could have repaired that brah $200 I’ve repaired my t2 twice already but each time couple years worth
Perhaps it could have been repaired, but Rockford was sending him a brand new replacement under warranty and he was required to destroy the old subwoofer.
Seal sub Box or Port sub Box?
Ported
Get a dd1 plus... set it at 8db overlap with bass knob all the way up.... that's 💰... slap all day everyday
Can You Show Us Your Amp Setting You Have It On?
That's exactly wat I have now I have to do the same thing and destroy it and send pictures to get my new 1 by warranty
Yeah people thinking I’m destroying it to just destroy it lol
Several people are saying that even though you cut out all the soft parts, it can still be reconed for about $200 in parts. That might be something to look into.
I Think That Amp Is Too Much For That Speaker
Nope, its a good match. The sub was defective.
Strengthen the coil and position the support piece.
For 1400 dollars it better have a gold voice coil
Full Copper is gold these days.
For 1400 it better come with an amp that matches the RMS of this sub
@@DesertRunner602 $999 now. And the 16" is $1200 But your paying for the "bespoke" design and engineering. But for that size it takes 4000w and is a beast! If you have the money and want a sub that is top tier build quality rockford has some awesome quality. Very tight and clean sounding subs.
It got clipped. Need better electrical. Battery can’t handle all the power it pulls. I’ll buy that blown sub tho
No, everything you said is wrong. The coil was mechanically rubbing and it shorted out. That's all. It didn't clip and his electrical is fine.
You clipping big time not a subwoofer issue
Speaker could have been fixed
Sadly if you were local I would've bought that sub from you before you cut it up, could've been rebuilt if the surround and cone weren't damaged..
Sad really
I have to cut it open to get the warranty replacement
Can it be rebuild
If you know what you doing I believe som
Isn't the t2500 3300rms?
Mines rated 3786
@@treysempire3008 damn that's a beast! Mines like 3400 are you dyno tuning the amp down to 2000 rms? Or just sending it?
@@treysempire3008 you still have the cone to this? If so I will pay shipping I want for a weird project
@@dominicdymond yes I have
@@treysempire3008 can you message me on Facebook? Or let me known where you prefer. It's a dumb project, but I want to basically glue the cap and whatever i can salvage to a p3sd4-8 to make it match my t2s1-16 and t1s1-12
That’s not a SPL sub it’s a sql sub. You can’t run it over 2k and expect it too last. Your better off with a Spl sub that designed for abuse.
I have a T2500 Amp and the same sub 2ohm. I’m ruining it in a 3.7 ported box. I won’t push it past 1800rms, I use it for Loud sound quality.
How much does the sub weigh?
98lbs
Were can I get the 13 inch surrounds from ? Sumbody need help??
I’m looking for the surround myself
U have to use a 15 tall surround and trim. Will work perfect. Also RA Audio makes a drop in recone for the t213. Pretty sure that's what he used on the drop in he makes.
ua-cam.com/video/1o1USjaJSTQ/v-deo.html
@@millsjames319ua-cam.com/video/1o1USjaJSTQ/v-deo.html
ua-cam.com/video/1o1USjaJSTQ/v-deo.html
You have to cut the dust cap shiiit
You can rebuild em
Gain on the amp wasn’t set right. Never turn gain more than halfway!
IndyAmpRepair
Firstly, the coil was mechanically rubbing and shorted.
It had nothing to do with the gain.
Second, the adjustment of the gain is determined by your input voltage. If your input voltage is really low then you need to increase the gain. If your input voltage is really high you turn the gain down.
There are certain situations where it's appropriate to have the gain turned all the way up.
@@JasonWW2000cool story bruh!
@@IndyAmpRepair I'm just trying to spread factual information. 👍
Looks like coil rub caused a short
Yes, exactly.
Rebuild it bro
How you blow That beast
The sub had an issue. It was mechanically rubbing and it caused the voice coil to short out.
Not many 2500watt subs less than 15in have an FS of 23hz
I’ll buy it
Ouch
I want the Motor!!!
Clip city
I did it for video purpose
My first thought.. he was clipping it..
@@treysempire3008 Do you still have it?
@@K-Effect yes
@@treysempire3008 Would you be interested in selling it?
Q menso lo hubieras reparado x lo que costó 😂 yo si lo reparo
Ganti pakai punyanya psi
It’s okay bro go get Skar Audio they are strong
No the fuck they aren’t. Fuck skar audio they’re called skarbage for a reason.
Skar audio sucks cheap over glorified garbage
That brand is quite inferior to what he has. One does not choose to go from a Cadillac to a Pinto.