Rear Window Repair on 90-95 4runner Toyota

Поділитися
Вставка
  • Опубліковано 22 тра 2016
  • This is the fastest and easiest way to fix the tailgate window on a 1990, 1991, 1992, 1993, 1994 or 1995 Toyota 4runner. In this video I will show you how to disable the rear wiper blade motor and bypass the wiper blade position sensor so you can restore the functionality of your rear tailgate window on your second generation 2nd Gen Toyota 4 runner.
    Link to www.yotateck.com article titled "Back Window Relay Fix"
    www.yotatech.com/f128/back-win...
  • Авто та транспорт

КОМЕНТАРІ • 141

  • @brehnpander6562
    @brehnpander6562 5 років тому +20

    This is the most helpful thing ever, thanks so much. Took me 45 seconds to fix her

    • @utaw-br8ge
      @utaw-br8ge 3 роки тому +1

      This would have saved me an hour or so if I would have looked it up a little sooner... but when I found it I was sure grateful.. took me less than 2 minutes to fix!

    • @lucascaughman7998
      @lucascaughman7998 2 роки тому

      Where do you get that jump wire rig thingy?

  • @gavindenney3138
    @gavindenney3138 2 роки тому +3

    I know you made this video awhile ago. I just wanted to let you know you helped this small business owner keep his tools out of the weather with this fix thank you very much man

  • @momitch62
    @momitch62 4 роки тому +4

    Oh my god this saved my life. exactly my situation. I just ripped off the back off the tail gate too like you did, I couldn’t figure out where the electronics for the window actually was so I searched this up hell yeah saved me lots of time

  • @pancratius8886
    @pancratius8886 2 роки тому +2

    Helped me fix my buddies rear window in seconds! First time I've ever had a youtube video help me with a problem and it go so smoothly!

  • @moneyseeker8886
    @moneyseeker8886 3 роки тому

    Thank god you had this method on UA-cam. A local mechanic was trying to charge me $800 just to fix this!!

  • @gnarlivin89
    @gnarlivin89 2 роки тому +11

    This video is very well done. It's tough to find good how-to's on 2nd gen's these days as they're getting pretty old. Thanks for putting in the time to make a quality, step-by-step, video on this. I'm hoping it'll get my window working. I usually have to go in the car, start it up, then press the window down button 20-60 times for it to roll down. The wiper being in slightly the wrong spot seems like a possible cause.
    EDIT: Looks like that wasn't the issue...any thoughts on what it could be? The fact that it will roll down if I try enough times, and it clicks every time I press the button, tells me it is getting power. Maybe it's the relay?

    • @BenHuttash
      @BenHuttash  2 роки тому

      It’s been so long since I’ve worked on my rear window I don’t remember all the components. There are a few safeties that can prevent it from working such as the door must be closed to operate it. But a really is a great place to start. Relays can get fail in lots of ways including sounding like they click but not passing current. I think the relay is a great place to start.

  • @armandochavez3439
    @armandochavez3439 6 років тому +3

    Saw this video MONTHS ago and kept in the back of my mind. I’m glad I was able to find it again. Thank you thank you thank you.

  • @carreteras101
    @carreteras101 3 місяці тому

    thanks for the video! this is exactly what has happened to my 90 4runner, so now off to diagnose. much appreciated.

  • @Betho42
    @Betho42 7 років тому +2

    I can't believe seating the rear wiper WORKED for me !!! Thank you soooooo much. It's been one of those months when everything is breaking and it gets overwhelming ( when you're broke ) So thanks again, you are my hero ! YOU TUBE ROCKS !

  • @mysticgarage1243
    @mysticgarage1243 5 років тому +2

    4th of July 2019... This helped me immensely. Thank you!

  • @simmydreja2088
    @simmydreja2088 6 років тому +1

    Been wanting to know how to do this for so long and I'm about to re paint the car so il be welding up the rear wiper holes and taking it out completely, thanks legend!!!

  • @Micharus
    @Micharus 3 роки тому +4

    What a lot of other people have said, very useful. I did this before trying to take out the winder motor. Now at least I know this is not the problem.

  • @thomaskennedy8661
    @thomaskennedy8661 6 років тому +8

    Thanks mate bloody best vid on the internet

  • @mikem7788
    @mikem7788 6 років тому

    a 1000 thanks for this vid. fixed my window issue in less than 10 minutes, very easy to do.

