How to cut off backup lights on the back of the cab when the power is off and every 1520 minutes that comes back on with the power off, what can I do to?
@user-wq3ld7con9n when you connect the positive wire then as you put the screw in the cab that will be the ground and you should be good to go and your welcome
@ Haskel Bailey yes I did well as you connect the power line and as you screw it in to the cab they will be your ground the screw will ground from the cab
@Dates with weights yeah you can just a tip I learned whenever you go over a scale weigh station turn them off lol then back to action after you leave the weigh station
@robertfrank676 that’s nice how many you put ? What color ? I had the same issue just have to tuck it slowly and tighten the screw slowly let me know if that works
There the RED ones not the Clear ones I used Heat shrink ones for the ground same for the power wires. that have the circle ends and stuck the screw through that than to the truck of the sleeper but I can’t get them to ground worth a shit
@polo what’s up polo yes just drill them out carefully and after you remove the whole light from the cab put some stainless steel rivets and that should do the job
The power is off on my cargo lights on the back of the truck but the keep coming on and draining the battery out
Been thinking about selling my flat top KW and buying me a mid roof T660 bro and you’re pushing it, looking clean
@18 Rollin appreciate that
I hope this is not a crazy question so you don't have to hook up the black wire.
@@alfredrevis1876 lol you are right the screw that holds the light will be the ground and that’s not a stupid question
Thanks a million I'm wanting to put some on my 379 you have a nice looking truck thanks again
@@alfredrevis1876 appreciate that man shot a pic of it as soon as you get it done and hit that subscribe button stay safe driver
I have a 2006 international pro. Store automatic.
How to cut off backup lights on the back of the cab when the power is off and every 1520 minutes that comes back on with the power off, what can I do to?
Disconnect battery
Nice Bro you got it down 👍🚛🙏
@ El compa Edger thanks bro appreciate the feedback 🙏
Do you put the ground wire in between the cab and screw or does the ground wire need to be completely taped? Thanks in advance!
@user-wq3ld7con9n when you connect the positive wire then as you put the screw in the cab that will be the ground and you should be good to go and your welcome
The wires Pinching on mine how do I run the ground wire?
Hey g so I’m trying to install same ones you did but the trailer I’m working on has a neutral
What do I do with the white one
Nice Kw 🔥. Do you have a link to those lights ?
@Treasure Hauking Thanks man and go to castaic chrome shop they got a website
Did you not have to use a ground for the light?
@ Haskel Bailey yes I did well as you connect the power line and as you screw it in to the cab they will be your ground the screw will ground from the cab
Can you have blue sleeper lights instead of amber?
@Dates with weights yeah you can just a tip I learned whenever you go over a scale weigh station turn them off lol then back to action after you leave the weigh station
I just Installed mine and the ground wire is Being pinched from the truck how do I stop it from doing that??
@robertfrank676 that’s nice how many you put ? What color ? I had the same issue just have to tuck it slowly and tighten the screw slowly let me know if that works
There the RED ones not the Clear ones I used Heat shrink ones for the ground same for the power wires. that have the circle ends and stuck the screw through that than to the truck of the sleeper but I can’t get them to ground worth a shit
I put 2 in driver and passenger side that’s all my truck has
@@robertfrank676 give me a few minutes I think my buddy had the same problem I’ll get back too you
@@Bythemile18speed Ok sounds good thanks let me know please
this guy scares me
@kenverrilll4205 don’t be scared
I’m trying to figure out where do you connect other wire ground
@Damir Avidic yeah it can get weird with the ground wire when you screwed the light in did it turn on at all ?
@@Bythemile18speed no it did not I’m not sure what to do with ground wire
@Damir Aveic okay that’s weird check behind the light and shave the paint off a spot and the cab and try to screw into the cab with a small screw
😎👉 - - -💥 Thanx!
Welcome bro
my bolts spin any ideas to remove it
@polo what’s up polo yes just drill them out carefully and after you remove the whole light from the cab put some stainless steel rivets and that should do the job
how long is your wheel base
@ Bonita Express It’s a290 bro
@@Bythemile18speed Thanks am trying to stretch my classic and i think i will go with 290
@Bonida Express any time man and damn that’s gonna look clean 🔥
@@bonidaexpress who do you go to , to get a truck Stretch?
@@truckloads425 a guy shared a contact in Houston TX will contact when i get ready
Orale 3 puntos like spider 🕷
@CentroValle209 lmao 😂
Anybody knows where is the fuse for these bunk light.
@azadvirmave2347 check under the hood by the driver side the fuse should be there 👍
@@Bythemile18speed thanks bud
@azadvirmavi2347 anytime keep on trucking