Thanks, this video helped met a lot for this repair on my Peugeot 106! I needed something much ticker than a nail and used a short flat head screwdriver.
Thanks for these very good vids on the Picasso. The job in this video will save me at least 200 euros. That is what the garage says it will cost to fix it. Thans @Furulevi!
you can get to the closer and remove it just by taking the speaker out it saves dismantling the door panel and breaking the tabs that hold it on and its a lot quicker,been their and done it,
All is clear, thanks ! But WHY you detach the door interior panel ? As I saw, all the operations were made through the loudspeaker hole, which releases after it was detach. Всё понятно, благодарность!!! Но зачем было снимать панель двери ? Все операции проделаны сквозь отверстие от динамика, которое стало доступным после снятия самого динамика.
Hahaha thumbs up i have to check these in all my door none of them stop 😂😂😂 will start with driver side better cause every time it hits the wall when i opened it 🤗
No need to remove the door panel at all just remove speaker and put your hand in there to remove and remove the complete unit after undoing 2 screws and 2 nuts from the door near the hinge simple by the way the restricter arms are different lengths for front and rear doors
Good video. but one question ! Why do you remove door card ? "swing stop" easily take off throw the hole behind door speaker ! You need screw out two opposite crew and pull out hole element throw the hole behind the door speaker
Muy bonito si, pero no se ve como insertas la pieza con el mástil de la puerta. Tanto detalle y luego te saltas un paso difícil. A ver si al próximo no te pasa. Saludos.
thanks for the video again it was really helpful. I have just bought a new one off Ebay for £24. I was thinking perhaps its possible to remove the old one by just taking out the door speaker,and getting in through there ? will find out when it arrives.. thanks Conan
@@furulevi thanks for the video! I'll replace all the piece (including the hook); do you know which size of torx is needed it to unscrew the big bolts on the chassis? thanks, Gustavo
Thanks, your video helped met a lot for repairing on my Citroen C3!
Thanks, this video helped met a lot for this repair on my Peugeot 106! I needed something much ticker than a nail and used a short flat head screwdriver.
Thanks for these very good vids on the Picasso. The job in this video will save me at least 200 euros. That is what the garage says it will cost to fix it. Thans @Furulevi!
you can get to the closer and remove it just by taking the speaker out it saves dismantling the door panel and breaking the tabs that hold it on and its a lot quicker,been their and done it,
Dude, you will save me a lot of money with your vids. Thank you so much!
Dobar tutorijal, hvala.
Все Ваши видео мне очень пригодились, большое спасибо! All your videos are very useful to me, thank you very much!
Форсаж Channel كيفية صيانة كوفر ك
زار
Very good video. Good cam work and a lot of care showing the details. Keep up the good work. ;-)
Thank you for the video. Now that I know what it is, I will try and remove the bar until I can get it fixed.
Great Video Thank You I have the same problem with my car different door but same problem.
Well done, thanks!
All is clear, thanks ! But WHY you detach the door interior panel ? As I saw, all the operations were made through the loudspeaker hole, which releases after it was detach. Всё понятно, благодарность!!! Но зачем было снимать панель двери ? Все операции проделаны сквозь отверстие от динамика, которое стало доступным после снятия самого динамика.
So much useful! Thank you.
Much appreciated for your video. Helped me out with the nail trick. Not long compleated the job .best regards james
Все просто и доходчиво,большое спасибо автору.
Great video. Thank you.
Thank you. I'll fix mine tomorrow 👍
Well done.
Thank you! Helped me alot
Hahaha thumbs up i have to check these in all my door none of them stop 😂😂😂 will start with driver side better cause every time it hits the wall when i opened it 🤗
thank you for the good videos you uploading
Bravo grazie mille
Thanks for this video. Job now done! ;-)
Great vídeo, thaks for share it !!
Hello Is it possible to access just through the sound speaker hole, without having to dismantle the door?
Ecellent !! Thanks boy!
Thanks!
No need to remove the door panel at all just remove speaker and put your hand in there to remove and remove the complete unit after undoing 2 screws and 2 nuts from the door near the hinge simple by the way the restricter arms are different lengths for front and rear doors
great video ! How do you pull out a door stopper without taking the panel off ?My 02 tahoe has encountering this problem....
Find an opening... at the speaker maybe.
Thank you
Good video. but one question ! Why do you remove door card ? "swing stop" easily take off throw the hole behind door speaker ! You need screw out two opposite crew and pull out hole element throw the hole behind the door speaker
Now I'm not sure why I removed the door panel, maybe for easier access...
Александр Люлько good question you have there done same with nine .I'm about to try and fix it .got a knackered roller
nice video, i have peugeot 206 and i hope this will help me :D
Jó videó
Muy bonito si, pero no se ve como insertas la pieza con el mástil de la puerta. Tanto detalle y luego te saltas un paso difícil. A ver si al próximo no te pasa. Saludos.
Why did you remove the door upholstery if you did the repair through the speaker hole?
Maybe I though I will have easier access to the inside of the door :)
oh my gord ,this just what mine is doing
Király vagy !!!!
Nem lett volna könnyeb ha leszereled a másik oldalról a két csavart és utna vissa teszed az egészet egy darabban????
The passenger door making that noise is also wrong, it needs greasing, there should not be an audiable snapping noise.
Probably it is worn out...
Ya pas besoin d'enlever le plastic il suffit d'enlever la baffle (speaker ) et glisser sa main
search at an auto dismantling company...
Po roku popsuło się do końca i już nie strzela ale ogranicznik też nie działa 😅
thanks for the video again it was really helpful. I have just bought a new one off Ebay for £24. I was thinking perhaps its possible to remove the old one by just taking out the door speaker,and getting in through there ? will find out when it arrives.. thanks Conan
Yes you can remove the old one, it is held by 2 nuts and bolts, visible at 0:52.
@@furulevi thanks for the video! I'll replace all the piece (including the hook); do you know which size of torx is needed it to unscrew the big bolts on the chassis? thanks, Gustavo
The bolts on the chassis are T40
Mon amis le problème dé clic c'est à cause de deux boulons de cette pièce que tu a demanter .j'ai le même problème sur ma Xsara 2 problème résolu.
Comment faire?
what are u using the Software to edit your video ? are u using sony vegas or adobe priemere or other ?
Most of the time I use Sony Vegas Pro, and rarely Premiere Pro.
+furulevi ok
CAPO!!!
NIC special negotiate his pokazales
so what was the cause of the problem,,did I miss it ?
On this car, one side of the swing stop mechanism was not in its original place, it was inside the door, visible at 5:49. (it's a second-hand car)
many thanks,,,Conan
saunu gera pamoka
Dude.
Que forma de perder el tiempo mostrando cosas que no importan por alargar el video