Cort X700 Triality Guitar Deep Dive Series
Вставка
- Опубліковано 14 лют 2024
- #knowyourgear
We are giving a guitar away! Learn more and enter to win here
knowyourgearpodcast.com
Video on intonation
• How To Intonate Your G...
Link to Cort guitars
www.cortguitars.com
Patreons saw this video days ago and gave feedback to make it batter. You can to on the next one. Sign up for Patreon
/ phillipmcknightkyg
Links to tools in this video
Fret action gauge
Digital Calipers
The New Merch is finally here!!!!!!!!!
www.kyg.altacolor.com
Join me on Instagram
/ phillip_mcknight
Join Know Your Gear Facebook for other videos and posts
/ knowyourgear
Want to have your product on an episode ? Contact us here
mgclessons@gmail.com
Check out the Know Your Gear Podcast
iTunes: smarturl.it/KYGitunes
Spotify: smarturl.it/KYG-Spotify
UA-cam: smarturl.it/KYGyoutube
iHeart Radio: smarturl.it/KYGiheartradio
I’ve a Cort G200 found in a charity store, it must be 20 years old, one of the best necks of any guitar I’ve played.
So going off of my Squier Mustang, which was made by Cort at 37 inches, Cort in 50 years has made enough guitars to wrap around the Earth 18,003 times end to end
I wonder how flat earther would measure that
Holy sht...
@@RalphPacheco2 They would measure it in revolutions around the "Great Ice Wall" that prevents us from falling off the edge, obviously.🤣
Cort has come a long way since I got my first electric guitar in 1976. It was a Cortez Les Paul copy with a bolt-on neck. If my mind is not failing me, Cort was manufacturing in Japan at that point in time. Back then, Cort/Cortez was primarily a line of guitars aimed at students. It was below the lawsuit Ibanez copies, which were targeted at gigging guitarists. People have to remember that a new Fender Stratocaster cost $450.00 at that point in time. That figure adjusted for inflation is equal to $2,425.00 in 2024 dollars and seventies Stratocasters left a lot to be desired.
I cannot get my head wrapped around Millennials and Zoomers complaining about the cost of Fender and Gibson guitars today. They have never been cheaper. A Les Paul Standard cost $700.00 in 1976. That figure is equal to $3,774.00 in 2024 dollars, which is pushing upwards toward the cost of a new Gibson Custom R7, a significantly nicer guitar than a 70s Les Paul. Most guitarists had one guitar and one amp. Guitar collections were for rock stars or older guitarists who collected and played them over a lifetime. I had at most two electric guitars and one amp the entire time I was a gigging musician. The second guitar was usually a cheap import that was used as a backup. To get a new guitar, one had to sell or trade one's old guitar. The fact that Niles Rodgers recorded $500,000,000.00 worth of music using a single guitar does not seem strange to older guitarists like me.
If Cort offered this model with a Floyd and a locking nut, I would order one today. I have been looking for a replacement for the '92 HSS Ibanez Prestige S540 that I foolishly sold in 2019 after owning it for 27 years. Ibanez no longer offers a Prestige Saber series guitar in HSS format, which is shortsighted in my humble opinion. An HSS Super Strat is the most flexible platform in the world. I played everything from shred to jazz on that guitar. You should have seen the looks on the faces of blues lawyer wannabe guitarists when I pulled that guitar out of the case at a blues jam. They were priceless. It taught them to never confuse technology with technique.
That’s why I always laugh when young people today grumble about how a 58 Les Paul was ‘only’ 295.00 brand new, that was a whole months pay back then, not cheap…
I don't know any millennials in real life who have said "guitars were cheaper back in the day" and I'm an ex function band player so have played with a bunch of dudes! Most people just got what they could afford and either set it up or got it set up and did their job. The only thing they all complained about was house prices 😂 if anything the most common mention around guitars was "hey this cheap guitar is really good" or "CNC is getting way too good" a lot of guys play squiers and epis and keep their fenders and gibs at home bc the average punter just enjoys the music not the name on the headstock! So yeah I think on the Internet a few loud opinions shape your view of whole generations. We gotta stick together as axe guys and pray for the budding musicians of gen z and a, with covid stunting their live shows and AI music already here I worry they will have a tough time without encouragement!
Great review Phil! I appreciate the amount of effort you put into these and your playing as well!
