I read in other videos too, people are havin trouble pairing them up. If you're pairing 2 speakers, best have 1 turned on pair it first then go to party mode, and once you tap that sea5ch for 2nd speaker or something, then you turn on the 2nd speaker. I have never had issues connecting two flex, even in manual mode. If you had them both turned on, itll connect one first then disconnect and connect the other one, going back and forth constantly. In manual pairing it's fine having both turned in, but I still do the same step and switch one on first, connect it to your device. Then press the bluetooth and "+" button simultaneously on that speaker until you hear the instruction, then turn on the 2nd speaker and follow that instruction, press the bluetooth and "-" together and hold it until it says its linked. Never failed.
@@charleshyde6461 also remember the key is to do it quickly. Sometimes if the 2nd speaker starts pairing with the device and unpair your 2st device. You just have to do it over again, it means you're a little too slow. To sum it up: Switch 1st speaker on, keep 2nd speaker off Wait for 1st speaker to pair with device Press BT and + on 1st speaker Switch on 2nd speaker Press BT and - on 2nd speaker Press BT and + again on first speaker I missed the last part where you have to place the 2 button again on the 1st speaker after pressing the 2 buttons on the 2nd speaker. That's the part that wasnt mentioned in the manual, that and you have to do it as fast as you can, so have both speakers ready. The last step with pressing both button on the 1st speaker against not be necessary but sometimes for some reason maybe we press the 2nd speaker a little too slow and it will start pairing with your device and you have to start over, so just press the 2 button on the 1st speaker again It takes a few seconds sometimes, for it to say its successfully paired.
Is it better two connect same device(two flex) for better stereo output..or we can get good sound by connecting two (revolve plus and flex)..I already purchased flex..I want bit more powerful sound...so plz guide
Nice review... can we connect old revolve plus (2018) and new revolve plus ll as party or stereo mode??? bcoz am planning to buy new revolve plus Il. Kindly reply.
Hi, I am considering to buy 2 for stereo but I saw a comment about latency especially when watch videos. I usually watch youtube videos, how is the stereo mode with youtube app? Is there any problem about latency? Thank you!
Soundlink flex is slightly better on bass performance, more fuller on all volume level. my revolve plus is 1st gen, i havent tried revolve plus 2，maybe the second gen will have upgraded sound quality. i will do comparison if i have second gen revolve plus.
I have flex and now Im waiting for my revolve+, and you are saying that smaller flex has better bass? Surely revolve + has like at least twice as big driver as in the flex. Normal revolve will have similiar size driver to flex driver but bigger brother definately has bigger driver. So how come flex is better on bass??
@@bodeksrc8007 how is performance after stereo setup...I have purchased flex and planning to purchase revolve plus 2...will it good to pair two different device for stereo output
Nice demo, but it would have been much much better to include the obvious sound test with ONE unit at a time, so the listener has a clear baseline to begin with.
@@nataraju.n I havent tried that yet. for the money wise, if u already have a flex and a micro, it still can provide true stereo while saving money, but for the best performance and bass effect, two flex would definitely be preferred.
@@nataraju.n not sure about significantly better but I wouldnt want to pair 2 different types of speaker, seeing that one would sound different from the other, even if the music is in sync. Question is if that difference js noticeable to you.
Thanks for this! It finally confirms that they can be paired on stereo mode. Now I can finally go ahead and buy the flex to pair with my revolve+.
I read in other videos too, people are havin trouble pairing them up. If you're pairing 2 speakers, best have 1 turned on pair it first then go to party mode, and once you tap that sea5ch for 2nd speaker or something, then you turn on the 2nd speaker. I have never had issues connecting two flex, even in manual mode. If you had them both turned on, itll connect one first then disconnect and connect the other one, going back and forth constantly.
In manual pairing it's fine having both turned in, but I still do the same step and switch one on first, connect it to your device. Then press the bluetooth and "+" button simultaneously on that speaker until you hear the instruction, then turn on the 2nd speaker and follow that instruction, press the bluetooth and "-" together and hold it until it says its linked. Never failed.
