Yup!!! I use 6 subs in my downstairs,, plus buttkickers! With a Anthem Avm90 great arc calibration. And 4 for now in my upstairs theatre. All my other ones have 2 subs(7 systems) you never can have enough bass!
I really agree with your tip about room calibration. I have an older amp (pre auto correction with mic). I had always set it by ear. When my good amp died on me during a house move, I went and bought a cheap Pioneer ($500.00 and 80 watts/ch - compared to 160 watts/ch) to use until I got mine repaired. It came with the mic, etc. Once I ran it (the room correction) it was like a whole new world opened up!! I had it set all wrong for so long! Since my move (into a much smaller room where I couldn't even use the big amp), I am still using the Pioneer! I'm a perfect example of what you said! BUT - I did learn! Keep up the great videos!!
Thanks, sorry for the (slightly) late reply! 😂 I am trying out a $400 Denon. Honestly, for what you get, it's not bad at all. Room correction isn't quite as stellar as XT32, but what's funny is I think they purposely degraded the interface/on screen menu, so that the higher end user interface looks really nice by comparison. Is it truly a cost saving measure to have a cheap looking menu, while the adjustments are pretty much the same? 🙃 Thank you for watching, and I'm really sorry for missing your comment!
Another big mistake that almost everyone makes is placing their subwoofers on the ground. They should be on a heavy stand or at the least elevated by 12" off the floor. If you can put it at ear level off the ground on a heavy stand this is ideal. It will 100% sound better. Subwoofers should be elevated and almost no one knows this. It makes a big difference in bass quality. Maybe not practical for everyone but well worth doing.
No this is wrong. Puting on stand make bass directional. We don't whant that. Shoud be on the floor. No wave cancellation on the floor and front speakers
I have a few suggestions for you. First, you are most likely missing a lot of your mid tones using such small bookshelf speakers are your main front sound stage. there will be a huge middle ground that is missing between those and your subs. second, you should, if you are really into sound, consider a separate actual amplifier for you main speakers at the very least. no receiver can provide the head room you'll need for dynamic music and movies. the power just isn't there so your speakers will distort badly at louder volumes. next, your subs, although beautiful, are not matched to the rest of your system. they will drown out the rest of the music unless you do the first things i suggested which is a larger front sound stage and more power behind them. also, i would NOT ever recommend someone set their crossover at 90hz. 80hz is the THX standard for a good reason. i don't think you're explaining things as simplified as they need to be for newbies. break it down and explain things to people assuming they know nothing, which in the case of this video, seems to be what you're striving for as an intended audience. next, the location and i understand it's due to this not being in a dedicated theater, is wrong for your Atmos speakers. they should be in the middle of the room and not int he front height position particularly if you're not attempting to "bounce" the sound off the ceiling to your seating position. just saying. you'd notice a huge improvement if your speakers were actually located where they are supposed to be, which is in the ceiling. next, for proper subwoofer response you should at least touch on the "room crawl" test to explain how to avoid bass dead zones. i'm the kinda guy that likes things balanced looking in my house too, but having your subs placed directly next to your image doesn't necessarily represent the correct placement for the subwoofer. in fact, often the subs should be counter corner to each other at least...which isn't visually as impressive as having them up front and center, but will give better bass response in your room which in the end is the actual goal. i enjoyed your video, and we can attribute this to your coffee if you'd like, but i feel you need to simplify the explainations and then go into much more detail about placement which is one fo the most important things about bass, room correction and sound deadening/bass traps/echo cancellations etc. good video, keep it up...and hopefully you'll make another one giving better information next time. you really should try some larger front speakers (still set to small of course which was 100% correct as that automatically makes the crossover set to 80hz) and a separate amplifier to provide the headroom needed when listening to movies at even close to reference volumes. i'll go watch some of your other videos now. i hope this is taken in a positive and helpful critique type of way and not just criticism which it isn't meant to be.
Jinx Canada ps. I have a KEF 2000 series 5.1 which includes a KEF Kube-2 (has a speaker in each side of sub). Can I place my Subwoofer behind the TV on a corner TV cabinet? To keep it hidden. ?
I'm a huge Kef fan. I think It would be hard for someone to give advice without knowing more about the room you are speaking of (room dimensions, seating and so forth).@@GR8UKGB
Im not an expert but you really have to consider what type of front L/R mains your running with your subwoofers when crossing over. I feel like you can crossover your subwoofers much lower (down to 80hz ) if you have good towers that can efficiently handle lower frequencies (my L/R mains are set at 60hz). In this case, you'll have a better sounding/more dynamic "front stage" where the low frequencies are smoothly transitioning from your towers to your subs . Someone correct me if you think my logic is off.
Your AVR crossover is a hard limit for the subwoofer, and a soft limit for the towers. If you set your tower speakers to Large, listen to a sweep that goes all the way down to 20 hertz, you'll see what your towers are capable of. Then set them to small, and 90 to 120 hertz. Then, turn off your subwoofer, and listen to the same sweep. Your towers will still go down just as low as before, it just won't be as powerful. Your AVR will not be straining as hard, yet you will get the benefit of the towers' depth. If you have matching dual subwoofers from my list, (deep bass subwoofers) with very few exceptions, the subwoofers are always going to be better under 90 hertz, so long as they are adjusted correctly. See my Bass Hack video series for that. A lot of people feel as though they are "taking away" from their towers by using a higher crossover. To me, it's more about what you're taking away from the subwoofer. It's a sharp roll off for the subwoofer, and a more gradual roll off for the speakers. Definitely experiment, and see what works for you.
Very good tips. I would add another one. If you have two or more subwoofers, you should use MSO (multi subwoofer optimizer) +REW+minidsp HD. It finds the perfect EQ and deley for your subs for having the most flat (or other target curve) that you want to get.
Thank you for the info. I got a dcm tb1212, 130w powered sub (dual subs, one passive) at auction for 40 bucks last week. Along with a yamaha HTR-5590 6.1 natural sound av receiver for 20 bucks (with remote!!!) Not the newest receiver, but still sounds great...even with bose 201 series iv, and acoustimass speakers. They will definitely be getting upgraded...soon.
There's a lot of debate about towers vs bookshelf and we are looking for speakers that are not going to be overly large and dominate the aesthetics of the room. The wall that houses our TV is about 86 inches wide near a hallway that cuts through the house. It's about 16 feet from that wall to the back wall. The room is about double that in width with vaulted ceilings. The vaulted ceilings are lined with wood. So would like to avoid drilling into that if possible and wall mount like you. Current system is Denon AVR-1804 with Bose Acustimass 10, (5.1 setup with floor stands) with an LG 65" C8 OLED. The sound is archaic and needs a major overhaul, but it's still better than a soundbar and TV speakers. My initial thought was to do a Denon X3400h and some Klipsch RP160m bookshelf speakers with an accompanying center and sub. Start with a 5.1.4 setup for Dolby Atmos and go from there. Budget is a factor and looking around for used AV equipment but what is the best bang for the buck speaker system for this kind of setup of not mixing and matching brands?
Having issues with my Marantz sr6010 and stumbled across your page. Delighted to see the subs in the picture. When I put my system together two years ago I went with two svs pb2000 after countless hours of consideration. If anyone out there is on the fence about them... Don't be, they're remarkable.
While i don't completely agree with everything said here from my experience(multiple subs and placements, and also hard bare floors making a difference vs carpet for bass response- mid to high freq bleedthrough or reflections may be another issue though - as bass waves don't even see carpet, due to long wave lengths, etc) , but i definitely agree with his higher up crossover settings for passive typical speakers in a system. (However speakers, sub, and seating locations MUST be setup in correct POSITIONING in the rooms bass response for acoustical considerations, or setting points WILL PRESENT LIMITATIONS AND ISSUES! )appreciate the input here! I concur that there's surely lots of new settings these newer Atmos capable receivers are including- bluray players as well- that require addressing, and adjusting correctly. Like anything else, , to get the most out of your setup, yes, you or someone is going to need to adress the settings and probably compare results. And, yes, the more you're familiar, the quicker these setup processes can be. Bottom line, im now going to look specifically for these recommended settings, and address them. I do think ill also definitely compare any relative gain settings on the source and receiver outputs for the sub woofer out vs the gain setting on your subwoofer(s)! Honestly, as an experienced AV guy myself, id conceded that i personally only casually ever considered this point! Here this reviewer is recommending that bass is better and more dynamic by setting the gain level from your receiver menu LOWER and conversely adjusting up with your powered sub volume control level instead, in relation Now THAT may indeed be worth addressing comparing, for sure! I don't hate it! I personally never spent much time considering this point, so that's helpful indeed. Thank you. I personally typically just set sub gain on the sub itself at 12 oclock,(middle) , and then just adjust for proper levels on the receivers gain level adjust, but listen and measure regardless. But i now definitely will spend more time comparing on this issue!! APPRECIATE the thought and input, for totes!! Learn something new every day.
Do you have a video for SVS subwoofer setup for a large room? I have a 8000 cubic foot plus room (open floor plan house), just ordered a PB 2000 and a SB 2000. Want to make the best of it
I normally find your videos very informative and entertaining. However I am confused by your comment that bare floors are not the best thing for acoustic results.Yet one of your lovely dogs is called Bear! Does this mean you have to take the poor soul out of the room when it is movie time? Ans as for Angel, who takes centre stage on this video, due to his position between the subwoofers and the noise dogs make when they bark, does this make him the ultimate sub subwoofer? Just kidding, I love what you are doing. Rock on.
+Paul Upton I'll tell you that while the PB-16's have frightened me on several occasions, nothing has caused the cardiac stress that Bear has induced! He likes to go off full tilt, no warning whatsoever, and he's done it right behind my chair. Middle of the night is fun too. The dogs don't like sealed subs or the saxaphone, but they will put their heads right next to the subs. I don't like to make my ears bleed. Very comfortable overall.
I totally love your channel and the videos you make. However, contrary to conventional practise, after a lot of trial & error, setting my front towers to Full Band totally takes them to another level. I have tried setting them small with different crossovers from 60 to 90hz, but running them LARGE is just another experience. I do know all experts would disagree but I guess it's what sounds better.
