Seriously over the top. That said by a man that was heavily into audiophile equipment and recordings during the 70's and 80's. What a beautiful piece of work...a masterful blend of the art of science and engineering.
What about the "needle drop" at 17:10? Look and sound fake to you? That record is filthy and should be popping. Not one bit of surface noise. The needle (stylus) is still not even settled into a groove when the music starts. And the music starts during the lead in.
@@hyperluminalreality1 👍with you 100%. I noticed that music started while needle was still in lead in track. But it didn't register in front of mind...I was still dazzled by the bling of the machine. I couldn't catch the piece of music off the label. Wouldn't be surprised if not the same piece as video sound track. Still quite the machine.
@@hyperluminalreality1 it's a video - the person used the music for effect, agree it would have been better if they used the actual music from the record player. you'll also notice they cut into a later part of the track, that's way farther in the record than the 10 seconds that have elapsed in the video
First of all, love, then desire, skills, tools and resources. There is no failure, in the hands of a master every gramophone will see the light of day. Excellent!!!
This is artistry at its best. The aesthetics. The design. The skill. The quality. The desire to achieve. The passion to get results. So amazing. Sadly I just returned from Seoul else I would have visited the factory and even bought one ❤ Thank you 🙏 for the sheer joy in watching this magical act.
loved how he made each piece and how he made the tone arm that was fascinating ,I am well assured that turntable was very expensive to buy by a yahoo like me
Did he torque, or tighten? A micro torque wrench would add to the craftsmanship. measured correct torque on every fastener. Admittedly unnecessary, like the fake needle drop at 17:10. That record is covered in debris as can be seen. Not one pop and zero surface noise. The music starts when the stylus is still settling into the lead in groove also.
Me either. I agree on the hand craftsmanship. That is why the needle drop at 17:10 is so disappointing. The music starts when the needle is still settling into the lead in groove. The record is absolutely filthy and there is zero surface noise or pops. Not the real time audio.
За то что мужик старается, ему респект! А так это просто самоделка на шестидесятилетних станках с низким классом точности и с большим влиянием человеческого фактора, интересно за какие деньги фанаты LP покупают эти поделки!?
Лох не мамонт, лох не вымрет. Легенду про мастера постигшего дзен в горах Тибета и про смазку для проводов из соплей девственниц и жабьей мочи в полнолуние расскажут и лох расстанется с лишними дензнаками с чувством полного удовлетворения.
A skilled craftsman can compensate for a worn machine , this is not aerospace machining , it just probably costs like it is. After viewing the video, I know nothing about the design principles. For all I know it could be a guy with a machine shop saw a picture of a fancy looking turntable and imitated the looks, because about all I saw was rudimentary machine tools . I would have enjoyed a more complete production, that included how some of the universal design problems were addressed by this machine. doesn't;t really matter to me, I am not in the market , and I'm sure they have many happy customers
Больше похоже на самоделку. Техника безопасности на станке отсутствует лезть руками в перчатке во вращающийся патрон шпинделя на 10:21 и особенно на 11:13, аж нехорошо стало. Затяжка винта 13:51 вообще порадовала. Кругом "тяп-ляп"' и как вишенка на торте - болтающийся тонарм на 14:45, 17:07 и чудовищный перекос иглы на 17:10 которая скоро крякнет на таком проигрывателе.
Istne dzieło sztuki. Mógłbym godzinami przesiadywać i patrzeć na niego, jak działa, jest cudny. To była uczta dla oczu jak Pan budował ten gramofon. Chyle czoła przed Panem.
Красиво и навороченно. Но с точки зрения профи по расточной и фрезерной обработки данный диск имеет дисбаланс. Обкатка центрального отверстия не выдерживает критики, где стойка, где индикатор? Далее четыре отверстия сделаны на,, шармака,, без зацентровки из под сверла. Центровать нужно обязательно, сверло точно уведет в любом рандомном направлении, и лучше потом калибровать отверстия. На предприятии за это точно возврат отк, это в лучшем случае по Н15 и ниже. И конечно должна быть шлифовка поверхностей
Да, как токарь в давнем прошлом тоже могу к ста нюансам придраться. Хотя там только токарка и есть. Ну а фрезеровка вся заказная, видимо, на чпу. С технической и технологической точки зрения - прошлый век. Но сама ручная работа завораживает.
The needle drop at 17:10 is fake.The music starts when the stylus is still settling into the lead in groove. No surface noise on an absolutely filthy record either. That is not music off vinyl. Bad editing and nobody seems to notice or care.
