How to make Bluetooth amplifier Using TPA3116D2 Amplifier board

Поділитися
Вставка
  • Опубліковано 7 січ 2025

КОМЕНТАРІ • 74

  • @mahendrasinghbisht5697
    @mahendrasinghbisht5697 Рік тому +1

    Bhai gajab yr ❤❤❤❤😮

  • @rajverma-fi8yt
    @rajverma-fi8yt 4 роки тому +2

    You are awesome bro.

  • @amitsonwane1287
    @amitsonwane1287 2 роки тому

    Very good looking built. But the major concern...Power supply must be inside the cabinet. To use smps in open is a bit risky as the 230 v input is open

    • @randomlyrics8402
      @randomlyrics8402 2 роки тому +1

      Wtf r u taking about? It was clearly a dc input

  • @fayanshorts
    @fayanshorts 3 роки тому

    8:20 using very thin wires for ac voltage with high amperage could melt the wires and set your house on fire. So Please Use Higher Gauge Wires

  • @rgscritti4213
    @rgscritti4213 2 роки тому

    Hello!
    I wanted to ask you:
    1 The white wire that you see at 4:45 where can I find it? In the video you need two.
    2 Is the fan necessary? Or is it OK to drill a hole?
    3 Can this project be connected to the computer?
    4 Is it OK to use the 12v connection to charge my mobile phone?
    5 I have three speakers:
    two 25W
    one 5W
    Can I connect them? Or do I need more powerful speakers? Thank you!

  • @nagarajunaga5567
    @nagarajunaga5567 4 роки тому

    Super,,sir,,,My,,is,,Nagaraju,,,

  • @funnyvideo81946
    @funnyvideo81946 3 роки тому

    Sir hum 7805ic use karte h blutooth ke liye to hmare power supply ka volteg Kam to nhi ho ga amplifier ke liye jo hum power supply de rhe h amplifier ke liye

  • @rc5406
    @rc5406 4 роки тому

    Hello, this 7805 transistor, can I put 24v at the input?

  • @cubegallery2611
    @cubegallery2611 4 роки тому +1

    Can I use 24v 6a -4a power converter module Plzzzzzzz reply as soon as possible

    • @cubegallery2611
      @cubegallery2611 4 роки тому

      There is any problems when I use 24v 4-6a module.it cause over heat and damage any parts of the modules

    • @s.infinitycreative3665
      @s.infinitycreative3665  4 роки тому

      No, 12v DC Power

    • @dong9531
      @dong9531 4 роки тому

      @@s.infinitycreative3665 can i use motorcycle battery as power source ?

  • @russellman1281
    @russellman1281 4 роки тому

    I have 2 4 wat speckers.
    2 TPA3118 PBTL Mono DC8-24V 60W Digital Audio Amplifier Board to drive the speckers.
    1 19.5 v 90w max power adapter.
    1 12 v 2500ma laptop power adapter.
    Will the 12 power sapply 2.5 A be good aneff to drive both Amplifier Board?
    Will the 2 TPA3118 PBTL Mono DC8-24V 60W Digital Audio Amplifier Board get hot?
    My son says I need 100w and 15 to 20 amps to drive the 2 speckers. is that so.

  • @rc5406
    @rc5406 4 роки тому +2

    Hello, if I use a 24v source, should I put two 1k resistors in series for the led?

  • @jakk2ahao
    @jakk2ahao 4 роки тому

    I am using the same board and strange that the 3.5mm output is better than the mp3 module...do i need preamp for mp3 module?

  • @BettieBoeBoeppidoe
    @BettieBoeBoeppidoe 4 роки тому

    Superglue is your best friend!!

  • @parashar_naveen
    @parashar_naveen 3 роки тому

    Can i use 10 inch subwoofer with computer SMPS it has written 12v 22amp For this amplifier?

  • @Mr_Ovii
    @Mr_Ovii 3 роки тому

    Can we play it with inverter battery

  • @casavillahermosa5642
    @casavillahermosa5642 3 роки тому

    where do you connect the fan

  • @uttpalkant
    @uttpalkant 4 роки тому

    Can i use this kit ups transformer 19v 10amp

  • @AveEditz
    @AveEditz 2 роки тому

    mai ye amplifier buy karna chahta hu 🙂 . price?

  • @nabiya5220
    @nabiya5220 4 роки тому

    Can i use three speaks 30W + (10W ×2) 4ohms

  • @ashaninduwara9919
    @ashaninduwara9919 3 роки тому

    8:20

  • @satyanarayanamaheshwaram4176
    @satyanarayanamaheshwaram4176 4 роки тому

    Super

  • @Serafettincoskun716
    @Serafettincoskun716 4 роки тому

    Test edilirken içinde Neşet ertaşın "Hep senmi ağladın hep senmi yandın" eseri yoksa boşuna kürek çektiniz.

  • @jennytapia913
    @jennytapia913 3 роки тому

    Hola amigo De qué material hiciste la base

  • @cemonggemoy9714
    @cemonggemoy9714 2 роки тому

    12v only give you 15watt output for 4 ohm speaker and 19 wattt for subwoofer. If you run for 12v, better use pam-8610 instead. It 's cheaper within the same performance. So you have to run 24v to max it performance. Many seller sell this board within fake chip, usually fail when running on 24v. Read the datasheet how many pins are the original one.ll
    12v 10A smps is wasting money too, 3A is enogh,

  • @rohitbaktariya92
    @rohitbaktariya92 4 роки тому

    Can I use 10 inch subwoofer 80watt

  • @aakashdixit6939
    @aakashdixit6939 5 років тому

    Tpa3116d2 board par kitna ohm ya watt ke speaker or subwoofer chaliya

  • @Albertolucas12
    @Albertolucas12 Рік тому

    Está sendo qual alimentação,como suportou tpa e a placa 12v

  • @pankajmandal3267
    @pankajmandal3267 5 років тому

    which resistor in led? how much power?