I agree with you fully, old school denon 3803. Mission front towers. mission centre and rears All speakers small . LFE only crossover 80 . REL q200e subwoofer mode 2 bypassing it's internal crossover, let the amp deal with the crossover still sounds good for a 5.1 setup .
Great video! Very informative. I'm a noob in the Home Theater department, so I can use all the help I can. I'm running 4 q100's as my mains and a Mythos 7 as my Center with an Emotiva basx s12 sub (AVR X4400H). I am not sure that my setup is up to par because I can barely here my ceiling (Atmos) speakers when playing Atmos enabled shows/movies. Should I factory reset my system and run the manual setup instead of the auto setup? In step 4: What distance from the sub? I have one sub only.
Great information. I run matching SW. Now that my old AVR died, I'm looking for an upgrade. One thing I found out, is to find the specs on AVRs with dual SW output. Some AVRs just split the SW signa, meaning manual balancing. Some auto calibrate both SW channels.
I'd look for Denon X3400 or better. The room correction is pretty darn good. I have a few good ones listed on my Amazon page, and if you buy from that page it helps support the channel. The 4300 is pretty reasonable right now, and it's a pretty solid AVR. www.amazon.com/shop/subwoofer101 Some people have reported better results from using an RCA splitter on AVR's with dual outputs, so they are using it as a single subwoofer output AVR. For sure, you want the AVR to sample both subs at the same time. I would avoid an AVR that didn't sample both subs together, or use an RCA splitter if that's the case. On the Denon X6200 I use both outputs with no problem, but my old X2000 I just use a splitter, which is totally fine. The X6200 has better room correction, which is worth the upgrade IMO. I believe XT starts with the 3000 series.
Subwoofer 101 thank you. 3400 is on my shortlist. Old AVR was Yamaha RX-450. Had to use sound meter for level settings, so I'm used to manual balancing. I've also got JAMO 4 ohm speakers, still deciding whether to move to 8ohms. Can't find good information on sound quality. 8ohm@0.09%THD vs 4ohm@10%THD(model dependent). vs available power. I'm thinking, since these days I listen at lower sound levels, 8ohm may be a cleaner sound. Still deciding on speaker choice.
no judgement here, but thank you for being geeked up because I don't believe you would have broke this down and gave me as much info as I needed. Wasn't that coffee from South Park, was it? Very informing, thanks
This is pretty good, I like to think of sound like light. Speakers are like flashlights , they reflect off surfaces, can be pointed, can be too intense when facing at it directly, etc. Glares... have you all heard of light pollution?
You're lucky, you can quit coffee. Try hooking up systems with a Parkinson's type tremor. Well it certainly is challenging. Thanks for the great information and suggestions for improvement. I have always felt that the purpose of such immersive technology was to give the audience the sense of inclusion in the story. Whether it's riding in Maria's poor iMini with Jason Bourne in Paris, running through The Nostromo with Ripley while hearing Mother continue her relentless countdown, or hearing the quiet menace in the words "I'm sorry Dave, I'm afraid I can't do that." That has been my goal when establishing my system. i've been very fortunate in the fact that i've been relatively unable to acquire the type of components I would wish to include. This gives me the drive to improve my acquisition incentive. I leave you with these immortal words "Soylent green is people!"
Hahaha the Sony BR Player tricked me too. It has very silly setup. Especially because that menupoint is set "auto" by defult and I thought he would know the capabilities of the Deonon AVR no worries. Haha, not at all. Had to set manual and check all the options and then worked, at last. But I used only 2 weeks in "always in Dolby Digital" mode, then figured out. The difference between Atmos 7.1 and the old DD 5.1 is HUGE indeed.
Nice video, was very helpful. I recently purchased a setup in the last two months that I'm really happy with overall, however I feel that I can be getting more out of it. I purchased the Denon AVR 2400X receiver two Definitive BP6 Towers (which I had set on "large" and switched to small after your video, thank you by the way) two Definitive SM45 bookshelfs, and two Klipsch R-15M bookshelfs on stands in the back. My question is regarding the subs, I noticed in your video you mentioned not having matching subs can cause issues. The first sub I purchased is the Klipsch R-110SW which is fantastic, and I added a Klipsch R-12SW. Strangely enough, the 10 inch sub is actually heavier than the 12 inch sub. Anyway, I have the 10inch directly behind my sectional where the couch turns (I purchased a 25 ft subwoofer cable) and the 12 inch sub up front. The first question I have is, for some reason on the Denon receiver setup, it only is registering ONE subwoofer, not both. However, both subs are working. The other question I have is do you think both of those are good subwoofers, and is the configuration correct (one up front and one behind the sectional.) Thanks for your help, I like your videos!
+Jon Schacht I think you have to select the number of subwoofers in the speaker configuration menu. Driver size is funny. The PB-1000's hit much deeper than many 15's, but they are pretty unique in that way. Dual subs that don't match are usually better than a single, but not quite as refined as matched duals. Placement is more flexible with duals compared to a single. Your placement is ok, but you can always experiment. All rooms are unique. I could have a more optimized setup, but it works for the layout. I have a very narrow view of what a good subwoofer is. I have a list of subwoofers that I would spend my own money on. Most subs are too shallow, and like 95% of subs out there, the Klipsch suffer from the same problem, not much happening under 30 hertz. The subs on "The List" are a dramatic departure: www.subwoofer101.com/best-subwoofers/
Thanks for the reply. Can you please explain the difference between the hertz setup on the receiver and the knob on the back of the subwoofer? I'm not exactly sure how to do the setup from the Denon and how that should be matched up with the knob on the back of the Sub. I appreciate your help!
I usually disable the crossover on the sub, which filters off all frequencies above the setting. So setting the crossover to 80 hertz would filter off the frequencies above 80 hertz. If you set your crossover on the AVR at 90, you'd have a hole between 80 and 90 hertz. I let the AVR handle that, and turn the subwoofer crossover up to its maximum value (like 200 hertz or whatever the maximum is) and just rely on the AVR. Turning it to it's maximum value is basically disabling it. The crossover on the back of the sub can be used to tune out some unwanted response, but it starts to get a little tricky. I find it much easier to use the AVR. This goes into more detail about crossovers on the AVR and how it all comes together. www.subwoofer101.com/setting-up-your-gear/large-vs-small-lfe-main-double-bass-etc/
If you don't shoot straight, your audience will figure it out. Tube Buddy is a pretty useful tool. Here's my affiliate link: www.tubebuddy.com/subwoofer101 They have a free option, but I've been on a paid plan for a while now, and it's been very helpful. The thumbnail generator alone is worth it, and that comes with the free version. I don't know how you plan to shoot, but I do all of my shooting with my smart phone, and Kinemaster is an awesome editing app. Render time on my Pixel is pretty much minute for minute in 4K. So a 15 minute 4K video takes about 15-20 minutes to render. MUCH quicker than trying to use my laptop. Good luck!
This may be a silly question - but - have to ask! I have a great older 5.1 AVR without room correction. When I moved and hooked it up it didn't work so had to have it repaired. While it was away I bought a little Pioneer ($400.). It had room setup and I was BLOWN away with the sound! I had it all wrong (by ear)! My question is - If I hook up my old AVR (4X's the power of the Pioneer), will the correction be the same? Or would I have to buy a separate unit to do the room corrections again?
I hope this isn’t a dumb question. Probably is but I’ve tried things and it doesn’t work. How do I get room decor ( pictures in frames or other things on walls ) windows etc. from rattling or making noise from the bass. ( subwoofer )
Not a dumb question at all!! Rattles are a real problem, and resolving them is worthwhile. Honestly, my solution is crazy low tech. Tissue. Kleenex, TP, paper towel, whatever works. So long as it's hidden and stays put, as long as it doesn't rattle, you're good. You can also use neoprene, like a mousepad, or even a cut up yoga mat. For things that are more visible, you need to get a little more creative, but you get the idea. Use a little tissue first to see if it resolves the rattle, and if so, but it's visible, figure out what to do from there. Maybe a clear stick-on footpad, whatever works that doesn't stand out. Questions are always welcome on my channel. At one point in time, I didn't know ANYTHING about audio. True for every single person in the hobby. Some "experts" forget that.
Good video the dog blends in nice to . As for me your tips came across me pretty good . My two subs are in the corner of my condo apartment . When I walk around the best bass response for me is those corners . I can see yours is in the front . As for floor yes carpet makes a difference. It does take away the brightness that’s annoying . My amplification is Parasound I have two for bi amping my floor stands. Denon is my AVR x7200WA model. Love those pre outs ! Gives a good option to link to other amps when needed . As for height setup I have AURO 3D 9 to 10.1 that layout seems to blend better in my condo setting. Atmos Two on ceiling . Not enough depth to add another pair . So it’s 5.2.2 for now until my wife and I move in a house soon.
Sounds like a great setup. I hear you on limitations, I'm building an Atmos set up in the RV project, and 6.2.2 seems to be the way to go. 6.2.4 wouldn't have enough separation from the front channel due to the ceiling height. So long as you have some overhead presence, things are good.
Hate to bug you about subs your videos are great. I was wondering if you can calibrate a polk psw10 with a Yamaha ats 1080. I appreciate your time in helping me find a sweet spot for that setup. Thank you
Why does audessey on my Denon receiver want to make my sub so quiet? It set it to -12dB and I had to bump it up to -3.5dB before it sounded correct. My sub is a Phase Technology Octave series power 12. Also, where should I have the volume set on the sub itself? I have it at its midpoint.
It's kind of a known problem. Which sub are you running? It's definitely a common problem, so the important part is that you're not crazy. Which Denon is it?
I just received my PB-16 Ultra on a pallet. I see you’ve got two haha. I was wanting to put it where your left one is next to my tv that sits on a glass stand. I was thinking with the output it puts out it may rattle my tv which sits on a somewhat flimsy glass stand on carpet, do you have any vibration problems with your two?? I have Guillain-Barré syndrome so where the movers put it will need to stay in that position what do ya think?? Awesome video by the way!!