You have no idea how long I've fought with that stupid app. Your method worked flawlessly! Thank you so very much for explaining this.
@@charleshyde6461 also remember the key is to do it quickly. Sometimes if the 2nd speaker starts pairing with the device and unpair your 2st device. You just have to do it over again, it means you're a little too slow.
To sum it up:
Switch 1st speaker on, keep 2nd speaker off
Wait for 1st speaker to pair with device
Press BT and + on 1st speaker
Switch on 2nd speaker
Press BT and - on 2nd speaker
Press BT and + again on first speaker
I missed the last part where you have to place the 2 button again on the 1st speaker after pressing the 2 buttons on the 2nd speaker. That's the part that wasnt mentioned in the manual, that and you have to do it as fast as you can, so have both speakers ready. The last step with pressing both button on the 1st speaker against not be necessary but sometimes for some reason maybe we press the 2nd speaker a little too slow and it will start pairing with your device and you have to start over, so just press the 2 button on the 1st speaker again
It takes a few seconds sometimes, for it to say its successfully paired.
Is it better two connect same device(two flex) for better stereo output..or we can get good sound by connecting two (revolve plus and flex)..I already purchased flex..I want bit more powerful sound...so plz guide
Nice review... can we connect old revolve plus (2018) and new revolve plus ll as party or stereo mode??? bcoz am planning to buy new revolve plus Il. Kindly reply.
Bose is number 1 brand for me i love my sound link mini 2 special edition
Hi, I am considering to buy 2 for stereo but I saw a comment about latency especially when watch videos.
I usually watch youtube videos, how is the stereo mode with youtube app? Is there any problem about latency?
Thank you!
Sir, A big thanks….pl tell me whether I can pair bose 600 with Bose sound link flex and use it as a surround speaker
Which has a better sound quality t revolve plus or t flex ?
Soundlink flex is slightly better on bass performance, more fuller on all volume level. my revolve plus is 1st gen, i havent tried revolve plus 2，maybe the second gen will have upgraded sound quality. i will do comparison if i have second gen revolve plus.
I have flex and now Im waiting for my revolve+, and you are saying that smaller flex has better bass? Surely revolve + has like at least twice as big driver as in the flex. Normal revolve will have similiar size driver to flex driver but bigger brother definately has bigger driver. So how come flex is better on bass??
I will have the same setup, even same colour speakers :) 👍
@@bodeksrc8007 how is performance after stereo setup...I have purchased flex and planning to purchase revolve plus 2...will it good to pair two different device for stereo output
I pair my Bose micro and the flex together and it works quite nicely.
Nice
Do you notice the sound difference between the 2 when paired up for party mode?
@@holohulolo for sure. They sound totally different from each other but still sound good paired.
Thank you for the help! I'm a happy camper now :).
Will the 300 speaker connect to the 700 speaker
How many can you add at once? If I had four could I add all four ?
Only 2
I tried to connect Bose s1 pro and Bose sound link mini 2 but I can't give me idea plz
Nice demo, but it would have been much much better to include the obvious sound test with ONE unit at a time, so the listener has a clear baseline to begin with.
Thanks! I try it with my sound link and resolve +
It is easier to connect them in stereo/party mode by the buttons and you don't need any app.
Once my two flex speakers are paired it sounds awesome. However I usually have trouble getting them linked up. Never happens on the first try.
Two speaker linked to create a real stereo sound and is far better than any single one so called stereo.
Can you tell if two Flexs in stereo mode will be significantly better than Flex + Micro in stereo mode?
@@nataraju.n I havent tried that yet. for the money wise, if u already have a flex and a micro, it still can provide true stereo while saving money, but for the best performance and bass effect, two flex would definitely be preferred.
@@funstuffstation9320 Thanks.
@@nataraju.n not sure about significantly better but I wouldnt want to pair 2 different types of speaker, seeing that one would sound different from the other, even if the music is in sync. Question is if that difference js noticeable to you.
what's the name of the third instrumental song at minute 4:38?
last kiss goodnight
Awesome
OK...BUT TOOOOOOO SLOW