Is it just me but at 17:10 was the cartridge out of parallel to the record surface and did it not jump further out of alignment as it hit the run-in groove?
Sehr schöner Plattenspieler. Jedoch kann ich nicht verstehen, wieso man bei einem so schweren Plattenteller kein invertiertes Tellerlager anwendet??🙄🙄🙄 Viele Grüsse aus Germany
Процесс изготовления продукта ручной работы удевляет мастерство специалиста. Но цена LP ? От стоимости продукта 50% надо заплатить за работу мастеру, 25% стоимость картриджа и остальным должны довольствоваться компани за все ихние хлотаты (сырьё, издержки, налоги, прибыль и т.д.) LP наберает обороты среди любителей качественной музыки. Таких специалистов надо уважать!
This turntable is a work of art and when you see how it is created it is a miracle, congratulations to the creator. But I believe that if the arm was in a J or S shape, visually and acoustically it would be even better, in my personal opinion again congratulations.
Seriously over the top. That said by a man that was heavily into audiophile equipment and recordings during the 70's and 80's. What a beautiful piece of work...a masterful blend of the art of science and engineering.
What about the "needle drop" at 17:10? Look and sound fake to you? That record is filthy and should be popping. Not one bit of surface noise. The needle (stylus) is still not even settled into a groove when the music starts. And the music starts during the lead in.
@@hyperluminalreality1 👍with you 100%. I noticed that music started while needle was still in lead in track. But it didn't register in front of mind...I was still dazzled by the bling of the machine. I couldn't catch the piece of music off the label. Wouldn't be surprised if not the same piece as video sound track. Still quite the machine.
I have no clue about audio technology and must say that I'm very impressed by the accuracy and skills of the master
@@hyperluminalreality1 it's a video - the person used the music for effect, agree it would have been better if they used the actual music from the record player. you'll also notice they cut into a later part of the track, that's way farther in the record than the 10 seconds that have elapsed in the video
First of all, love, then desire, skills, tools and resources. There is no failure, in the hands of a master every gramophone will see the light of day. Excellent!!!
Das ist ein wunderschönes und tolles Gerät einfach nur traumhaft
When I start watching this video,I watch it all the way to the end.This man is master of engineering, beautifully craftsmen in turntable.
amazingly hand build from the ground up by himself, he got my respect.
This is what you can call a record player...fabolous work!
This is artistry at its best.
The aesthetics. The design. The skill. The quality. The desire to achieve. The passion to get results.
So amazing.
Sadly I just returned from Seoul else I would have visited the factory and even bought one ❤
Thank you 🙏 for the sheer joy in watching this magical act.
류대표님 반갑습니다
대표님이 만드신 턴테이블 사용 잘하고 있습니다
훌륭합니다
우리나라에 이런 장인분이 있다는데 큰 자랑입니다
loved how he made each piece and how he made the tone arm that was fascinating ,I am well assured that turntable was very expensive to buy by a yahoo like me
Very nice to add the strobe markings on the platter. ALL hi-end tables should have them!
That's amazing !
Amazing how talented some people are.
Nothing better then hand made
This is no exception to the rule
A true master
Приятно смотреть на работу.
Now that is a phonograph. Great job!
That is just brilliant engineering - love the way everything is hand torqued thanks for sharing 👏🏻👏🏻👍🏻
Did he torque, or tighten? A micro torque wrench would add to the craftsmanship. measured correct torque on every fastener. Admittedly unnecessary, like the fake needle drop at 17:10. That record is covered in debris as can be seen. Not one pop and zero surface noise. The music starts when the stylus is still settling into the lead in groove also.
Так захватывало дух, что чуть не задохнулся. Это нечто!!!!!!!
A very stylish player
The combination of carbon and steel is brilliant.
Makes me want to get one of these.
I bet it not affordable for main of us...
@@mari0auseva That's for sure Mario .
Costruirsi le cose da se, non ha prezzo. Bravissimo.
Nice craftsmanship that has resulted in a cool record player, worthy of admiration
Nunca Ví algo asi. Que nivel de excelencia. Saludos desde Guatemala
Uau!!! Isso não é um toca-discos. É uma obra de arte 😊 👏🏼👏🏼👏🏼👏🏼👏🏼
Fascinante el trabajo de este señor , son obras de arte, felicitaciones Sr. 👍💯👍🙏🇨🇱🍷
this is a master... remember my granfather... he work like this handkrafter
офигеть, это целый станок получился.
Piece of art !!!!! BRAVO
Absolutely amazing! I couldn't take my eyes off it.
