Why should you spend 50 bucks on a 20 dollar radio modded with older version of Si4732? I wouldn't. So please don't. If you still wish to, you'd have to find the modded radio on ali yourself, I won't provide any links.
You've seen the images. Tell me something. Am I seeing it right? AMI pin takes signal from stock antenna through 100 nF cap and FMI pin takes signal through that onboard IPEX connector?
@@codernov I am also searching info about this board. Looks yes, there are 2 antennas input, but not clear description or schematics. I can find only 2 lots in aliexpress with this board, so it its something very new.
SI4732 Chip And Crystal Oscillator Component Modification Module For Uvk5/K6 PLUS FPC Version For Quansheng UV-K5 UV-K6 check that out it has the antenna input
Hello, I've been looking for the finished device on the internet for a while to see what they've built, but I can't find it. I can't find anything on AliExpress, just the modules. Good question: is there a help link or something?
Было бы замечательно еще ролик сделать по замеру чувствительности при таких модификациях , особенно интересно на средних волнах . у меня на плате перваой ревизии всего 32 мКв. (-90db) (заменой дросселя ). Жду вторую ревизию еще не пришла. It would be great to make another video on measuring sensitivity with such modifications, it would be especially interesting on medium waves. I have only 32 mKV(-90db) on the board of the first revision. (replacing the throttle). I'm waiting for the second revision, it hasn't arrived yet.
I'm an old guy who is too shaky to work on surface mount technology anymore. My eyesight isn't great either. So anyone out there who is willing to modify a K5 or K6 with the v2 board for a reasonable amount of money? If not, guess I'll wait until the Chinese come out with them. 😃
Thank you, engineer, for your wonderful efforts🙏👍👍👍
Why should you spend 50 bucks on a 20 dollar radio modded with older version of Si4732? I wouldn't. So please don't. If you still wish to, you'd have to find the modded radio on ali yourself, I won't provide any links.
radio costs 11..13 dollars. si4732 board costs 7 dollars, quite expensive, I think 2..3 dollars is enough.
There is already newer V2.1, with pigtail connector for antenna.
You've seen the images. Tell me something. Am I seeing it right? AMI pin takes signal from stock antenna through 100 nF cap and FMI pin takes signal through that onboard IPEX connector?
@@codernov I am also searching info about this board. Looks yes, there are 2 antennas input, but not clear description or schematics. I can find only 2 lots in aliexpress with this board, so it its something very new.
@@Viktorherenowhereich habe diese Platine ( fertig bestückt ) bestellt und sollte so in 14 Tagen bei mir in Deutschland ankommen hoffentlich 😉😁
@@stefanzuhause6308 Nice) Omoet (yt blogger) also ordered, so soon we will see reviews...
SI4732 Chip And Crystal Oscillator Component Modification Module For Uvk5/K6 PLUS FPC Version For Quansheng UV-K5 UV-K6 check that out it has the antenna input
Hello, I've been looking for the finished device on the internet for a while to see what they've built, but I can't find it. I can't find anything on AliExpress, just the modules. Good question: is there a help link or something?
Search ali for si4732 modified uv-k5
@@codernov Thanks 👍🏻😉
Please keep us updated should the completed radio go with version 2 board. thanks
Было бы замечательно еще ролик сделать по замеру чувствительности при таких модификациях , особенно интересно на средних волнах . у меня на плате перваой ревизии всего 32 мКв. (-90db) (заменой дросселя ). Жду вторую ревизию еще не пришла.
It would be great to make another video on measuring sensitivity with such modifications, it would be especially interesting on medium waves. I have only 32 mKV(-90db) on the board of the first revision. (replacing the throttle). I'm waiting for the second revision, it hasn't arrived yet.
I'm an old guy who is too shaky to work on surface mount technology anymore. My eyesight isn't great either. So anyone out there who is willing to modify a K5 or K6 with the v2 board for a reasonable amount of money? If not, guess I'll wait until the Chinese come out with them. 😃