Banjo caught be off guard. Absolutely hilarious. Bravo!
Great overview of a great instrument! I have an X700 Duality and it's a beast of a guitar. Plays as nicely as my USA Jackson SL2H. Really hard to beat these Corts for the money.
thats impressive, very impressive
Yeah those multiple piece necks are def the star.of the show for me. Ive seen.those on newer Aria pro 2 guitars as well and its the way to go man, combined with a spindle trussrod.
I believe, Phil, you have been practicing your chops! Excellent 5-position demo for all of us. And thanks for all your Know Your Gear knowledge! _R
Precision is up to the maker and they make some fantastic imports. But how did they get it to sound like a banjo? Now I'm really intrigued.
Awesome playing Phil. Great guitar too.
They've been around a long time. Great quality for the money.
Phil I know the video is about the Cort... But I couldn't stop staring at that beautiful tangerine Parker Dragonfly! Just watched the video about how you acquired it and as a fellow Parker fan/owner myself, congrats on finally getting it.
Cort had a Matthias Jabs signature model at one point
Nice review Phil. How thick is the body? The light wood around the perimeter makes the body look very thick. Thanks for all u do!
Thanks for the great review as always! I've owned several Corts and still have a G290 Fat. Great guitar.
Wow! I remember about 20 yrs ago, they got a bunch of signature guitars including Larry Correll and Hiram Bullock. Amazing they are offering same specs as a 3G Suhr!!!!!!
Absolutely love the music for the fret test!
I bought a cort bass in 05. It’s pretty good. Did the truss rod recently and it all worked. It’s just active, which annoys me. But good construction, can vouch for that
Love the shop! Very organized! : - )
Love the new shop/studio setup. Makes the deep dives feel more organic.
Hey, Phillip. first of all, thanks for the video, and all you do to keep us informed on new guitar releases. Now the next thing: Where did you get that guitar? Directly from Cort, or from a shop? I think you're in Arizona, and will be in state this coming weekend (lived in Arizona most of my life...). If a shop there has it, I would really like to check it out if it is in the Phoenix area. Regardless, thanks again for your videos, and hope you and yours are doing great.
Phillip, thanks for all the great content!
They make pretty good guitars. QC is awesome. Their factory also makes guitars for other brands too. Highly recommended.
Cheers from NZ 😎🎸🤘
I don't have any Cort basses, but I have a few that were built by Cort, the best one being a '97 DeArmond jet star deluxe made in Korea, fantastic shortscale with loads of style
I'm glad you havent had any QC issues but I have had multiple guitars with finish or QC flaws from them, all got sent back
@@milotin2755were they all Cort branded? Just curious, I've been looking at the offset Tele.
@@milotin2755 sorry to hear about that.
The first bass I ever played on was a Cort... I was the worst of three guitarists, so I borrowed our drummer's Cort bass, and that is what I learned on. It felt like a pretty nice instrument, especially to start on.
Actually a time-honored company. Produced many fine instruments, some with name labels on them. Produced some junk, you'll know it in a minute. But that's what their customers ordered and paid for. Some with name brands (lol).
@@camilo1455 All in all, I remember it in a positive light, I started guitar at 12, bass at 13.
I'm a huge Ibanez fan (I have 7 RGs and an SR405EQM 5 string bass), I've heard that Cort has made Ibanez instruments before, I could be wrong, though.
Phile, love your playing.
I like those pickups!
That mid pickup, and even more so the intermediate position of mid + split coil bridge pickup sound absolutely FANTASTIC!
👌🏼
The bridge pickup... hmm, not so much, for my ears, not chimy enough and no low end depth.
And that trem system works GREAT!
Not sure the shape, colour combination and headstock shape are up my alley, but would be curious to know the price of this one.
Cort is an amazing value and often amazing instruments brand, have a couple of acustics, a bass and a Hiram Bullock signature open pore electric that are very good, and unbelievable for the price.
👍🏻
I always try to get my neck perfectly straight with no string tension, then the tension will pull it in to give it the slightest bow, which is basically perfect imo
Considering they build 'stuff' for pretty much 'everyone', I would be willing to bet more folks own one of their products than not. Quick inventory, I have two guitars built by Cort.