Thanks! Guillian Barre is rough on, I have a friend recovering as well, not easy. Nor is moving around these monsters, even if you were healthy! The Outlet sale is happening now BTW, check out my most recent video. The PB-16 Ultras are almost gone, but it would be a great time to go dual: sub101.link/LaborDay2019 1/3 of inventory gone in the first 6 hours!
Subwoofer 101, I love your channel. I do have 1 question. What is the difference between Subwoofer Level Adjust and the subwoofer level trim in the test tone? I have my subwoofer level adjust set to off and control the bass trim level from test tone.
I do the opposite, and control the subwoofer level through the subwoofer adjust menu in the audio menu and ignore the test tone levels. As I understand it, they both do the same thing but it is confusing.
Denon Audyssey user here. What if you have a couch butted up against the far wall? Do you use the 'behind listening postitions' when configuring Audyssey? I'd imagine that the boundary effect REALLY comes into a negative play there.. Thanks!
I'm confused when you talk about setting things in the denon like the feet distance of subs. I'm looking at getting either the dual monolith 15s or pb 3000s. and the monolith has a built in manual amp with settings. the pb has a digital. so if these have thier own settings to configure. does the denon just override that? or do they work together. if they work together it would be cool to see a video how you first set up a sub from the power amp and then the avr.
Funny Subwoofer 101, I just red this on a Klipsch forum:Welcome to the forum! On 5/13/2014 at 6:36 PM, Dreadneck13 said: I just bought two Klipsch F-28 floor speakers. I am having a hard time figuring out the best setup as far as settings and crossover.1) Set the speakers to small or large ?2) If set to small what crossover is good to ensure I still get great sound from the speakers and deep bass from the sub?3) My Sub has a r and L input and a LFE input - currently I have it from the receiver sub out into the subs LFE.3) Does the sub always receiver a signal even if the front speakers are set to large. Meaning, I thought that the cross over setting just filters out the signals for the speakers it is set for and doesn't actually send the filtered signals to the sub-woofer, the sub-woofer is its own channel and signals will be sent to the sub no matter what the cross over for the speakers are set. By setting a speakers crossover you are just saying cut these frequencies out - not cut them out and send them to the sub instead (Is that right?)I have:· Receiver: Sony STR-dn1050· Front R/L Klipsch f-28 (maybe I need a better model with a separate mid-range driver)· Center: Mirage OMD-C1· L/R surround: Mirage Nanosat (I want to get new Klipsch surrounds once I figure this out)· Subwoofer: Infinity PSW310 10inThanks!I will assume you are setting up a home theater and are mostly TV movies and gaming...1> Large for sure2> Those speakers are rated to 35Hz. 3> You have the right connection. Sub out to the lfe in. LFE = Low Frequency Effects4> If you have a subwoofer designated in your AVR, you will get signal to it when there is a signal to send. If you defined small speakers, you could set your filter to something higher than 35Hz (let's say 50Hz), and then sounds that are designated for those speakers that you told the AVR they couldn't play (under 50Hz) will be diverted to the sub. If you set the mains as large, then you will get signals that were designated as LFE by the movie or game publisher when they recorded it.
Good video. Question about a second subwoofer; I'm using the Denon AVR-S740H which has 2 subwoofer outputs. However, when I connect two powered subwoofers, the interface doesn't "see" the second subwoofer. It ONLY sees one subwoofer and the Audyssey set up sends only one signal to one sub. Is there a trick to getting this Denon model to "see" the second subwoofer?
Love your videos I appreciate the tips you give out especially that subwoofer gain hack really helped out a lot but I could never be satisfied with my front towers set to small at 60 or 80 hz. It sounds clear and all but I don't hear the depth of the sound when compared to Large. The only time when the small setting sounds good is when I set the audussey setting to L/R bypass mode. But then the subs gets to boomy so I put set it back to the reference setting. Also my speakers probably sounds better Large is because the external amplification I have that could run speakers at the large setting with no straining of power.
+JDmsz Thanks! External amplification does change the story a little. Which subs are you running? That can have an impact, as typical subs tend to have higher output at higher frequencies. I like the "Flat" more than the "Reference" setting myself.
This is the kind of situation I was talking about at the beginning of the video. Most run of the mill subwoofers will produce some serious output from 50-100 hertz, but run out of steam the lower you go. This is super common, and I don't mean to pick on your equipment in particular. In contrast, those on "The List" will go as deep as you can hear, with some serious oomph under 30 hertz as opposed to just making noise. www.subwoofer101.com/best-subwoofers/ With truly flat response subs that have honest relative depth, I can play with the crossover up to 250 Hertz with little issue, where that might be a recipe for serious boominess with a run of the mill subwoofer. The PB-1000's (sub101.link/PB-1000 -affiliate link) may have the same size driver, but the factory rating is an honest 19 hertz, and it only starts to taper a little at 21 hertz, which is still a drastic departure from the norm. The difference is undeniable, especially against most 10" subs. It equates to having more bass at the same listening levels when adjusted right. It's pretty dramatic. You can also try the LFE+Main or Double Bass option when running Large, but expect to have to adjust the subwoofer levels accordingly.
Why do you have 2 refrigerators next to ur tv...j/k (Those are awesome) Would u know why my avr only works (sound) in bypass mode? No dolby, theater, live etc...? Btw older model Onkyo Tx- SV727. Great video!
I have a Tannoy in-wall Subwoofer iw62 TS and I am having a hard time making it work. I have an Onkyo amplifier with both a dedicated left/right sub output and single sub output. I don't see how I can plug those wires into my tannoy since it doesn't have neither nor input... only has l/r speaker wire input type. Any idea on how I can plug it? it is because I need a sub Amplifier? Thanks
Not as well as subs on The List. Very few subs have a truly deep response curve, getting a little louder as it goes deeper. They might "go" deep, but that's not quite the same as "sounding deep". subwoofer101.com/best-subwoofers/
Hey love your videos. Quick question though. You said to do the mic calibration? I did that and it made my system sound a lot worse... I made the left channel a lot louder than the right and it turned the subwoofer channel to -10. Thoughts?
Calibration gets you most of the way there. Check my video on how I set up my Denon X6200. It's a little long, but it should help you get more out of it, little settings can make a big difference. My Bass Hack series is good too.
I would stick with matching subs. Even if it's the same same shape and driver size, the bass tends to favor the weaker sub. I would split your budget for duals from The List, subs I would spend my own money on. The link is in the description of this video.
Thanks, you understand A/V the same way that I do. I appreciate your advice.. I have a modest system that sounds great because of the settings and quality equip... Onkyo, old Bose speakers and a digital TV antenna converter. Your settings advice is much appreciated. I would enjoy hearing how you set an A/V receiver to play the best sound for music? Thanks-KJP65-
Use a simple splitter! Then run room correction again, if it has it. A future upgrade to consider would be an AVR with XT32 room correction. Good stuff. In the meantime a splitter will do the trick.
Good tips on the video. One thing I noticed on my set up was the crossover setting. With my SB16 ultra with auto on selected I noticed it wasn’t kicking in when I expected it to compared to my old SB12. What I did was increased the sub gain on AVR from -4.5 to -3 and then decreased volume on sub from -9 to -11. That seemed to help. Curious though do you think the 60hz crossover I have set on my fronts (Paradigm 85F’s) has more effect on that than my fix? Would having the crossover set to 80 or 90 on the fronts have a greater effect on the auto on function?
+Sammie Prescott Jr I imagine a higher crossover could help. You'd be opening the window from 20-60 to 20-90 Hertz, allowing "more" signal to get through, especially at a higher frequency. Worth a shot, I would think.
Speaking of the atmos issue. When I'm playing a Dolby vision/Dolby Atmos disc in my Sony ubp-x800m2 when I press display its showing Dolby Vision and dolby trueHD 7.1 on the tv screen. But my denon avr-x3600h is displaying atmos on front panel. Is the denon just upconverting? Do I have an incorrect setting on the Sony? wrong?
I noticed that about the ARC channel, and not seeing the AVR on-screen display. Hope the technology advances to fix that issue. Still skeptical of "bouncy house" speakers, and would prefer to have a fully discrete system
Thanks for all of the tips! I've been in the 1st phase of "going to school" for home audio equipment this fall. So, If i was going for the most budget-friendly option available for clear and crisp bass, what are my options? My budget is 400$ (absolute max), so I wont be buying dual subwoofers for quite a long while. I dont have the space or budget for it. My receiver is a Yamaha RX-V681BL 7.2. By the way, I'm also open to the idea of a DIY assembly to lower the cost. I'm sure that should save me a few bucks.
Sadly, all of the subs on "The List" are $500 or more. It's not an arbitrary number, that just happens to be the least expensive subwoofer I would by myself. www.subwoofer101.com/best-subwoofers/ Even though it's not on the list, the SB12-NSD is a great sealed subwoofer. I prefer ported since they have a more comfortable sound. Here are my thoughts between the ported and sealed: www.subwoofer101.com/ported-vs-sealed/ If you can manage an extra $100, the PB12-NSD would be my pick, hands down. SVS sold out very fast, but there are still a few on Amazon. The problem with that is you don't get the 1 year trade up when you go through Amazon. Here's my Amazon influencer page where you can still find a few: www.amazon.com/shop/subwoofer101 If you get the SB12-NSD from SVS, you can trade up within in a year, and you get what you paid less shipping charges, the only time you pay shipping with SVS. You could move to dual PB-1000's, or better yet dual PB-2000's. sub101.link/SB12-NSD (affiliate link)
Good basic video however I was hoping it would help with a problem I have been plagued with for years and cannot for the life of me seem to fix. I have a klipsch 7.2 setup using the 15” subs from klipsch. I want to put a sub on either side of the tv but they cancel each other out and have to reverse the polarity on one and that gives me huge dead spots and boomy spots in the rest. I resorted to sitting them together for the moment but there has to be a fix. I am debating on getting svs pb16 ultra subs but if I am going to have the same problem why spend the $. Any help would be appreciated. Thanks
I hear you. Check out my Distance Hack, that might help. I would recommend running room correction, with the subs on either side, the way you want. Make sure your samples are no further than 2 feet from the first and most important sample. If you go further than 2 feet, your results can get wonky. AFTER you have run room correction, try adding between 1-4 feet to the subwoofer distance value that room correction came up with. So if it's 10 feet try 11-14 feet. Adjust both subs equally. You can go by ear or use Room EQ Wizard, which requires a microphone and a laptop. Going by ear is pretty reliable. With most speakers +4 feet seems to be good. My Bass Hack series: ua-cam.com/play/PLMZU06y9stN6lYQO3ukEEcCne1FtIeEmj.html
Subwoofer 101 thanks. Yeah I’ve done all of that aside from getting to program for the computer. I currently have them side by side which isn’t the most desirable but works the best so far. Yesterday I placed a smaller sub at my listening position and crawled around the floor only to find that one corner was the best. May just be the room acoustics since there are 8 windows and a vaulted ceiling with a wood floor. I appreciate you taking the time to reply.
