I’m a new user (previously a Cricut user) I found that after adding an offset to text you can “slice” away the center of the offset leaving the outline of the offset and the original text using the ‘stamp’ (the two squares that overlap with a space cut away from the overlap) so there is a 3rd option in Pro
@@marybcreative it will pause and you'll need to tell it to continue. This is so you could switch between a score tool versus the blade. You'll need to either turn it off or just press continue when it pauses.
Bonjour, je viens d’acheter Juliet, et je découvre votre chaîne, en France Juliet est peu présente et nous n’avons pas beaucoup de vidéo, merci pour vos explications. Avez vous la possibilité d’activer les sous titres je puisse avoir en français. D’avance merci
Good information as always EllyMae. Ty
@@BarbaraRogers65 thank you!
I found this really helpful. Thanks!
@@marybcreative you are welcome!
Thank you for this information very informative!
@@debrabrowning7914 you are welcome!
I’m a new user (previously a Cricut user)
I found that after adding an offset to text you can “slice” away the center of the offset leaving the outline of the offset and the original text using the ‘stamp’ (the two squares that overlap with a space cut away from the overlap) so there is a 3rd option in Pro
Yes. I was showing only the Basic features for using the options for Offset.
If you don’t turn off “prompt for tool change” will the machine continue to cut using the current tool inserted?
@@marybcreative it will pause and you'll need to tell it to continue. This is so you could switch between a score tool versus the blade. You'll need to either turn it off or just press continue when it pauses.
Bonjour, je viens d’acheter Juliet, et je découvre votre chaîne, en France Juliet est peu présente et nous n’avons pas beaucoup de vidéo, merci pour vos explications. Avez vous la possibilité d’activer les sous titres je puisse avoir en français. D’avance merci