Yeah Cort has been around a loooooong time and has made guitars for most brands. Definitely in the past 20 or so years
Great job Phil. Very interesting guitar. Thanks
I'm amazed at the high's and how well it's built. I may have to have one now !
I have to say Ibanez did an amazing job putting usable floating trem. systems on their less expensive guitars this last year. I just bought their SP3- the Kiko L. signature model that runs about 500-550$- and you can dive bomb it- and it holds tune. I usually stay away from floating trem. on anything under 1000$- because usually that's about what you had to spend to get one that wasn't a major headache. But I'm really impressed with this SP3- the fret work was bad- lots of fret sprout, no polishing, and the ends of the frets had burrs on them. But it intonates really well, the trem. works, it holds tune, and it sounds and looks great.
Thats gorgeous . The headstock looks very Ibanezy .
I wish you used that Supersonic for more demos. Such great sounding amplifiers!
I slide an American quarter (1.75mm) under the last 2 frets. This is a great starting point.
Depending on the radius, this is usually perfect action for guitars. For bass or extremely large 7th, 8th or 9th string on the guitar, sometimes an American nickel (2mm) is more appropriate.
That is way too low for me. One ends up having to smash the strings down on the neck with action that low and getting enough meat under a string to bend can be very difficult. Buzzing is also a problem when playing aggressively because strings vibrate in an elliptical pattern, making setting relief a nightmare. It is better to work on grip strength and dexterity.
That’s one of the nicest guitars I saw for a very long time. How much does it cost and where can I get it?
Such peaceful intro music 🎵🎶
The pickups sound great! So does the banjo! LOL I would have to do something with that finish. I'm really not that fussy, it just looks unfinished to me. For set up, I think PRS is the gold standard. Every one unboxed, checked/adjusted, sent on. For the rest, I give them a pass on minor adjustments. You just have to have your setup checked, check it yourself, or buy a PRS. I just don't think a guitar that has been inside a container on a ship for who knows how long can be expected to hold its perfect setup. I think Sweetwater checks setup on >$400 guitars too now that I think about it. The rest, it is what it is. 8) Peace --gary
Cort's stuff is really good for the price, especially the lower midrange "sweet spot" priced guitars. Sometimes certain models are hard to find even on the internet though
I forgot to mention that I love the new banjo fill lol. Well done
Man, I respect Cort, but that looks like they forgot to finish painting it!
Ive wanted a Cort Curbow bass for years . The mark 1 with the Bartoloni pickup . I had a chance to buy one for 100 bucks a few years back . The girl selling it said she would get in touch as she was going on holiday to Spain and would message when she came back . She never did , and never answered her phone .
Sounding good, Phil!
Wow that guitar is so gorgeous!
best banjo picking of the day
🙂
I've come to learn that roasted maple necks is a marketing gimmick. It's a cost savings boon for manufactures, whereas they can use higher kiln temps to drastically speed up curing time. As a result, they can get away with sourcing wood from younger trees and not have to let blanks sit stacked and stickered in a warehouse. Also, the finishing process is much simpler. I've A/B compared a lot of different guitars with different wood combinations over the decades. Roasted maple necks sit in the mix differently. To me, it sounds like the notes have less bounce and bloom.
I had a Cort Flying V back in the day…It played well.
Great review as always Phil
Does the push pull split the coil, or use the single coil voice 3? It would be odd to put a new set of open core in and use the push pull to split it.
I have two Cort guitars but one of them has an LTD on the headstock and the other has PRS SE on it. Regardless of what name they put on the headstocks Cort makes great guitars.
How much does it cost Phil???
$800-$900 range
This is cort no 1 flagship. US $1500 on singapore guitar shop. I don't know in US price tho...
I will quote Phil...."Any guitar of any quality at any price point can be made anywhere in the world"....thanks to the CNC machine and other modern guitar manufacturing techniques. It would be interesting to see how many turn their rises up at this while simultaneously owning a guitar made by Cort.
@@IDGAF_PLUS CNC machines are not particularly good at doing fret work or leveling (unfortunately) and a lot of hand finishing still needs to be done to properly deliver a good product. I like CorTek and have never had a problem with the idea of owning a Cort guitar, but it's not like you aren't getting what you pay for if you get a professionally finished Japanese/Korean/American guitar in the $1400-1800 price range (Vola, Ibanez, Schecter Korea, Cort's more expensive Korean line, Kiesel, etc.)