  • @stephenlayne9351
    @stephenlayne9351 7 років тому +1

    I thank you Mr. Huttash for this very informative video, let me also compliment you on the production of the video as well.
    Great job.

  • @tumult04
    @tumult04 6 років тому

    I just used this video for my 93 . Thank you so much!!

  • @aala2007
    @aala2007 11 місяців тому

    This is the first video appearing in my search and was a huge help. Thanks Ben!! The issue was indeed the wiper blade. Jiggled it in place and window engaged!

  • @travisyoung3455
    @travisyoung3455 8 років тому +1

    Worked like a charm! Thanks Ben!

  • @goodtry100
    @goodtry100 7 років тому

    My son was returning to college and his back window would not go down. We tried the first trick of seeding the rear wiper and it worked. The rear window is now operational and the time it took to fix was about 1 minute. Thanks for the tip.

  • @conrad5541
    @conrad5541 4 роки тому

    Thank you for this video! I went out and wiggled my rear wiper and the window opened. Got to know my truck a little better today.

  • @smthest
    @smthest 2 роки тому +1

    I call my 94' DogRunner. With Sunroof,Rear Window and all windows down the boys love it!. Three days ago we were out and rear window would not go up. Your fix was done in ten and a BIG Thank-You!

    • @BenHuttash
      @BenHuttash  2 роки тому

      Hell yes! I'm glad it was useful to you. I drove around for over year with my window not working until I figured out this little bypass of the wiper motor. I still haven't felt the need to try and fix it properly where I can use the rear wiper.

  • @no_I_dont_my_real_name_on_yt
    @no_I_dont_my_real_name_on_yt 4 роки тому

    It works! Thanks! You just saved me $500 for a new tailgate!

  • @bensfixitpage341
    @bensfixitpage341 Рік тому +1

    Thanks man. You saved me a ton of troubleshooting time.

  • @kristenthelian9353
    @kristenthelian9353 Рік тому +1

    Very helpful j have been looking for a video for months !! ❤

  • @ericgil7853
    @ericgil7853 2 роки тому

    Great info just picked a 91 up today and can't wait to try this tomorrow

  • @OfficialTravisThompson
    @OfficialTravisThompson 3 роки тому

    man thank you so much!!!!! 2021 and still helps

  • @Hussain_Alqamaish
    @Hussain_Alqamaish 3 роки тому

    Thanks for the video it helps me alot to fix my 4runner back window, I appreciate that 🙏

  • @rook13pdx
    @rook13pdx 3 роки тому

    ...the most amazing thing I have ever come across.

  • @georgematias2010
    @georgematias2010 5 років тому

    Thanks my friend, finally my window is working

  • @theflyinghamster8442
    @theflyinghamster8442 5 років тому

    Thanks mate! really good video, will sort mine out at the weekend!!

  • @mariamurga2144
    @mariamurga2144 5 років тому +1

    Totally worked, thanks so much!

  • @kerriannickcacciata435
    @kerriannickcacciata435 4 роки тому

    AMAZING! Thank you- it worked!! I was about to drop it off somewhere and was expecting to pay $$$$$

  • @motorcrosser112
    @motorcrosser112 4 роки тому

    Thanks for posting man! Totally worked!

  • @Yourmomma.24
    @Yourmomma.24 3 роки тому

    Thanks for this fix
    I found it a while back when doing the mech in the door.
    But today the window wouldn’t come up after I accidentally hit the rear wiper switch.
    This worked just fine.
    Thanks again for the video !
    Joe Q. Public

  • @joshuachauncey5775
    @joshuachauncey5775 5 років тому

    Holy crap your a godsend you saved me all kinds of time and time is money!

  • @chavocinco
    @chavocinco Рік тому

    Yep ! Also, I changed the lone fuse that is hiding back behind the fuse box by the drivers brake pedal. It was a 30 amp pink box looking kind and it has helped with so much! I have a 95

  • @boahumada
    @boahumada 6 років тому +1

    thank you for this wonderful video!!!!

  • @brtwigg
    @brtwigg 3 роки тому

    Super helpful, problem solved - thank you!

  • @limhuang
    @limhuang 6 років тому +1

    Thank you very much. I’ve got mine working.