  • @ieltsjohnacademy8081
    @ieltsjohnacademy8081 5 років тому

    What is the size of the speakers and subwoffer

  • @ritaisabel8665
    @ritaisabel8665 5 років тому

    good

  • @fskaudio2726
    @fskaudio2726 5 років тому

    how many amperes/volt is the power supply?

  • @aakashdixit6939
    @aakashdixit6939 5 років тому

    Ye wood kon se h

  • @phamhiep3245
    @phamhiep3245 4 роки тому

    Trông lởm thế mà cũng làm clip à . Chỉnh chu sản phẩm chút đi nhé.

    • @KeKoten321
      @KeKoten321 4 роки тому

      Mày hay thì làm hộ một cái y vậy đi tao zo like cho, dm xem chùa còn đòi hỏi dm...dm...dm...dm

    • @phamhiep3245
      @phamhiep3245 4 роки тому

      Vô học ... Mày thích nói kiểu vậy tao cũng k khách sáo.... Nghe ý kiến để mà nâng cao tay nghề... Chứ loại mày kiểu vậy thì mãi là thằng nông dân ...loanh quanh ao làng . Mày nghĩ mấy cái trẻ con này khó quá à.... Chỉ như kiểu chế cháo con nít thôi. Bố mày làm cả những loại 400 ,500 w.... Bluetooth gỗ tự nhiên,đánh cạnh đàng hoangt còn chưa ăn nói bố láo như mày....!

  • @tigeratboarder4928
    @tigeratboarder4928 4 роки тому +5

    Bro, pls give that Player. I'll Pay Money.

  • @nanaksingh6541
    @nanaksingh6541 4 роки тому

    Is me aawaz wale 10 inch ke
    speakers lagake dikhao please

  • @suspicious90600
    @suspicious90600 4 роки тому

    Bro someone please help me... I'm using this kit now but Bluetooth module lagane k baad kam aawaz deta h aur bina bluetooth module k yani ki direct bajata hu aux se to jayeda aisa q yrr (bluetooth module se connect krne k baad bass bilkul v nhi aa rhi )

  • @hedef28
    @hedef28 5 років тому

    fm radyo 📻 çalışıyor mu böyle anteni yok ama

  • @naveenshirur8170
    @naveenshirur8170 3 роки тому

    circuit diagram plz sir

  • @renupoddar867
    @renupoddar867 4 роки тому

    Amplifier board ka silai aur kitne ka hai

  • @arjayhernandez3512
    @arjayhernandez3512 2 роки тому

    diagram please

  • @channaveeraswamydivan4159
    @channaveeraswamydivan4159 4 роки тому

    Cost please

  • @mcmtdirector7611
    @mcmtdirector7611 5 років тому

    24 0 24 5Amp transformer chalega sir

  • @munirajum1905
    @munirajum1905 4 роки тому

    Plse send wiring diagram

  • @paromitagupta9296
    @paromitagupta9296 4 роки тому

    What is the song name

  • @lmuthukumar9462
    @lmuthukumar9462 4 роки тому

    How much bro

  • @shariqsiddiqui1073
    @shariqsiddiqui1073 4 роки тому

    bhai mujhe ek aisa board chahiye jisme speaker laga de aur laptop ya mobile se aux connect karde, lekin saath mein us board mein 3.5mm jack bhi ho taaki jab kabhi raat mein ya game khelte waqt us board mein headphone laga le to automatic speaker ki awaaz switch hoke headphone mein aane lage, same jaise laptop mein hota hai, ki laptop ka speaker chalta rehta hai lekin jaise hi koi headphone lagate hain, to awaaz headphone mein aa jati hai aur laptop ka speaker band ho jaata hai, please reply brother ?

  • @akashshamkuwar6596
    @akashshamkuwar6596 5 років тому

    Can i give 24 volt 10amp

  • @promilaroy3345
    @promilaroy3345 3 роки тому

    ap video me batt kiyu nahi karte

  • @romanengelbrecht6717
    @romanengelbrecht6717 3 роки тому +1

    Barely labeled or identified anything so basically we just watching you do stuff it's not a how to video

  • @cezarfr4506
    @cezarfr4506 3 роки тому

    MUCHO GASTO, Y TRABAJO, Como todos los proyectos de youtube. Primero hagan cuentas y después procedan. Yo compre un modulo con las mismas características y le hice cubierta de acrílico y como también traen el mismo tipo de salidas con 3 controles, solo le conecte unos viejos bafles y listo. No trabaje tanto ni gaste y tengo mejor sonido que con las puras bocinas.

    • @cezarfr4506
      @cezarfr4506 3 роки тому

      Lo comento porque en youtube aparecen proyectos casi imposibles o inadecuados. En otro me puse a hacer un destornillador que me salio mas cara y muy trabajoso, ya que usaban impresora 3d. Cuando ya los venden hechos y mas baratos. Cuidado. Proyecto muy ingenioso, pero impractico.

  • @munirajum1905
    @munirajum1905 4 роки тому

    Where to give cooling fan

  • @cesarberumenlarios4650
    @cesarberumenlarios4650 4 роки тому

    you forgat to show the aux in put ();-)