Honestly, the best way to get a handle on it is to measure the room. If you're getting serious cancellations, being able to see it will tell you more. You can try using a splitter to ensure both subs are getting the same signal. The way dual subs work is by interlacing the same signal, which reduces the standing wave, and therefore the dead spot issue. Maybe use a splitter on subwoofer output 1, and rerun room correction. Apply the distance hack after that (+1 - +4 feet) and see if that helps.
Hello love the video. I have an x1300w now with duel 8 in. Energy subs in my living room. Wed. I am getting the x4500h cyber Monday Amazon deal. My room is 13"x13' with 7.5' ceiling. The left side is open to the dining room I am probably going to put the subs like yours in the vids and I will have to upgrade all my other speakers to work better and to match each other. By best ones are my Infiniti rs1"s so I don't think the x6500h is gonna like them. Any idea what I should go with for the loud speakers please. Thinking I want 7.2.4 config. Or 5.2.4 if the wife does not like the extra rear channels in the way. Thanks guys I am just getting into this av stuff and am learning a lot
As far as speakers go, what kind of budget are you working with? Do you want to stay with bookshelf, or go with towers? I use the SVS Elevation speakers for the surrounds and height speakers, works well using the same speaker for everything except the three main speakers, left, right and center. I read over your comment a little too quickly, sorry about that. I thought you were asking about subs.
@@Subwoofer101 No worries man my budget and what I end up with seem to be two different things I am sad to report. But if you are using the same receiver and like the speakers you use than I will have to check them out. I thought about just getting more infinity rs1 bookshelf speakers at 40 bucks a pair on ebay but they wont compare and I want killer sound at mid to low volume (live on a lake). I am thinking tower speakers and book shelf yes.I am trying to fig out just what to buy it seems tough watching vids. So going with what works for you even in my 13'x13'x7.5' tall room but you did it in a camper so my wife was right size won't matter as much as I thought (still talking about speakers). Thank you so much I have never heard of the speakers you use till I saw your videos but it works for you/the receiver. You have helped me thank you keep up the good work friend .
Got a quick question for anyone I can't seem to find a straight answer to. Dose anyone know for my for my denon avr x4500h what the rear channal out put watts and any other info I might need is? trying to pick out the correct 4 rear channal speakers for it please.
I have a BIC AMERICA F-12 and for the money it's a great sub. I'm the most hated person in my neighborhood since I got iT! Lol I'm going to buy another one! I wish SVS was in my budget. But the size of my living about (18x21) it probably won't do it any justice. The F-12 is powerful enough. Actually my neighbor came home to a few of her pictures on the floor!
just found you youtube page and have a question. I have a Pioneer Elite vsx-36tx (Stereo: 100 Watts per Channel (20 - 20 kHz, @ 6 ohm, 0.09% THD) Surround: 1000W x 5 (20 Hz to 20k Hz, .09% THD)and a Pinnacle sub CS-88 (700 watts) In my previous house the living room was 12 x16ft the house im in now is 14x20 cant get the flutter out when watching movies with a lot of action and explosions. Any suggestions? Will be updating the surround speakers later
I am using a 10 inch 100 watt powered subwoofer for my Home theater in a box and I also have my old 8 inch 100 watt powered subwoofer (not hooked up) and was wondering if I should use both at the same time? Since I only have 1 sub out on my receiver I would have to use a "y" adapter. Thanks
Worth trying out, and yes an RCA splitter will do the trick. Running mismatched is usually better than a single, but not as good as matched in my opinion. So unless it's terrible, go for it.
Hey whisper status I know in general you shouldn't mix speakers brands but could you use the svs prime elevations for atmos with the rest of your speakers being the klipsch referance premier?
I recently upgraded to sony-str-dn1070 7.2 AV Receiver(for room size LWH 24*12*10 ft)it produces 165W per channel, confused in choosing the suitable subs and surround speakers 1)already have 150W active Sub Pioneer S-31 W. Receiver produces 165W & Sub power is 150W RMS does it affect this Sub? 2)Can I hook 1 or 2 passive sub woofer( or car sub JBL Stage 1010) directly to my receiver? reason active subs are costly 3)have surround speakers Pioneer S-11 package(Max input power is 150W) can I use it? 4)suggest some surround speakers, look wise I like compact speakers but I need better audio quality. 5)small or big speakers which is better for my room? 6)why ATMOS speakers are costly ? its just tilted or it has an engine inside the speaker box? :) I dont want loud sound, need deep bass and crystal clear audio. Mostly watching movies & Music
My current setup is 5.1 with an Onkyo NR-646 receiver , the 3 fronts are Polk Audio MC60s and the rears are RC60is. The subwoofer is about to get replaced with an SVS-PB1000. I was hoping I could get anyone could help me with picking out the right crossover, level calibration, and equalizer settings. Thank you
I dont agree on the cross over opinion , i set my klipsch floorstanding towers at 40hz and it sounds damn good , why get huge towers and cut the off ay 80 hz? Makes no sense. I even tried both.. if they can deliver the sound, why restrict it?
I was just looking for someone's thoughts on watching Atmos files on my DenonAvrx1200. When playing these files it gives the option of either Atmos/Surround or DolbyTHD+ neural:x. The DolbyTHD+Neural:x sounds considerably better than the Atmos setting even with Atmos files. Can anyone explain. To my recollection the Atmos files sounded louder prior to the DTS:X upgrade on the AVR.
Personally i think running music on carpet restricts the music flow and and sound actually muddie .since ive took my carpets out .My Polks audio sounds alot better .
which type of speak and subwoofer want to use for yamaha rx v 683 av receiver? How much watts speak and how much watts subwoofers want to use and etc thing.... Please tell me....
Hi I have a problem with my avr and subwoofer. I gonna explain. 2 days ago, i set my avr, subwoofer and surround speaker. It was all good. And the subwoofer has very good effect. But, by next day the level of the subwoofer is reduced by around -14DB, very low volume from the sub. What is the reason? AVR- Harman kardon AVR70 Subwoofer-JBL sub140/230 Front speaker- Sony 6 inch bookshelf speaker Center and surround speaker- Jbl satellite. Front- Large Center and surround- small Subwoofer - Plus Thanks!
Consider dog placement for room acoustic tuning.
Good one!
The dog definitely has a laid-back presentation.
The dog's frequency response is 5-6hz. Check out that breathing :D
You, sir, have made my day!lmao
Yup!!! I use 6 subs in my downstairs,, plus buttkickers! With a Anthem Avm90 great arc calibration. And 4 for now in my upstairs theatre. All my other ones have 2 subs(7 systems) you never can have enough bass!
I thought I was excessive, I tip my hat to you!
Just bought two of the new Paradigm xr13 subs for my living room system, where I use two svs subs and buttkickers in my sofa as well!
I also use a Avm90 pre amp plus gen 2 amps!
I really agree with your tip about room calibration. I have an older amp (pre auto correction with mic). I had always set it by ear. When my good amp died on me during a house move, I went and bought a cheap Pioneer ($500.00 and 80 watts/ch - compared to 160 watts/ch) to use until I got mine repaired. It came with the mic, etc. Once I ran it (the room correction) it was like a whole new world opened up!! I had it set all wrong for so long! Since my move (into a much smaller room where I couldn't even use the big amp), I am still using the Pioneer! I'm a perfect example of what you said! BUT - I did learn! Keep up the great videos!!
Thanks, sorry for the (slightly) late reply! 😂
I am trying out a $400 Denon. Honestly, for what you get, it's not bad at all.
Room correction isn't quite as stellar as XT32, but what's funny is I think they purposely degraded the interface/on screen menu, so that the higher end user interface looks really nice by comparison.
Is it truly a cost saving measure to have a cheap looking menu, while the adjustments are pretty much the same? 🙃
Thank you for watching, and I'm really sorry for missing your comment!
Another big mistake that almost everyone makes is placing their subwoofers on the ground. They should be on a heavy stand or at the least elevated by 12" off the floor. If you can put it at ear level off the ground on a heavy stand this is ideal. It will 100% sound better. Subwoofers should be elevated and almost no one knows this. It makes a big difference in bass quality. Maybe not practical for everyone but well worth doing.
Guessing it puts your body directly in the firing line? As opposed to just your legs. Not sure my wife would appreciate the subby at head height.
No this is wrong. Puting on stand make bass directional. We don't whant that. Shoud be on the floor. No wave cancellation on the floor and front speakers
Dog is beautifully centered. Will definitely improve frequency respons!
