Be careful with this thought. Locating high frequencies is quite easy and can be done by simple devices. However, this is never the end of the story. Then directly follows the desire to save these measurements as a reference, to classify them with a numerical value and to compare them with another device or after a change with the new measurements... Once started, there are many other wishes that small handheld devices cannot fulfill. Who buys cheap, buys twice. 🙄
The software for HEAD VISOR runs on windows. We ship these measurement systems with a fully set up computer. Then all you have to do is unpack and switch on.
Amazing resolution. AHH, in a cave . this feels close to ultrasonic ranging but its not the same , if you sent out a square wave you could measure all the resonances ? . Fairies can do this, (not send true square waves) but echo locate , winged mobile phones of the future.
Echo effects could cause "ghost" images. Therefore echos are detected and eliminated within our software by their delay. This system delivers results - not just colorful pictures. Feel free to contact us for a free demo on your test objects. Ask here: info@head-acoustics.com
The use of the VISOR in an engine test bench is one of the most common applications. Noises of the high-pressure pump, valves, belt run-out and run-in, etc.... All sources are cleanly separated from each other and their occurrence is shown and evaluated in relation to the crank angle. If you are interested in such sample measurements, please contact us at info@head-acoustics.com. Then we will be happy to show you what is possible. So far, all engine engineers have been enthusiastic about this. 🤗
Did you already have your live demo at your site to get the proof on your test objects? Hence we have just released a new version of the HEAD VISOR. Smaller, ligther, easier to operate and easier to afford. 😁 Just write an email to us so we can meet at your company. It is powerful and fun. cu
Great content, learning makes me happier!
What is the cheapest accoustic camera that works well for locating the sources of high-pitched sounds?
Be careful with this thought.
Locating high frequencies is quite easy and can be done by simple devices.
However, this is never the end of the story. Then directly follows the desire to save these measurements as a reference, to classify them with a numerical value and to compare them with another device or after a change with the new measurements...
Once started, there are many other wishes that small handheld devices cannot fulfill.
Who buys cheap, buys twice. 🙄
Very fascinating!
Soon it'll be affordable to all and then people will start pay attention to noise pollution that comes from household appliances.
Does your sw work on linux or macos?
The software for HEAD VISOR runs on windows. We ship these measurement systems with a fully set up computer.
Then all you have to do is unpack and switch on.
fantastic
Super fun!
perfect
Why is this not used to detect where gunshots are coming from
I'm the military
Because our company does not support mititary activities
Amazing resolution. AHH, in a cave . this feels close to ultrasonic ranging but its not the same , if you sent out a square wave you could measure all the resonances ? . Fairies can do this, (not send true square waves) but echo locate , winged mobile phones of the future.
Echo effects could cause "ghost" images. Therefore echos are detected and eliminated within our software by their delay. This system delivers results - not just colorful pictures. Feel free to contact us for a free demo on your test objects. Ask here: info@head-acoustics.com
Should have shot at an engine bay.
The use of the VISOR in an engine test bench is one of the most common applications. Noises of the high-pressure pump, valves, belt run-out and run-in, etc....
All sources are cleanly separated from each other and their occurrence is shown and evaluated in relation to the crank angle.
If you are interested in such sample measurements, please contact us at info@head-acoustics.com. Then we will be happy to show you what is possible.
So far, all engine engineers have been enthusiastic about this. 🤗
@@HEADacousticsInternational I am very interested in such things but I’d need to see proof it you can actually pick up such precise sound locations.
Did you already have your live demo at your site to get the proof on your test objects?
Hence we have just released a new version of the HEAD VISOR.
Smaller, ligther, easier to operate and easier to afford. 😁
Just write an email to us so we can meet at your company.
It is powerful and fun.
cu