How To Paint Magneto Helmet Cosplay Tutorial
Вставка
- Опубліковано 16 вер 2024
- I have 2 sizes available! For 23 inch and 25 inch circumference heads! E-mail me at gallacmic@yahoo.com if you have any questions.
In this video I was using a different brand of resin that had high amounts of air bubbles when it cured. I have since switched to a higher quality resin that has almost no air bubbles at all and NO WRINKLES!!! Much easier to prep and paint now!
Use "Testors purplicious" for the purple trim!!
My helmet was featured in "Magentos Day Off" by Unhinged Comedy - • Magneto's Day Off
You may have noticed a douche bag on Ebay called "gcfxcosplay" has made a mold off my helmet and is now selling them! Please do not support this thief!! He has made over $1500 recasting off my sculpt!
This is how to prep and paint a cosplay helmet with a professional finish while only using spray paint. This video goes through the process step by step from start to finish.
Note: The Rustoleum Chrome paint used for the trim in this video has shown to have issues curing so its probably best to stick with the Krylon Brilliant Silver or some other brand. Also here is the link for the sander I used. Use a coupon and get it for $14 bucks!
www.harborfreig...
You are a Great Master Technician Costumer! And with your Seamstress Mom, you two are a Dynamic Duo! Thanks for this splendid Paint Technique Upload. I'm sure others here may have reminded you to wear a respirator every once in a while, but I confess I rarely think to put one on myself. Thanks to you, I may just resume repairing & repainting my ANH Vader Helmet. It won't be as shiny as your Magneto Helmet, but you've totally schooled me on the sanding and primer process.
So you don't have to watch the whole video
1st primer coat Sit for 5-7 min (he waited 2 hours and sealed off imperfections)
2nd primer coat, 10-15 min (he waited 2 hours and sealed off imperfections)
(he had a 3rd coat of primer since he did imperfections)
1st paint coat paint 5-7 minutes
2nd paint coat nice wet 5-7 minutes
3rd paint coat nice wet/mist. 15 minutes
1st clear coat light/mist 5 minutes
2nd clear coat heavier/mist 5-7 minutes
3rd clear coat what you see is what you get.
Has to cure for 48 hours before you work with it.
For second paint after you mask it off you do one coat and take off the masking tape.
It was absolutely awesome watching how you did that and seeing the end product! WOW! Fantastic work of art!
The tack cloth tip between coats (for particles that dry in the air as sprayed) is amazing. Never even considered that before. Legend!
Thanks man , I learned more about painting in this video than the previous three ai had watched from of channels .
Dude that is absolutely incredible...that looks movie quality. Nice job man
Thanks. I bought one of these helmets from you about a year ago and it's been sitting on my desk because I've been struggling with the paint job. This really helps a lot.
Perfection! Absolutely amazing job man! This will for sure come in handy when I order mine! Thank you!
About to start painting mine! I've done all the other steps. Can't wait. Thanks for the beautiful helmet!
Thanks for sharing this video, it is very helpful. I bought a finished helmet from you quite some time ago and it was about time for a repaint so I gave it a go.
I had an issue with the tack cloth shedding onto the helmet. I tried 3 different tack cloths, all brand new (though they had been stored for a while), but it was shedding on the helmet, no matter how lightly I ran it across. I ended up using a lint roller to help remove the fibers of the cloth, but I fear that might have roughed up the paint more than I'd like. I think I went too light on the clear coat as well, but with the issues on the tack cloth, I'm not sure if that's to blame. After a day, I didn't think it looked good at all, but after another day the clear coat seems to have cured more and the helmet overall looks pretty good. I think I might try to apply another clear coat to it and see if that does the trick. The instructions on the Clear coat say it's ok to reapply coats at anytime so I figured I'd give it a go.
Anyway, I was wondering if you noticed fibers coming off the tack cloth as well and if so, how to best handle those. I.e. ignore them, pick them off with tweezers, lint roll, etc.
fantastic video. very well made and descriptions spot on. wish all how to videos were this good. thank you
Amazing work dude.
Did u make this helmet? Man, I need to know where I can get one of those. I need one for my comic event at school
im pretty sure he sells these on Etsy.com, or its another seller
Yes I made this. I have some casts still. Email me gallacmic@yahoo.com
that helmet looks very good
Dude I need one of those helmets . Dude that's too cool for words
amazing work man thanks so much for this video! Can't wait for the DOFP helmet!
Nice job. 👍👍
One word.....awesome! Great job man
Will you be doing a video tutorial for how to paint the Days of Future Past Helmet?
Question, when you paint your helmets. Where do you keep them while letting the paint cure or set, especially for the clear coat during its 48 hour wait? Surely you want to try and avoid dust and debris that might find its way onto the helmet?
Do you just leave it in the garage or move it into your home or keep it on the back porch?
That bit of info would help a noob like me.