I have a few suggestions for you. First, you are most likely missing a lot of your mid tones using such small bookshelf speakers are your main front sound stage. there will be a huge middle ground that is missing between those and your subs. second, you should, if you are really into sound, consider a separate actual amplifier for you main speakers at the very least. no receiver can provide the head room you'll need for dynamic music and movies. the power just isn't there so your speakers will distort badly at louder volumes. next, your subs, although beautiful, are not matched to the rest of your system. they will drown out the rest of the music unless you do the first things i suggested which is a larger front sound stage and more power behind them. also, i would NOT ever recommend someone set their crossover at 90hz. 80hz is the THX standard for a good reason.
i don't think you're explaining things as simplified as they need to be for newbies. break it down and explain things to people assuming they know nothing, which in the case of this video, seems to be what you're striving for as an intended audience.
next, the location and i understand it's due to this not being in a dedicated theater, is wrong for your Atmos speakers. they should be in the middle of the room and not int he front height position particularly if you're not attempting to "bounce" the sound off the ceiling to your seating position. just saying. you'd notice a huge improvement if your speakers were actually located where they are supposed to be, which is in the ceiling.
next, for proper subwoofer response you should at least touch on the "room crawl" test to explain how to avoid bass dead zones. i'm the kinda guy that likes things balanced looking in my house too, but having your subs placed directly next to your image doesn't necessarily represent the correct placement for the subwoofer. in fact, often the subs should be counter corner to each other at least...which isn't visually as impressive as having them up front and center, but will give better bass response in your room which in the end is the actual goal.
i enjoyed your video, and we can attribute this to your coffee if you'd like, but i feel you need to simplify the explainations and then go into much more detail about placement which is one fo the most important things about bass, room correction and sound deadening/bass traps/echo cancellations etc.
good video, keep it up...and hopefully you'll make another one giving better information next time.
you really should try some larger front speakers (still set to small of course which was 100% correct as that automatically makes the crossover set to 80hz) and a separate amplifier to provide the headroom needed when listening to movies at even close to reference volumes.
i'll go watch some of your other videos now. i hope this is taken in a positive and helpful critique type of way and not just criticism which it isn't meant to be.
Jinx Canada 🇨🇦You seem to know a lot. Where can we find your videos?
Jinx Canada ps. I have a KEF 2000 series 5.1 which includes a KEF Kube-2 (has a speaker in each side of sub). Can I place my Subwoofer behind the TV on a corner TV cabinet? To keep it hidden. ?
I'm a huge Kef fan. I think It would be hard for someone to give advice without knowing more about the room you are speaking of (room dimensions, seating and so forth).@@GR8UKGB
Jinx I enjoyed your info and knowledge. You should do more videos on audio sound and set up. PLEASE
Thank you so much for all the subwoofer tips. I can hear the difference already!
did you added 4 ft?
@@JavierSN95 yes, I did!
Sorry I missed your comment! Glad you found my channel useful!
Im not an expert but you really have to consider what type of front L/R mains your running with your subwoofers when crossing over. I feel like you can crossover your subwoofers much lower (down to 80hz ) if you have good towers that can efficiently handle lower frequencies (my L/R mains are set at 60hz). In this case, you'll have a better sounding/more dynamic "front stage" where the low frequencies are smoothly transitioning from your towers to your subs .
Someone correct me if you think my logic is off.
Your AVR crossover is a hard limit for the subwoofer, and a soft limit for the towers.
If you set your tower speakers to Large, listen to a sweep that goes all the way down to 20 hertz, you'll see what your towers are capable of.
Then set them to small, and 90 to 120 hertz.
Then, turn off your subwoofer, and listen to the same sweep.
Your towers will still go down just as low as before, it just won't be as powerful.
Your AVR will not be straining as hard, yet you will get the benefit of the towers' depth.
If you have matching dual subwoofers from my list, (deep bass subwoofers) with very few exceptions, the subwoofers are always going to be better under 90 hertz, so long as they are adjusted correctly.
See my Bass Hack video series for that.
A lot of people feel as though they are "taking away" from their towers by using a higher crossover.
To me, it's more about what you're taking away from the subwoofer.
It's a sharp roll off for the subwoofer, and a more gradual roll off for the speakers.
Definitely experiment, and see what works for you.
@@Subwoofer101 thank you for taking time to write such a thoughtful response!
I’m definitely going to experiment with your process in mind !
ua-cam.com/video/gPMFcCIeeiQ/v-deo.html
Very good tips.
I would add another one.
If you have two or more subwoofers, you should use MSO (multi subwoofer optimizer) +REW+minidsp HD.
It finds the perfect EQ and deley for your subs for having the most flat (or other target curve) that you want to get.
Thank you for the info. I got a dcm tb1212, 130w powered sub (dual subs, one passive) at auction for 40 bucks last week. Along with a yamaha HTR-5590 6.1 natural sound av receiver for 20 bucks (with remote!!!) Not the newest receiver, but still sounds great...even with bose 201 series iv, and acoustimass speakers. They will definitely be getting upgraded...soon.
I'm getting more into home audio and bought a denon receiver. Love it. But dynamic EQ... it sound much more impactful, but is it a good thing to use?
There's a lot of debate about towers vs bookshelf and we are looking for speakers that are not going to be overly large and dominate the aesthetics of the room. The wall that houses our TV is about 86 inches wide near a hallway that cuts through the house. It's about 16 feet from that wall to the back wall. The room is about double that in width with vaulted ceilings. The vaulted ceilings are lined with wood. So would like to avoid drilling into that if possible and wall mount like you.
Current system is Denon AVR-1804 with Bose Acustimass 10, (5.1 setup with floor stands) with an LG 65" C8 OLED. The sound is archaic and needs a major overhaul, but it's still better than a soundbar and TV speakers. My initial thought was to do a Denon X3400h and some Klipsch RP160m bookshelf speakers with an accompanying center and sub. Start with a 5.1.4 setup for Dolby Atmos and go from there. Budget is a factor and looking around for used AV equipment but what is the best bang for the buck speaker system for this kind of setup of not mixing and matching brands?
Having issues with my Marantz sr6010 and stumbled across your page. Delighted to see the subs in the picture. When I put my system together two years ago I went with two svs pb2000 after countless hours of consideration. If anyone out there is on the fence about them... Don't be, they're remarkable.
While i don't completely agree with everything said here from my experience(multiple subs and placements, and also hard bare floors making a difference vs carpet for bass response- mid to high freq bleedthrough or reflections may be another issue though - as bass waves don't even see carpet, due to long wave lengths, etc) , but i definitely agree with his higher up crossover settings for passive typical speakers in a system. (However speakers, sub, and seating locations MUST be setup in correct POSITIONING in the rooms bass response for acoustical considerations, or setting points WILL PRESENT LIMITATIONS AND ISSUES! )appreciate the input here! I concur that there's surely lots of new settings these newer Atmos capable receivers are including- bluray players as well- that require addressing, and adjusting correctly. Like anything else, , to get the most out of your setup, yes, you or someone is going to need to adress the settings and probably compare results. And, yes, the more you're familiar, the quicker these setup processes can be. Bottom line, im now going to look specifically for these recommended settings, and address them.
I do think ill also definitely compare any relative gain settings on the source and receiver outputs for the sub woofer out vs the gain setting on your subwoofer(s)! Honestly, as an experienced AV guy myself, id conceded that i personally only casually ever considered this point! Here this reviewer is recommending that bass is better and more dynamic by setting the gain level from your receiver menu LOWER and conversely adjusting up with your powered sub volume control level instead, in relation
Now THAT may indeed be worth addressing comparing, for sure! I don't hate it!
I personally never spent much time considering this point, so that's helpful indeed. Thank you. I personally typically just set sub gain on the sub itself at 12 oclock,(middle) , and then just adjust for proper levels on the receivers gain level adjust, but listen and measure regardless. But i now definitely will spend more time comparing on this issue!!
APPRECIATE the thought and input, for totes!!
Learn something new every day.
I’m in love with Angel and Bear! I pay attention to them and have to rewind, but I love ‘em! Don’t move them please!
Great video. I would suggest getting a bigger TV though. I bet the sound is huge and a bigger TV would be that much more immersive.
Do you have a video for SVS subwoofer setup for a large room? I have a 8000 cubic foot plus room (open floor plan house), just ordered a PB 2000 and a SB 2000. Want to make the best of it
I normally find your videos very informative and entertaining. However I am confused by your comment that bare floors are not the best thing for acoustic results.Yet one of your lovely dogs is called Bear! Does this mean you have to take the poor soul out of the room when it is movie time? Ans as for Angel, who takes centre stage on this video, due to his position between the subwoofers and the noise dogs make when they bark, does this make him the ultimate sub subwoofer? Just kidding, I love what you are doing. Rock on.
+Paul Upton I'll tell you that while the PB-16's have frightened me on several occasions, nothing has caused the cardiac stress that Bear has induced! He likes to go off full tilt, no warning whatsoever, and he's done it right behind my chair. Middle of the night is fun too.
The dogs don't like sealed subs or the saxaphone, but they will put their heads right next to the subs. I don't like to make my ears bleed. Very comfortable overall.
@@Subwoofer101 Ok, so a Bear on the floor is bad for acoustics so get a long haired dog that barks.
I totally love your channel and the videos you make. However, contrary to conventional practise, after a lot of trial & error, setting my front towers to Full Band totally takes them to another level. I have tried setting them small with different crossovers from 60 to 90hz, but running them LARGE is just another experience. I do know all experts would disagree but I guess it's what sounds better.
I agree with you fully, old school denon 3803. Mission front towers. mission centre and rears All speakers small . LFE only crossover 80 . REL q200e subwoofer mode 2 bypassing it's internal crossover, let the amp deal with the crossover still sounds good for a 5.1 setup .
Great video! Very informative. I'm a noob in the Home Theater department, so I can use all the help I can. I'm running 4 q100's as my mains and a Mythos 7 as my Center with an Emotiva basx s12 sub (AVR X4400H). I am not sure that my setup is up to par because I can barely here my ceiling (Atmos) speakers when playing Atmos enabled shows/movies. Should I factory reset my system and run the manual setup instead of the auto setup?
In step 4: What distance from the sub? I have one sub only.
BIG HELP DUDE! thanks for the great advice man happy new years to you!
Great information. I run matching SW. Now that my old AVR died, I'm looking for an upgrade. One thing I found out, is to find the specs on AVRs with dual SW output. Some AVRs just split the SW signa, meaning manual balancing. Some auto calibrate both SW channels.
I'd look for Denon X3400 or better. The room correction is pretty darn good. I have a few good ones listed on my Amazon page, and if you buy from that page it helps support the channel. The 4300 is pretty reasonable right now, and it's a pretty solid AVR.
www.amazon.com/shop/subwoofer101
Some people have reported better results from using an RCA splitter on AVR's with dual outputs, so they are using it as a single subwoofer output AVR.