  • @BartGrant1
    @BartGrant1 7 років тому +1

    Thanks! I tried all of the "other" things before I found this video, but at least I found a tailgate without the rust that mine has at the local wrecking yard. Now to move all of my good, working parts into the good door. ツ

  • @nanaheather9994
    @nanaheather9994 3 роки тому +1

    😊 Thank you sooooo much! My wiper hasn't been parking correctly for years and the inside window button quit working looooong ago also. Then yesterday the window wouldn't roll down with the key. 🥴 Stumbled on your video!!! Manually parked wiper. Now the key and inside button work to operate the window! 🥳
    Will continue on with bypassing wiper motor as you suggest 😉
    THANK YOU VERY MUCH!

  • @jerrywisniewski8845
    @jerrywisniewski8845 3 роки тому +1

    You are a God sir. Thank you for this video

  • @johnbarton1956
    @johnbarton1956 5 місяців тому

    Nice job man! Thank you!

  • @jscotthoward2764
    @jscotthoward2764 Рік тому +1

    I know it has been a while since you made the video, but thank you! Bypassed wiper motor in a matter of minutes.

    • @BenHuttash
      @BenHuttash  Рік тому

      I’m still running mine this way. I though about opening up the back of the wiper motor and cleaning the contacts that cause the interlock problem but haven’t bothered with that yet. This little bypass solution is just so easy to do. Glad this video was helpful. Thank for taking the time to leave me a comment.

  • @jeremysmith6794
    @jeremysmith6794 2 роки тому +1

    Thanks for the video so helpful!!!

  • @clos5700
    @clos5700 5 років тому

    Thanks for the video. What size male terminals and gauge size wire did you use for the bypass.

  • @timothykenyon106
    @timothykenyon106 7 років тому

    Thank you for the insights, I had a feeling the 2 operations had a connection, or shared a connection, since they both failed together.

  • @ruparusse1114
    @ruparusse1114 4 роки тому

    Awesome video! Thank you!

  • @DavidMorales-nomadtec
    @DavidMorales-nomadtec 2 місяці тому +1

    Great video and instructions! Unfortunately, I'm pretty sure it's either the controller or the relay on my truck.

  • @MrRolsen83
    @MrRolsen83 7 років тому

    Thanks ol' sport! Going to give this a try.

  • @Southernsavage1988
    @Southernsavage1988 5 років тому +1

    Worked amazingly thanks from South Carolina USA

  • @rippspeed1
    @rippspeed1 2 роки тому +1

    Thank you!!! Ill do the wiper blade fix ... for my 2runner. I just need to figire out which wires to jump to roll the rear window down.

  • @-WranglerEcoDiesel
    @-WranglerEcoDiesel 3 роки тому

    Thanks for the video, quick problem solved, my wiper was not seated correctly.

  • @brettniles
    @brettniles 7 років тому

    Extremely helpful.

  • @PortCityVisuals
    @PortCityVisuals 3 роки тому

    This is was great. Thanks.

  • @toyo_roadrunner
    @toyo_roadrunner 4 роки тому

    thank you. saved me some money

  • @madcook1936
    @madcook1936 6 років тому

    Thank you for this video

  • @shanestanford4502
    @shanestanford4502 2 роки тому

    Best trick ever 👍👍👍👐

  • @gregwilcox55
    @gregwilcox55 4 роки тому

    Great video. I have a 91 4Runner and the backdoor will no longer open. Do you have any videos or advice on how to fix this issue?

  • @magic8ball88
    @magic8ball88 7 років тому

    This worked for me! Thank you! If I were to make 4 more jumpers but use them to bridge the remaining pins would the rear wiper work? Or will the jumper prevent it from working?

  • @devonjohn8407
    @devonjohn8407 2 роки тому +1

    Thank you so much!

  • @georger4840
    @georger4840 2 роки тому +1

    If the window is going down slowly and getting stuck / stopping on way back up with switch in car and key….does this sound like a motor / mechanical issue rather than electrical issue that could be fixed with the solution in the video.
    Any tips / pointers appreciated
    Thanks

  • @usernamedan12345
    @usernamedan12345 7 років тому

    Thanks for the great video. I'm going to give your fix a try. On my 1990, the rear window seems like it starts to go a little bit and then stops. I have a brand new battery so I don't think that's the issue. Do you think it could be a weak motor? Your motor looked super efficient. All my power windows seem weak.