Me either. I agree on the hand craftsmanship. That is why the needle drop at 17:10 is so disappointing. The music starts when the needle is still settling into the lead in groove. The record is absolutely filthy and there is zero surface noise or pops. Not the real time audio.
바늘이 닿고 현의 소리가 퍼질때 진심으로 박수를 치고 말았습니다.
알루미늄 주물가공 플레터라 드릴작업하니 부스러지면서 깍이네요..^^
저도 제품 사용자지만 제품의 장단점이 있습니다.
아쉽지만 가내수공업 이상 발전하긴 힘들다고 봅니다.
За то что мужик старается, ему респект!
А так это просто самоделка на шестидесятилетних станках с низким классом точности и с большим влиянием человеческого фактора, интересно за какие деньги фанаты LP покупают эти поделки!?
Лох не мамонт, лох не вымрет. Легенду про мастера постигшего дзен в горах Тибета и про смазку для проводов из соплей девственниц и жабьей мочи в полнолуние расскажут и лох расстанется с лишними дензнаками с чувством полного удовлетворения.
Правда что ли?) И как же в данном случае человеческий фактор и класс станков может повлиять на конечный результат?
A skilled craftsman can compensate for a worn machine , this is not aerospace machining , it just probably costs like it is. After viewing the video, I know nothing about the design principles. For all I know it could be a guy with a machine shop saw a picture of a fancy looking turntable and imitated the looks, because about all I saw was rudimentary machine tools . I would have enjoyed a more complete production, that included how some of the universal design problems were addressed by this machine.
doesn't;t really matter to me, I am not in the market , and I'm sure they have many happy customers
Amazing skills another lost art
3:10 탭핑 오일을 뿌리시면서 뚫으세요
탭핑 오일이 없으면 찌꺼기가 많이 붙고 발열이 심해지고 구멍 주변 부분이 파손됩니다
This was absolutely outstanding
Have a good day. God bless everyone.
Simply amazing what a work of art
what we really need are new Lathe Cutting machines. Everyone is using the old lathe machines.
What we need is money to buy them. Anyway the work gets done right? 😎
Some of the best lathes, mills, etc are the old ones. Build so robust. Machines from the 40's and 50's where built to last forever.
@@xtrck yes, but they are hard to find and some are not in working conditions.
Wonderful work of pure art
핵심부품외에 수공업으로 할 수 있는 부분들을 럭셔리하게 꾸며서 부가가치를 창출하는 분야군요.
하이파이 팬들에게는 충분히 어필될만한 사업이라고 생각합니다.
Respect from India excellent
Ну токарь и фрезеровщик знатный!😉
Больше похоже на самоделку. Техника безопасности на станке отсутствует лезть руками в перчатке во вращающийся патрон шпинделя на 10:21 и особенно на 11:13, аж нехорошо стало. Затяжка винта 13:51 вообще порадовала. Кругом "тяп-ляп"' и как вишенка на торте - болтающийся тонарм на 14:45, 17:07 и чудовищный перекос иглы на 17:10 которая скоро крякнет на таком проигрывателе.
Всё для развода лохов, которые до сих пор считают, что просветлённый мастер и сопли девственниц могут больше чем прецизионные станки с ЧПУ.
P.S.
В догонку. На 0:11 нормальная такая шербина под тонармом. Не выбрасывать же! И так сойдёт!!
Тоже удивился тонарму и кривизне головы
Flawless in every move.
Как видимо счастлив этот дядька...
A good job of a Мaster for joy...
Фантастика! 👍 👍 👍
Круто, настоящий мастер.
Вот это красота! Щидевр!👏
Istne dzieło sztuki. Mógłbym godzinami przesiadywać i patrzeć na niego, jak działa, jest cudny. To była uczta dla oczu jak Pan budował ten gramofon. Chyle czoła przed Panem.
He is living my dream life.Having a over the top stereo system and making turntables for a living.Omg what a life
Excellent Engineering, womderful longlife a unique product in the field of music.
Amazing and Incredible! 😲
I guess being belt driven doesn't matter when you have a gigantic flywheel.
What a beautiful pice of art wish I could afford one
Μπράβο-μπράβο!!! πολύ καλή δουλειά, very-very good video bravo!!! fantastic. From Athens Greece (🇬🇷)
대단하십니다
Красиво и навороченно. Но с точки зрения профи по расточной и фрезерной обработки данный диск имеет дисбаланс. Обкатка центрального отверстия не выдерживает критики, где стойка, где индикатор? Далее четыре отверстия сделаны на,, шармака,, без зацентровки из под сверла. Центровать нужно обязательно, сверло точно уведет в любом рандомном направлении, и лучше потом калибровать отверстия. На предприятии за это точно возврат отк, это в лучшем случае по Н15 и ниже. И конечно должна быть шлифовка поверхностей
Да, как токарь в давнем прошлом тоже могу к ста нюансам придраться. Хотя там только токарка и есть. Ну а фрезеровка вся заказная, видимо, на чпу. С технической и технологической точки зрения - прошлый век. Но сама ручная работа завораживает.