For sure, you want the AVR to sample both subs at the same time. I would avoid an AVR that didn't sample both subs together, or use an RCA splitter if that's the case.
On the Denon X6200 I use both outputs with no problem, but my old X2000 I just use a splitter, which is totally fine. The X6200 has better room correction, which is worth the upgrade IMO. I believe XT starts with the 3000 series.
Subwoofer 101 thank you. 3400 is on my shortlist. Old AVR was Yamaha RX-450. Had to use sound meter for level settings, so I'm used to manual balancing. I've also got JAMO 4 ohm speakers, still deciding whether to move to 8ohms. Can't find good information on sound quality. 8ohm@0.09%THD vs 4ohm@10%THD(model dependent). vs available power. I'm thinking, since these days I listen at lower sound levels, 8ohm may be a cleaner sound. Still deciding on speaker choice.
no judgement here, but thank you for being geeked up because I don't believe you would have broke this down and gave me as much info as I needed. Wasn't that coffee from South Park, was it? Very informing, thanks
great info also for music producers and mixing engineers!
Thanks for your information Finally now I can listen to Dolby Atmos DTS X 👍🏼👍🏼
Thanks for the feedback, I love to hear it's helped!
i have untreated room 11x11 and pb 2000 pro xan you tell the cheaper way to do minimal acoustics so that bass sounds great and deep?
This is pretty good, I like to think of sound like light. Speakers are like flashlights , they reflect off surfaces, can be pointed, can be too intense when facing at it directly, etc. Glares... have you all heard of light pollution?
You're lucky, you can quit coffee. Try hooking up systems with a Parkinson's type tremor. Well it certainly is challenging. Thanks for the great information and suggestions for improvement. I have always felt that the purpose of such immersive technology was to give the audience the sense of inclusion in the story. Whether it's riding in Maria's poor iMini with Jason Bourne in Paris, running through The Nostromo with Ripley while hearing Mother continue her relentless countdown, or hearing the quiet menace in the words "I'm sorry Dave, I'm afraid I can't do that." That has been my goal when establishing my system. i've been very fortunate in the fact that i've been relatively unable to acquire the type of components I would wish to include. This gives me the drive to improve my acquisition incentive. I leave you with these immortal words "Soylent green is people!"
Hahaha the Sony BR Player tricked me too. It has very silly setup. Especially because that menupoint is set "auto" by defult and I thought he would know the capabilities of the Deonon AVR no worries. Haha, not at all. Had to set manual and check all the options and then worked, at last. But I used only 2 weeks in "always in Dolby Digital" mode, then figured out. The difference between Atmos 7.1 and the old DD 5.1 is HUGE indeed.
Can you give us some basic settings for different configurations. Thank you
Nice video, was very helpful. I recently purchased a setup in the last two months that I'm really happy with overall, however I feel that I can be getting more out of it. I purchased the Denon AVR 2400X receiver two Definitive BP6 Towers (which I had set on "large" and switched to small after your video, thank you by the way) two Definitive SM45 bookshelfs, and two Klipsch R-15M bookshelfs on stands in the back. My question is regarding the subs, I noticed in your video you mentioned not having matching subs can cause issues. The first sub I purchased is the Klipsch R-110SW which is fantastic, and I added a Klipsch R-12SW. Strangely enough, the 10 inch sub is actually heavier than the 12 inch sub. Anyway, I have the 10inch directly behind my sectional where the couch turns (I purchased a 25 ft subwoofer cable) and the 12 inch sub up front. The first question I have is, for some reason on the Denon receiver setup, it only is registering ONE subwoofer, not both. However, both subs are working. The other question I have is do you think both of those are good subwoofers, and is the configuration correct (one up front and one behind the sectional.) Thanks for your help, I like your videos!
+Jon Schacht I think you have to select the number of subwoofers in the speaker configuration menu.
Driver size is funny. The PB-1000's hit much deeper than many 15's, but they are pretty unique in that way.
Dual subs that don't match are usually better than a single, but not quite as refined as matched duals.
Placement is more flexible with duals compared to a single. Your placement is ok, but you can always experiment. All rooms are unique. I could have a more optimized setup, but it works for the layout.
I have a very narrow view of what a good subwoofer is. I have a list of subwoofers that I would spend my own money on. Most subs are too shallow, and like 95% of subs out there, the Klipsch suffer from the same problem, not much happening under 30 hertz.
The subs on "The List" are a dramatic departure:
www.subwoofer101.com/best-subwoofers/
Thanks for the reply. Can you please explain the difference between the hertz setup on the receiver and the knob on the back of the subwoofer? I'm not exactly sure how to do the setup from the Denon and how that should be matched up with the knob on the back of the Sub. I appreciate your help!
I usually disable the crossover on the sub, which filters off all frequencies above the setting. So setting the crossover to 80 hertz would filter off the frequencies above 80 hertz. If you set your crossover on the AVR at 90, you'd have a hole between 80 and 90 hertz.
I let the AVR handle that, and turn the subwoofer crossover up to its maximum value (like 200 hertz or whatever the maximum is) and just rely on the AVR. Turning it to it's maximum value is basically disabling it.
The crossover on the back of the sub can be used to tune out some unwanted response, but it starts to get a little tricky. I find it much easier to use the AVR.
This goes into more detail about crossovers on the AVR and how it all comes together. www.subwoofer101.com/setting-up-your-gear/large-vs-small-lfe-main-double-bass-etc/
You should review a couple of popular budget subs the Polk audio psw505 and the BIC F12 would love to hear your opinion
I went from the F12 to the SVS PB1000 Pro. The F12 was a great intro to bass. The PB1000 Pro changed my life
😂😂.... do you like BASS or What!😁 You’re a fun contributor and I learn from you videos, TY
love the mindful honesty, very interesting might try that in my youtube career
If you don't shoot straight, your audience will figure it out. Tube Buddy is a pretty useful tool. Here's my affiliate link: www.tubebuddy.com/subwoofer101
They have a free option, but I've been on a paid plan for a while now, and it's been very helpful. The thumbnail generator alone is worth it, and that comes with the free version.
I don't know how you plan to shoot, but I do all of my shooting with my smart phone, and Kinemaster is an awesome editing app. Render time on my Pixel is pretty much minute for minute in 4K. So a 15 minute 4K video takes about 15-20 minutes to render. MUCH quicker than trying to use my laptop.
Good luck!
This may be a silly question - but - have to ask! I have a great older 5.1 AVR without room correction. When I moved and hooked it up it didn't work so had to have it repaired. While it was away I bought a little Pioneer ($400.). It had room setup and I was BLOWN away with the sound! I had it all wrong (by ear)! My question is - If I hook up my old AVR (4X's the power of the Pioneer), will the correction be the same? Or would I have to buy a separate unit to do the room corrections again?
Helps me a lot.
Thanks!
I hope this isn’t a dumb question. Probably is but I’ve tried things and it doesn’t work. How do I get room decor ( pictures in frames or other things on walls ) windows etc. from rattling or making noise from the bass. ( subwoofer )
Not a dumb question at all!! Rattles are a real problem, and resolving them is worthwhile.
Honestly, my solution is crazy low tech.
Tissue. Kleenex, TP, paper towel, whatever works. So long as it's hidden and stays put, as long as it doesn't rattle, you're good.
You can also use neoprene, like a mousepad, or even a cut up yoga mat.
For things that are more visible, you need to get a little more creative, but you get the idea.
Use a little tissue first to see if it resolves the rattle, and if so, but it's visible, figure out what to do from there. Maybe a clear stick-on footpad, whatever works that doesn't stand out.
Questions are always welcome on my channel. At one point in time, I didn't know ANYTHING about audio.
True for every single person in the hobby.
Some "experts" forget that.
@@Subwoofer101 thank you very much. Will do 🤞🏼
Good video the dog blends in nice to . As for me your tips came across me pretty good . My two subs are in the corner of my condo apartment . When I walk around the best bass response for me is those corners . I can see yours is in the front . As for floor yes carpet makes a difference. It does take away the brightness that’s annoying . My amplification is Parasound I have two for bi amping my floor stands. Denon is my AVR x7200WA model. Love those pre outs ! Gives a good option to link to other amps when needed . As for height setup I have AURO 3D 9 to 10.1 that layout seems to blend better in my condo setting. Atmos Two on ceiling . Not enough depth to add another pair . So it’s 5.2.2 for now until my wife and I move in a house soon.
Sounds like a great setup. I hear you on limitations, I'm building an Atmos set up in the RV project, and 6.2.2 seems to be the way to go. 6.2.4 wouldn't have enough separation from the front channel due to the ceiling height. So long as you have some overhead presence, things are good.
Hate to bug you about subs your videos are great. I was wondering if you can calibrate a polk psw10 with a Yamaha ats 1080. I appreciate your time in helping me find a sweet spot for that setup. Thank you
Thank you very much for these videos
I've just subscribed as i have stumbled across your channel. I see you have two SVS PB16's. Absolutely crazy! I can imagine it sounds amazing
Why does audessey on my Denon receiver want to make my sub so quiet? It set it to -12dB and I had to bump it up to -3.5dB before it sounded correct. My sub is a Phase Technology Octave series power 12. Also, where should I have the volume set on the sub itself? I have it at its midpoint.
It's kind of a known problem. Which sub are you running?
It's definitely a common problem, so the important part is that you're not crazy.
Which Denon is it?
@@Subwoofer101 Its a denon AVR-X3000 with a Phase Technology Octave series power 12 sub.
Yamaha made my subwoofer - 10dB and I correct that to +1dB and - 10dB on svs app on phone, sometimes I put more in app if whant more power 👌
I just received my PB-16 Ultra on a pallet. I see you’ve got two haha. I was wanting to put it where your left one is next to my tv that sits on a glass stand. I was thinking with the output it puts out it may rattle my tv which sits on a somewhat flimsy glass stand on carpet, do you have any vibration problems with your two?? I have Guillain-Barré syndrome so where the movers put it will need to stay in that position what do ya think?? Awesome video by the way!!