  • @lukebills5699
    @lukebills5699 7 років тому +1

    Very very helpful thank you so much

  • @JoseDiaz-xw6ft
    @JoseDiaz-xw6ft 3 роки тому +1

    Where do u get that little jumper cable

  • @Thomasvisions
    @Thomasvisions 5 років тому

    Awesome video! Mine still works fine, but I know how to fix it if it stops! Do you have any videos on how to remove those back panels so I can get to the speakers and replace them?
    Thank you again for help!

  • @korysomosko7197
    @korysomosko7197 3 роки тому

    What parts would I need to make the bypass wire?

  • @ponofisher8166
    @ponofisher8166 4 роки тому

    4 years later and still saving people

  • @dtong8052
    @dtong8052 11 місяців тому +1

    Is there a link to buy a jumper wire?

  • @soniacano6318
    @soniacano6318 6 років тому

    Where did you get those jumper cables?

  • @HumbleGolds
    @HumbleGolds 3 роки тому

    Dang. Very helpful.

  • @fruit1040
    @fruit1040 6 місяців тому

    can you please link the bypass cable i cannot find it online

  • @jimc12
    @jimc12 4 роки тому +1

    Hey Ben, do you still have the 4runner? If so where are ya in Texas?

  • @2tone_2.4
    @2tone_2.4 Рік тому

    Mine worked for a while but just recently stopped rolling down,would doing this fix it?

  • @lukasziman
    @lukasziman 8 років тому +1

    thanks buddy!

  • @gilbertoortiz6526
    @gilbertoortiz6526 3 роки тому

    Gracias desde Tijuana

  • @ryanczapiewski
    @ryanczapiewski 8 років тому +1

    thank you so much man !!!!

    • @BenHuttash
      @BenHuttash  8 років тому

      +ryanczapiewski I hope this video saved you all the hassle of tearing your truck apart.

  • @pojdiavaj1422
    @pojdiavaj1422 4 роки тому

    Superb!!!!

  • @Jhoffa2391
    @Jhoffa2391 Рік тому

    What gauge wire did you use

  • @alexwalker420
    @alexwalker420 4 роки тому

    I unfortunately let my 93 4runner sit for 6 months and the rear window worked fine before it sat. After getting it going again for the winter months I realized the rear window only goes down about an inch then stops and can only go back up? Rusted guide rail?

  • @simpsimpson5175
    @simpsimpson5175 3 роки тому

    Thanks!!!

  • @renadenison6759
    @renadenison6759 Рік тому

    Thank you buddy much help, I have a 92' everything works except, I can't roll the rear back up with the key? I'll scroll through the comments to see if anyone else has the same problem, or if it was supposed to be like that? Cheers! Happy fourth!

  • @sahilverma6980
    @sahilverma6980 7 років тому

    Thanks for this tutorial! Any idea on how to get the read defogger working? i have a 1993 4runner and when i switch on the rear defogger the button lights up but even after 30 minutes the rear window shows no signs of defogging.

    • @digirails1845
      @digirails1845 2 роки тому

      So itsnpossible that the rear window itself is failing. I replaced the original rear glass in mine a year or two ago cause it turns out the entire bottom steel frame (that lets it be lowered and raised, which also has the electrical connections for the defogger) had rusted out completely

  • @Farrell_instincts
    @Farrell_instincts 9 місяців тому

    So I did this, and it rolls up but not down.
    I plug my wiper back in (it's up and seated) and it will now roll down and not up.
    Any takers?

  • @oddballdynamics.9658
    @oddballdynamics.9658 3 роки тому

    Thank you v

  • @WoWIbcman
    @WoWIbcman 7 років тому

    Where can i get one of those little wires that you jumped the sensor with? the little red one with the metal tips

    • @dtong8052
      @dtong8052 11 місяців тому

      Any luck finding one, I need one too

  • @chickenduck839
    @chickenduck839 7 років тому

    where can I found those

  • @user-rl8jt3zm4r
    @user-rl8jt3zm4r 7 місяців тому

    Thank ❤❤

  • @user-jc5jp4to5c
    @user-jc5jp4to5c 7 років тому

    Спасибо тебе

  • @Jhoffa2391
    @Jhoffa2391 Рік тому

    Does anyone know a way to roll the window up manually?

