DIY Screen Printing Drying Cabinet for Around $100
Вставка
- Опубліковано 8 вер 2024
- I made a DIY screen drying cabinet for screen printing for around $100 plus some scrap wood I had lying around. #screenprinting
Thermometer/Humidity Guage: amzn.to/3H7PGkW
Dehumidifier: amzn.to/3Lp6WEP
Power Source: amzn.to/3Alf4zQ
Heater: amzn.to/41SQKB7
Fans: amzn.to/40uH9PP
Looking good! Excellent build!
Thanks for checking this out. Good luck on your screen printing journey!
hi, is it important to have a separated space inside a cabinet for Dehumidifier?
I don't think a separate area is necessary, I have seen the dehumidifiers behind or underneath the cabinet as well.
How fast do the Fans Spin? Do they run the Full 12v ?
Im honestly not sure.
I currently have the issue that my humidity wont drop below 50%, i have the same dehumidifier and 1 fan blows air in on one side while the other blows air out on the other side. They turn the same speed and I have a Voltage Regulator so I can change how fast they should run. I am not sure if the speed has something to do with the humidity not dropping below 50@@screenprintingonabudget9208