Thanks! Guillian Barre is rough on, I have a friend recovering as well, not easy. Nor is moving around these monsters, even if you were healthy!
The Outlet sale is happening now BTW, check out my most recent video. The PB-16 Ultras are almost gone, but it would be a great time to go dual: sub101.link/LaborDay2019
1/3 of inventory gone in the first 6 hours!
Subwoofer 101, I love your channel. I do have 1 question. What is the difference between Subwoofer Level Adjust and the subwoofer level trim in the test tone? I have my subwoofer level adjust set to off and control the bass trim level from test tone.
I do the opposite, and control the subwoofer level through the subwoofer adjust menu in the audio menu and ignore the test tone levels. As I understand it, they both do the same thing but it is confusing.
Subwoofer 101
Thanx mate
Denon Audyssey user here. What if you have a couch butted up against the far wall? Do you use the 'behind listening postitions' when configuring Audyssey? I'd imagine that the boundary effect REALLY comes into a negative play there.. Thanks!
I'm confused when you talk about setting things in the denon like the feet distance of subs. I'm looking at getting either the dual monolith 15s or pb 3000s. and the monolith has a built in manual amp with settings. the pb has a digital. so if these have thier own settings to configure. does the denon just override that? or do they work together. if they work together it would be cool to see a video how you first set up a sub from the power amp and then the avr.
Funny Subwoofer 101, I just red this on a Klipsch forum:Welcome to the forum! On 5/13/2014 at 6:36 PM, Dreadneck13 said: I just bought two Klipsch F-28 floor speakers. I am having a hard time figuring out the best setup as far as settings and crossover.1) Set the speakers to small or large ?2) If set to small what crossover is good to ensure I still get great sound from the speakers and deep bass from the sub?3) My Sub has a r and L input and a LFE input - currently I have it from the receiver sub out into the subs LFE.3) Does the sub always receiver a signal even if the front speakers are set to large. Meaning, I thought that the cross over setting just filters out the signals for the speakers it is set for and doesn't actually send the filtered signals to the sub-woofer, the sub-woofer is its own channel and signals will be sent to the sub no matter what the cross over for the speakers are set. By setting a speakers crossover you are just saying cut these frequencies out - not cut them out and send them to the sub instead (Is that right?)I have:· Receiver: Sony STR-dn1050· Front R/L Klipsch f-28 (maybe I need a better model with a separate mid-range driver)· Center: Mirage OMD-C1· L/R surround: Mirage Nanosat (I want to get new Klipsch surrounds once I figure this out)· Subwoofer: Infinity PSW310 10inThanks!I will assume you are setting up a home theater and are mostly TV movies and gaming...1> Large for sure2> Those speakers are rated to 35Hz. 3> You have the right connection. Sub out to the lfe in. LFE = Low Frequency Effects4> If you have a subwoofer designated in your AVR, you will get signal to it when there is a signal to send. If you defined small speakers, you could set your filter to something higher than 35Hz (let's say 50Hz), and then sounds that are designated for those speakers that you told the AVR they couldn't play (under 50Hz) will be diverted to the sub. If you set the mains as large, then you will get signals that were designated as LFE by the movie or game publisher when they recorded it.
I probably did my audessey readings too far apart. Idid the audessy and tweeked using the tone test and ideas on your videos
Great video....thank you for doing it...
Good video. Question about a second subwoofer; I'm using the Denon AVR-S740H which has 2 subwoofer outputs. However, when I connect two powered subwoofers, the interface doesn't "see" the second subwoofer. It ONLY sees one subwoofer and the Audyssey set up sends only one signal to one sub. Is there a trick to getting this Denon model to "see" the second subwoofer?
Same with my Yamaha receiver. More of a reason to go on abs find time those subs I suppose. A little frustrating.
Love your videos I appreciate the tips you give out especially that subwoofer gain hack really helped out a lot but I could never be satisfied with my front towers set to small at 60 or 80 hz. It sounds clear and all but I don't hear the depth of the sound when compared to Large. The only time when the small setting sounds good is when I set the audussey setting to L/R bypass mode. But then the subs gets to boomy so I put set it back to the reference setting. Also my speakers probably sounds better Large is because the external amplification I have that could run speakers at the large setting with no straining of power.
+JDmsz Thanks! External amplification does change the story a little. Which subs are you running? That can have an impact, as typical subs tend to have higher output at higher frequencies.
I like the "Flat" more than the "Reference" setting myself.
Subwoofer 101 I'm running two Klipsch (K100-SW). Don't let the specs fool you it's pretty powerful
This is the kind of situation I was talking about at the beginning of the video. Most run of the mill subwoofers will produce some serious output from 50-100 hertz, but run out of steam the lower you go. This is super common, and I don't mean to pick on your equipment in particular.
In contrast, those on "The List" will go as deep as you can hear, with some serious oomph under 30 hertz as opposed to just making noise. www.subwoofer101.com/best-subwoofers/
With truly flat response subs that have honest relative depth, I can play with the crossover up to 250 Hertz with little issue, where that might be a recipe for serious boominess with a run of the mill subwoofer.
The PB-1000's (sub101.link/PB-1000 -affiliate link) may have the same size driver, but the factory rating is an honest 19 hertz, and it only starts to taper a little at 21 hertz, which is still a drastic departure from the norm. The difference is undeniable, especially against most 10" subs. It equates to having more bass at the same listening levels when adjusted right. It's pretty dramatic.
You can also try the LFE+Main or Double Bass option when running Large, but expect to have to adjust the subwoofer levels accordingly.
Why do you have 2 refrigerators next to ur tv...j/k (Those are awesome)
Would u know why my avr only works (sound) in bypass mode? No dolby, theater, live etc...? Btw older model Onkyo Tx- SV727. Great video!
I have a Tannoy in-wall Subwoofer iw62 TS and I am having a hard time making it work. I have an Onkyo amplifier with both a dedicated left/right sub output and single sub output. I don't see how I can plug those wires into my tannoy since it doesn't have neither nor input... only has l/r speaker wire input type. Any idea on how I can plug it? it is because I need a sub Amplifier? Thanks
Thanks for all those advices !
What about dual klipsch 150 spl subwoofers?will they handle low frequencies good?
Not as well as subs on The List. Very few subs have a truly deep response curve, getting a little louder as it goes deeper. They might "go" deep, but that's not quite the same as "sounding deep".
subwoofer101.com/best-subwoofers/
I understand. That's what I have. Until I can afford the svs or pbs subs
One day
What do you think about Klipsch SPL-150?
Hey love your videos. Quick question though. You said to do the mic calibration? I did that and it made my system sound a lot worse... I made the left channel a lot louder than the right and it turned the subwoofer channel to -10. Thoughts?
Calibration gets you most of the way there. Check my video on how I set up my Denon X6200. It's a little long, but it should help you get more out of it, little settings can make a big difference. My Bass Hack series is good too.
Subwoofer 101 thanks!
Hi. I have only one subwoofer , if I buy another one but not the same model, is that an isue,problem? Thanks,Peter.
I would stick with matching subs. Even if it's the same same shape and driver size, the bass tends to favor the weaker sub. I would split your budget for duals from The List, subs I would spend my own money on. The link is in the description of this video.
@@Subwoofer101 Ok Thank you.
Wonderful dogs!
Thank you, we are very fortunate!
That dynamic volume option. Is that for the subwoofer or just the center channel?
Thanks for sharing by the way.
Larry
I'd say all channels are probably involved.
Do you set your subwoofers to 80hz or LFE
Thanks, you understand A/V the same way that I do. I appreciate your advice.. I have a modest system that sounds great because of the settings and quality equip... Onkyo, old Bose speakers and a digital TV antenna converter. Your settings advice is much appreciated. I would enjoy hearing how you set an A/V receiver to play the best sound for music? Thanks-KJP65-
Thanks for the great video!
Dual sub need avr upgrade...can't have that or can you use a splitter?
Use a simple splitter! Then run room correction again, if it has it. A future upgrade to consider would be an AVR with XT32 room correction. Good stuff. In the meantime a splitter will do the trick.
Good tips on the video. One thing I noticed on my set up was the crossover setting. With my SB16 ultra with auto on selected I noticed it wasn’t kicking in when I expected it to compared to my old SB12. What I did was increased the sub gain on AVR from -4.5 to -3 and then decreased volume on sub from -9 to -11. That seemed to help.
Curious though do you think the 60hz crossover I have set on my fronts (Paradigm 85F’s) has more effect on that than my fix? Would having the crossover set to 80 or 90 on the fronts have a greater effect on the auto on function?
+Sammie Prescott Jr I imagine a higher crossover could help. You'd be opening the window from 20-60 to 20-90 Hertz, allowing "more" signal to get through, especially at a higher frequency. Worth a shot, I would think.
Speaking of the atmos issue. When I'm playing a Dolby vision/Dolby Atmos disc in my Sony ubp-x800m2 when I press display its showing Dolby Vision and dolby trueHD 7.1 on the tv screen. But my denon avr-x3600h is displaying atmos on front panel. Is the denon just upconverting? Do I have an incorrect setting on the Sony?
wrong?
Agree with the coffee. It gets me hyped up to the point that my mind is racing against my voice.
Very informative, and I love your dog, Great info on SUBS.
+Peter G Thanks!
I noticed that about the ARC channel, and not seeing the AVR on-screen display. Hope the technology advances to fix that issue. Still skeptical of "bouncy house" speakers, and would prefer to have a fully discrete system
Agree.
Thanks for all of the tips! I've been in the 1st phase of "going to school" for home audio equipment this fall. So, If i was going for the most budget-friendly option available for clear and crisp bass, what are my options? My budget is 400$ (absolute max), so I wont be buying dual subwoofers for quite a long while. I dont have the space or budget for it. My receiver is a Yamaha RX-V681BL 7.2. By the way, I'm also open to the idea of a DIY assembly to lower the cost. I'm sure that should save me a few bucks.