@@ryanh7167True, but the CNC takes out a ton of work. I have Schecters and PRS SE's and they are Cort made and fabulous. What you get for the money smokes the competition.
How do you play so fast and what pedal are you using to make this guitar sound like a banjo? In all seriousness (and a little tongue-in-cheek), thank you for the great commentary. This seems like an interesting instrument... and it'll be interesting to see where Cort goes from here and how everyone and the market reacts. All the best!
Beautiful instrument!
Around 5/64ths give or take 1 or 2 64ths. All electric guitars. Simpler to remember and 64ths rulers are sold at all hardware stores. No don't take the nut out of the equation when checking string height. But do capo first fret and were the guitar meets the body to check neck relief. You can do it with two hands . You want a little bounce off the 7th fret . Or you want it dead straight and need to worry about back bow. Tell my students "You want a dirt bike that can go off jumps or you cruising highways?"
Well ... Metric would be SO MUCH easier ....
For you. Metric is not my standard or is Fenders. Martins or Gibsons. We mention it for Europeans. We buy Gallons as well.
Is it just me, or do the pickups and bridge stick up higher than normal from the body? Looks weird with the chrome bridge and stark white single coils against the beautifully stained body. They need to dial in the colors a bit. Some really great parts and ideas, but it seems a bit hodgepodge. Lots of potential there, if somebody could clue them in a bit on layout and specs compatibility. Can you imagine the unlimited parts available in that factory? Must be mind blowing. I just bought 2 inexpensive guitars built in that factory. PRS SE McCarty .594 singlecut standard in vintage cherry, and a Yamaha Revstar Element in black. Two of the absolute best values in guitars right now.
I love it
@@snicker576 It's got potential, little rough around the edges.
@@andrewbecker3700 It just comes down to taste. My favorite guitars are 60's Japanese guitars, they're all rough around the edges. Can't stand picture perfect guitars, most have no character or quirks and play the same
Those are Cort-made, huh? Learn something new every day..
Looks a little off...
1:25 Kiesel guitars don't rock veneers but yes you are correct about the Ibanez, Kiesel Aries has a full(wood of choice)cap.
Right on.
WIDE neck baritone in the works, by any chance? i think i might need this more than a third of the new hooky viking bass ;-P
I had a Cort strat 25 years ago- it was a great guitar
I tried a Cort Strat style guitar. It was really good, but felt like slightly cheaper materials. This one looks excellent.
Cort makes everything from super cheap to stuff well over $1,000. I have found that the stuff in between those prices is a sweet spot for them but the expensive Corts are on par with literally every other guitar $1,000-$2,000 because Cort probably makes every other guitar in that price range themselves hahah
Well I'll just be doggity. Phillip made that Cort sound like a banjo. 😀
I know this is a noob question, but what is the digital timer in the background? Great vid Phil. Love Cort guitars.
It is a decibel meter, it measures sound.
It’s a db/spl meter. So basically how loud
One of the best players I ever knew started with a nice Cort, all the way back around 1987. Wow 24,000,000. The population of Australia is 26,439,111 lol. That's a lot of guitar players for a less well known brand of guitar. I've never owned one but I do appreciate them. I really like the look of that one you're working with too.
If you are talking about the 24,000,000 guitars, I'd bet you have owned one (assuming you haven't had only the same one guitar for the last 45 years). Ever hear of Ibanez, Squier, G&L, Gretsch, Laguna, Avalon/Lowden, Music Man, Schecter, Lakland, Strandberg, EVH, Chapman or Jackson? If it was made in Indonesia, it was probably built by Cort.
A .30-caliber ammo can as a toolbox...
Phils Army side is showing through. 😎
Hahahaha between my Uncle and my Dad and my Pop there are probably 1,000 of them around full of whatever
Great review Phil, those Fishman pickups give some great clean tones but that finish is a big distraction and definitely not for me. It looks like it’s in the process of being sanded down for a refinish!
Hello Phillip..just curious. If they're ACTIVE pups, WHY the shielding in the cavity? I was informed that with actives, shielding wasn't necessary (along with the ground from bridge to cavity). Reason I'm asking is because im building a LP style kit, and am using a EMG Heavy 73 RetroActive set, and have elected not to paint the cavity. Is there an advantage or disadvantage in this situation?