30:07
Awesome tutorial. Very helpful
This is awesome! I have the more rugged one MF wore and I don’t want to make it shiny. It also has a very weathered look with grooves and cracks. I’d appreciate any tips for those steps cuz this video helped me out A LOT with everything else!!
EXCELLENT WORK! EXCELLENT TUTORIAL! THANK YOUUUU!!! I am very impressed and this information will be Most useful. cheers!
Dude, you look like you could be Garret Dillahunt's younger brother.
make sure when you do this your garage door is closed so that wind doesn't pick up and paint your cars as well lol
Here was my concern about the helmet being painted in chrome. I tried using it and it only came out looking. Of course, to my part, it was on a 3d printed test piece and it wasn't prepped. Anyway after you sprayed the chrome, you just left it alone? No other protection?
I ordered a ant man mold and i was wondering after spray paint everything silver and wait 2 days for the paint to dry can i just paint over the silver example *red* for the side of the helmet like how u painted over the dark metallic color with silver on the trimps?
Any special instructions for the wet sanding?
Amazing job! Congratulations! :D
Great work ! I've learned so muc h thanks to you !
What did you use to cast the helmet? What's the urethane product called? I've only use urethane that has a rubber finish.
I like this helmet slot you did great I've like to make one 😊
At the end, you don't spray the Crystal Clear Enamel over the trim to make that extra glossy?
No you dont clear coat that silver kind or it makes it look like crap. It even says on the can not to clear coat over it.
good tut man thank you for posting this.
Thank you, awesome overview
2 questions:
1. What color purple should we use for the classic trim? A metallic one?
2. Do we or don't we clear coat the trim? I would think that we should but you did not? Why and why not?
The purple is called "Testors purpl-icious" I got from Hobby lobby. The purple is a one stage paint meaning it has clear coat mixed in already so it goes on plenty glossy. The silver can says not to clear coat it. I tried it before and it makes it look like crap.
Hi, can do also do the tutorial for days of future past helmet too? Thnks
Great video! Thank you for making this. Where did you get the primer sealer? I'm having a hard time finding in stores. Online would be my last choice.
I was having a hard time finding it too.. its also known as 'stain killer' sealer which is how I found it
The primer sealer I got at walmart in the automotive section where you find the Bondo
Beautiful
Hey just wondering hows the days of future past cape going? Looking forward to see it any updates?
does that work on Plastic also ? like 3D painted..
Couple of quick questions:
1) When painting the classic with the Dupli-color red, do you also use the Dupli-color clear coat or do you use the Rustoleum clear coat?
2) With the Testors Purplicious do you still just use 1 coat and/or do you clear coat the purple?
Thanks! Love your work.
Guy Baker 1) I use the rustoleum clear over the duplicolor red.
2) I do not clear coat the purple. It is a one stage paint meaning it has clear coat in it. I just do one wet coat and BAM its done.
So I finished the clear coat a few hours ago. As it's drying, it's not quite as shiny as I'd like. Can I add another coat of clear coat now or would that mess it up?
Guy Baker Read the label to make sure it says, "recoat anytime." If it does then you are ok but I would start off with a few light mist coats a few minutes apart then go with the gloss coat
Yeah, after I posted I saw the recoat anytime! Thanks, 2 days and I get to do the purple!
+Guy Baker I dont use Duplicolor clear coat I use Rustoleum crystal clear enamel over the black night metallic or the red. I do not clear coat the purple it has clear coat in it and only do one wet coat until it looks good.
Phenomenal!!!
Emailed you about availability 👍🏼 Craig
burn, recasters, burn! :( great video and technique!
It can also be red
great vid it helped me so much i have an original design and i molded it with smoothon mold max 30 and cast it in the D66 risen everything i paint on it just peals off what do you wipe the plastic down with before you prime it to remove the release agent from casting?
fel3000ft I soak the helmet in cold water with dish soap and that gets rid of the release agent. Im using stoner urethane mold release part number S236
Love it great video
The helmet is movie accurate.
Thank you!! :)
What color purple should we use for the trim if we are going classic colors?
Purple-licious Testors paint
Oh, my god i want the helmet
I wanna buy one. Please let me lol
That's not sick, thats UBER SICK AWESOME DUDE!!! :P
Shaw Sebastian Helmet
can you make marvel now helmet please
How did you make it
How much would one of your painted helmets cost
do it yourself! You'll appreciate it much more!
Can we buy this
Where can I find the white helmet??? Please is important
email me gallacmic@yahoo.com
Make It Mike but I don't want to spend money, I must build it alone
awesome :)
Are you still making and selling these(magneto helmets)?
Shoot me an email gallacmic@yahoo.com
if only you could post this earlier~~~~~
now i know what i have done wrong :(
It's for sale
How did you get that helmet
He made it
Chebre
TAMUITO VEITO ARMCARA DO MAGNETO
Can you make me a helmet? I will cash you out
?
do they have primer and clear coat all in one sprays?
i guess u would say its going to be the end the world soon so why not fill our lungs up and get high.
Lol