Sadly, all of the subs on "The List" are $500 or more. It's not an arbitrary number, that just happens to be the least expensive subwoofer I would by myself. www.subwoofer101.com/best-subwoofers/
Even though it's not on the list, the SB12-NSD is a great sealed subwoofer. I prefer ported since they have a more comfortable sound. Here are my thoughts between the ported and sealed: www.subwoofer101.com/ported-vs-sealed/
If you can manage an extra $100, the PB12-NSD would be my pick, hands down. SVS sold out very fast, but there are still a few on Amazon. The problem with that is you don't get the 1 year trade up when you go through Amazon. Here's my Amazon influencer page where you can still find a few: www.amazon.com/shop/subwoofer101
If you get the SB12-NSD from SVS, you can trade up within in a year, and you get what you paid less shipping charges, the only time you pay shipping with SVS. You could move to dual PB-1000's, or better yet dual PB-2000's.
sub101.link/SB12-NSD (affiliate link)
@@Subwoofer101 Don't you think that your turntable is a little too close to your sub-woofer? Feedback?
Good basic video however I was hoping it would help with a problem I have been plagued with for years and cannot for the life of me seem to fix. I have a klipsch 7.2 setup using the 15” subs from klipsch. I want to put a sub on either side of the tv but they cancel each other out and have to reverse the polarity on one and that gives me huge dead spots and boomy spots in the rest. I resorted to sitting them together for the moment but there has to be a fix. I am debating on getting svs pb16 ultra subs but if I am going to have the same problem why spend the $. Any help would be appreciated. Thanks
I hear you. Check out my Distance Hack, that might help. I would recommend running room correction, with the subs on either side, the way you want. Make sure your samples are no further than 2 feet from the first and most important sample. If you go further than 2 feet, your results can get wonky.
AFTER you have run room correction, try adding between 1-4 feet to the subwoofer distance value that room correction came up with. So if it's 10 feet try 11-14 feet. Adjust both subs equally.
You can go by ear or use Room EQ Wizard, which requires a microphone and a laptop. Going by ear is pretty reliable. With most speakers +4 feet seems to be good.
My Bass Hack series:
ua-cam.com/play/PLMZU06y9stN6lYQO3ukEEcCne1FtIeEmj.html
Subwoofer 101 thanks. Yeah I’ve done all of that aside from getting to program for the computer. I currently have them side by side which isn’t the most desirable but works the best so far. Yesterday I placed a smaller sub at my listening position and crawled around the floor only to find that one corner was the best. May just be the room acoustics since there are 8 windows and a vaulted ceiling with a wood floor. I appreciate you taking the time to reply.
Honestly, the best way to get a handle on it is to measure the room. If you're getting serious cancellations, being able to see it will tell you more. You can try using a splitter to ensure both subs are getting the same signal. The way dual subs work is by interlacing the same signal, which reduces the standing wave, and therefore the dead spot issue.
Maybe use a splitter on subwoofer output 1, and rerun room correction. Apply the distance hack after that (+1 - +4 feet) and see if that helps.
Hello love the video. I have an x1300w now with duel 8 in. Energy subs in my living room. Wed. I am getting the x4500h cyber Monday Amazon deal. My room is 13"x13' with 7.5' ceiling. The left side is open to the dining room I am probably going to put the subs like yours in the vids and I will have to upgrade all my other speakers to work better and to match each other. By best ones are my Infiniti rs1"s so I don't think the x6500h is gonna like them. Any idea what I should go with for the loud speakers please. Thinking I want 7.2.4 config. Or 5.2.4 if the wife does not like the extra rear channels in the way. Thanks guys I am just getting into this av stuff and am learning a lot
As far as subs go, there is no better time than right now! ua-cam.com/video/mm8tia_WSCI/v-deo.html
As far as speakers go, what kind of budget are you working with? Do you want to stay with bookshelf, or go with towers? I use the SVS Elevation speakers for the surrounds and height speakers, works well using the same speaker for everything except the three main speakers, left, right and center. I read over your comment a little too quickly, sorry about that. I thought you were asking about subs.
@@Subwoofer101 No worries man my budget and what I end up with seem to be two different things I am sad to report. But if you are using the same receiver and like the speakers you use than I will have to check them out. I thought about just getting more infinity rs1 bookshelf speakers at 40 bucks a pair on ebay but they wont compare and I want killer sound at mid to low volume (live on a lake). I am thinking tower speakers and book shelf yes.I am trying to fig out just what to buy it seems tough watching vids. So going with what works for you even in my 13'x13'x7.5' tall room but you did it in a camper so my wife was right size won't matter as much as I thought (still talking about speakers). Thank you so much I have never heard of the speakers you use till I saw your videos but it works for you/the receiver. You have helped me thank you keep up the good work friend .
Got a quick question for anyone I can't seem to find a straight answer to. Dose anyone know for my for my denon avr x4500h what the rear channal out put watts and any other info I might need is? trying to pick out the correct 4 rear channal speakers for it please.
I have a BIC AMERICA F-12 and for the money it's a great sub. I'm the most hated person in my neighborhood since I got iT! Lol
I'm going to buy another one!
I wish SVS was in my budget. But the size of my living about (18x21)
it probably won't do it any justice. The F-12 is powerful enough. Actually my neighbor came home to a few of her pictures on the floor!
just found you youtube page and have a question. I have a Pioneer Elite vsx-36tx (Stereo: 100 Watts per Channel (20 - 20 kHz, @ 6 ohm, 0.09% THD)
Surround: 1000W x 5 (20 Hz to 20k Hz, .09% THD)and a Pinnacle sub CS-88 (700 watts) In my previous house the living room was 12 x16ft the house im in now is 14x20 cant get the flutter out when watching movies with a lot of action and explosions. Any suggestions? Will be updating the surround speakers later
Hey do u think its best yo lower down subwoofer level on the Avr receiver and turn the gain up on my svs PB-3000 because sub sounds a lil muddy
please what type of subwoofer can i use for this machine? powered or non powered?
Realy cool video;) Thx Dude! Regards from Denmark
Dynamic Equalizer is awesome especially for movies.
I was wondering why Klipsch R 115sw is missing from your subwoofer list. Is it shallow?
It's a step in the right direction, but yes, the response profile is not what I look for.
I am using a 10 inch 100 watt powered subwoofer for my Home theater in a box and I also have my old 8 inch 100 watt powered subwoofer (not hooked up) and was wondering if I should use both at the same time? Since I only have 1 sub out on my receiver I would have to use a "y" adapter. Thanks
Worth trying out, and yes an RCA splitter will do the trick. Running mismatched is usually better than a single, but not as good as matched in my opinion. So unless it's terrible, go for it.
Hey whisper status I know in general you shouldn't mix speakers brands but could you use the svs prime elevations for atmos with the rest of your speakers being the klipsch referance premier?
I recently upgraded to sony-str-dn1070 7.2 AV Receiver(for room size LWH 24*12*10 ft)it produces 165W per channel, confused in choosing the suitable subs and surround speakers
1)already have 150W active Sub Pioneer S-31 W. Receiver produces 165W & Sub power is 150W RMS does it affect this Sub?
2)Can I hook 1 or 2 passive sub woofer( or car sub JBL Stage 1010) directly to my receiver? reason active subs are costly
3)have surround speakers Pioneer S-11 package(Max input power is 150W) can I use it?
4)suggest some surround speakers, look wise I like compact speakers but I need better audio quality.
5)small or big speakers which is better for my room?
6)why ATMOS speakers are costly ? its just tilted or it has an engine inside the speaker box? :)
I dont want loud sound, need deep bass and crystal clear audio. Mostly watching movies & Music
My current setup is 5.1 with an Onkyo NR-646 receiver , the 3 fronts are Polk Audio MC60s and the rears are RC60is. The subwoofer is about to get replaced with an SVS-PB1000. I was hoping I could get anyone could help me with picking out the right crossover, level calibration, and equalizer settings. Thank you
See my Bass Hack series. Everything you asked for is there! ua-cam.com/play/PLMZU06y9stN6lYQO3ukEEcCne1FtIeEmj.html
I dont agree on the cross over opinion , i set my klipsch floorstanding towers at 40hz and it sounds damn good , why get huge towers and cut the off ay 80 hz? Makes no sense. I even tried both.. if they can deliver the sound, why restrict it?
I was just looking for someone's thoughts on watching Atmos files on my DenonAvrx1200. When playing these files it gives the option of either Atmos/Surround or DolbyTHD+ neural:x. The DolbyTHD+Neural:x sounds considerably better than the Atmos setting even with Atmos files. Can anyone explain. To my recollection the Atmos files sounded louder prior to the DTS:X upgrade on the AVR.
2-3000$ dollars covers nothing in my systems!
Personally i think running music on carpet restricts the music flow and and sound actually muddie .since ive took my carpets out .My Polks audio sounds alot better .
It depends on the room. Sometimes rugs, carpet and curtains actually add much needed dampening - again depending on your room. Enjoy your Polks! 👍
Do you run your atmos speakers in height or top
Height. Junction of the wall and ceiling.
All very good tips. Agree with all of them. I'll be certainly recommending this video to people new to home cinema.
I really appreciate that!
The whole blue ray is the same with tvs shipped with eco mode on its to get the power ratings that are advertised
which type of speak and subwoofer want to use for yamaha rx v 683 av receiver?
How much watts speak and how much watts subwoofers want to use and etc thing....
Please tell me....
Gideon.mg. funoy your questions really depend on your room size and how loud you intend to listen
Please take good care of yourself. We’d be lost without you.
Hi
I have a problem with my avr and subwoofer. I gonna explain.
2 days ago, i set my avr, subwoofer and surround speaker. It was all good. And the subwoofer has very good effect. But, by next day the level of the subwoofer is reduced by around -14DB, very low volume from the sub. What is the reason?
AVR- Harman kardon AVR70
Subwoofer-JBL sub140/230
Front speaker- Sony 6 inch bookshelf speaker
Center and surround speaker- Jbl satellite.
Front- Large
Center and surround- small
Subwoofer - Plus
Thanks!
Building my home theater I was good to go with wood flooring now I will be going full carpet.
Where do you buy the center woofer?
Man! Really good advice there. Lots of things I have to check out with my system after I watched your video. Thank you very much :D
Right on, thanks for the sub and like!
Great video!!!
Thank you!