  • @erickelgrande99
    @erickelgrande99 8 років тому +1

    What's the name of the little red cable you use to complete the circuit ?

    • @BenHuttash
      @BenHuttash  8 років тому +3

      +Erick Soto I was calling that a jumper wire. It's something I made using flat male quick connect terminal ends on both sides.

  • @luiselias1887
    @luiselias1887 5 років тому

    I have e 1993 4runner the key brok and in the latck.
    Where can i buy a repleasement anyone?

  • @Dinno120
    @Dinno120 7 років тому

    where can you find those little jumper cable that you used?

    • @rangerdanger766
      @rangerdanger766 4 роки тому

      grab some wire and spade connectors. quite easy

  • @RBdiverman
    @RBdiverman 8 років тому

    Save me about five hours of pulling my hair out. Thanks a lot. Work awesome. Do you know why this issue happens and how to solve the main issue?

    • @BenHuttash
      @BenHuttash  8 років тому

      +Stephan sleeis I hope the link to this image works. The way the wiper knows what position it is in is with the park contacts scooting across a contact ring. I have never taken mine apart to see what's wrong but I imagine that these contacts have gotten dirty, have worn down or have broke off. If you wind up fixing it let me know how it goes. Here are two links to a wiper motor with the cover off of it, not sure what car this came off of but they are all more or less the same. goo.gl/images/STqxnN pop.h-cdn.co/assets/cm/15/05/480x304/54cab355033b7_-_wipers_03_630_1110-de-65918479.jpg

  • @guybartlett9587
    @guybartlett9587 6 років тому

    Thanks

  • @lauraholmes2357
    @lauraholmes2357 4 роки тому +1

    Great video! Can I easily find that little red jumper cable in auto part stores?

    • @RyrieRoth
      @RyrieRoth 4 роки тому

      did you find one? I'm looking for one too!

    • @chrisdyck1434
      @chrisdyck1434 3 роки тому

      @@RyrieRoth you make it

  • @danf321
    @danf321 7 років тому

    Ben, great help and my rear window works fine from console button but using the key in the rear gate still does not work. Any ideas? Thx, Dan

    • @drcobmx8304
      @drcobmx8304 7 років тому

      D Filice ya same plz help ben

    • @danf321
      @danf321 7 років тому

      I finally fixed my rear window. Problem: Inside console switch worked fine but key did not work. Rear window regulator was fine as were all fuses. I replaced rear gate key tumbler since original barely turned with key, but that did not work. Dealer did not want to trouble shoot the problem so they gave me a referral of a mechanic who did auto electrical work. He fixed the problem which was the wiring harness fot the rear gate. It comes out of gate and travels under the truck and had broken wires due to exposure. Now my key operates the rear gate window.

    • @stancepk8406
      @stancepk8406 7 років тому

      D Filice how much did it cost to fix???

    • @danf321
      @danf321 7 років тому

      Cost was $200 to install my new lock tumbler (which I didn't need), then $350 to trouble-shoot the electrical problem and replace the harness wires. Toyota dealer did not want to attempt this as they warned me it might cost thousands.

  • @robertfromadventuresofrobe335
    @robertfromadventuresofrobe335 6 років тому

    Is it possible that sometimes it can just be caused by a popped fuse?

    • @BenHuttash
      @BenHuttash  6 років тому

      +Adventures of Robert I don't think so, not unless it was one of the main 50 or 60 amp fuses. The problem is almost always in the interlock switches built into the rear wiper motor. Sometimes you can wack the wiper motor and get it to work a few times. Inside the rear wiper motor are two flat spring contacts that limit when you can operate the rear window. They are kind of like Reed valves that drag along a copper contacts. The spring park gets weak and dirty with the wiper motor grease. That is why sometimes you can bring it back to life by moving the wiper blade around.

  • @user-sd6gd7id5x
    @user-sd6gd7id5x 5 років тому

    Hi, I have a problem...My tailgate window shattered, and i dont know the dimension of the window...I own a 2nd gen 4runner , 1993 sr5 v6 3.0
    Please Help

  • @no.me.mires.como.cara.d.pndej0
    @no.me.mires.como.cara.d.pndej0 4 роки тому +1

    👍👍🤙🤙