A master piece turntable wow
I'm no audiophile, however I do love my LPs and I found myself holding my breath, in awe, at times.
The needle drop at 17:10 is fake.The music starts when the stylus is still settling into the lead in groove. No surface noise on an absolutely filthy record either. That is not music off vinyl. Bad editing and nobody seems to notice or care.
maitre de la hifi fait main !!! bravo !!! superbe travaille !!!
В ж... станки, с програмным управлением. Вот до революционные - это класс!😂
Well, it's just music. It's worthy of a museum.
great craftman
Гений.
Простой фетишь! Я бы не стал переплачивать за ручную работу. Если бы захотел нечто подобное, то скорее бы всего сделал это сам!
καταπληκτικό!! μεθοδικότητα απο την αρχη μεχρι τελος!!
Heavy machine ! Excellent
До чего же круто! Невозможно оторваться от просмотра.
Marvelous! Thank you.
INCREIBLE FELICITACIONES A ESTE ARTESANO DESDE CHILE MARAVILLOSO
Superb!!! I wish I can afford to buy one.
quelle beauté , du grand art
개멋있다!
CNC.선반 mcT가 넘처나는 이시대 범용선반 밀링으로.
수작업이라 대단하십니다.
범용으로는 조도나 정밀도 한계가 있지 않나요.....
암튼 번창 하세요~~^^
Beautiful craftsmanship.
Really? Are you a machinist or a toolmaker?
In some ways this guy is a butcher.
This is coming from a fifty year precision machinist/toolmaker.
All the amazing engineering they did was it to much to ask the editor to have the music come in once the needle was off the lead in track
Great craftsmanship.... but too high end for me , I'll just continue to use my 1960's magnavox...
Мастер. Здоровья тебе, человек
Pure joy to watch
у меня упала челюсть .вы большой молодец отличная и красивая работа.
Sure beats the Fisher Price record player I had as a kid.
Monstrueusement magnifique !!!!!
Thankyou. Wonderfull.
Mind boggling
He’s not a craftsman he’s a genius
awesome
엘피판이 원이자나요 원이면 안쪽으로 들어갈수록 원주가 작아지고 속도는 줄어들탠데 음악이 느려지거나 빨라지는 그런현상이 있을거같은데 어떻게 보정을하나요? 모터 속도 보다는 엘피판 의 소리내는 간격이 달라지는건가요?
merci pour la musique ....thank you for the music ....
и цена как у самолета.... ЧПУ сделал бы и точнее, и быстрее, и лучше...
Is it just me but at 17:10 was the cartridge out of parallel to the record surface and did it not jump further out of alignment as it hit the run-in groove?
Só a agulha desse Turntable Master já é uma dificuldade pra comprar.
que dimais.muito proficional caramba.muito lindo parabéns.amei valeu abraços sucésso..
Sehr schöner Plattenspieler. Jedoch kann ich nicht verstehen, wieso man bei einem so schweren Plattenteller kein invertiertes Tellerlager anwendet??🙄🙄🙄 Viele Grüsse aus Germany
아이리스 잘 사용하고 있습니다
Massimo from Italy . Beautiful ! A true work of art! Is the arm unipivot? Compliments !
одноопорный тонарм, лучшее из решений!
it's perfect.
Nice video, keep it up, thanks :)
Super super super 😊😊😊
Nice mechanical design, but I would prefer direct drive with feedback balanced needle system.
Процесс изготовления продукта ручной работы удевляет мастерство специалиста. Но цена LP ? От стоимости продукта 50% надо заплатить за работу мастеру, 25% стоимость картриджа и остальным должны довольствоваться компани за все ихние хлотаты (сырьё, издержки, налоги, прибыль и т.д.)
LP наберает обороты среди любителей качественной музыки. Таких специалистов надо уважать!
Красная цена подобной конструкции 100$.
perfect👍👍👍
Вы маэстро 👏👏👏👍👍👍
WOW!
This turntable is a work of art and when you see how it is created it is a miracle, congratulations to the creator. But I believe that if the arm was in a J or S shape, visually and acoustically it would be even better, in my personal opinion again congratulations.
Obra maestra sin duda