I got a Cort X-6 for $100 used a couple months ago. People were clearing some stuff out and it had been sitting in a corner because the guy won it at a raffle but didn’t play so was basically brand new. I bought thinking I would flip it and couldn’t turn lose of it.
Does the voicing push pull pot not change the voicing of the single coils as well?
What the story behind the PRs singlecut hollow body with piezo?
Cort is such an underrated guitar. They are super cheap, and damn well made for a freaking faction of the price such as, say Ibanez.
Especially since they very likely make most of Ibanez' guitars. Not 100% sure on that but they make a lot of companies guitars for them
I have a PRS SE made in the Cort factory it’s as well made and finished instrument as I have ever seen at this price point.
How likely are you to play the note at the 22nd fret of the low E string?
It almost seems like the push-pull pots and selector switch are disconnected; the guitar sounds nearly the same in every position.
That sounds amazing dirty.😉
....what wall mount is that for the Strandberg?
I worked for Cort back in the mid 2000s with the Westheimer Corporation and we were never allowed to mention that we built guitars for other companies, now they brag about it. Funny how things change. 😝
I bought a g 300 raw and a razer blade … first thing
I did was remove the logo From the head Stock … reason , well It has a mohogany Body , walnut top ( not a veneer ) 1/4 inch top i guess , chambered body , graphite nut , stainless frets , 24 frets , locking tuners , their replica of a gotoh trem ,
Compound radius neck 12-16 , as well that shape like music man uses on evh model .. watcha call it .. i paid $500 bucks new - has the vibe of Nuno s Washburn N4 - raw body and neck ow and Duncan pick ups … jb and jazz … I mean this is what you get on a 3k guitar like my music man Axis … hella guitar and all 5 positions sound fabulous
Thanks
The volume is weird in the video, in parts when you're talking in the room, as in the first minute and 15 seconds. It's a bit quiet and the right side is clearly more quiet. Listening on headphones here. The voice-over is fine.
How does the Fender 60s neck shape compare to the modern c?
Is that the amp distortion from the fender? Thats pretty aggressive
I wondered, what happened to the kid Deliverance?
24M guitars 😮😮😮
I didn't know any manufacturer had ground out that many guitars.
Ibanez was doing this look at least as early as the Iron Label series, which may have carried over into some of the Prestige models of 2020. Really reminds me of those, but five years later for some reason! These and the Duality are great looking guitars. I think Cort guitars might foster a greater appeal for these if they came up with their own branding that wasn't their name. Hard for me to get excited about buying a guitar called "Cort" with a boring logo that looks like it's painted on. Give me some MOP inlay with a cool sounding name! I know, it's trivial, but it's keeping me from adding one of these to my collection.
GReat looking guitar! I have a Cort LP "style" guitar. Absolutely love it! Chose it over a Gibson LP for quality and playability!
Seriously??? Cmon u mean a bolt neck for Price.
@@Allguitarinfo What bolt on neck? My Cort LP is a set neck dude! At least know what you are talking about eh! Jeeze!
❓️❓️❓️Hi Phil and community. Does Cort make any Offsets and Short Scale guitars at this nice level❓️❓️❓️
That high 22-fret on the low-E string would be like if Cindy Crawford had a mole on her face -oh, WAIT . . . !
thats a thick fella - talkin bout the guitar
Have you ever evaluated a Parker Fly classic?
So... 4 guitars per citizen in my country. Got it!
What model Cort is that?
Wow, SS frets.
Hmmm, I'm interested.
They finally updated their headstock logo!! I swear the old logo was holding them back!
The new logo is definitely more modern and fits the aesthetic better but there's a certain charm to the old one too.
13:56 Better Call Saul
Philip could make an old Hondo sound swell😮
Does anyone know what the PRS LP style with 2 f holes behind Phillip is?
PRS 1137 Singlecut Hollow body
When will it be available I want one
Sure wish I knew the PRICE!!!
Company hasn't released it yet. Probably $999 or $1299.
i own 3 guitars made by Cort Ibanez RG7421, When Cort was still in Korea Dean Avalanche 7(2002) Dean Evo Dragster (2006). Hey Do you know who making guitars for dean in india like my mdx?
Couldn’t they find a really bright white for those pickups???
Those fishman sound so good